Dish Network rf remote doesn't work

After sucessfully completing the NSZ-GS7 installation, my Dish Network ir remote works ok, but the rf remote doesn't. What do I look for to troubleshoot?

Hello Casey,
Welcome to the Sony Community.
We would require additional details:
     1. Are you trying to control the NSZGS7 unit using the Dish Network Remote?
     2. What happens when you try using the RF Remote? Is there any error message or indicator?
     3. The Remote Control of the NSZGS7 uses Bluetooth technology; check with Dish Network support whether this could be a hindrance to the operation of the RF Remote.
Thank you for your post.

Similar Messages

  • Just bought a pair of earpods for the shuffle 3rd gen the first the remote doesn't work so i exchanged them and these don't work either! I already checked that they are compatible and should work! Any ideas or advice?

    Hi I recently bought a pair of earpods for my 3rd Gen ipod shuffle only the remote does not work, so i exchanged them from an unhelpful member of staff from Currys who said the problem could be my device. So i just tested the new ones and the same problem again! I already checked that they are compatible so i don't understand why the remote doesn't work. Will be greatful with any advice or answers on this one. Thanks!

    Actually they are not compatible: http://store.apple.com/us/product/MD827LL/A/apple-earpods-with-remote-and-mic

  • We just got the Bose TV system.  It is great, but the Bose remote doesn't work with our Apple TV unit.  We have to still use the Apple TV remote.  Any suggestions?

    The Bose TV remote doesn't work on the Apple TV.  I have to use the Apple TV remote.  Is it a system problem with the Apple TV?

    My appletv works with its remote
    Ios devices using the remote app
    2 logitech programable remotes harmony ones

  • Remote doesn't work with Universal Docking Station

    Hi
    I have an iPod nano 3rd gen. Whilst in the dock the remote doesn't work at all until I select some music manually using the nano controls. Then I get a response. This is the second docking station from Apple.
    Surely it has been designed to work with the remote as soon as it has been docked to enable scrolling through the menus? There are archived discussions from years ago about the same problem and no solutions! It appears that this product is known to be defective by Apple yet they do nothing and when you call them they act as if the problem doesn't exist. They appear to be selling products that don't work and then do nothing about it.

    i just bought this dock as a car dock. I have it hooked up to power 12v and output to 1/8 into head unit. Now, I have to be in iTunes music to get it to work and it only allows volume, playing of files in a playlist and to next song. Are any of you guys having issues with VERY limited use of the remote and lack of really a benefit from using a remote because you have to touch it anyways to change through songs or video??? Are you guys wondering why you even bought it if the remote is not supported as a functional addition?

  • AirPlay does not work with iPhone 4 s or iPad.Remote doesn´t work as well

    AirPlay does not work with iPhone 4 s or iPad.Remote doesn´t work as well.
    WLAN is working, I can use Youtube on my AppleTV, but I can´t connect to my computer or use airplay on my iPhone or iPad.

    Something is not configured correctly that is creating issues with your AppleTV.  You can disconnect it from the TV and power, and then plug it into your computer with a micro-USB cable.  After launching iTunes on your computer, you will be able to restore it to default settings and upgrade the software.

  • IRadio remote doesn't work

    I have my radio remote from my ipod nano. Iphone says it does not support the accessory. Is there a way to solve this?

    Welcome to the discussions, theengr.
    No, the radio remote doesn't work with the iPhone.

  • HT3180 remote doesn't work 2nd gen

    remote doesn't work 2nd gen

    Welcome to the Apple Community.
    Your Apple TV may have become paired with another remote. Hold the remote close to and pointed at the Apple TV, hold down the menu and Rewind buttons together for 6 seconds or until you see a broken chain icon on screen.

  • Keynote Remote Doesn't work with iPhone, iPad

    Hi,
    I have the latest versions of Keynote on my iPhone 5S, iPad 4 and MacBook Pro 13" with Retina Display.
    All three devices on the same WiFi network. Using WiFi I was able to remotely control/play the presetatnion between iPhone 5S and MacBook.
    However, it doesn't work between iPhone 5S and iPad 4. Any help ?
    I tried Bluetooth as well. They seem to not discover each other and neither able to remote control.
    Any tips ?
    Thanks.

    After having to upgrade to the latest version of iOS Keynote (because I edited one of my presentations online through iCloud), I received the message that Keynote Remote is to be discontinued. The alternative they offer is to download Keynote onto your iPhone as they have integrated the remote feature into the full program.
    The problem that I found is that space is more of a premium on my iPhone than my iPad and I don't use the full program on the iPhone, as the remote app takes only 3MB and the full app? 444MB.
    I hope Apple receive similar complaints about this as nearly half a Gig for what will amount to a remote for Keynote is preposterous. I have already purchased my 16GB 5S, it's not as if I can put more memory in it now.

  • Aio remote doesn't work on windows 8.1, can't findprinter

    hp aio remote on windows cannot find my printer.  i could tell it its ip #, but software disallows this, apparently assuming that sw is perfect and users are incompetent, where the opposite is usu true.  similarly, hp has no feedback mechanism and won't let me use support because mine expired a few mo ago.  so no way to tell hp they have a serious bug.  so it won't be fixed.  just throw out hp aio remote.  it's totally useless. it does have an install sw button, but my sw is installed, and i don't trust a program that can't find a printer nor tell if it's installed. i did download from hp website the latest full sw, which maybe includes aio remote, no way to tell, but no difference.  it also reports printer is offline when it's not. trying to download the latest aio remote seems impossible.  current doesn't tell me version or date.  new is not on hp web.  they refer me to windows store (without a link, tsk tsk), where i can find it (not in microsoftstore.com, but under windows.microsoft.com).  it says v55, no date.  can't download it because there's no download or install or similar button.  hp's concept of "install" seems different from microsoft's, because aio remote doesn't appear in uninstall cpl (named products & features to confuse users) nor 3rd party uninstallers. nor does the full sw.   there is an entry for basic driver sw, misleading us into thinking full sw not installed.  but it is, according to hp's proprietary noncompatible installation mechanism.    there seems no way to invoke aio remote directly (tsk,tsk)but dbl clicking the printer's icon in cpl devices and printers opens an interface with 4 choices, one of which is the non-working aio remote.  the other 3 work. (what's printing, prefs, and customize) it does work on android 4.x (name your own desert).  maybe it's not intended to work on windows?  they why distribute it? my serial # (in case hp reads this and wants to check it out) is th41f7104x and model # 7520e.  great printer.  full sw seems good, scan to pc, etc.  ews (embedded web server interface) works fine except security is unavailable.  hp uses a bogus certificate for its ews.  what's up with that?  presumably there's a way to get hp's cert and copy into my approved cert store, but if there is, i sure can't find it nor any docs.   and hesitate to experiment with security stuff, lest it lock me out.  i remember when even windows had docs. don't waste your time trying to get aio remote to work (as did i).  just use the ews, which remains unprotected from anyone on your wifi.

    Hello Lorenzo 1972,
    It sounds like you are unable to open iTunes even after a fresh install with the error that it cannot find the iTunes.exe file. That path, c:\program files (x86)\itunes\itunes.exe leads to the 32 bit program folder for iTunes. If you are using a shortcut you had on the desktop pre install, try going to C:\program files\itunes\ and finding the iTunes.exe file there.
    If not it sounds like iTunes may be installing a damaged copy of the 32 bit version of the application, so I would recommend the following article to help you get any old installation files out so you can install the 64 bit version fresh:
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/ht1926
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • RM 900 remote doesn't work after driver update

    Hi!
    After solving the proble of? "crackle, pops and noise" with a driver update for Audigy Platinum Ex, I see that my remote is no longer working, i've try reinstalling Remote Center from original drivers and applications CD and after a Volume Up or Down the Rear Left Speaker gives me no sound.
    I've seen in others threads in the forum and they say about installing Media Source, but after installing it still doesn't work.
    Any clue how to make it work again?
    Using Windows XP SP3 and Audigy Platinum Ex.
    Thank you again in advance.
    PD: Excuse my poor english, it's not my nati've language.

    Hello Jashue67,
    Sorry to hear about all the trouble with the Apple TV.  It sounds like you have done a restore but need to pair your Apple TV remote at this point.  You can follow these steps to pair the remote:
    Or, you can press and hold the Menu and Next/Fast-forward buttons on the white Apple Remote, or hold the Menu and right buttons on the aluminum Apple Remote, for 6 seconds to pair.
    You can find the full article here:
    Apple TV: Pairing and unpairing the Apple Remote
    http://support.apple.com/kb/ht1555
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • New ipod shuffle remote doesn't work correctly

    I've bought a player today, plugged in to USB port. iTunes proposed me to update to the latest version - I agreed. So I had the lates updates. When I try to increase volume using remote - it doesn't work. When I stop playing by using middle button then try to change volume level it is changed only for one step even if I pressed 20 times.... I think it's BIG bug...
    Who knows is it can be fixed or not?
    Thank you!

    Somebody know solutions for my problem?
    I guess, maybe it's problem with i use notebook and usb power has below require? I am angry...

  • Firefox command line option "-no-remote" doesn't work with profile.

    I want to run the stripped version of firefox in background with one application and another full version of firefox for normal browsing. I have created the profile for the stripped version of firefox and loading the same using command firefox -P "stripped" -no-remote/firefox -no-remote -P "stripped". But when I start the full version of firefox by launcher "firefox" than it directly loads the stripped version even used the -no-remote option with profile. So I have created launcher for firefox and used the -no-remote with default profile like "firefox -no-remote". It works when first time I click on launcher but for second click it shows the message "Firefox instance is running, or not responding. close the firefox and restart the system". I have gone through the online available documents that suggests that use the -no-remote option with profile so the default profiles works correctly. But -no-remote option doesn't work with the profile. So is there any way to launch the full version of firefox by launcher on second click on launcher?

    Yes, I used separate profiles only. But the -no-remote option doesn't work as mentioned http://kb.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile.
    Please find below the command what I am using
    firefox -P "stripped" -no-remote
    firefox
    If I use the above command than the new firefox window get the configuration from the stripped even if I have used the -no-remote.
    I use the -no-remote with firefox default than it works for the first time.
    I have created the launcher for firefox default. So if I click second time on launcher than it doesn't work.
    firefox -P "stripped"
    firefox -no-remote
    (But doc on link -> http://kb.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile) says do not use the -no-remote with default.
    Do you have any idea why this is happening?

  • Iphone remote doesn't work with itunes anymore.

    I've replaced my wireless router in the last week, but I think remote still worked after that. I don't know what is going on.  Firewall is turned off, bonjour is running (I can see the homesharing from another computer)  But iphone remote doesn't find the library. 

    In iTunes > Preferences > Devices - check what remotes are currently paired, then remove any and start the process from scratch.  Also, check you are signed into iTunes with the same account on your phone and mac.

  • EA4500 guest network re-authentication doesn't work

    I have successfully set up a guest network on my EA4500. Guest laptop associates with guest SSID just fine. Then via IE, it gets prompted for the guest password, which is entered and accepted just fine. At this point guest laptop is on the network. Hooray!
    BUT... at some point the guest laptop will need to reauthenticate (I don't know what the timeout is, but maybe one or two days?). Anyway, it's at this point that IE presents the guest network login page. But now after typing in the password, "enter" or clicking on the button does nothing. It looks like the guest web page doesn't get loaded properly or completely, so the reauthentication can't complete, therefore can't get to the internet. So, while in this state, I've also tried Firefox and Chrome, and same thing, no action when trying to submit the guest password. Tried rebooting guest laptop, and still same problem. Only thing I've found so far that works is to reboot the router. So I'm guessing there's a problem with the guest/web server on the router?? It's a real pain to have to reboot the router every day or two, when I've had other Linksys routers run for months without having to touch them.
    I was running CCC 2.1.38 when I first noticed the problem. Since then I've downgraded to Classic 2.0.37, but it seems I still have the same problem. Again, I can connect & authenticate just fine initially, but when reprompted after some period of time, it doesn't work.
    I've tried contacting Cisco support, but it looks like I'm at 91 days since purchase and thus outside of my 90-day complimentary support, so they happily provided me with the premium support options just to have the honor of talking with them. Guess I shouldn't have spent so much time trying to figure this out myself.
    I've searched the forums here,but so far haven't found any answers (I do see posts where the guest web page isn't presented at all, but in my case the page is presented, just can't do anything). Anyone seen this or have any ideas?

    jaymay -- I agree there's no harm in a reset; just the time to reconfigure, reenter DHCP reservations, etc. I'll keep this as an option as I troubleshoot, but see next...
    TEXXSHARKK -- good news/bad news ... I ended up not yet resetting. Instead, since I had this problem first with CCC firmware 2.1.38 (Build 138828 - the automatically pushed update), I reverted back to Classic 2.0.37. Still same problem with guest re-authentication. Only workaround was to reboot the router. That's when I first posted.
    So, since I had the problem with both CCC and Classic firmware, I ended up going back to CCC. To do that, I needed to manually update, which is 2.1.38 (Build 138880 for web manual download only). SInce (re)updating the firmware, I haven't had a repeat of the original problem. It's been about a week now, and the guest laptop has gone through a number of re-authentications, all without problem. For continued troubleshooting, I've been periodically connecting my iPad, BlackBerry, etc, to the guest network, and they get through the authentication page just fine as well. So that's the good news in that the problem "seems" to have gone away.
    The bad news is that it's still unexplained:
    - There's what I assume is a just a minor build difference between the two CCC firmwares, so it seems unlikely that would make a difference?
    - Could be just the fact of reburning the firmware corrected whatever the problem was -- a la doing a reset, even though I didn't reconfigure, just firmware (re)update
    - Could be the problem is still there biding its time, waiting for me to think it's forever gone, only to pounce again
    If the problem does reappear, I'll update here.

  • Bose Sounddock remote doesn't work with 6th Gen 160GB iPod Classic

    I have recently purchased a Bose Portable Sounddock and whilst my iPod Classic (160GB 6th Gen) will work in the docking station, the only buttons on the remote that work are the volume buttons - everything else has to be done on the device.  It does charge when in the docking station as well.  I have an iPhone 4 that works perfectly a Nano that works perfectly but the Classic won't.  I have spoken to Bose who tell me that there should be no issues with my Classic.  I have reset it to factory settings and it hasn't helped.  I have tried another Sounddock in a local shop and it has the same issues.
    Can anyone suggest a way to fix this?  Any help appreciated.

    Assuming that the Bose Soundock, is brand new and not refurbished or pre-owned
    My Suggestions
    Check that the remote batteries are good.
    Hard Reset the iPod, (press menu and select buton for about 10 secs or till the Apple logo comes ON)
    Restore the iPod (this is to fix any corrupted firmware)
    If the above doesn't work, bring the iPod to the Bose store and try it on their Soundock (bring your remote and test)

Maybe you are looking for