Disguising Voice On Video Already Shot

Did a search, and nothing really. Have some video, that was shot for a joke, and don't want people to recognize the voice too easily. Before playing with EQ, and filters, thought I'd check here and see if anyone has a suggestion. As always, any help is appreciated. Thanks.

I agree this is probably the best way to go, for a more sincere mask, use about -300 frequency, it is not to drastic and still hides the voice. If you want something more commedic go -1200 or **** even go +1200 and get a chipmunk sound, you still can make out the words with great ease.

Similar Messages

Welcome to the Voice and Video over WLAN Discussion

Welcome to the Cisco Networking Professionals Connection Wireless Forum. This conversation will provide you the opportunity to discuss issues surrounding Voice and Video over WLAN. We encourage everyone to share their knowledge and start conversations on issues such as bandwidth intensive wireless applications, and any other topic concerning Voice and Video over WLAN.
Remember, just like in the workplace, be courteous to your fellow forum participants. Please refrain from using disparaging or obscene language or posting advertisements.
We encourage you to tell your fellow networking professionals about the site!
If you would like us to send them a personal invitation simply send their names and e-mail addresses along with your name to us at [email protected]

This is easily done with dial peer statements . The dial peer in your originating router must route the calls to the terminating router first. That would look like :
dial-peer voice xxxxx voip ( the xxxxx is just a tag)
destination-pattern 45... (that would route any 5-digit calls beginning with 45)
session-target ipv4:xxx.xxx.xxx.xxx (ip address of the terminating router)
If digitones are to be dialed after the connection is established, use the statement:
dtmf-relay-h.245-alphanumeric
You could also use a statement to specify the codec to be used:
codec g711ulaw
You would need multiple voip dial peers if the calls were going to different routers based on the dialed digits. If all calls are sent to the same terminating router, use all wild cards in the dest-pattern statement.
At the terminating router configure pots dial peers:
dial-peer voice xxxxx pots
dest-pattern 45...
port x/x (whichever port the call is to be terminated on)
prefix 45 (this re-inserts matched digits which are stripped off by the pots dp)
Repeat for other ports which will receive calls.
Paul

How do I dispute a copyright claim against a video i made using a trailer in iMovie? The only content I used was the video I shot of friends daughter on a merry-go-round.IMovie had the music etc that I used.

How do I dispute a copyright claim against a video i made using a trailer in iMovie? The only content I used was the video I shot of friends daughter on a merry-go-round.IMovie had the music etc that I used. Here's the message It gives a number of options to choose from if I want to dispute the claim but I don't know which one this would come under. Several obviously don't apply and of the ones left I don't know which content that is in IMovie that I use comes under. "This video is my original content and I own the rights to it" "I have a license or written permission of the property rights holder to use this material" "My use of the content meets the legal requirements for fair use of fair dealing under applicable copyright laws" or "The content is in the public domain or is not eligible for copright protection."

You want to use the "I have a license..." option, since clearly the music is not yours, but Apple has granted you a license.
For your license, see this document, section 2.M. http://images.apple.com/legal/sla/docs/iMovie.pdf
For more on this irritating problem and why it is so hard to solve, see this article. (It is a problem for Final Cut Pro users as well.)
http://www.larryjordan.biz/app_bin/wordpress/archives/1842

Ipod nano video i shot need to get off nano and on my computer to share please reply

i have nano 5th gen with video i shot video but now need to share it please help!macbook pro leopard 6.7

Hi,
This is the iPod Touch forum. The iPod Nano forum is at: https://discussions.apple.com/community/ipod/ipod_nano.
---likeabird---

Eight-Class Model QoS for voice and video

One of the QoS recomendation in the SRND "Enterprise QoS" is to create a Eight-Class QoS Model utilizing a seperate priority queue for voice and video.
It says that even though you have only one physical priority queue, that LLQ has an implicit policer that allows for time-division multiplexing of the single priority queue. This implicit policer abstract the fact that there is essentially a single LLQ within the algorithm and, thus, allows for the "provisioning" of multiple LLQs.
My question is if anyone has tried this and if there are any limitations on the platforms that can support this "dual-LLQ design."

Design guide which is basically the QoSDesign recommendation bible.
http://www.cisco.com/univercd/cc/td/doc/solution/esm/qossrnd.pdf
It has a large section for WAN recommendations...while you may not
need to follow one of these Based on my understanding what what you
have for a link (DS3) and what you are trying to accomplish, I
believe the following section would be a good place to start.
- WAN Aggregator QoS Design
- WAN Edge Classification and Provisioning Models
- High Link Speed QoS Class Model
- Eight-Class Model

How to delete videos already in iCloud 'Backup'?

My iCloud 'Backup' of camera roll is too high as it has videos. I have deleted all the videos from camera roll on my iP4. However, when I backup to iCloud again, it is not deleting the videos from cloud. Wouldnt iCloud delete automatically (when backed up next time) the videos in cloud when it is deleted from the camera roll on iP4? Or the only option is to turn off backing up of camera roll altogether to delete the videos already in cloud backup?

I got a MobileMe tech support guy help me with this. He was kind enough to help me on this iCloud issue. According to him, it might have been designed like this on purpose. In case you accidentally delete anything from your camera roll, you can use iCloud to restore the videos or photos as well. However, he agreed that this is an inelegant way and he has already flagged this issue with the iCloud team. He will be submitting a suggestion from my end to see if there can be an easier way out.

Facetime between iPad2 and MacBook Air worked fine here in the USA. The iPad2 is now in Rome, Italy and we can't connect internationally. We both can hear the caller ringing in, but after accepting the call we cannot connect. No voice, no video.

Facetime between iPad2 and MacBook Air worked fine here in the USA. The iPad2 is now in Rome, Italy and we can't connect internationally. We both can hear the caller ringing in and can see who is trying to call, but after accepting the call we cannot connect. No voice, no video. iPad is successfully sending and receiving eMails, but no Factime connection What's up?

I am curious if possibly the hotel has some sort of VOIP block on. Have you tried Skype? Did you talk to the hotel staff? My husband is traveling to Milan in a couple of days and I wonder if he will run into the same issue. He has had no problems from Istanbul but he is staying in a corporate apartment there. If you find an answer please post back. Thanks

How do I watch a video I shot with my itouch on my pc?

How do I watch a video I shot with my itouch on my pc?

After you have recorded the video, transfer it to your PC using the instructions in this Apple support document.
http://support.apple.com/kb/ht4083
From there, open the file in a media player that supports the file format such as Quicktime.
B-rock

Mac airplay to apple tv, there is only voice,no video..

mac airplay to apple tv, there is only voice,no video..

some older macs don't support airplay correctly in their video cards
you don't state which mac you have though
http://support.apple.com/kb/HT5404
if yours don't you have to use airparrot to do it

Has anyone tried installing the Google Voice and Video plugin?

Hi,
I wanted to check out the Hangouts feature at Google+, but I need the Google Voice and Video plugin for that. I tried unpacking the deb package supplied by Google and installing it manually, but the plugin does not work and Firefox just keeps crashing. Could anyone actually get it to work with Arch yet?

Sorry for not using the search, I see it's available in AUR... http://aur.archlinux.org/packages.php?ID=36308
Now trying to install from there!

How can I take a video snap shot during skype video call from my MacBook Pro?

How can I take a video snap shot during skype video call from my MacBook Pro?

OS X Lion: Shortcuts for taking pictures of the screen

Advance to slide with video already playing

A client wants to be able to advance to a slide with the video already playing, this is for a live presentation, normally done by rolling in video from tape and using switcher to cross fade from text to moving video.
Any solutions would be appreciated
Thanks
mac pro Mac OS X (10.4.8)

Welcome to the discussions, Magneticone.
If all you want is the equivalent of a crossfade, it can be accomplished quite easily.
In Keynote, video can play behind other objects, and can be set to play immediately upon slide transition. These two features allow you to emulate a cross-fade.
Set up the first slide in its final state, and take a screenshot of it at its full-size (100%). Set the transition to the next slide as "None" (the default).
On the second slide, insert your video file, and set it to play immediately after the slide transition (this is the default). Now, place the screenshot on top of the video image, align it so that it exactly matches the first slide, and give it a Dissolve build out, to run immediately (or with whatever delay you want) after the slide transition.
What will happen is that the first slide with transition to the second "invisibly", since the same image is on both. Once the second slide appears, the video behind the screenshot will start playing, and the screenshot will then fade to reveal the already-playing video. The effect will be of a slide crossfading with video.
(As is often the case with Keynote, it is helpful not to first approach presentation problems in terms of actual "slides", but instead in terms of what the effect should be. Many time you can fool the audience into seeing more or fewer "slides" than are actually used in the presentation, and this can make achieving certain effects possible, or easier.)

ISight conflict when installing Google Voice and Video driver

After installing Google Voice and Video driver, the iSight stops working on Flash based applications or websites.
Two camera drivers are installed: Google camera 0 and Google camera 1.
Even if I go to Settings and choose the correct driver (iSight Integrated), it does't works.
The only way I found to solve this issue is removing those Google's drivers (Library/Application Support/Google/GoogleVoiceAndVideoUnistaller).
However, this is not a solution since I can't use GTalk anymore.
Does Flash Player 10.2 fixes this conflict?
Regards,
Flávio Mikami

Sorry for not using the search, I see it's available in AUR... http://aur.archlinux.org/packages.php?ID=36308
Now trying to install from there!

Hi there , I have Ipad 2. just upgraded to OS 5.1 and now cant transfer any videos to it. videos already stored can be played but when i try to copy any new video, it says that the video cannot be played by Ipad.I have tried mp4, mov, m4v but nothing play

hi there , I have Ipad 2. just upgraded to OS 5.1 and now cant transfer any videos to it. videos already stored can be played but when i try to copy any new video, it says that the video cannot be played by Ipad.I have tried mp4, mov, m4v but nothing plays.

Log in to the Developer forum. You will find instructions on how to install the lastest beta. Your problem is the beta you have installed has expired. All of them did on October 5; you will find hundreds of threads discussing this. If you have a beta it is assumed that you will continue as a beta tester, so a simple update using iTunes will not work.
If you no longer want to be a beta tester install the GM 7.0.2 by restoring from iTunes using DFU mode.

I have video i shot from my nano 5th gen i want to send to another person or put it on my computer don"t show up in itunes help!

i have video i shot with my nano i"d like to share can"t find it when i connect to itunes i need to get it off and onto my hardrive 5th gen

Click here and follow the instructions.
(57879)

Disguising Voice On Video Already Shot

Similar Messages

Maybe you are looking for