[Diseño_grafico] Precio Valla publicitaria
Hola, aver si alguien me orienta:
Alguien sabe en cuanto está actualmente el precio de
diseño de una valla
publicitaria? Precio aprox. Ya sé que depende de las
horas tipo producto,
etc. Pero entre cuanto y cuanto?
Gracias
Similar Messages
-
Precios para cotizar (CHILE)...
Hola estimados, quisiera preguntarles por precios
referenciales de diseños
de flyer, diptico y tripticos.
Por favor necesito urgente estos valores para cotizar.
Saludos y gracias, PEGMe surje otra duda:
Será posible hacer una relación entre artículo y cliente? de manera que se despleguen las listas de precios disponibles para el artículo cuando el cliente pertenece a un grupo.
Intente hacelo con el código abajo descrito, sin embargo, el resultado es que solo me desplega la lista de precios que el cliente tiene por default en la ficha condiciones de pago.
Habrá alguna forma de hacerlo?
de nuevo gracias
select
T0.Price,
T1.ListName,
T0.ItemCode
From ITM1 T0
INNER JOIN OPLN T1 ON T0.PriceList = T1.ListNum
LeFT JOIN OCRD T2 ON T1.ListNum = T2.ListNum
where
T0.ItemCode = $[$38.1.1]
and T0.PriceList In (2,3,4,5)
and T2.GroupCode = '2' -- en esta parte también lo hice con Or y nada -
Diseñador Freelance Teletrabajo
Hola a todos,
Estamos buscando una persona para Diseño de Interfaces
Gráficas de
Usuario en Adobe Flash para proyecto de 300 horas de
duración con
posibilidad de contratación tras la ejecución. El
desarrollo se llevará a
cabo bajo la modalidad de teletrabajo con reuniones
periódicas de
seguimiento (Pozuelo de Alarcón, Madrid).
Requerido:
- Persona seria y responsable.
- Presentación previa de portfolio o trabajos
anteriores.
- Freelance regularizado en Seguridad Social.
- Capacidad de trabajo por objetivos.
- Persona muy creativa.
Interesados enviad currículum vitae actualizado y
muestra de trabajos
anteriores a: [email protected]
Si queda alguna duda, preguntad ;).
Carlos Velasco Blanco
Jefe de Producto
Fractalia Hotel Systems S.L.En cuanto al asunto económico, será en función
de la valía del candidato, a
precio fijo por hora. En ?/hora brutos.
"Carlos Velasco" <[email protected]>
escribió en el mensaje
news:fqra3u$ab2$[email protected]..
> Hola a todos,
>
> Estamos buscando una persona para Diseño de
Interfaces Gráficas de
> Usuario en Adobe Flash para proyecto de 300 horas de
duración con
> posibilidad de contratación tras la ejecución.
El desarrollo se llevará a
> cabo bajo la modalidad de teletrabajo con reuniones
periódicas de
> seguimiento (Pozuelo de Alarcón, Madrid).
>
> Requerido:
>
> - Persona seria y responsable.
> - Presentación previa de portfolio o trabajos
anteriores.
> - Freelance regularizado en Seguridad Social.
> - Capacidad de trabajo por objetivos.
> - Persona muy creativa.
>
>
> Interesados enviad currículum vitae actualizado y
muestra de trabajos
> anteriores a: [email protected]
>
> Si queda alguna duda, preguntad ;).
>
>
> Carlos Velasco Blanco
> Jefe de Producto
> Fractalia Hotel Systems S.L.
> -
How To "Dis-Embed" An Image From A .Doc File?
Here's what I've got. I'm working on a flier to be commercially printed; it contains four photos and text. I've spent a lot of time with each photo, massaging each in PE to maximize its quality when it's eventually printed, and saved each as a TIFF file. (I "tested" each photo's printability by seeing what I get when I run it through my own Canon printer.)
What I did next was to take each of the PE processed photos, moved them into a MS Word text document, and saved the final flier results as a .doc file.
Now, my commercial print shop tells me that better results might be obtained by me giving them the original photos instead of using the completed .doc flier. This is where my problem arises: it's not that I saved too few, I saved too many versions of the photos as works in progress. It's not an easy job to find the exact photo version I, finally, embedded. Using the "direct" approach doesn't seem to work. When I drag a photo out of its .doc file onto my desktop and try to open this clipping (PICT) with PE I get the message, "Could not complete your request because an unexpected end-of-file was encountered."
So, how do I "dis-embed" each of these photos from the original document and without losing all the nice stuff I did when first processing them? Any comments and suggestions will be appreciated.
DaveHi,
You can use javax.swing.ImageIcon like so
ImageIcon anIcon=new ImageIcon("image.jpg");Hope thats what you are after,
Cheers
Jack573 -
how to fix this error message The backup disk image “/Volumes/AirPort Disk/FARES DEL VALLE’s iMac.sparsebundle” could not be accessed (error -1).
The troubleshooting C17 is the specific article.
http://pondini.org/TM/Troubleshooting.html
This is generally a Lion error.. and you will need 5.6 utility to get access to the disk area.
So download the real utility. Run it instead of v6 toy version.
http://support.apple.com/kb/DL1482
Go to the manual setup, disk page and click on disconnect all users.. that will unmount all users connected to the disk and allow it to start working. But there are a number of other issues that are possible cause. Pondini lists some of them. -
Please restore e-mail or at least give us some real information. Tech support is almost smug in their response for additional information. The iCloud status page has said the same thing since yesterday. A real dis-service. My business depends on this! Any one have any suggestions not being offerd by tech support or Apple? Anything at all?
mdjb wrote:
I just lost a big opportunity to get a new client because of this!! almost 24 hours now without any email service. I was one of the original.mac customers. I am over this time to move on. It is an inferior product.
My sympathy, but, this is what you agreed to when you chose to use a free system: (From terms of service agreement, iCloud)
APPLE DOES NOT GUARANTEE, REPRESENT, OR WARRANT THAT YOUR USE OF THE SERVICE WILL BE UNINTERRUPTED OR ERROR-FREE, AND YOU AGREE THAT FROM TIME TO TIME APPLE MAY REMOVE THE SERVICE FOR INDEFINITE PERIODS OF TIME, OR CANCEL THE SERVICE IN ACCORDANCE WITH THE TERMS OF THIS AGREEMENT.
And this is no different from any other free service I'm afraid. Pay for your mail, then you have the right to expect service. -
Internal application error in scheduling a dis file.
Hi friends , i am finding a problem in scheduling a dis file . discoverer says internal application error. some other files are getting scheduled. the query for this particaular report is long. any suggestions , its urgent.................. discoverer version is 4.1 .
Hi,
Not really enough informatoin to debug via a forum, you may need a Service Request with Oracle Support. If staying on 4.1 (recommend 10.1.2.0.2), I suggest you are patched to 4.1.48.08
Additionally, ensure the worksheet runs to completion without scheduling... since you mentioned it is long you may need to increase the data cache, etc.
Regards,
Steve -
How to populate the field Discount Percent (DIS) in the outbound S1ORDEXC?
Hello all,
I am working with the Spec2000 to send out the IDOC S1ORDEXC.
Does anyone know how to populate the field Discount Percent (DIS)?
This field length of Discount Percent is 2 characters, but our customer discount in the Princing Conditions (Sales Order) is longer than 2 characters (ex: 7.500-%)
Thank youHello Thuan
I guess you are working with IS- ADEC and SPEC 2000. I am not an expert on this but leave you some hints from OSS notes I came across.
It appears like Discount Percent - DIS and Procurement Discount Percent -PDP are complementary and mutually exclusive. If one exists, the other need not.
Looks like DIS is computed as (100-PDP)/100 and it is just a 2- integer data (as in 20 Percent). It is a kind of multiplier (Factor), example if PDP discount is 10 percent, then DIS (Factor) is 0.9 and so final (net) price after discount = Price*0.9.
" If the discount comes in the S1BOOKED inbound into SD in the field DIS, then the discount has to be sent back in the DIS field .. if it came in the PDP field then it has to be sent back in the PDP field. If there was no discount in the incoming IDoc, then the discount has to be filled in the PDP if there was a change in the discount".
KDATE in SPEC 2000 file maps to DIS and KPERC to PDP.
PDP has 4 characters and per OSS note 440380, the point is ignored meaning you can work with 1225 instead of 12.25.
So may be you can work with PDP?
OSS notes: Apply to older releases but may still be applicable conceptually speaking.
456153 - S1ORDEXC does not send out Discount
440380 - PDP has only 4 characters in the SPEC IDoc instead of 5
596042 - Discount percent DIS not considered e processing S1ORDEXC
698668 - Incorrect calculation of unit price for PO item by S1ORDEXC
Let me know you final findings. -
How to dis/enable carplay in iOS 8.1?
Hi community,
has anyone an idea how to dis/enable the carplay Feature in iOS 8.1.
I remember I have seen such a option in earlier versions but I'm not able to find it now.
TxThanks pogster,
That was the setting I was looking for.
This is also available while not connected to Car Play enabled device in the vehicle. -
'schInternalColumn' is null or not an object - Error in DIS
Hi all..
When I am going to paste any document in DIS, " 'schInternalColumn' is null or not an object " this error comes with check in page...
What is the issue behind this...Please help me..
Regards
YogitaHi Yogita ,
This issue has got introduced from 0717 patchset that is provided for UCM server , it is already fixed and a patch will be released for the same soon .
You can select OK (I think it shows up around 7 times) and continue with the operations on DIS . It does not break any functionality .
Thanks
Srinath
Edited by: Srinath Menon on Sep 5, 2012 12:54 PM -
im having trouble with my ipad mini in regards with the icloud back up notification; if i press "ok" it doesnt dis appear, i couldn open my ipad/turn off because of this notification; whats the best way to get rid of this? please help
Have you tried a soft-reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
-
I'm pretty new at installing exchange myself and have never done Exchange 2013
While going through the install help online I came across disjointed domains. I think I'm over thinking this but here is what I have and what I want to do. Any other tips would be great as well.
Customer currently has a domain, internal dns and email through GoDaddy. Lets call it smallschool.com
Internally they have a new Active Directory (2012) and the domain is in.smallschool.com. There is no external DNS except GoDaddy. I plan to use that (if that's ok).
I have built a Hyper-V for Exchange 2013 and have installed pre-requisites.
My Current Question are...
Do I need to set up dis-joint dns suffix and modify the msds-allowdnssuffix attribute? I have the instructions, I just don't know if this is a must or not with the domain names like they are.
Am I going to run into any trouble switching GoDaddy's email to Exchange Server? Any Tips?
Thank You,
fixitrodHi fixitrod,
Agree with Ed Crowley. If your original used domain is smallschool.com in GoDaddy, I suppose your email address would be
[email protected]
If that is the case, when you deployed a new AD domain with in.smallschool.com, we can create an accepted domain for smallschool.com in Exchange 2013. If you want to still use Godaddy for external message sending and receiving, you can create an external
relay domain. For more information about configuring external relay fomain, please refer to:
http://technet.microsoft.com/en-us/library/jj657491(v=exchg.150).aspx
Regards,
Winnie Liang
TechNet Community Support -
Work items are not dis appearing in my inbox for parked FI invoices.
Hi,
work items are not dis appearing in my inbox for parked FI invoices.
We are using asynchronus method, and terminating event for this method.
Could you please suggest, what will be the reason for this.
Thanks & Regards
MadhuHi Karri,
Thank you for your response.
But the event is triggering, No error message is getting.
Any other idea about the issue.
Thanks & Regards
Madhu -
How to assign default Title in DIS?
Hi all..
When we paste the document in DIS,it takes the document name as a default value for the 'Title'.
But I want to assign it a default value rather than name of the document.
How can I implement this?
Regards,
YogitaHow can I implement this?
Like with any other document - using Rules and Profiles http://docs.oracle.com/cd/E23943_01/doc.1111/e10978/c04_metadata.htm#DAFIIEEI ; in your case, a global rule could do.
Keep in mind, however, that if Folders are used (or DIS), a folder may contain only documents with distinct names ('Titles'). -
Problem Using Profiles with DIS
I am using DIS with profiles in 11g and I am in the process of cutting and pasting a few documents into a folder in UCM. Here is what happens:
1) Select a number of documents in Windows Explorer
2) Right click and select copy
3) Right click on a folder in Content Server
4) Select paste
5) In the Check In Content form the profile defaults to the profile assigned to the folder (although others can be chosen) and displays correctly
6) Input metadata
7) Click Next to move to the next document
8) Input metadata
9) Click Previous to move to the previous document
10) Although the same profile is selected the profile displayed is the standard document profile and displays all metadata fields (incorrectly)
11) Click Next to move to the next document (the second one)
12) The standard profile with all metadata fields is displayed (incorrectly)
13) Click Next to move to the next document (the third one)
14) The correct profile is displayed
I have used DIS many times before and have never seen this happen but it is consistent. Help would be appreciated.
BillIn case anyone is interested, this was discovered to be a bug in rev 11.1.1.5 of DIS and a patch was delivered.
Maybe you are looking for
-
IPad "No SIM": dirty contacts?
I keep getting the 'No SIM' error on my iPad 2. The first time this happened and I found that removing and reinserting the card didn't work at first, but did after blowing air into the slot. A little while later the same thing happened, but this time
-
Case study: "Large?" labview programs flooded with different VIT's
Case study: "Large?" labview programs flooded with different VIT's Type of application: Computer with loads of individual hardware connected or other software (either onsite (different buses) or offsite (Satelite/GSM/GPRS/radio etc.). Hardware descri
-
Cannot find original file??!!
Can anyone help with this frustration? Every so often, some of my songs have the ! and won't play or move. When I try, it says the file cannot be found. So I did a search of my whole computer, and it didn't come up. But I know it's there!!!! I know h
-
External HDD not showing up in finder through airport extreme
I have a 2011 Airport Extreme that I'm attatching an external HDD via USB that's been formatted with a Mac OS Extended (Journaled) partition. I can see my drive in the AirPort Utility under Disks > Disks, I've enabled File Sharing, but I can't see it
-
Hello, I was wondering if it is possible to create a track that has more than 6 outputs in Audition? I have tried the trial version and it doesn't look like that is possible. If not we it be implemented sometime soon? Thanks in advance P