Discussion: The usage of Inspection Points

Hi Experts,
Talking about the INSPECTION POINTS, what kind of usage could it be ?
In some occasions,  it can be used as an sign that distinguish each delivery from the production line to the QM dept.
How about any other way to use it?

An inspection point is an identifiable record of inspection results that is assigned to a work or inspection operation. Several inspection points can be assigned to an inspection operation.
With inspection points, you can have several inspections and can record multiple sets of characteristic results for an operation.
Inspection Points for Inspections During Production
If you inspect during production using routings, rate routings or master recipes and you want to record inspection results in specific intervals, choose the inspection point type Free inspection points in production. You can define your own field combinations for this inspection type in Customizing.
Inspection Points in Goods Receipt
If you carry out goods receipt inspections with inspection points, choose the inspection point type Free inspection points in production. You can create your own field combinations for this inspection type in Customizing.
Inspection Points in Plant Maintenance
If you carry out calibration inspections and want to record inspection results for equipment or functional locations, choose the inspection point type for Equipment or Functional location. You can create your own field combinations for these inspection types in Customizing. However, the field Equipment or Functional location must exist in the field combination.
Inspection Points in Sample Management
If you use the sample management functions in a goods receipt inspection, or inspection during production with planned physical samples, each sample number is uniquely identified by an inspection point. Choose the inspection point type Physical sample. You can create your own field combinations for this inspection type in Customizing. However, the field Sample must exist in the field combination.

Similar Messages

  • QM Inspection Points

    Gurus
    I require that inspection points should be created automatically for inspection lots when i view QA32
    To do so i have done settings in SPRO > QM > Quality Planning > Inspection Planning > General > Define identifier.
    Here i kept 2 under field Time for field combination 150 assuming system will create inspection points every 2 hours automatically but i cannot see inspection points created
    Where am i missing? Please reply
    Regards

    Dear,
    Have have to assigned inspection characteristics in routing that will be your in process inspection
    When you Release the order the inspection lots will be generated.
    Please maintain the Quality management Inspection point on the operation details and select time related. For Inspection point completion select Quantity, Valuation and Confirmation(Production).
    mention the time as 1 and unit a HR (Hour).
    You can record the results for every hour.
    But if you are not doing inprocess inspection & inspection with GR in that case you have to create insepction plan for material assign inspection type as 04 in material master
    Now for hourly analysis this you can enter by selecting scope not fixed & single value in master inspection characteristics
    You can enter time & other deatils of sample by using inspection point in inspection plan.
    Or else QAPP_CUST_IP_CREATE for generation of automatic inspection points.
    Then it will work for you.
    Regards,
    R.Brahmankar

  • Inspection point in SAP QM

    Dear  Sir
    My query is related to SAP-QM
    1,How to define INSPECTION POINT in Inspection planning?
    2.Where is default setting of Inspection point like at Plant level & material level?
    3. If inspection point of material is changed in Tasklist and a new inspection lot is generated then it again reflect both the Inspection point (the new one & the old one).So how to aviod this problem so that it shows only the new inspection pont at the time of Result recoding.

    Hello Alpana,
    question 1 How to define INSPECTION POINT in Inspection planning?
    In the transaction QP01 or QP02 you can define an inspection point at header level.
    This can also be done for production plans and process instructions.
    The inspection point definition is done in the customizing of the Quality planning.
    question 2 Where is default setting of Inspection point like at Plant level
    This can be found under the customizing point Basic settings in QM.
    Using the settings at plant level it is possible to define inspection points at plant level.
    If you want to use the setting at material level then this would be done in the inspection plan.
    question 3 If inspection point of material is changed in Tasklist and a new inspection lot is generated then it again reflect both the Inspection point?
    The changing of inspection points is not possible (Inspection point definition)
    The changing of inspection points in inspection plans is not recommended create a new plan in this case.
    I hope that this information helps you resolve your issue.
    Regards
    Isabelle

  • Quantity based Inspection points

    Dear Gurus
    In the master recipe,i assigned inspection points (Insp. Points         150        Generated insp. point, quantity or time) and characteristics also assigned in that operation(for  QM control key QM02). My requirement is each 50kg i want a inspection lot but in the master recipe & process order operation details no such Quantity entering field is not there. How can i get this?...
    Note : 03 inspection type also activated in the mat master

    Dear Anupama
    Inspection point doesnt mean that you will get 5 inspection lots. Inspection point means you will get option for entering results 5 times through points. you can get the points through QA32> Result recording> Pop up> click on Assigned inspection point. You will get the list of inspection point> click on any one of them it will take you to result recording
    Hope this is clear
    Regards
    Gajesh

  • Change results in Inspection Point

    Dear All,
    I did the results recording using qe51n for three inspection points in one lot. i also did the force completion and the status is in 5. Now i want to change the result in one inspection point. How do i do that?
    QA22 or QE71 doesnt do it?
    Regards,
    DTD
    Edited by: TMDTDSL on Aug 17, 2009 8:18 AM

    There would be Tab called Assigned Inspection Points, when you are doing Results Recording. Click on that TAB you will get to select the Inspection POint for which you want to record again and ther on you can Unlock and change the results.
    To reach up to this, right click on the already assigned inspection point and you will have the option, as suggested above

  • Inspection point in SAP4.0B

    Dear QM experts,
    In SAP version 4.6C, I have setup inspection point type - 'Freely defined inspection point' which I used for my quality inspection after goods receipt.
    Therefore, I setup the necessary setup in the Inspection plan header and operation level.
    However, in another system, SAP version 4.0B, I realize the 'Freely defined inspection point' does not exist. Instead, I tried using 'Inspection point for inspection during production' but when I update the 'Inspection point' in the Inspection Plan header, I get an error message - Inspection point Z01 (type ) is not allowed for this task list type (Q).
    I can't seem to find any config. which is missing. I did the same configuration as 4.6C.
    Please advice how I can use 'Freely defined inspection point' in Inspection plan in SAP 4.0B.
    Advice is much appreciated. Thank you.

    Hi Bee,
    As i have not that much hands on SAP releases 5.0 and olders. But what i can clearly see is, there is some change implemented in the new releases that don't constraint to assign inspection point 100 to tasklist type 2.
    And the check is there for object, CP_DA_TSK_CHECK and CP_DA_TSK_CHECK - checks if inspection points are allowed for given task list, that is responcible for the error message QP289. That is a wrokround done by me. You can compair the code for the check with your program and may rectify the issue.
    The code is as below for - CP_DA_TSK_CHECK
    FORM tsk_inspection_points_check
          USING
           i_plnty                  LIKE tsk_class_data-plnty
           i_tsk_slwbez             LIKE tsk_class_data-slwbez
           i_tq79                   LIKE tq79
          CHANGING
           e_flg_tsk_check_aborted TYPE c.
      DATA:
        l_qm_ip_type_allowed LIKE tsk_class_data-qm_ip_type_allowed.
      CLEAR e_flg_tsk_check_aborted.
      PERFORM tsk_qm_allowed_ip_type_set
              USING     i_plnty
              CHANGING  l_qm_ip_type_allowed.
      CALL FUNCTION 'QAFD_IP_SLWBEZ_CHECK'
           EXPORTING
                i_slwbez         = i_tsk_slwbez
                i_steuerkz       = l_qm_ip_type_allowed
           EXCEPTIONS
                x_ip_not_found   = 1
                x_ip_not_allowed = 2
                OTHERS           = 3.
      IF sy-subrc NE 0.
      wrong type of inspection point
      E289: Insp. point &1 &2 is not allowed for task list type
        MESSAGE e289(qp) WITH i_tsk_slwbez
                              i_tq79-ppkttyp
                              i_plnty
                         INTO g_msg_dummy.
        CALL FUNCTION 'CP_MC_MESSAGE_COLLECT'
             EXCEPTIONS
                  message_not_collected = 1
                  OTHERS                = 2.
        e_flg_tsk_check_aborted = cp_check-flg_yes.
      ENDIF.
    ENDFORM.                               " sk_inspection_points_check
    update us to help you more, reward points to help you better!
    Regards,
    Shyamal

  • Settings for inspection point user field

    Hai gurus,
    i want to know the settings for inspection point user field(150)
    1) Field combination = 150
    2 )Inspection type = ?
    3) Functional location- field active  = ?(predefined field)
    under user field
    1)Text length 18 - Field active = ?
    2)Text length 10 - Field active = ?
    3)Number  length 10 - Field active = ?
    4)Number length  3 - Field active = ?
    5) Date - Field active = ?
    6) Time - FIeld active = ?
    waiting for positive reply.
    regards,
    sekar chand

    dear Sekar
    1) 150 inspection point is maily used for production related inspection. 03 , 04 . it is a freely defined inspection point which means you want to carry out several inspections for each operation during the production process
    2) It is not Inspection type it is inspection point type- There are mainly 3 inspection point type
    Freely defined - explained
    Equipment related - You need this inspection point type if you want to carry out calibration inspections and record the results of test equipment inspections or inspections of functional locations
    Inspection points to identify samples-You need this inspection point type if you want to manage samples and record inspection results for physical samples
    3) Predefined field is for identification of the inspection point.
    Example for inspection point type  1
    For inspection point type 1 (inspection point for equipment) that is used, for example, in a calibration inspection, the equipment number must be entered. (To access the results recording function, however, you can use a different key word instead of 'equipment number', such as, 'test equipment').
    Example for point 3
    The sample-drawing procedure determines the number of samples to be taken. The system automatically creates an inspection point for each sample.
    4) User fields are again identification. You can add in key work text which will appear while result recording.
    5) Field Active  -This helps in sorting out the user fields.  An identification field is only active if you have made an entry in this field.Fields with numeric entries are required fields. The numbering sequence that you define for these fields uniquely identify an inspection point.
    a typical example can be User field/field active/keyword combination
    1)Text length 18 -1 -Inspector Name
    2)Text length 10 - 2- Location
    3)Number length 10 - 3- Shift No
    4)Number length 3 - 4- Section No
    5) Date - 5- Date
    6) Time - 6-  Time
    please Date and Time populates automaticaly. it is not mandatory that you use all the fields
    Hope this helps
    Regards
    gajesh

  • How can I monitor my monthly data usage for all 3 computers in my house? I have an Airport base station and it seems there should be software to monitor it from that point rather than monitoring the usage for each computer and then adding it up.

    How can I monitor my monthly data usage for all 3 computers in my house? I have an Airport base station and it seems there should be software to monitor it from that point rather than monitoring the usage for each computer and then adding it up.

    The following example was one of dozens that showed up on a simple Google search of.....
    monitor Internet data use on a Mac
    Watch your Internet usage with NetUse Monitor | Macworld
    Most service providers have an application for their users as well.

  • Usage of Sampling Procedure with Inspection Points

    Hi Experts,
    Does any one have an idea whether we can use sampling procedure with free inspection points apart from In-Process Quality Inspection (Inspection Type 03)?
    Thanks in Advance,
    Arun
    Edited by: Arun Mann on Dec 11, 2008 11:11 AM

    hi
    check the links canhelp you
    http://help.sap.com/saphelp_47x200/helpdata/en/b5/c4db38a91b11d1bd610000e829fdb3/frameset.htm
    http://help.sap.com/saphelp_47x200/helpdata/en/2d/350c26448c11d189420000e829fbbd/frameset.htm
    -ashok

  • What is the meaning fo mount point, usage of mount point in storage

    HI,
    can any one describe the meaning fo mount point, what could be the usage of the mount point, how to use the same,
    please let us know....
    thanks,
    bhavani

    can any one describe the meaning fo mount pointFrom Wikipedia:
    In Unix-like systems, the mount point is the location in the operating system's directory structure where a mounted file system appears. For example, many modern Linux distributions automatically mount the CD drive as /media/cdrom, so the contents of the CD drive will appear in the /media/cdrom directory.
    what could be the usage of the mount point, how to use the same,I believe above lines answer this question to some extent. Please be elaborate if you need details.

  • QM about the Inspection Points

    Hello everyone, I have create the inspection points in the process of the material incoming inspection. BUT, now our Data Entry input worry information in the inspection points. SO, how can i delete this point ?
    I looking forward to your answer, thank you very much~~!

    once create point you cont  do any thing  remove inspection point  in routing or receipe then create  production order or process order  then you wont get the  inspection point in results recording

  • Goods receipt with inspection points

    hi
    my business process study reveels the following scenario
    i need to do goods receipt inspection with inspection points
    means the finish product say rice
    i given paddy to the miller as a subcontarcting
    iam getting rice as out put
    i need to record inspction results on inprocess as well as at  finish product
    ie while processing from paddy to rice i will made timely inspection points and want to capture the result
    and for final rice also i need to do inspection
    how to achive this
    if i chhose inspection type 04 and freeinspection points
    system not accepting
    plz suggest
    sasikanth

    For my proposal you use 04 inspection lot with early creation of the inspection lot.
    Create an inspection plan with the proper usage for inspection type 04.
    Select free inspection points in the header of the inspection plan.
    Assign your characteristics.  Release the plan.
    Create and release your order.  You should find an 04 inspection lot for it. 
    Select the lot, most work list will give a pop-up showing the two operations.  Double click on the first one.  Then you should get a pop-up asking for the inspection point identification.  Enter in what ever you've set it up to require.
    Record the results.  Repeat previous step as often as you need to.
    Craig

  • Batch creation at inspection point valuation.

    While doing sampling inspection thru in process inspn lot. I want to valuate inspection points and also need to use short text field for capturing qty information. During sampliong inspection some times a particular qty may get Rejected and it will be kept as blocked qty.
    Whats is the best way to capture that Rejected qty. Here we planned to generate Batch number at the GR time. Batch number is auto generated and can I create batch number at Partial lot screen of inspection point valuation.
    Is there any way to skip batcha ssignment during inspection point valuation.

    Hi,
    When the Material is subjected to Quality management & batch management is active for that material.
    Then during Goods receipt you can use automatic batch for that material so the material will be in Quality inspection with batch update
    when you do the GR in 101
    Whenever you do the usage decision then the same batch will flow.
    rgds
    Chidanand

  • Error while doing the Usage Decision in transaction QA32

    Hello Friends,
    While doing the goods receipt for customer returns from customer, system generated a inspection lot with inspection type 06.
    So in QA32 transaction, system is showing that inspection lot, but in same screen, against the column InspPlan: Material, system is not showing any entry.
    Later on after analysis, i found that no inspection plan was assinged to the material, Plant for which that inspection lot was created. When i checked that inpection lot in transaction QA03, in Insp. Specifications tab, agaisnt the Assigned Specification section, system was not showing any entry in fields Group, Group Counter, Plant, Usage.
    And against that inspection lot,status CRTD, PREQ, CHCR are active.
    Because of  which, when user is trying to do the UD against this lot system throwing the error message as Status check error.
    When i checked again i found that status CRTD is throwing the error message.
    Hence friend, i want to do the Usage decision  for that inspection lot than how to do?
    Now user has assigned the material, plant to the inspection plan in QP02.
    Should i go to QA02 transaction, and in Insp. Specification tab, for fields group, group counter, usage, Plant, maintain the values?
    Will this allow me to do the usage decision against the inspection lot which got generated when no inspection plan was assingned to that material, plant?
    Waiting for your valuable inputs.

    For Result Recording and Ud the inspection lot status must be REL as u told ur status is CRTD it Mean Some master
    is missing in inspection lot,generally inspection plan for that u run QA02 enter inspection lot no go to specification tab
    there a button assigned specification there click on that as u click on button u will find that plan for above material copied to lot and it will show u plan detail line group and group counter no.
    then go to next screen Sample if sample management is active and click on sample then system will calculate sample size then save ur lot. it would get Status As REL now ui can enter result or take UD
    for QM setting Refer
    http://sap-questions.blogspot.com/

  • Well here we go again with the Usage

    I've had problems in the past with the meter saying my son and I were using 90gb a month. I finally got the matter resolved with the help of Sean via here and the overpayments were refunded and things settled back down again. That was last year.
    I've had odd spikes from time to time but its been fine, in fact we have (according to the meter) been using on average about 25gb a month (I'm on a 40gb usage limit). So I stopped checking religiously every day - after all, it was back to where it should be given we dont stream movies, watch iplayer, all the things we are told just simply EAT the usage.
    Then last month I received an email to say we had gone over 28GB!! The remainder of the month I was checking daily, we scrapped in with less than 2GB left by 31/10.
    So now I am back to checking the figures every morning and guess what... I don't believe them again.
    0.66        1/11/14
    1.57        2/11/14
    5.24        3/11/14
    I've used over 5GB in 3 days? And more to the point I used 3.67gb yesterday??I am so not a happy bunny today.

    Hi adam_ant16
    I am sorry you are having trouble with your broadband, would you be willing to give the Mod team a chance to fix this first?  I'll be happy to get involved and make sure we get everything sorted out for you.
    Could you drop me in an email please? Use the 'contact us' form in my forum profile under the 'about me' section. You can find it by clicking on my username.
    Thx
    Craig 
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)”
    td-p/30">Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Maybe you are looking for