Discussions about third party tools

Do we have any forum where queries related to third party tools for SAP like SecurInfo can be put up ??

Hi,
What about the Software Integration and Certification forum?
Eddy

Similar Messages

Third party tool for SharePoint 2013 Record Auditing?

Does anyone have knowledge about third party tools that extend the standard auditing functionality in SharePoint 2013?
I am mostly focusing on being able to archive the audit log automatically before it is trimmed, and being able to query that archive.
Regards.
Atli

Metalogix ControlPoint is great for this! It will automatically archive and trim the audit log for you based on your parameters. It can then search across both the archive and active audit logs.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

SSL: Portal and Third-Party-Tool

Hello everybody,
I need an advice how to solve the following problem: We integrated a Third-Party-WebTool with the Application Integrator. If we lauch the portal and the special iView with HTTP everything works fine but with HTTPS we get an error message: "Session Management will not work! Please check DSM log files for details. You can turn off this alert inside 'Support Desk' -> 'SAP Application'"
Do I need those logs? Because if I understood the message correctly this deals only with SAP Applications. What about Third-Party-Tools with own SSL certificates? How solve the problem described above? Do I need to import the certificate of my Third-Party-Tool into my portal keystorage? Do I need to configure anything else?
Thanks in advance...
Regards
Steffen

I would be very appreciated if anybody could give me an advice...
Steffen

Third Party Tools To Upgrade WSS 3.0 to SharePoint Foundation 2013?

Since you cannot upgrade WSS 3.0 directly to SharePoint Foundation 2013 using just the SharePoint software, I wanted to look at 3rd party tools that automate the migration directly to 2013 without requiring an intermediate upgrade to 2010.
We have a simple WSS 3.0 farm with 2 SharePoint Servers and 2 SQL servers that are are load balanced so that the site stays up if any one of the servers goes down. It may be just round robin load balancing.
I'd like to see if I can determine if any of these migration tools would save enough time and effort for this type of environment to be worth the cost. It would be nice if we could do the upgrade all in once day instead of having 2 outages.

HI,There are third party tools to upgrade sharepoint but not from wss 3.0 to directly sharepoint 2013.Its not at all possible as I know.Please find the below link that clearly explains the Upgrade process.
http://expertsharepoint.blogspot.de/2014/03/sharepoint-up-gradationmoss2007.html
Anil Avula[MCP,MCSE,MCSA,MCTS,MCITP,MCSM] See Me At: http://expertsharepoint.blogspot.de/
It looks like there are such products.
This one says it can be used to migrate directly from even WSS 2.0 to SharePoint 2013.
http://www.fpweb.net/sharepoint-2013/migrate-sharepoint-2003-to-sharepoint-2013/
I don't like that it doesn't indicate anything about pricing on the page so you have to call a sales rep and give away all your contact information before you can get a quote. I probably will not call them.
We would "like" to speed up the migration process and have only a single outage, but since the SharePoint environment is small, we will not be spending thousands of dollars just to save having to do two upgrades. We would probably end up just
going to 2010 and canceling the 2013 upgrade if needed.

Open hub Destinations - Third-Party Tools As Destinations

Dear all, below is the SAP Help process flow steps. I am quiet clear of all the steps except the APIs. Where do we define these APIs? When it says "You use API RSB_API_OHS_DEST_SETPARAMS to define the parameters for the third-party tool that are required for the extraction" where do I use it? Is it in the 3rd party tool? or is it in SAP BI.
If it is in 3rd party tool, where in 3rd party tool. Do I need to write as code ? or would I have an option in the 3rd party tool?
If someone can help me with Microsoft connector using Microsoft SQL Server 2008 Integration Services packages to SAP BI that would be helpful.
Where in Microsoft SQL Server 2008 Integration Services packages can I use/put this APIs? Any help Plzz
If it is in SAP BI where in SAP BI do I have to use these APIs? Any help is highly appreciated
Regards,
KK
Process Flow:
Extraction to the third-party tool can be executed as follows:
       1.      You define an open hub destination with Third-Party Tool as the destination type.
       2.      You create an RFC destination for your third-party tool and enter it in the definition of the open hub destination.
       3.      You use API RSB_API_OHS_DEST_SETPARAMS to define the parameters for the third-party tool that are required for the extraction.
       4.      You either start extraction immediately or include it in a process chain. You can also start this process chain from the third-party tool using process chain API RSPC_API_CHAIN_START. The extraction process then writes the data to a database table in the BI system.
       5.      When the extraction process is finished, the system sends a notification to the third-party tool using API RSB_API_OHS_3RDPARTY_NOTIFY.
       6.      The extracted data is read by API RSB_API_OHS_DEST_READ_DATA.
       7.      The status of the extraction is transferred to the monitor by API RSB_API_OHS_REQUEST_SETSTATUS.

It's been a along time since i worked with open hub, but here goes:
The Third Party tool needs parameters or switches to work correctly. Think of the old DOS commanda the "/a" "/b" suffix.
The APIs are simply a way to pass these parameters from the BW source to the Third Party target.
If your tool does not need them, don't worry about them.
John Hawk

Does Resetting Internet Explorer Maintenance settings from GPO will also remove the proxy set in IE by a third party tool when the GPO refreshes for the first time

Hi,
We have two GPO's with IE maintenance (Preference Mode Configured)
The settings it has are
1. Automatically detect configuration settings - Set to Enabled.
2. Automatic Browser configuration - Not configured.
We do not have proxy value set in IE through this GPO.
We have proxy set in IE through a third party tool (TPT) which updates the proxy at logon event 5 and 10.
Does Resetting Internet Explorer Maintenance settings from these GPO's also clear proxy set in IE by third party tool after the first GPO refresh.
I am sure the second time when the GP refreshes, the client won't find any IEM settings and hence there is no question of the proxy set in IE by TPT to erase. It is only the first time of the GPO refresh that I am concerned about.
Can someone please guide as I am planning to do the same in our production and concerned about the downtime caused due to the proxy being removed if at all for the first time.

It will disable the proxy server option in Internet Options (untick the box), but will still store your proxy details.
Thanks
Ryan

Integrate third-party-tool with service desk (SOAMANAGER)

Hello,
to activate the web service for interface between service desk and third-party-tool I have to use transaction SOAMANAGER. My problem is that I can't find any documentation about this transaction belonging to the mentioned interface.
Has anybody experience how to activate and test the web service with SOAMANAGER?
Best regards
Klaus

Hi Santosh Asuthkar,
thank you for your answer.
I've already read the steps in trx. spro and several documentations in sdn.
There was a hint to trx. ictconf, wsconfig, lpconfig, wsadmin. If you call these transactions there
is a message that these trx. are old and trx. SOAMANAGER should be used.
Question is how to activate the webservice "ICT_SERVICE_DESK_API" in SOAMANAGER.
I've never handled with bindings and proxy classes.
Best regards
Klaus

Using third party tool to initiate a Forte batchprogram

Hello Forte Users,
Our company has acquired a software product called Maestro. It's a
production scheduling facility that manages tasks for batch mode execution.
We would like to know if anyone out there has had any experience using this
product with Forte. One recommendation that we discussed was to have
Maestro start a script on Escript to communicate to an agent that would
start the batch process at a specified time. Has anyone done something
similar or can offer any suggestions ?
Thanks in advance,
Jean Mercier
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Jean,
We use Maestro for all our scheduling scripts. To start\stop the
environment and start\stop applications. We create a shell script that uses
escript to start/stop applications. Maestro just calls the shell scripts
and monitor it for completion. I think you have to write the shell script
in a standard way to return an error if it does not finish properly. Here
is an example:
#!/bin/csh
source /appls/forte/fortedef.csh
$FORTE_ROOT/install/bin/start_nodemgr -fm "(x:300000)" -e TR2ProdEnv
ps -fu forte | grep -v grep|grep nodemgr>/appls/forte/production/scripts/KBB
set KBB=/appls/forte/production/scripts/KBB
if (-z $KBB) then
exit 1
else
exit 0
endif
Hope this helps.
ka
Kamran Amin
Forte Technical Leader, Core Systems
(203)-459-7362 or 8-204-7362 - Trumbull
[email protected]
From: Jean Mercier[SMTP:[email protected]]
Sent: Monday, April 12, 1999 10:36 AM
To: Forte-Users (E-mail)
Subject: Using third party tool to initiate a Forte batch program
Hello Forte Users,
Our company has acquired a software product called Maestro. It's a
production scheduling facility that manages tasks for batch mode
execution.
We would like to know if anyone out there has had any experience using
this
product with Forte. One recommendation that we discussed was to have
Maestro start a script on Escript to communicate to an agent that would
start the batch process at a specified time. Has anyone done something
similar or can offer any suggestions ?
Thanks in advance,
Jean Mercier
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Third-party tools for solution manager

Hi all,
Im new for solution manager a i just want to know whats SM tools and whats the third-party tools integrate and interface with SAP Solution Manager and if will be more third party tools?? ( Whats the add on tools SM have??)
regards
Tim

Hi Murali Narayanan
If you wan to achieve monitoring from technical perspective, the way that was introduced by shivjansi might be the option.
If you want to check the entry of specific table in stand alone MSSQL to ensure the business process that use MSSQL
stand alone DB, you can use BPMon remote DB monitoring that enables monitoring of non ABAP/ non SAP that supported
by netweaver like MSSQL, Oracle, DB2.
By using this function, you can monitor the entry of your stand alone SQL server.
For example, stand alone SQL Server has some table that contains some error,
or there is application table and in one row that it indicates error or completeness.
Now if you want to check these error document or incomplete document in the DB,
you can use BPMon remote DB monitor.
By monitoring this, you can ensure whether there is issue in your business or not.
You can find out how to setup from following link.
http://service.sap.com/bpm
->technical detail ->Setup Guide for non-ABAP/non-SAP
P14 (The monitoring object u201CGeneric Table Entry Counter for remote DBu201D (NATABCNX) )
is related description.
(In the document, it also introduce some other way using web service).
Also in same link, you can find out other document like how to setup BPMon.
Also there is some blog about table entry counter. it is for SAP ABAP system.
But the function is more or less same for remote DB.
So you can also check following blog to have more understandable image.
/people/volker.vongloeden/blog/2010/07/16/create-your-own-customer-specific-key-figure-for-business-process-monitoring-within-5-minutes
Best Regards
Keiji

Integrating datamining third party tools into APD

Hello everyone,
I'm looking for any documentation about the integration of third party tools of datamining into the Analisys Process Designer (APD) of SAP Business Intelligence.
If you have experience, documents or links about this topic please let me know.
Also i'm looking for a list of certified third party tools vendors for APD.
I would appreciate your answers.
Thanks!

Hi,
Check in SAP help portal..
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/96939c07-0901-0010-bf94-ac8b347dd541
http://help.sap.com/saphelp_nw04/helpdata/en/49/7e960481916448b20134d471d36a6b/frameset.htm
http://www.bi-expertonline.com/archive/Volume_02_(2004)/Issue_05_(May)/V2I5A3.cfm?session=
Thanks
Reddy

Third party tool interface integration with SAP

Hi guys - here's an interesting one:
I want to integrate a third party tool with SAP. The interfaces would be required to communicate both ways - sending data out and receiving data and populating relevant tables / transactions. I, so far see a number of methods available to me that would be suitable and feasible:
<b> - File based exchange of data
- iDocs (custom or standard)
- BAPIs (custom or standard)</b>
- XI (but this method would not be feasible and would thus not consider it)
In all the cases above (apart from XI), I guess I would require a program that would call the BAPIs or distribute iDoc data or extract and populate file based data. I have so far compiled a list of various advantages and disadvantages and just wanted to probe your expert minds.
<b>Please list the advantages and disadvantages of each method, providing a reasonable discussion as to why you think this is the case. If you think any other method would be suitable, please list this too.</b>
The person with the most accurate and detailed answer will receive all the points.
Thanks
Mantas

Hi Mantas,
The Pros and Cons in this case depends on the third party tool which you want to intergrate with SAP.
File Based Exchange of data: How conveniently can you push the data from the third party tool into a file.
IDocs: The third party tool should understand the syntax and symantics of the IDoc.
BAPIs: How do you plan to call the BAPI from the third party tool.
From just the SAP point of view.
Here are the advantages and disadvantages:
1. File Based Exchange of data:This method is good if you can easily pass a file which can be uploaded into sap and the data can be stored in the sap tables.
2.IDocs:
Advantages:
If you have an existing IDoc that can do the data transfer then this would be the simplest method as only the settings are needed.No program is required to call this IDoc the settings automatically take care of this.
Disadvantages:
If a custom IDoc needs to be developed then creation of a BAPI would be a better option.
3.BAPIs:
Advantages:
It is simpler to develop a BAPI than a custom IDoc which involves creation of segments, function modules etc.
Disadvantages:
There should be an active online connection.
Some programming will be needed to call the BAPI.

Integrating third party tools in SAP

Hi friends,
     Can anybody guide me about how to integrate third party tools in SAP gui or any other systems in SAP?
    What are all the connectors available in SAP ? and which connector will integrate third party tools.
   Please help me out.
Thanks in advance.
Regards
Sireesha

I am not sure of any standard integration programs specific to recruitment, but through customization we can integrate third party rectt systems like People click, HRP etc.
Develop inbound programs with ALE-IDOC system to transfer the data to Rectt tables.
The switch will control activation of integration between the systems.
If this helps, pl do reward.
Thanks
Narasimha

Currency Conversion using third party tool

Hi,
I am trying to access BW from a third party tool and so far been quite successfull accessing BW Infocubes and Bex Queries by using OLAP BAPIs. However my customer wants to use currency conversion as it is available in BEX in the third party tool as well. I need some thoughts in this direction from experts who have worked on Business Objects and BW integration.
I believe Business Objects has a similar interface with BW using OLAP BAPIs. Is there a currency conversion functionality available in Business Objects for BW? Would really appreciate if somebody, who has tried out this feature, can share some of his/her experience.
Thanks,
Anurag.

Jean,
We use Maestro for all our scheduling scripts. To start\stop the
environment and start\stop applications. We create a shell script that uses
escript to start/stop applications. Maestro just calls the shell scripts
and monitor it for completion. I think you have to write the shell script
in a standard way to return an error if it does not finish properly. Here
is an example:
#!/bin/csh
source /appls/forte/fortedef.csh
$FORTE_ROOT/install/bin/start_nodemgr -fm "(x:300000)" -e TR2ProdEnv
ps -fu forte | grep -v grep|grep nodemgr>/appls/forte/production/scripts/KBB
set KBB=/appls/forte/production/scripts/KBB
if (-z $KBB) then
exit 1
else
exit 0
endif
Hope this helps.
ka
Kamran Amin
Forte Technical Leader, Core Systems
(203)-459-7362 or 8-204-7362 - Trumbull
[email protected]
From: Jean Mercier[SMTP:[email protected]]
Sent: Monday, April 12, 1999 10:36 AM
To: Forte-Users (E-mail)
Subject: Using third party tool to initiate a Forte batch program
Hello Forte Users,
Our company has acquired a software product called Maestro. It's a
production scheduling facility that manages tasks for batch mode
execution.
We would like to know if anyone out there has had any experience using
this
product with Forte. One recommendation that we discussed was to have
Maestro start a script on Escript to communicate to an agent that would
start the batch process at a specified time. Has anyone done something
similar or can offer any suggestions ?
Thanks in advance,
Jean Mercier
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

I need help with some technical YouTube Settings, third party tools page

How can I add ios mobile Safari, back to my google + third-party tools page? I updated my ipad 2 to ios7 and could no longer upload videos to youtube for my blog. YouTube had been saying unrecognized file type because it's not longer compatible with ios mobile photos app.
I went into settings via the google/youtube help files and removed some old stuff from the third party apps, like blogger-an inactive blog and obviously deleted the ios moblie too that was right underneath blogger. tried jumping through their hoops, add a phone number, verify your account, lengthen your video time, add 2 step verification (which was horrible and I went back in and removed it), add a password for ipad, etc.
They (youtube/google??) have been working on stuff because there is all kinds of new things the second day I tried to figure this out via their help/redirect links. ios mobile was there before and now it's gone, even though I did not choose/select it. But I have noticed that the ipad screen is much more sensitive than it was before the ios7 update. I don't even have to touch the screen for some things, it accepts and goes on it's own while my finger is hovering over the screen.
ipad2
ios7.0.2
Safari
YouTube
Google+

The Title of my post, should really be....I have ipad2 with ios7.0.3 and Safari, I can't upload videos to YouTube because of Google? or ios7?
It's now November 1st. LOL 53 folks have read my problem and it only gets better. I pleaded with Google/YouTube via Feedback form (because they are one and the same now) to please add ios mobile back to Google 3rd party apps and after checking every single day, someone finally added it back for me. Yay! Then I asked if I needed to "revoke" Google+ in the 3rd party apps because some of the help files suggested Google+ is attached to your YouTube channel and might affect uploading of videos? For the life of me, I could not figure out how to get it off my YouTube channel. And the help files didn't take me to a place to change it. Upon checking 3rd party apps, I could no longer find the page they were on, and the Google+ app icon now goes no where.
Hey, but there are new menus with all kinds of statistics now about your account, like how many subscribers you have, what the average number of minutes people watch your videos,etc. Hmm... so I tried uploading a video and it worked. I got the message that ios7.0.3 with bug fixes was available a few days ago and updated to that. I'm back to, no longer upload videos, yesterday it was still freezing on the upload screen, where you add the title of your video and all of the specs, it appears to be half uploaded with a solid blue bar half way and goes no where. I have to close the app after an hour or more. I have rebooted a couple of times every day. Today it says, we could not upload your video, we did not recognize the format of this file. And when I go to YouTube and can see all of my videos, my subscriptions, I can not remove the videos that tried to upload, they are blank gray squares. A few days ago I could edit them out. I guess they are still working on it. These are the same self recorded videos, that I have been uploading for a year, same ipad. I have sent feedback to Google/YouTube once again.
I'm completely at their mercy. I have yahoo mail, so I can't send my videos via email, even though my channel has a special email address to send videos to for upload. Yahoo will not send a video more than a minute or so. I created an AT&T email address today, and it's the same there, will not send a 15 minute video. The upload link on YouTube no longer works, there on the same page with your special email address to mail your videos in, even though there is no email that supports a 15 minute video. My husband suggested video compressing program. I have not tried to upload from a PC, I do have icloud, so that may be my next route. Other forums say they/Google/YouTube are fully aware of it and are working on it. Still 30+ days in...
It's a shame these companies can't work together, it's a shame that there is no answer, because we all have these devices we spent hundreds of dollars on and want them to work. I have been searching the web for 30+ days and no one knows the answer. Hard to believe I'm the only person having this ipad issue.

Error while creating the proxy object to connect to a third party tool.

Hi,
I tried creating a proxy object with the wsdl file. I even created a HTTP connection to the third party tool. but when I try to execute the whole proxy object, I am getting the below error. Can anyone help me on this?
"Proxy-Generierung: Fehler aufgetreten"
"Incorrect value: Entity "<<document>>"(92 /3788 ). end tag 'ul' does not match begin tag 'p'"
Thanks & Regards,
Veerabhadra Rao A.

do a check on the wsdl file and how you are passing values in the proxy. The tags for XML are not correct. Open the WSDL in IE and see there must be an error. Or probably when passing the actual values to the XML generated each element is not closed properly. Error says tags dont match.
Edited by: Kshamatha Eda on Mar 5, 2010 10:54 AM

Discussions about third party tools

Similar Messages

Maybe you are looking for