Disjointed Rollovers with .SWF files

Is it possible for me to create a disjointed rollover so that
when I mouse over one image it will make another image switch to a
.SWF file? Or do I have to convert the .swf file into an animated
.GIF file?
How can I make an image switch to something else when I mouse
over a totally different image?

> Is it possible for me to create a disjointed rollover so
that when I mouse
> over
> one image it will make another image switch to a .SWF
file?
Not in any easy way that I can think of.
> How can I make an image switch to something else when I
mouse over a
> totally
> different image?
Behaviors: swap image
-Darrel

Similar Messages

CSS disjointed rollovers with animation?

im redesigning my site and for some reason my rollovers arent working. the top two thumbs are active.. nike and coke:
http://www.toddheymandirector.com/SPOTS/index_2010.html
would it make sense to try this in CSS? and can CSS do disjointed rollovers with animated gifs?

They work for me, but you are not doing yourself a favor by letting the QT file auto-play. It will block UI interavctivity in many cases. As for you otehr question - an image is an image. CSS doesn't care whether the format in itself is animated or static.
Mylenium

Disjointed Rollovers with different results

Hi,
In Dreamweaver CS4 I'm trying to do a disjointed rollover that swaps one image on mouseover and restores it on mouseout (a simple navigation bar rollover) and swaps a second image onclick and doesn't restore the original (an image in the main content area). Right now both images restore on mouseout:
http://inkllusionist.com/test
I realize I may be going about this the wrong way... any advice? Should I try to do this with something other than the javascript behaviors?
...Later...
Well, after more searching I found the answer in a very nice video on youtube.
http://www.youtube.com/watch?v=hN_MhdmtCsM&feature=colike
It explains that you set the simple rollover using the behavior "Set Nav Bar Image" and you do the main image swap using the behavior Swap Image and set that to <A> onClick and uncheck Restore images on Mouseout. It's so simple when ypu know how. lol.

> Is it possible for me to create a disjointed rollover so
that when I mouse
> over
> one image it will make another image switch to a .SWF
file?
Not in any easy way that I can think of.
> How can I make an image switch to something else when I
mouse over a
> totally
> different image?
Behaviors: swap image
-Darrel

Working with SWF files...

We're working on an editor to post letter's to a blog, and we're trying to implement something that will automate the process of adding SWF's to the code. Basically what we're looking for is some way to read the width and the height of the swf while inserting it into the code. We have some Javascript that has been grabbing it, but it doesn't always grab the correct height and width.
function InsertFlash(sFlashFile,id)
var obj = document.getElementById(id);
var w = obj.getAttribute('width');
var iWidth=ReturnWidth(id);
var iHeight = ReturnHeight(id);
alert(iWidth + " " + iHeight);
function ReturnWidth(movie)
     var movieObj = getFlashObj(movie);
     return movieObj.TGetProperty("/", 8);
function ReturnHeight(movie)
     var movieObj = getFlashObj(movie);
     return movieObj.TGetProperty("/", 9);
function getFlashObj(movie)
     try
          if (window.document[movie])
               return window.document[movie];
          if (navigator.appName.indexOf("Microsoft Internet")==-1)
               if (document.embeds && document.embeds[movie])
                    return document.embeds[movie];
          else
                               return document.getElementById(movie);
     catch (e)
          //alert(e.description);
Something to note would be that our SWF's are built from flash files in which the programmer for flash has found canned content and then placed what we need inside of it. But we do have one video that has controls, and basically a screen at the beginning that you press in order for it to play. When it's at this screen, we have the normal dimensions of 400x550, but once you hit play and the movie with the movie controls show up, it varies around the 2200x356 mark, the latter generally staying the same, but the 2200 will bounce around 2000 and 2300 pixels (all in pixels), so that's where we're beginning to get clustermucked. There's a swf file (which holds the correct measurements) a flv file, and another swf file with the controls.
If anyone has run into this before or has a better solution, (using asp classic, no vb), that would be superb!! All we want is the silly dimensions... Hah!

Connect is an AS2 applicaton, and therefore, AS3 SWFs will not work (or not work properly).
If you want to correctly build an application to work in a Connect pod you need to follow the rules in the Collaboration builder, SDK documentation. This has not changed since Connect 6, thus the older version refference.

In Flash CS4 a generated html with swf file won't play swf

Using Flash CS4 and having the Flash plug-in ver 10 on my PC, the generated html file will not play the swf in the browser.
I noticed that the active-x javascript is now included in the header as well as the javascript portion in the body tag.
But it won't play. I get the typical blank window in IE with the "X" in the upper left corner.
I don't have this problem with Flash CS3.
Any ideas what may be going on?
Thank you.

I am having similar difficulty; mostly I am confused.
I want to open a flash video file in a frame within a webpage.
I have generated a Flash CS4 html and swf file. When loaded they play, but they play on a separate, full size web page, not in the frame where I want it.
I then generated FLV and F4V files but that doesn't work.
It appears that I need to insert the object and embed tags "for Flash Movies" in the html file.
Once I do that, do I go back to only putting in the html and swf files and create a link to the html file to bring up the video in the target frame?
What are the FLV files for?

DW CS3 ImageViewer - problem with .swf file

I'm trying to make a slide show in Dreamweaver for the first time. I've searched and found a lot of common problems people have - forgetting to upload the .js file, not including the .swf file, etc.
I think I've done everything right (obviously I'm wrong though), it previews in DW, it works when I preview it in a browser, but when it's uploaded, nothing.
But I think I've found where the problem is. The .swf file that was created doesn't seem to be the right file. When I open it, it shows a blank flash slideshow with three empty slides, just as the sample is when you first open the Imageviewer.
But then what is DW pulling the slideshow from that works in the preview?? How do I re-export the .swf file from DW?
Do my questions even make sense? Sorry, kinda new at all this.
Thanks in advance.
Oh, here is the blank page, but when I view source, the code is there.
http://www.americanindianreport.com/imageviewer.html
The .js file is in the Scripts folder, the .swf is in the same folder. Actually, here you can see why it doesn't work. This is the .swf file, three blank pages:
http://www.americanindianreport.com/imageviewerflash.swf

If you look at my last post, the js file has been overwritten with html code, and this is what will be causing the problem.
The only solution is to delete this file insert a new flash object (any swf file will do for this), then copy the new js file to your server, as your flash will not work with this file.
here is a short example of the js files content (not javascript), -
<html>
<head>
<title>Page not found | www.americanindianreport.com</title>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<link rel="shortcut icon" href="/http://www.falmouthinstitute.com/favicon.ico" type="image/x-icon" />
<link type="text/css" rel="stylesheet" media="all" href="/modules/book/book.css?r" />
<link type="text/css" rel="stylesheet" media="all" href="/modules/node/node.css?r" />
PZ

Trouble with SWF files in Keynote 3

I am working in Keynote for the first time and having trouble bringing in a .swf file. I am having to use a Windows XP box to build the flash file and then moving them over to a Mac to drop into Keynote. I have Keynote 3 and have QuickTime Version 7.0.4 installed. I'm running OS 10.3.9.
When I drop the .swf file onto the slide I am getting a small filmstrip looking icon with a question mark on it. Any ideas on what I have done wrong and need to do?
I have published out with Flash using Flash Player 8, 7, and 6 settings. Nothing works.
second question after I resolve this one is can I make the flash background transparent?
Thank you for any help or assistance.

Actually, some of the newer formats work, but it's hit or miss. I know you have to make sure that you don't havea compress movie checked when you save out as a swf from Flash, that seems to make more of the newer versions work with QT and Keynote.

Adobe presenter - work with swf file

I have a floder called Alpha. In Alpha folder I have Flash folder where my "fla" and "swf" are placed. I have subfolder called "uploaded" in Flsh where I place all my XML files. I call all my text in fla from xml files which are in "uploaded" folder.
In Adobe Presenter, I inserted, swf file which was in "Flash" folder but unable to see any text or animation. please suggest.

I would probably assume that.
I would reccomend a presenter with a "joystick" type control.
The trackball type are a pain, and usually get gummed up like the
old ps2 mice.
When I was in the navy, we had something similar to this for
ward room briefs:
http://www.superwarehouse.com/RemotePoint_Presenter_Wireless_Pointer/VP4300/p/287346

Adobe Cap 5.5 on Moodle - publish without SCORM, with .swf files

Hi,
My agency is using Moodle as a training platform and I need to publish my captivate training files to Moodle.    We track training completion through assessment reports.   I upload two different Adobe Captivate 5.5 training files.
(1)   the training portion with .swf (Raptivity) interactivity
(2)   the assessment portion - published in SCORM
I am able to successfully publish the assessment portion of the Adobe Captivate 5.5 in SCORM to Moodle.     However I am unable to successfully publish the training file.
I do not need to publish the training portion in SCORM so am open to suggesions of the best method to get the training file with Raptivity .swf files working on Moodle. When I publish the file it will work perfectly on our local network but does not work in Moodle. I have tried publishing the training portion (1) with and without SCORM without success.
Thank you for your help.
Note:   Please see my post 4-12-11.   I was unable to list files in the imsmanifest.xml as suggested in the response - and wonder if someone could provide further detail/ support with this suggestion.   How do I add the other tags?   Would someone be able to provide a screen shot of these steps?     Thank you.
Sandra

In the dialog inside Captivate where you set up the path to find the video file. By default, Captivate sets an absolute link, however, this path will be invalid if your video will be moved to another system (e.g. the LMS). You have to alter the default path to make it a relative path. The usual method is to copy the video file into the same publish folder as the Captivate SWF. (By default, Captivate doesn't move your video file for you at publish time.) If your FLV or F4V file is sitting in the same folder as your SWF, then you can just use the filename of the video file as your relative path when setting up the link in the dialog.
I also recommend you ONLY use lowercase filenames at all times for Captivate projects, including the published file and folders, and that you NEVER have spaces in files or folder names. These precautions will eliminate many baffling link failures when projects are moved from a Windows development environment to another webserver environment.

Multipage PDF with SWF files

I'm creatinging a multipage PDF document that has mulitple swf files embedded in it. For example on Page 1 I'm showing a DataGrid and the user has the option to change the datagrid to a columnchart, with the same type of stuff on page 2. When you go from page 1 to page 2 the swf file on page is basically 'unloaded' and if I print the document while on page 2 I can only get the inital view, the data grid, to show up. Is there a command that basically keeps all the swf files loaded so I'm able to print the columnchart on page 1 if I'm on anothe page? I'm new to flex so I'm probably not explaining this well.
thanks,
Bob

Script: http://www.indesignsecrets.com/downloads/MultiPageImporter2.5JJB.jsx.zip
It works great for files upto ~400 pages, when have more pages than that, is when I get the crash at around page 332 .
Thanks

How to use Adobe Flash Player with .swf files?

Hey,
I have a .swf file that I'am trying to open but it seems that I can't. Is there any way that I can use Flash Player to do so?
The .swf I'm trying to open is a game, when i right-click on it and i click on Open With, I don't see Flash Player as one of the options.
Can you help me please? Thanks alot!!!

There IS a standalone Flash Player but is's part of Flash Professional. You'd need to purchase it (or download a 30 day trial, but I don't know if the Flash Player would keep working after the trial expires).

Help with .SWF files!!!!!!!!!

Hey, hope you guys are ok. I nees some BIG help.
I just made a page, with a .SWF intro.... i imported ir to
the index.html and i tested the page.
The problem is when i upload it to the server (www.cjb.net)
and i try to acces the page. The text is there, images ans stuff,
but the movie, is not playing. it stays in a white box and it never
begins. What should I do?.... cjb.net does not support uploading
the .swf file... does anyone can tell me?..... really really... i
need it. Thanks

The flash file is linked as if it were here -
http://www.lemonsfarmequipment.com/new/images/50years.swf
It's not there. This can only mean that your site definition
is
incorrect....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"BurgNET" <[email protected]> wrote in
message
news:eq5n99$l99$[email protected]..
>I opted to just post here instead of starting a new
thread because I think
>I'm
> suffering the same fate as the original poster. I'll try
to explain
> things a
> little bit more thoroughly, however.
>
> I do, in fact have DW 8.0.2. installed.
>
> When I insert .swf files into my pages (Insert >
Media > Flash), I can see
> the
> flash icon in my design window and DW shows no browser
errors. Saving and
> previewing in browser works fine. The .swf plays as
intended. But when I
> upload the page and view it over the web, the .swf is a
white box.
>
> I can link directly to the .swf and my browser plays it
fine, but I cannot
> see
> it when inserted on the page. I have uploaded the script
folder into the
> same
> directory that holds the .htm page. I have tried simple
test pages with
> no
> formatting and only the .swf file, but they don't work
either. I've tried
> implementing the detection kit. Nothing I do changes the
white box.
>
>
http://www.lemonsfarmequipment.com/new/index.htm
>
> I did, however, fire up Front Page 2002 just to see what
would happen, and
> right off the bat, it works. But Front Page is
accomplishing this by
> embedding
> a plug-in.
>
>
http://www.lemonsfarmequipment.com/testflash2.htm
(embedded plug-in
> which
> works)
>
> Any help would be greatly appreciated.
>
> Greg
>

Skin interaction with swf file

When you import a swf into captivate from flash, can you have
the navigation buttons in the "skin" interact with the swf file?
For example, say I made a popup in flash; when the user clicks on
the link, the next button disappears - not allowing them to
continue until they finish the actions on the flash page. Can you
do that? Thanks.

I don't think it's a permission problem, but somehow the
Flash Player thinks (I think) the stream is coming from another
domain. With me a error pops up that goes like this:
SecurityError: Error #2148: SWF-Datei
http://www.streamlineprofits.net/movies/Potential.swf
kann nicht auf lokale Ressource C:\Documents and Settings\Acer
Valued Customer\My Documents\web
projects\streamlineprofits.net\movies\Jan09_Open.m4v zugreifen. Nur
SWF-Dateien in der Sandbox 'local-with-filesystem' sowie
vertrauenswürdige lokale Dateien dürfen auf lokale
Ressourcen zugreifen.
at flash.net::NetStream/play()
at fl.video::VideoPlayer/
http://www.adobe.com/2007/flash/flvplayback/internal::_play()
at fl.video::VideoPlayer/
http://www.adobe.com/2007/flash/flvplayback/internal::_setUpStream()
at fl.video::VideoPlayer/
http://www.adobe.com/2007/flash/flvplayback/internal::_load()
at fl.video::VideoPlayer/load()
at fl.video::FLVPlayback/doContentPathConnect()
Have you tried a super-simple <object>-style embed of
your video?
I really do think it's the Adobe-AC-JS-stuff that's messing
things up?
You could instead consider using swfobject
http://code.google.com/p/swfobject
But first I think you should try an <object>-embed to
see if it's the JS or the Flash that's messing things up.

Problem with swf file on website

I created a swf file with flash CS4. I can do the publish
preview and the video plays just fine. I can even view the
generated html file on my local machine and it works. I upload to
my website and it does not work. Here is the link
http://www.streamlineprofits.net/movies/Potential.html
The player skin is acting like it cant find the swf file but
it is in the same directory. Also, when i go to the publish
settings for the html I select the "Paused at start" but the video
plays when I load the local html file in my browser. Any ideas or
suggestions would be greatly appreciated.
Brian

I don't think it's a permission problem, but somehow the
Flash Player thinks (I think) the stream is coming from another
domain. With me a error pops up that goes like this:
SecurityError: Error #2148: SWF-Datei
http://www.streamlineprofits.net/movies/Potential.swf
kann nicht auf lokale Ressource C:\Documents and Settings\Acer
Valued Customer\My Documents\web
projects\streamlineprofits.net\movies\Jan09_Open.m4v zugreifen. Nur
SWF-Dateien in der Sandbox 'local-with-filesystem' sowie
vertrauenswürdige lokale Dateien dürfen auf lokale
Ressourcen zugreifen.
at flash.net::NetStream/play()
at fl.video::VideoPlayer/
http://www.adobe.com/2007/flash/flvplayback/internal::_play()
at fl.video::VideoPlayer/
http://www.adobe.com/2007/flash/flvplayback/internal::_setUpStream()
at fl.video::VideoPlayer/
http://www.adobe.com/2007/flash/flvplayback/internal::_load()
at fl.video::VideoPlayer/load()
at fl.video::FLVPlayback/doContentPathConnect()
Have you tried a super-simple <object>-style embed of
your video?
I really do think it's the Adobe-AC-JS-stuff that's messing
things up?
You could instead consider using swfobject
http://code.google.com/p/swfobject
But first I think you should try an <object>-embed to
see if it's the JS or the Flash that's messing things up.

Need help with swf files

Hello,
I have a swf file which is 800px x 600px however I have
another swf file which is 475px x 750px. I wish to link these two
files together however I understand that this will be a problem.
Does anyone know how I can link together two swf files which
are of different size without there being a visual problem?
Is it possible to change the dimensions of the screen for one
swf file and then change it back when another one plays?
Any help would be great
Cheers
Gary

thanks for quick respond
So the first of all my main.swf would load, within it i would have a button. If i click on button will take me to frame 40 ( just example ) where i will have this.loadMovie("first.swf"), when this file will be loaded i want to have other button with in the first.swf which will take me back to main.swf and now you are suggesting to use this.removeMovie("first.swf")?
I am not sure if i got you answer right
Thanks again for help i am quite new to ActionScript as you can tell.

Disjointed Rollovers with .SWF files

Similar Messages

Maybe you are looking for