Discussion request to anyone using TES 6.1.0.x

Hello:
I know that everyone has very busy day's however if you are currently using TES 6.1.0.x I would like to have a discussion with you on how the product is working for you. We are in the process of testing for upgrade from TES 5.3.1.x and have run into some issues I would like to hear from the community if anyone has already gone thru the upgrade and how its working out. I'm also interested to know if you are using Transporter.
If anyone could take some time out of their day to give me a call it would be greatly appreciated, note I am in the mountain time zone.
Regards,
Ceceil Rufo - Lync Phone# 443-542-4612

Similar Messages

Discussion Forum Portlets - Anyone using in Production?

This is a followup to another post.
Is anyone using the sample Discussion Forum and Discussion Forum Admin portlets provided in WebLogic Portal 8.1 in a production environment? I've already received feedback from one person who had difficulties and decided not to use them, but I wanted to know if there were any success stories.

Bryan,
I also put a lot of weight in Tom’s posts; I am however convinced that contacting Oracle Support is a better solution for direct, bug related questions. I do, for example not doubt that his human tasks did not work when put in parallel flows. There might be workarounds, such as putting the human workflow stuff in a separate service, but to me sounds like a bug and bugs should be reported, analyzed, and fixed.
As you can see from my profile, I do not live in Poland so I do not know about the training situation there, but I have, personally, delivered five SOA Suite classes so far during 2007 and I know that I am not the only one running SOA training in Sweden. I might be wrong, but based on my own experience, I have assumed that the lack of training that Tom is experiencing is due to communication problems, and that contacting Oracle Education would sort things out. (Training in Europe tends to be given in the local language. A quick look at the web shows that the next 5 day SOA Suite training in Poland seems to be scheduled for November 19th.)
On the topic of frequent changes in interfaces as mentioned above, I agree that an update of the table structure in a database must never cause business process updates. If that is the case, the architecture most likely suffers from tight coupling. I never recommend anyone to use adapters direct from BPEL try to but use (coarse gained) services published on the service bus as much as possible to avoid such problems. For an introduction to SOA best practices see (for example) Dave Schaffer’s 7 Steps to SOA in SOA World Magazine.
I am sorry if you feel that my posts are not providing the level of support you where hoping to find. Perhaps it is our expectations community/forums vs official product support that differs. Regarding whether Oracle has figured it out or not, you do not have to trust me – take a look at what InfoWorld or Forrester are saying.

Best, 
Mathias

Anyone using an HP LaserJet Pro CP1525nw printer with SL?

I'm thinking of getting this printer. Can anyone using this with Snow Leopard please let me know how well it works? Any issues? Nice printer? I will be replacing a Samsung CLP-315 which prints very nicely, but doesn't work well after updating from Tiger to SL.
Thanks

It works just fine. I picked up a 1525 yesterday, configured it using Lion, and I just now configured my wife's SL laptop to work with it. No problems. Just don't install the HP disk and let OS-X grab drivers for it and you should be fine.
It's a little tricky configuring with Lion for wireless printing, but it's doable. See my post at https://discussions.apple.com/thread/3449512 for a checklist.

New Discussions: for day time use only? (-: A darker blue, please!

Thanks a lot Mods for your efforts.
I spend some time on these boards every day, so I can see things are going better and better.
I like the new Discussions better than the previous, especially everything that comes with this new ability to put much more on one page (like being able to see A LOT (not only five) of "Recent topics in this category", or that the topic's titles can be longuer than before, or being able to read the whole thread without jumping to "the next 15 posts" like before. I set "My Posts" to "50", this too was not possible before. Etc.)
Now my request:
At first I thought, like many others, that the "blue dot" and the "blue half-dot" were too small, and that we couldn't see the small grey "New!" because it was not red.
Now after all this time since Nov14, I finally understood what was wrong, because
(1) the new kind of eye fatigue I didn't experienced before, and
(2) a change in my computer's room lighting configuration.
The real problem is not the blue dot size (altough I'm sure if it was a square it would work better), it is its environment.
We have a white line after a light blue line, and this is a great feature to differenciate between topics. Works great within a thread too, to differenciate posts.
But one side effect of this is that the whole page "feels" slightly blue.
I'm not sure, but a human eye physicist could perhaps explain another kind of (more insidious?) side effect caused by the alternance of lines. Perhaps depending on which color are chosen for them?
Anyway, there is no problem with a page that "feels" blue, when the text is black.
The problem starts when the text ALSO is blue. Especially light blue...
I find the text blue color too light. Even the "visited link" purple is too light.
Given that the background is blueish, I mean. Otherwise it'd be fine.
This was not easy to understand, because the [defect/effect] is not obvious: the overall picture is nice.
But it became obvious to me when I saw that I have no problem IF I set my screen's brightess to "very bright".
New Discussions: for day time use only?
==> Please, would it be a problem (or too difficult to set perhaps?), to try a darker blue text for two or three weeks, see if we like it better? (along with a slightly darker purple for the visited links).
Thanks again for all the great work!
Axl

Hi Axl,
Some one had posted this about color,I do not remember who,sorry.
I thought it was interesting.Hopeful this color issue can be alter but deepening the colors as you & many have requested.
http://www.grc.nasa.gov/WWW/usability/colorcss.html
Good luck, Eme

What kind of throughput should I expect? Anyone using AQ in high volume?

Hi,
I am working with AQ in a 10.2 environment and have been doing some testing with AQ. What I have is a very simple Queue with 1 queue table. The queue table structure is:
id number
message varchar(256)
message_date date
I have not done anything special with storage paramteres, etc so it's all defalt at this point. The I created a stored procedure that will generate messages given message text and number of times to loop. When I run this procedure with 10,000 iterations it runs in 15 seconds (if I commit all messages at the end) and 24 seconds if I commit after each message (probabliy more realistic).
Now, on the same database I have a straight table that contains one column (message varchar(256)). I have also created a similiar storage procedure to insert into it. For this, 10,000 inserts takes about 1 second.
As you can see there is an order of magnitude of difference so I am looking to see if others have been able to achieve higher throughput than 500-700 messages per second and if so what was done to achieve it.
Thanks in advance,
Bill

Yes, I have seen it. My testing so far hasn't even gotten to the point of concurrent enqueue/dequeue. So far I have focused on enqueue time and it is dramatically slower than a plain old database table. That link also discussed mutliple indexed organized tables being created behind the scenes. I'm guessing that the 15X factor I am seeing is because of 4 underlying tables, plus they are indexed organized which adds additional overhead.
So my question remains - Is anyone using AQ for high volume processing? I suppose I could create a bunch of queues. However, that will create additional management on my side which is what I was trying to avoid by using AQ in the first place.
Can one queue be served by multiple queue tables? Can queue tables be partitioned? I would like to minimize the number of queue so that the dequeue processes don't have to contain multiplexed logic.
Thanks

Has anyone used Migration Assistant to move services from one system running Server to a new system?

So, I've purchased a Mac mini to replace my aging Mid 2009 mini on which I've been running Mavericks Server. In trying to answer the question of how best to move services from the old machine to the new, I've stumbled into the fact that Migration Assistant can apparently migrate not just user data for workstations and laptops, but also service data for servers. The problem is there isn't much detail in the docs about how good a job it does when going from one machine to another without changing OS releases. There's a very detailed document in the KB about going from older versions of Server to new (OS X Server: Upgrade and migration from Lion Server or Snow Leopard Server) and a general doc on migrating from another Mac under Mavericks (OS X: How to migrate data from another Mac using Mavericks) but that has no details about Server.
Has anyone used Migration Assistant to move services from one system running Server to a new system? Are there any details that are particularly important to get right? Are there things that require manual steps after Migration Assistant is done?
There are other ways I could tackle the problem, of course. I could simply swap drives between the systems, but the new system has two drives that are bigger, faster, and I intend to mirror them. That would complicate such an approach. I'd really like to keep the conversation constrained to a discussion of Migration Assistant as the primary method.

yes. I migrated a server frm lion to mavericks following these notes a while back:
OS X Server: Upgrade and migration from Mountain Lion
i do not recall having any problems with it.

ITSM Service Request - Assigning Categories - Using Function Module

Hi,
We are trying to create an ITSM service request ticket from ECC, based on a workflow and its logic. I am calling a remote function module which will contain the logic as explained below.
I am creating a CRM ITSM service request(incident) ticket using function module CRM_ICSS_SRVREQ_CREATE.
The ticket is created but some of the fields that I need to populate in the transaction do not have an interface in this function module. I want to specify the category 1, category 2 and category 3.
I tried function module CRM_ORDER_MAINTAIN but I am unable to find the interface where I can populate this particular data. The component used here is btcategories/categories.
Can anyone suggest where this particular data needs to be populated.
Thanks,
Abdullah

Hi Abdulla
What parameter did you set for "Reported By" and "Message Processor" in the FM CRM_ICSS_SRVREQ_CREATE. I am having a lot of problems regarding this. Can you please help?
Thanks
Saumyendra

How to delete requests in PSA using Process chains

Hi All,
Can anyone explain me how to delete all the requests in PSA using Process chains.
This is what I did...
1. use Process type 'Deletion of Requests from PSA'
2. Settings:
Object Type - PSA table
Object Name - <Datasource name>
Older than - 0 (Zero) days
These settings doesn't work. Can you please let me know exact settings to use for deleting all the requests in PSA of a datasource.

Hello Praveen,
That's what I thought too. But if I use '1' one day, what if I need to run it twice same day? So this doen't work for my requirement.
Any other suggestions?
Thanks.

Anyone using 1and1? Disappointed in iWeb and MobileMe

I designed a website for my professional services in iWeb but then learned about its limitations here in the Apple discussions. I'm thinking of using 1and1 and their templates. I want to produce brochure ware about my services with an interactive contact us page (iWeb doesn't have and I'd need to add html code/tweak -- seems like form generation ought to be standard) and to have a blog. Fairly simple -- not selling anything online -- although eventually it'll be nice to have a forum or to have blog commenting capability. I'm also hoping that the web host has some decently designed templates.
Has anyone used 1and1 as a webhost? Are you using a Mac friendly web host? What your experiences? I've seen Mac friendly web hosting sites. Any recommendations and words of wisdom are welcomed about what to look for and look-out for when using such services.

What's the point of coming to an iWeb discussion group and asking for information on template based hosting? The whole reason for using iWeb is to allow you the freedom to design as you wish, without having to deal with bland design and restrictive layout. Form generation is standard. iWeb doesn't do it.
I work with several sites that are using a perl script in a cgi-bin directory to handle custom contact forms. I do the actual form in Dreamweaver (there are many other programs that can do this), and paste the code for the form into an HTML widget on a "Contact" page.
After setting up the site for a Mac user with iWeb 09, I provide them with the iWeb site file and tell them to have some fun. Just leave the code alone for the contact form itself. You can change everything else on the site including the Contact Page, as long as you don't mess with the contact form code.
I use Cyberduck to upload the perl script to the cgi-bin directory on a standard linux based hosting site like seanic.net and the user gets to use iWeb to make all of the future updates and new pages when they want.
Dealing with tech support on a hosting site, that doesn't really know how iWeb (or many other site building programs work), will drive you nuts. You may do better to find someone to assist you with your initial domain setup and original site pages so that you can have fun with the design instead of dealing with all of the other issues.

Has anyone used DETOX MY MAC and can it be trusted

My Mac Mini n now running very slowly, its difficult to open up anything, and starts up really slowly. In general its just a pain. For a week now I can't open my emails in AOL, I can see them but can't open them.
I have thought about DETOX MY MAC but I am worried that I will just be downloading more problems. Has anyone used it and can it be trusted
Thanks Ann

Don't install such "utilities." They're all scams.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Has anyone used the program 'MacKeeper' and what is your take on it?

Has anyone used the program 'MacKeeper' and what is your take on it?

Do not install MacKeeper (and how to uninstall it if you have):
https://discussions.apple.com/docs/DOC-6221
(Please note that references to the original developers, Zeobit, also now refer to Kromtech Alliance Corp, who acquired MacKeeper and PCKeeper from ZeoBit LLC in early 2013.)

Has anyone used the mackeeper program by zeobit

has anyone used the mackeeper program by zeobits

Read the user tip below.
https://discussions.apple.com/docs/DOC-3036

Has anyone used Macspeech Scribe for Mac? It is similar to Dragon.

Has anyone used Macspeech Scribe for Mac? It is similar to Dragon. Does it work and is it reliable?

This post by Karsten shows several of the major alternatives, including a free one.
I have no experiece good or bad with the one you mention.
https://discussions.apple.com/docs/DOC-3711

Has anyone used the Speck See Thru Case and scratched the MacBook Pro?

Has anyone used the Speck See Thru Case and scratched his/her MacBook Pro?

Read this thread: https://discussions.apple.com/message/8769665#8769665

Anyone using either Camera: Logitech / Microsoft?

I am considering buying a webcam w/microphone for my PowerMac.
I have looked at two:
Logitech STX
http://www.logitech.com/index.cfm/webcam_communications/webcams/devices/352&cl=u s,en
and the
Microsoft VX-3000
http://www.microsoft.com/hardware/digitalcommunication/ProductDetails.aspx?pid=0 01&active_tab=systemRequirements
Anyone using these cameras with success?
I am used to my DIgital camera, but it keeps falling off the monitor
Dwaine
PowerMac Dual 2GHz G5 Mac OS X (10.4.9)

Hello Singitloud
With 10.4.9, if you decide to buy a USB webcam, you will want a "UVC" camera. Which manufacturer's UVC cam is a matter of your choice, but be sure to look for a "UVC" model so you do not need to add additional drivers. You can find some more info in this post:
http://discussions.apple.com/message.jspa?messageID=4266538#4266538
If you plan to use your webcam with iMovie, too, you will want a Firewire model. iMovie (and other apps that require Firewire DV input) will not be able to use the USB cams, including the new UVC ones.
There are a couple of currently available Firewire cams listed in this post by Defcom(UK) here:
http://discussions.apple.com/click.jspa?searchID=-1&messageID=4684786
Cheers,
Jim
Mac OS X (10.4.9) G5 DP 1.8 External iSight

Discussion request to anyone using TES 6.1.0.x

Similar Messages

Maybe you are looking for