Disk 1 of Enterprise Manager 11g Grid Control not downloading correctly

Hello, I'm downloading Enterprise Manager 11g Grid Control.
The first disk, of three, does not download correctly:
GridControl_11.1.0.1.0_Linux_1of3.zip
On the web page, its size is listed to be around 1.3 GB.
However, when downloading, it thinks its actual file size is only around 643 MB.
So only that much gets downloaded.
But after downloading, this .zip file cannot be opened, it does not appear to a valid .zip file.
Please investigate and fix this.
Thanks
Eugene

Please check from edelivery.oracle.com . You need to unzip all the zips under one dir.

Similar Messages

Enterprise Manager 11g Grid Control Release 1 (11.1.0.1.0) New!

Hi All,
I've been trying to download that software from oracle website for the last 2 days but the zip #1 is always corrupted. I tried from various PC / O/S and always have the same issue.
Anyone know where to download it from another website?
Thanks
Felix

Felix,
Are you referring to http://download.oracle.com/otn/linux/oem/1110/GridControl_11.1.0.1.0_Linux_1of3.zip file? If yes, I have downloaded/extracted the file with no issues (using IE7 and Firefox 3.6.17).
Size: 1.27 GB (1,371,325,446 bytes)
Size on disk: 1.28 GB (1,375,916,032 bytes)
Contains: 1,873 Files, 851 Folders
Thanks,
Hussein

Installing Enterprise Manager 10g Grid Control Using an Existing Database

I want to install Enterprise Manager 10g Grid Control 10.2.0.3 using an existing database. This database is RAC 10.2.0.2. and I use it as Infrastructure Metadata Repository.
I is said in Oracle documentation that SYSMAN schema has to be dropped, thus Database console repository has to be dropped. As far as I understand after Grid Control installation I will not be able to use Database console for my RAC 10.2.0.2 Infrastructure Metadata Repository database. I will be able to use only Grid Control for this database.
Am I right? Could you give me any advice about Installing Enterprise Manager 10g Grid Control Using an Existing Database?
Thank you.

I am trying to install the OEM rel 2.0 on AIX 5L from the downloaded software zip files which are as below,
AIX_Grid_Control_full_10201_disk1.zip (656,766,406 bytes) (cksum - 2157028496)
AIX_Grid_Control_full_10201_disk2.zip (655,758,726 bytes) (cksum - 2350778444)
AIX_Grid_Control_full_10201_disk3.zip (641,760,716 bytes) (cksum - 2053607771)
AIX_Grid_Control_full_10201_disk4.zip (606,903,411 bytes) (cksum - 4162514797)
AIX_Grid_Control_full_10201_disk5.zip (576,555,758 bytes) (cksum - 3304661461)
AIX_Grid_Control_full_10201_disk6.zip (459,658,650 bytes) (cksum - 3120478203)
AIX_Grid_Control_full_10201_disk7.zip (311,903,435 bytes) (cksum - 2438252536)
AIX_Grid_Control_full_10201_disk8.zip (224,594,251 bytes) (cksum - 2618845234)
I am unable to locate the runInstaller in any of the disks 1- 8 ,can somebody help me on this. Thanks

Problem using Enterprise Manager 11g Database Control in Firefox 3.6.6

Hello all,
I just intalled Oracle 11g and trying to familiarize myself with Enterprise Manager 11g Dataabse Control using Firefox 3.6.6 in Windows XP.
I'm able to login to Enterprise manager successfully.
However, when I click on on "Performance Tab", the "SYSTEM_MOVING_WINDOW" is empty, and there's a prompt "Click Here to Download Plugin."
When I do click on it, I get message:
No suitable plugins were found.
Unknown plugin (application/octet-stream) [Manual Install].
I'm not sure what plugin I need so I can use Enterprise Manager properly.
Please help!
Thanks
Giovanni

I use the Opera browser so I can split the screen to monitor multiple instances at the same time on my 2nd monitor. I am not having issues with the 10g OEM but having the same problem listed in this thread with the 11g OEM ( we have both running during our migration to 11g). The posts here didn't help me with the 11g OEM as there must be some difference from 10g OEM. I will hate it if I can't do the split screen to monitor multiple instances at the same time. And if you are connecting via solaris or lunix browser then IE is not an option ( W3C standards please ).

Oracle Enterprise Manager 11g Database Control log file location

Any one knows where the log file is for Oracle Enterprise Manager 11g Database Control. I am trying to set up EUS proxy authentication and running into issues when trying to search proxy user in my DB. The search returns no results and I am not sure where to look for. Please not my setup does work for EUS with shared or exclusive schema. I need to use Oracle DB proxy authentication for my application and that would need a setup of EUS with proxy permissions so please advice if you know where the log file is for Oracle Enterprise Manager 11g Database Control or if there is any logging I can turn on to see what search parameters are passed from Oracle Enterprise Manager 11g Database Control to my DB by using DB audit etc.
Thanks,

Be patient...wait for report.
If after some time report does not appear, go to Advisor Central and find it there.
:p

Oracle Enterprise Manager 10g Grid Control Release 4 (10.2.0.4) HP_UNIX

Is there a date that the above would be available? I do see that it is ready for Windows, Linux, Solaris, HP_Itanium but not HP_UX PA_RISC. Any ideas?
Matthew

Below is what's available for download thru OTN. To ensure my question is clear, approximately when will the MICROSOFT WINDOWS version finally be released:
Enterprise Manager 10g Grid Control Release 1 (10.1.0.2)
Oracle Enterprise Manager 10g Grid Control Release 1 (10.1.0.2) for Linux x86
Oracle Enterprise Manager 10g Grid Control Release 1 (10.1.0.2) for Solaris Operating System (SPARC) (32-bit)
Oracle Enterprise Manager 10g Grid Control Release 1 (10.1.0.2) for HP-UX
Oracle Enterprise Manager 10g Grid Control Release 1 (10.1.0.2) for AIX5L Based Systems
Oracle Enterprise Manager 10g Grid Control Release 1 (10.1.0.2) for HP Tru64 UNIX

Oracle Enterprise Manager 10g Grid Control Release 5

Hi All,
Has anyone here already using Oracle Enterprise Manager 10g Grid Control Release 5? Currently we are using Release 2 of Oracle Enterprise Manager as a package upon installation of Oracle 10g. Curious about Release 5 I want to try it out in our Dev Environment. But before making any changes. I would like to ask guidance from you.
Upon installation does it needs Operating System Patches, Packages etc.? Currently we are using AIX 5L Based Systems (64-Bit) and 10g for Database. Is this a complete installation or Just an upgrade?
Regards,
Dexter

We are using 10.2.0.5 on windows.
10.2.0.5 is just an upgrade
How to install and upgrade on AIX?
http://www.oracle.com/technology/software/products/oem/htdocs/Grid_Control_10.2.0.5.0_AIX5L_readme.html
quick installation quide.
http://download.oracle.com/docs/cd/B19306_01/install.102/b28033.pdf
Hope that will help you.
Anil Malkai

Oracle Enterprise Manager 10g Grid Control Release 1 (10.1.0.2) for Windows

Any new guestimates when product "Oracle Enterprise Manager 10g Grid Control Release 1 (10.1.0.2) for WINDOWS" will finally become available.
Thanks.

Below is what's available for download thru OTN. To ensure my question is clear, approximately when will the MICROSOFT WINDOWS version finally be released:
Enterprise Manager 10g Grid Control Release 1 (10.1.0.2)
Oracle Enterprise Manager 10g Grid Control Release 1 (10.1.0.2) for Linux x86
Oracle Enterprise Manager 10g Grid Control Release 1 (10.1.0.2) for Solaris Operating System (SPARC) (32-bit)
Oracle Enterprise Manager 10g Grid Control Release 1 (10.1.0.2) for HP-UX
Oracle Enterprise Manager 10g Grid Control Release 1 (10.1.0.2) for AIX5L Based Systems
Oracle Enterprise Manager 10g Grid Control Release 1 (10.1.0.2) for HP Tru64 UNIX

Oracle Enterprise Manager 10g Grid Controlにアクセスできない

OS:Linux　Oracle:11.2 GridControl:10.2.0.1
VM上にGridControlをインストールしアクセスしてみましたが（http://192.168.0.1:4889/em）
ページが表示できないと出ます。。
リポジトリ用のDBは11gを使用しています。
GridControlはまだ詳しくないのですが、どのあたりを調査すれば宜しいでしょうか？
基本的な事で申し訳ありませんが、宜しくお願いいたします。

いつもお世話になっております。
Grid Control10.2.0.5のインストールまでは完了したのですが
やはりアクセスできません。。
[oracle@vm1 /]$ /u01/app/oracle/oem_home/oms10g/opmn/bin/opmnctl status
Processes in Instance: EnterpriseManager0.vm1
------------------------------------------------+---------
ias-component | process-type | pid | status
------------------------------------------------+---------
DSA | DSA | N/A | Down
HTTP_Server | HTTP_Server | 4623 | Alive
LogLoader | logloaderd | N/A | Down
dcm-daemon | dcm-daemon | N/A | Down
OC4J | home | 4624 | Alive
OC4J | OC4J_EM | 4621 | Alive
OC4J | OC4J_EMPROV | 4622 | Alive
WebCache | WebCache | 4631 | Alive
WebCache | WebCacheAdmin | 4619 | Alive
コマンドで確認したところ、OMSは稼動しているように見えるのですが
http://vm1:4889/em　でアクセスすると
Forbidden
You don't have permission to access /em/console/home on this server.
Oracle-Application-Server-10g/10.1.2.2.0 Oracle-HTTP-Server Server at vm1 Port 4889
と表示されてしまいます。。
またOMAの起動が以下のように失敗してしまうのですが
これも関係あるでしょうか？
[oracle@vm1 ~]$ /u01/app/oracle/oem_home/agent10g/bin/emctl status agent
Oracle Enterprise Manager 10g Release 5 Grid Control 10.2.0.5.0.
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
[oracle@vm1 ~]$ /u01/app/oracle/oem_home/agent10g/bin/emctl start agent
Oracle Enterprise Manager 10g Release 5 Grid Control 10.2.0.5.0.
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
Starting agent ........................................................................................................................... failed.
OMAが起動していなくても、Girdへのアクセスは出来るのでは？？という認識なので。。
宜しくお願い致します。

Managing multiple database in 10g enterprise manager without Grid control

Hi,
How do we manage multiple databases using oracle 10 g enterprise manager?.
Do we have any java console EM, so that we can add databases as in 9i EM?
Thanks and regards
Suresh HT

Grid Control is the replacement for 9i EM. Without GC, you'll have to manage each database using its database control which isn't good if you have many many databases.
On the client CD, there is a java console you can install which has some packs like change manager but this console is only there temporarily. My understanding is it's there for some features that haven't been added to GC.
HTH

Index Tuning Wizard in Enterprise Manager 10g Grid Control

Hi,
9i OEM has an Index Tuning Wizard. Does anyone know where is it located in 10g Enterprise Manager?
Thanks!
-Ranit.

10g has an SQL Access Advisor (for tuning related to indexes and Materialized views) that is accessible via the OEM GC Advisor Central Link.
Look to DB Targets - Select the DB - Select Advisor Central from the Related Links Section at the bottom - Select SQL Access Advisor.
HTH,
Tony

Enterprise Manager 10g Grid Control?

Hi,
I have one doubt regarding workflowserver.
I am using OWB 10g R1.
I installed workflow server 2.6.3 as per the instructions given in installation guide.
OEM OMS (oracle management service is not installed).
I am able to create process flows and able to execute those using OWB (client).
Now I want to shedule the process flows.
Do I need to install OEM 10g?
Or Is workflow server fulfills this requirement?
Could you please suggest me.
Thanks and regards
Gowtham Sen.

You can submit them as Database Jobs since it is running on Standalone
Ask and Check in the WorkFlow Forum for more WorkFlow stuff answers
Workflow

Download problem with EM 11g Grid Control Release 1 (11.1.0.1.0)

Hi all,
I have problem with Enterprise Manager 11g Grid Control Release 1 (11.1.0.1.0) for Linux x86-64 (64-bit) downloaded archives.
Actually with GridControl_11.1.0.1.0_Linux_x86-64_2of3.zip (1,589,671,704 bytes) (cksum - 535544209)
I successfully downloaded all archives but cksum for this file (...2of3...) is invalid.
Even it is invalid I tried to install. Installation starts ok, but it breaks after few moments.
Regards

Here is cksum from file that I downloaded 3966614633 and on download page is 535544209.
It's obvious that something is wrong!
Oracle personal should fix this issue.
Anyhow, there is another way... Download from different location. See this thread:
Re: Invalid Software Download from OTN for Grid Control 11g on Linux x86_64
Regards

Oracle Enterprise Manager 11g is not running

Hi everyone.
I can't open my Enterprise Manager in my browser.
when I am typing this command "emctl status dbconsole",it gives me this error :
C:\Windows\system32>emctl status dbconsole
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
https://localhost:1158/em/console/aboutApplication
Oracle Enterprise Manager 11g is not running.
Logs are generated in directory E:\app\Ahmad\product\11.2.0\dbhome_1/Ahmad-PC_or
cl/sysman/log
Thanks.

user9077620 wrote:
I type emctl start dbconsole
then it mention to set variable ORACLE_UNQNAME then i did this step
after that i retypr emctl start dbconsole , it gives me this error:
C:\Windows\system32>emctl start dbconsole
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2010 Oracle Corporation. All rights reserved.
https://localhost:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 11g Database Control ...The OracleDBConsoleo
cl service is starting..............
The OracleDBConsoleorcl service could not be started.
A service specific error occurred: 2.
More help is available by typing NET HELPMSG 3547.OS/Networking mis-configuration
Oracle is victim; not culprit

I am trying to integrate EBS 12.1.3 with Enterprise Manager 11g

HI Experts
I need to integrate EBS 12.1.3 with Enertprise Manager 11g grid control.
I have applied patch 8333939 to my OMS Instance successfully.
But I am not able to apply the same to my agent home.
I am following this doc.
http://docs.oracle.com/cd/E11857_01/em.111/e18708/T506934T511454.htm
I need to deploy patch 9757683 to my agent home.
Also silent installation is not working.
Please advise.
Thanks
Vsyed786

I see this error in your output:
2014-11-26 10:55:23,583 ERROR [ThemeAutoDeployer]
java.io.FileNotFoundException: /tmp/liferay/com/liferay/portal/deploy/dependencies/liferay-theme.tld (Too many open files)
I'm not across what the EBS recommended setting for this is, or if there is one. But try running:
ulimit -n
... and if the number is low, edit /etc/security/limits.conf , add some entries for increased "soft nofile" and "hard nofile" and run sysctl -p. See Linux & Java tips: Too many open files .

Disk 1 of Enterprise Manager 11g Grid Control not downloading correctly

Similar Messages

Maybe you are looking for