Disk 2 taking hours
I finally got my video install completed - I swapped out a nicer AGP STB card for an older PCI Matrox card, and that was good.
I started installing disk 2 about 2 hours ago. I opened a terminal window, and a few files systems seem to be getting used. The CD-ROM LED is lit constantly. I see space getting consumed in /var, /var/tmp, and /tmp, but very little.
The install screen has the word "extracting" on it. But, the progress wheel is moving very slowly.
The system in question does have an old CD-ROM drive.
Does this sound familiar? Think it will ever finish? Will I need to replace this old CD-ROM drive?
Thanks!
Fixed - After replacing the CD-ROM hardware, I discovered that the CD-ROM media was bad. I re-burned disk 2, and all is moving along well.
However, in the process I found an interesting piece of information. I re-downloaded disk 2 - but the CD I cut of that wouldn't work because the version was updated.
U5 vs U6.
I now wonder what was updated in U6. Is it documented someplace what changes between the builds?
Similar Messages
-
With one condition included my discoverer report is taking hours to run
Hi,
I am trying to build a discoverer report based on a view and i have defined couple of conditions as per the business requirement. Here is my view which is executing fine from database and at discoverer level.
Now the requirement is to get the details with conditions
1. Application_date is not equal to apply date
2. Applied_amount>0
parameters should be
Application_date low and high
The report is successfully executing when i use condition1 that is application_date<>apply date with parameters mentioned.
But when i define second condition at report level that applied_amount>0, its taking hours to run.
Please advise me the way to use this condition2 so that it should be executed in normal time.
Thanks,
Prathyusha.
Edited by: 958913 on Oct 10, 2012 1:28 PMHi Srini,hussein,
Thanks so much.
Yes srini that is related to my post. I have tried all the options to make that condition workout. But hard luck i could nt able to make this work out.
Im still wondered my query is successfully getting executed in database fine and when i give any condition on applied amount its taking hours to run from discoverer desktop and i dont find it executed anytime till now.
I am not sure about enabling this trace option as i reviewed the ID's suggested by you and seems that all needs to be done with the help of DBA. But i dont have that much time to make this workout. This is an immediate business requirement and i have never seen this problem anytime with discoverer desktop.
Any help would be appreciated.
Thanks,
Prathyusha. -
So my upgrade of 6.1.2 is taking hours by Wifi. How do I do it throuigh iTunes, patched into my computer? Thanks!
Once the Device is asking to be Restored with iTunes... it is too late to save anything...
To minimise loss... Connect to iTunes on the computer you Usually Sync with and Restore from the most recent Backup...
http://support.apple.com/kb/HT1414
Restore from Backup
http://support.apple.com/kb/ht1766 -
Why materialized view taking hours and yet not created
hi,
i am trying to create the following MV
create materialized view MV1
force on demand
start with date 1 next date2
AS
select query 1--> complex query that return approcimately 2 millions rows
union all
select query2 --> complex query that returns 300K rowsit has been taking hours i.e > 4 hrs and still unable to create the MV
w/o the create materialized view statement i am able to return the results from the union of the 2 queries
what might be the possibility ?
tks & rdgsIssue could be due to the complexity of your query..Even i faced the same issue when i worked on materialized views.It was taking too long to create materialized view and then we splitted the query and created two materialized views.
Finally created a View for those MV's.You can also try the same
Materialized View Log
When you create a materialized view using the FAST option you will need to create a view log on the base tables.A fast refresh uses materialized view logs to update only the rows that have changed since the last refresh.
When DML changes are made to the master table's data, Oracle stores rows describing those changes in the materialized view log and then uses the materialized view log to refresh materialized views based on the base table. This process is called an incremental or fast refresh.Without a materialized view log, Oracle must reexecute the materialized view query to refresh the materialized view. This process is called a complete refresh.Usually, a fast refresh takes less time than a complete refresh.
You can go through the below link
http://www.lc.leidenuniv.nl/awcourse/oracle/server.920/a96567/repmview.htm
Thanks
Suni -
My sql query is taking hours to run from toad
SELECT * from (select hr.NAME org_name, ractla.org_id, acct_site.attribute_category,
acct_site.attribute10 general_agent, arc.reversal_category,arr.reversal_gl_date,ard.reversed_source_id,
DECODE (acct_site.attribute_category,
'COMM', acct_site.attribute9,
'IPLAN', acct_site.attribute11,
NULL
) broker_number, -- changed by Michelle
SUBSTR (hca.account_number, 1, 12) customer_number,
ractla.attribute3 plan_type,
SUBSTR (hp.party_name, 1, 15) customer_name,
DECODE (ractla.attribute_category,
'Commercial Receivables', ractla.attribute1,
'Subscriber Receivables', ractla.attribute1,
NULL
) product, --x Product
rax.trx_number trx_number, rax.trx_date transaction_date,
DECODE
(SIGN (INSTR (rax.attribute4, '/')),
1, TO_DATE
( '01'
|| TO_CHAR
(DECODE (SIGN (INSTR (rax.attribute4, '/')),
1, TO_DATE
(SUBSTR (rax.attribute4,
1,
10
'rrrr/mm/dd'
NULL
'MON-RRRR'
'DD-MON-RRRR'
NULL
) coverage_month,
DECODE (SIGN (INSTR (rax.attribute4, '/')),
1, TO_DATE (SUBSTR (rax.attribute4, 1, 10), 'rrrr/mm/dd'),
NULL
) due_date,
DECODE (acct_site.attribute_category,
'COMM', SUBSTR (hca.account_number, 1, 6),
acct_site.attribute10
) employer_group,
DECODE (arc.reversal_category,
'NSF', TRUNC (arr.creation_date),
'REV', TRUNC (arr.creation_date),
DECODE (arr.reversal_gl_date,
NULL, TRUNC (arr.apply_date),
DECODE (ard.reversed_source_id,
NULL, TRUNC (arr.apply_date),
TRUNC (arr.creation_date)
) as application_date,
arr.apply_date,
arr.creation_date, --9/8/03
arc.receipt_number receipt_number, arc.receipt_date receipt_date,
arr.amount_applied applied_amount, rax.attribute1 company,
rax.attribute2 division, ractla.attribute2 coverage_plan, -- (Plan Code)
DECODE (acct_site.attribute_category,
'IPLAN', acct_site.attribute13,
'SH', acct_site.attribute8,
NULL
) coverage_type,
ps.amount_due_original trans_amount,
NVL (ps.amount_due_remaining, 0) trans_amount_remaining,
SUBSTR (hre.first_name || ' ' || hre.middle_name || ' '
|| hre.last_name,
1,
25
) salesrep_name,
SUBSTR (acct_site.attribute5, 1, 5) salesrep_extension,
hca.attribute4 SOURCE
FROM apps.ra_customer_trx_all rax, -- invoice info
apps.ar_payment_schedules_all ps,
apps.ra_cust_trx_types_all rat,
apps.hz_cust_accounts_all hca,
apps.hz_parties hp,
apps.ar_receivable_applications_all arr,
apps.ar_cash_receipts_all arc, --- receipt info
apps.hr_operating_units hr,
apps.hr_employees hre,
apps.hz_cust_acct_sites_all acct_site,
apps.hz_cust_site_uses_all acct_site_use, --added by tapas on 7/16
apps.ra_customer_trx_lines_all ractla,
apps.ar_distributions_all ard
WHERE
hca.cust_account_id = rax.bill_to_customer_id
AND ps.customer_trx_id = rax.customer_trx_id
AND rat.cust_trx_type_id = rax.cust_trx_type_id
AND rat.org_id = rax.org_id
AND arr.applied_customer_trx_id = rax.customer_trx_id
AND arr.status = 'APP'
AND arr.cash_receipt_id = arc.cash_receipt_id
AND hr.organization_id = rax.org_id
AND rax.customer_trx_id = ractla.customer_trx_id
AND ractla.line_number = 1
AND rax.bill_to_site_use_id = acct_site_use.site_use_id
AND hca.cust_account_id = acct_site.cust_account_id
AND acct_site.cust_acct_site_id = acct_site_use.cust_acct_site_id
AND hca.party_id = hp.party_id
AND acct_site.attribute4 = hre.employee_id(+)
AND hr.NAME = 'Commercial Group'
AND ard.source_table = 'RA'
AND ard.source_id = arr.receivable_application_id) app
where app.application_date between :start_date and :end_Date
and app.application_date <> app.apply_date
and app.applied_amount>0;
This is my query..due to some requirement i have written an inline view. The query is getting executed without inline view and even after including inline view but when i included the condition "app.applied_amount>0" its taking hours and i dont see it complete. Please advise. Urgently needed as a discoverer report needs to be built based on this.
Thanks.
Edited by: 958913 on Oct 8, 2012 3:52 PM
Edited by: 958913 on Oct 8, 2012 4:19 PM
Edited by: 958913 on Oct 8, 2012 4:33 PMHi,
the next action plan i have taken is as i need to write a condition that is based on application date(which is not a database column and is getting by a decode statement in the select) i have removed that decode statement from select and written in inline view and there by adding in where condition. Here is the query and still its taking time to run.
/* Formatted on 2012/10/09 13:51 (Formatter Plus v4.8.8) */
SELECT hr.NAME org_name, ractla.org_id, acct_site.attribute_category,
acct_site.attribute10 general_agent, arc.reversal_category,
arr.reversal_gl_date, ard.reversed_source_id,
DECODE (acct_site.attribute_category,
'COMM', acct_site.attribute9,
'IPLAN', acct_site.attribute11,
NULL
) broker_number, -- changed by Michelle
SUBSTR (hca.account_number, 1, 12) customer_number,
ractla.attribute3 plan_type,
SUBSTR (hp.party_name, 1, 15) customer_name,
DECODE (ractla.attribute_category,
'Commercial Receivables', ractla.attribute1,
'Subscriber Receivables', ractla.attribute1,
NULL
) product, --x Product
rax.trx_number trx_number, rax.trx_date transaction_date,
DECODE
(SIGN (INSTR (rax.attribute4, '/')),
1, TO_DATE ( '01'
|| TO_CHAR (DECODE (SIGN (INSTR (rax.attribute4, '/')),
1, TO_DATE
(SUBSTR (rax.attribute4,
1,
10
'rrrr/mm/dd'
NULL
'MON-RRRR'
'DD-MON-RRRR'
NULL
) coverage_month,
DECODE (SIGN (INSTR (rax.attribute4, '/')),
1, TO_DATE (SUBSTR (rax.attribute4, 1, 10), 'rrrr/mm/dd'),
NULL
) due_date,
DECODE (acct_site.attribute_category,
'COMM', SUBSTR (hca.account_number, 1, 6),
acct_site.attribute10
) employer_group,
app.application_date,
arr.apply_date, arr.creation_date, --9/8/03
arc.receipt_number receipt_number,
arc.receipt_date receipt_date, arr.amount_applied applied_amount,
rax.attribute1 company, rax.attribute2 division,
ractla.attribute2 coverage_plan, -- (Plan Code)
DECODE (acct_site.attribute_category,
'IPLAN', acct_site.attribute13,
'SH', acct_site.attribute8,
NULL
) coverage_type,
ps.amount_due_original trans_amount,
NVL (ps.amount_due_remaining, 0) trans_amount_remaining,
SUBSTR (hre.first_name || ' ' || hre.middle_name || ' '
|| hre.last_name,
1,
25
) salesrep_name,
SUBSTR (acct_site.attribute5, 1, 5) salesrep_extension,
hca.attribute4 SOURCE
FROM apps.ra_customer_trx_all rax, -- invoice info
apps.ar_payment_schedules_all ps,
apps.ra_cust_trx_types_all rat,
apps.hz_cust_accounts_all hca,
apps.hz_parties hp,
apps.ar_receivable_applications_all arr,
apps.ar_cash_receipts_all arc, --- receipt info
apps.hr_operating_units hr,
apps.hr_employees hre,
apps.hz_cust_acct_sites_all acct_site,
apps.hz_cust_site_uses_all acct_site_use, --added by tapas on 7/16
apps.ra_customer_trx_lines_all ractla,
apps.ar_distributions_all ard,
(select rax1.customer_trx_id,DECODE (arc1.reversal_category,
'NSF', TRUNC (arr1.creation_date),
'REV', TRUNC (arr1.creation_date),
DECODE (arr1.reversal_gl_date,
NULL, TRUNC (arr1.apply_date),
DECODE (ard1.reversed_source_id,
NULL, TRUNC (arr1.apply_date),
TRUNC (arr1.creation_date)
) as application_date
from apps.ar_receivable_applications_all arr1,
apps.ar_cash_receipts_all arc1,
apps.ra_customer_trx_all rax1,
apps.ar_distributions_all ard1
where arr1.applied_customer_trx_id = rax1.customer_trx_id
AND arr1.status = 'APP'
AND arr1.cash_receipt_id = arc1.cash_receipt_id
AND ard1.source_table = 'RA'
AND ard1.source_id = arr1.receivable_application_id
) app
WHERE hca.cust_account_id = rax.bill_to_customer_id
AND app.customer_trx_id = rax.customer_trx_id
AND arr.apply_date <> app.application_date
and app.application_date between :start_date and :end_date
--AND rax.trx_number IN ('52715888', '52689753')
AND ps.customer_trx_id = rax.customer_trx_id
AND rat.cust_trx_type_id = rax.cust_trx_type_id
AND rat.org_id = rax.org_id
AND arr.applied_customer_trx_id = rax.customer_trx_id
AND arr.status = 'APP'
AND arr.cash_receipt_id = arc.cash_receipt_id
AND hr.organization_id = rax.org_id
AND rax.customer_trx_id = ractla.customer_trx_id
AND ractla.line_number = 1
AND rax.bill_to_site_use_id = acct_site_use.site_use_id
AND hca.cust_account_id = acct_site.cust_account_id
AND acct_site.cust_acct_site_id = acct_site_use.cust_acct_site_id
AND hca.party_id = hp.party_id
AND acct_site.attribute4 = hre.employee_id(+)
AND hr.NAME = 'Commercial Group'
AND ard.source_table = 'RA'
AND ard.source_id = arr.receivable_application_id -
I am trying to update my Ipad 1 but it is taking hours on the backup, what can I do to make this faster?
I'm thinking that you have a corrupt backup. You can try this if you want to give it a shot.
Without connecting the iPad to the computer, launch iTunes. Go to Edit>Preferences>Devices. See how many backups you have for the iPad. If you have multiple backups, delete all but one. Click on the backup in the window and then click on Delete.
Quit iTunes, connect the iPad and then try again. -
Games downloaded direct to iPad. They are now auto downloading to iTunes on M/s PC and taking hours to do so. If I delete those partially downloaded to PC will it affect those on iPad when I next sync iPad with PC?
Any advice appreciated - thanks.
RefloTo start things off, I like to manually manage my media and will insturct you to do the same. To enable doing this, you check off the box for it on your phone's summary on iTunes. Now tranferring media is as easy as dragging and dropping.
(1) To get songs from your phone onto your iTunes, you open up your phone's dropdown menu on the iTunes sidebar and click Music. You can be able to drag music file into your Music folder in the Library section of iTunes. You can also just right click your phone's name and click "Transfer Purchases" if you want to move everything new on your iPhone onto your computer's library.
(2) You open your Music library on your computer and simply drag highlighted songs onto your phone's name on the sidebar. When in album grid view or cover flow, you can click and drag a whole album right on. The downside of manual management is that you can easily accidentally add doubles of songs onto your phone. Of course, if you notice this on your phone, you can just swipe to the right across the song's name and you should have a nice little delete button so you can remove extras anywhere.
(3) I heard about this online and it actually is buried in the Terms and Conditions somewhere. I don't think this rule will apply if you are exchanging the music over your iTunes account devices. I think this applies to buring the iTunes material to CDs. I think these speacial media file can somehow detect what they are moved or copied onto and keep a statistic buried in their coding. This is more of a logical assumption than a fact, but what else could these terms possibly mean? If you want to know more about this, Bruce Willis was having a big arguement about this online because he wanted to give his medie to his children. You can probably find an article about this using those search terms.
I worked hard on this response and would appreciate if you marked it correct if it served as any help to you. Thank you in advance. -
Disk Utility has been Shrinking disk for several hours....
I have an external HD (FW800/GUID) that has 2 partitions in it that I'm trying to reduce the size of one of the partitions to make room for a third without deleting anything on the drive. Disk Utility has been 'shrinking disk' for several hours and I'm debating if it's hanging. I see no activity on the drive, so I'm not sure what's going on.
How long should this typically take to finish?
the partition in question has about 1.3T of data on it and I'm trying to free up about 300G that's unused.
Should I be concerned? How long should I let this go before bailing the app?What's the chance that the data will be corrupt if I force quit disk utility?
In the middle of repartitioning that has apparently hung? I would guess it would range somewhere from high to certain. You should immediately use Disk Utility to repair both partitions after force-quitting.
I didn't make a backup
I hope you're lucky, but I have the feeling you're about to learn your lesson about not having backups in a very severe way. If the drive cannot be repaired at this point, you may need a file recovery utility like [Data Rescue|http://www.prosofteng.com> or [File Salvage|http://subrosasoft.com/OSXSoftware/index.php?mainpage=product_info&productsid=1].
In the future, you absolutely must have a minimum of two backups (three copies) of any data you can't afford to lose. -
Trying to download update to CoPilot Live and CoPilot GPS with maps. Files sizes are large and taking hours to download on wireless connection. How can I download updates and new maps while connected to PC and Itunes through hard wire internet link?
I'm on my iPad, so I don't know if this is the page with an actual download. I don't see a button, but assume that is because I am on an iPad. It is in the DL section of Apple downloads.
http://support.apple.com/kb/DL1708 -
Excel ADODB Sql Query Execution taking hours when manipulate excel tables
Hello All
I have 28000 records with 8 column in an sheet. When I convert the sheet into ADODB database and copy to new
excel using below code it is executing in less than a min
Set Tables_conn_obj = New ADODB.Connection
Tables_conn_str = "Provider=Microsoft.ACE.OLEDB.12.0;Data Source=" & Table_Filename & ";Extended Properties=""Excel 12.0;ReadOnly=False;HDR = Yes;IMEX=1"""
Tables_conn_obj.Open Tables_conn_str
First_Temp_sqlqry = "Select * INTO [Excel 12.0;DATABASE=C:\Prod Validation\Database\Second Acat Table.xlsb].[Sheet1] Table [first - Table$];" Tables_conn_obj.Execute First_Temp_sqlqry
But when I change the query to manipulate one column in current table based on another table in the same excel
and try to copy the results in another excel, it is taking more than one hour.. why it is taking this much time when both the query results returns the same number of rows and column. I almost spend one week and still not able to resolve this issue.
Even I tried copyfromrecordset, getrows(), getstring(), Looping each recordset fields options all of them taking
same amount of time. Why there is huge difference in execution time.
Important note: Without into statement even below query is executing in few seconds.
select ( ''''''manipulating first column based on other table data''''''''''''''
iif(
[Second - Table$].[Policy Agent] = (select max([ACAT$].[new_Agent_number]) from [ACAT$] where [ACAT$].[new_Agent_number] = [Second - Table$].[Policy Agent] and [ACAT$].[ACAT_EffectiveDate] = ( select MAX([ACAT$].[ACAT_EffectiveDate] ) from [ACAT$] where [ACAT$].[new_Agent_number] = [Second - Table$].[Policy Agent]and [ACAT$].[ACAT_EffectiveDate] > '2014-10-01') ) , (select max([ACAT$].[Old_Agent_number]) from [ACAT$] where [ACAT$].[new_Agent_number] = [Second - Table$].[Policy Agent] and [ACAT$].[ACAT_EffectiveDate] = ( select MAX([ACAT$].[ACAT_EffectiveDate] ) from [ACAT$] where [ACAT$].[new_Agent_number] = [Second - Table$].[Policy Agent]and [ACAT$].[ACAT_EffectiveDate] > '2014-10-01')) ,
iif( [Second - Table$].[Policy Agent] = (select max([ACAT$].[Old_Agent_number]) from [ACAT$] where [ACAT$].[Old_Agent_number] = [Second - Table$].[Policy Agent] and [ACAT$].[ACAT_EffectiveDate] = ( select MAX([ACAT$].[ACAT_EffectiveDate] ) from [ACAT$]where [ACA T$].[Old_Agent_number] = [Second - Table$].[Policy Agent]and [ACAT$].[ACAT_EffectiveDate] <= '2014-10-01') ), (select max([ACAT$].[new_Agent_number]) from [ACAT$] where [ACAT$].[Old_Agent_number] = [Second - Table$].[Policy Agent] and [ACAT$].[ACAT_EffectiveDate] = ( select MAX([ACAT$].[ACAT_EffectiveDate] ) from [ACAT$] where [ACAT$].[Old_Agent_number] = [Second - Table$].[Policy Agent]and [ACAT$].[ACAT_EffectiveDate] <= '2014-10-01')) ,
[Second - Table$].[Policy Agent] ))) as [Policy Agent],
''''''summing up all other columns''''''''''''''
(iif(isnull(sum([Second - Table$].[Auto BW-Line Of Business Detail])),0,sum([Second - Table$].[Auto BW-Line Of Business Detail]))) as [Auto BW-Line Of Business Detail],(iif(isnull(sum([Second - Table$].[Auto Farmers])),0,sum([Second - Table$].[Auto Farmers]))) as [Auto Farmers],(iif(isnull(sum([Second - Table$].[MCA])),0,sum([Second - Table$].[MCA]))) as [MCA],(iif(isnull(sum([Second - Table$].[CEA])),0,sum([Second - Table$].[CEA]))) as [CEA],(iif(isnull(sum([Second - Table$].[Commercial P&C])),0,sum([Second - Table$].[Commercial P&C]))) as [Commercial P&C],(iif(isnull(sum([Second - Table$].[Comm WC])),0,sum([Second - Table$].[Comm WC]))) as [Comm WC],(iif(isnull(sum([Second - Table$].[Fire Farmers])),0,sum([Second - Table$].[Fire Farmers]))) as [Fire Farmers],(iif(isnull(sum([Second - Table$].[Flood])),0,sum([Second - Table$].[Flood]))) as [Flood],(iif(isnull(sum([Second - Table$].[Kraft Lake])),0,sum([Second - Table$].[Kraft Lake]))) as [Kraft Lake],(iif(isnull(sum([Second - Table$].[Life])),0,sum([Second - Table$].[Life]))) as [Life],(iif(isnull(sum([Second - Table$].[Foremost])),0,sum([Second - Table$].[Foremost]))) as [Foremost],(iif(isnull(sum([Second - Table$].[Umbrella])),0,sum([Second - Table$].[Umbrella]))) as [Umbrella],(iif(isnull(sum([Second - Table$].[MCNA])),0,sum([Second - Table$].[MCNA]))) as [MCNA]
INTO [Excel 12.0;DATABASE=C:\Prod Validation\Database\Second Acat Table.xlsb].[Sheet1]
from [Second - Table$] group by [Second - Table$].[Policy Agent] ;Hi Fei,
Thank you so much for the reply post. I just executed the same above SQL without INTO Statement and assigned the SQL result to ADODB recordset as below. If the time difference is due to the SQL query then below statements also should execute for hours
right, but it gets executed in seconds. But to copy the recordset to excel again it is taking hours. I tried copyfromrecordset,
getrows(), getstring(), Looping each recordset fields options and all of them taking same amount of time. Please let me know there is delay in time for this much small data
Even I tried to typecast all columns to double, string in SQL and still the execution time is not reduced.
First_Temp_Recordset.Open sql_qry, Tables_conn_obj, adOpenStatic, adLockOptimistic ''' OR SET First_Temp_Recordset = Tables_conn_obj.Execute sql_qry -
Excel ADODB Sql Query Execution taking hours when manipulate excel tables why?
I have 28000 records with 8 column in an sheet. When I convert the sheet into ADODB database and copy to new excel using below code it is executing in less than a min
Set Tables_conn_obj = New ADODB.Connection Tables_conn_str = "Provider=Microsoft.ACE.OLEDB.12.0;Data Source=" & Table_Filename & ";Extended Properties=""Excel 12.0;ReadOnly=False;HDR = Yes;IMEX=1""" Tables_conn_obj.Open
Tables_conn_str First_Temp_sqlqry = "Select * INTO [Excel 12.0;DATABASE=C:\Prod Validation\Database\Second Acat Table.xlsb].[Sheet1] Table [first - Table$];" Tables_conn_obj.Execute First_Temp_sqlqry
But when I change the query to manipulate one column in current table based on another table in the same excel and try to copy the results in another excel, it is taking more than one hour.. why it is taking this much time when both the query results returns
the same number of rows and column. I almost spend one week and still not able to resolve this issue.
Even I tried copyfromrecordset, getrows(), getstring(), Looping each recordset fields options all of them taking same amount of time. Appreciate any inputs...
select ( ''''''manipulating first column based on other table data''''''''''''''
iif( [Second - Table$].[Policy Agent] = (select max([ACAT$].[new_Agent_number]) from [ACAT$] where [ACAT$].[new_Agent_number] = [Second - Table$].[Policy Agent] and [ACAT$].[ACAT_EffectiveDate] = ( select MAX([ACAT$].[ACAT_EffectiveDate] ) from [ACAT$] where
[ACAT$].[new_Agent_number] = [Second - Table$].[Policy Agent]and [ACAT$].[ACAT_EffectiveDate] > '2014-10-01') ) , (select max([ACAT$].[Old_Agent_number]) from [ACAT$] where [ACAT$].[new_Agent_number] = [Second - Table$].[Policy Agent] and [ACAT$].[ACAT_EffectiveDate]
= ( select MAX([ACAT$].[ACAT_EffectiveDate] ) from [ACAT$] where [ACAT$].[new_Agent_number] = [Second - Table$].[Policy Agent]and [ACAT$].[ACAT_EffectiveDate] > '2014-10-01')) ,
iif( [Second - Table$].[Policy Agent] = (select max([ACAT$].[Old_Agent_number]) from [ACAT$] where [ACAT$].[Old_Agent_number] = [Second - Table$].[Policy Agent] and [ACAT$].[ACAT_EffectiveDate] = ( select MAX([ACAT$].[ACAT_EffectiveDate] ) from [ACAT$]where
[ACA T$].[Old_Agent_number] = [Second - Table$].[Policy Agent]and [ACAT$].[ACAT_EffectiveDate] <= '2014-10-01') ), (select max([ACAT$].[new_Agent_number]) from [ACAT$] where [ACAT$].[Old_Agent_number] = [Second - Table$].[Policy Agent] and [ACAT$].[ACAT_EffectiveDate]
= ( select MAX([ACAT$].[ACAT_EffectiveDate] ) from [ACAT$] where [ACAT$].[Old_Agent_number] = [Second - Table$].[Policy Agent]and [ACAT$].[ACAT_EffectiveDate] <= '2014-10-01')) ,
[Second - Table$].[Policy Agent] ))) as [Policy Agent],
''''''summing up all other columns''''''''''''''
(iif(isnull(sum([Second - Table$].[Auto BW-Line Of Business Detail])),0,sum([Second - Table$].[Auto BW-Line Of Business Detail]))) as [Auto BW-Line Of Business Detail],(iif(isnull(sum([Second - Table$].[Auto Farmers])),0,sum([Second - Table$].[Auto Farmers])))
as [Auto Farmers],(iif(isnull(sum([Second - Table$].[MCA])),0,sum([Second - Table$].[MCA]))) as [MCA],(iif(isnull(sum([Second - Table$].[CEA])),0,sum([Second - Table$].[CEA]))) as [CEA],(iif(isnull(sum([Second - Table$].[Commercial P&C])),0,sum([Second
- Table$].[Commercial P&C]))) as [Commercial P&C],(iif(isnull(sum([Second - Table$].[Comm WC])),0,sum([Second - Table$].[Comm WC]))) as [Comm WC],(iif(isnull(sum([Second - Table$].[Fire Farmers])),0,sum([Second - Table$].[Fire Farmers]))) as [Fire
Farmers],(iif(isnull(sum([Second - Table$].[Flood])),0,sum([Second - Table$].[Flood]))) as [Flood],(iif(isnull(sum([Second - Table$].[Kraft Lake])),0,sum([Second - Table$].[Kraft Lake]))) as [Kraft Lake],(iif(isnull(sum([Second - Table$].[Life])),0,sum([Second
- Table$].[Life]))) as [Life],(iif(isnull(sum([Second - Table$].[Foremost])),0,sum([Second - Table$].[Foremost]))) as [Foremost],(iif(isnull(sum([Second - Table$].[Umbrella])),0,sum([Second - Table$].[Umbrella]))) as [Umbrella],(iif(isnull(sum([Second - Table$].[MCNA])),0,sum([Second
- Table$].[MCNA]))) as [MCNA]
INTO [Excel 12.0;DATABASE=C:\Prod Validation\Database\Second Acat Table.xlsb].[Sheet1]
from [Second - Table$] group by [Second - Table$].[Policy Agent] ;Hi Fei,
Thank you so much for the reply post. I just executed the same above SQL without INTO Statement and assigned the SQL result to ADODB recordset as below. If the time difference is due to the SQL query then below statements also should execute for hours
right, but it gets executed in seconds. But to copy the recordset to excel again it is taking hours. I tried copyfromrecordset,
getrows(), getstring(), Looping each recordset fields options and all of them taking same amount of time. Please let me know there is delay in time for this much small data
Even I tried to typecast all columns to double, string in SQL and still the execution time is not reduced.
First_Temp_Recordset.Open sql_qry, Tables_conn_obj, adOpenStatic, adLockOptimistic ''' OR SET First_Temp_Recordset = Tables_conn_obj.Execute sql_qry -
Query is taking hours to give output
Hi All,
The following query is taking hours to give o/p,is there any way to optimize it for a better performance.
I took the expalin plan for the sql.
SELECT SUM(L.EXTENDED_AMOUNT)
FROM mtl_categories cat,
mtl_item_categories mic ,
RA_CUSTOMER_TRX_ALL H ,
RA_CUST_TRX_TYPES_ALL T ,
RA_CUSTOMER_TRX_LINES_ALL L
WHERE cat.category_id = 4341
AND cat.category_id = mic.category_id
AND mic.organization_id = 4
AND mic.category_set_id = 4
AND mic.inventory_item_id = l.inventory_item_id
AND TO_CHAR(H.TRX_DATE,'MON-RR')= 'MAR-12'
AND l.CUSTOMER_TRX_ID = H.CUSTOMER_TRX_ID
AND T.TYPE = 'INV'
AND T.NAME NOT IN ('PB-INV-MEMO', 'PB-RMA-MEMO','PB-CM-MEMO','JM-INV-MEMO','JM-RMA-MEMO','JM-CM-MEMO','JM-CO','PB-CO')
AND H.CUST_TRX_TYPE_ID = T.CUST_TRX_TYPE_ID
AND H.BILL_TO_CUSTOMER_ID =3284explain plan for the sql
| Id | Operation | Name | Rows | Bytes | Cost |
| 0 | SELECT STATEMENT | | 1 | 89 | 417 |
| 1 | SORT AGGREGATE | | 1 | 89 | |
| 2 | TABLE ACCESS BY INDEX ROWID | RA_CUSTOMER_TRX_LINES_ALL | 1 | 15 | 3 |
| 3 | NESTED LOOPS | | 1 | 89 | 417 |
| 4 | NESTED LOOPS | | 42 | 3108 | 291 |
| 5 | MERGE JOIN CARTESIAN | | 56 | 2856 | 11 |
| 6 | NESTED LOOPS | | 1 | 28 | 8 |
| 7 | NESTED LOOPS | | 1 | 13 | 1 |
|* 8 | INDEX UNIQUE SCAN | MTL_CATEGORIES_B_U1 | 1 | 5 | 1 |
|* 9 | INDEX UNIQUE SCAN | MTL_CATEGORIES_TL_U1 | 1 | 8 | |
| 10 | TABLE ACCESS BY INDEX ROWID | MTL_ITEM_CATEGORIES | 1 | 15 | 7 |
|* 11 | INDEX RANGE SCAN | MTL_ITEM_CATEGORIES_N1 | 1 | | 2 |
| 12 | BUFFER SORT | | 57 | 1311 | 4 |
|* 13 | TABLE ACCESS FULL | RA_CUST_TRX_TYPES_ALL | 57 | 1311 | 3 |
|* 14 | TABLE ACCESS BY INDEX ROWID | RA_CUSTOMER_TRX_ALL | 1 | 23 | 5 |
|* 15 | INDEX RANGE SCAN | RA_CUSTOMER_TRX_N11 | 26 | | 2 |
|* 16 | INDEX RANGE SCAN | JM_RA_CUSTOMER_TRX_LINES_N1 | 1 | | 2 |
8 - access("B"."CATEGORY_ID"=4341)
9 - access("T"."CATEGORY_ID"=4341 AND "T"."LANGUAGE"=:B1)
filter("B"."CATEGORY_ID"="T"."CATEGORY_ID")
11 - access("MIC"."ORGANIZATION_ID"=4 AND "MIC"."CATEGORY_SET_ID"=4 AND
"MIC"."CATEGORY_ID"=4341)
filter("B"."CATEGORY_ID"="MIC"."CATEGORY_ID")
13 - filter("SYS_ALIAS_0000"."TYPE"='INV' AND "SYS_ALIAS_0000"."NAME"<>'PB-INV-MEMO' AND
"SYS_ALIAS_0000"."NAME"<>'PB-RMA-MEMO' AND "SYS_ALIAS_0000"."NAME"<>'PB-CM-MEMO' AND
"SYS_ALIAS_0000"."NAME"<>'JM-INV-MEMO' AND "SYS_ALIAS_0000"."NAME"<>'JM-RMA-MEMO' AND
"SYS_ALIAS_0000"."NAME"<>'JM-CM-MEMO' AND "SYS_ALIAS_0000"."NAME"<>'JM-CO' AND
"SYS_ALIAS_0000"."NAME"<>'PB-CO')
14 - filter(TO_CHAR("H"."TRX_DATE",'MON-RR')='MAR-12')
15 - access("H"."BILL_TO_CUSTOMER_ID"=3284 AND
"H"."CUST_TRX_TYPE_ID"="SYS_ALIAS_0000"."CUST_TRX_TYPE_ID")
16 - access("L"."CUSTOMER_TRX_ID"="H"."CUSTOMER_TRX_ID" AND
"MIC"."INVENTORY_ITEM_ID"="L"."INVENTORY_ITEM_ID")
Note: cpu costing is off -
Drive is taking hours to install software
Hello,
I just purchased an iMac 27 inch i7 and when I'm trying to install pro logic it is taking hours to install. I'm on the 3rd disc and it's been going on 4 hours. Do I have a defective DVD drive or is there some kind of fix available? Thanks in advance.Hi, I have a thread here about the exact thing!! Although I thought it was due to the SSD in here or the HDD. I have both. Its neither, its the superdrive!! And its not specific to ANY app. I installed 6 or 8 games anywhere from 2 to 20 GB each. All take a ridiculous amount of time to install. I have spent HOURS installing just FCP application's DVD NOT THE CONTENT. Its terrible.
I know its the superdrive, or something related to the superdrive, because I just went to best buy and purchased a portable, LG brand, 8 X DVD drive and attached it. Its TEARING through the audio content dvd that took almost 3 hours to install last night. It's 90% through and its only been 12 minutes. Your problem is exactly like mine and I originally thought it was my SSD but the content isn't even going on my SSD. Ots going on my HDD.
What really ***** is that I JUST received this after having it built. Now I have to drag this heavy monster down to the Apple store for repair and do without...again. -
Have commenced download of IOS 6.1 but its taking hours instead of minutes whats wrong?
Since the day I installed the update the ios6 I have a few bugs, but especially the batery lost enormously autonomy. 50% at least.
This is outrageous. Impossible to keep the phone in these conditions. Apple must authorize downgrade to ios5 ! -
I have an old 30 GB iPod and it's taking hours to synch. How can it work quicker?
I have an old 30gb iPod & it's taking hours to synch. How can it work quicker?
If it previously worked much faster, there may be data corruption on the iPod's hard drive. The best thing to do is to Restore it using iTunes. Select the iPod in the iTunes sidebar, under DEVICES. Over to the right, go to the Summary tab. Click the Restore button. This will ERASE (reformat) the iPod's hard drive, reinstall its software, and set it to default settings. After Restore completes, re-sync content from your iTunes library.
If you don't want to erase it, because it has content that is not backed up in your iTunes library, please post back...
NOTE: If this problem is caused by a mechanical problem on the iPod's hard drive (not just data corruption), it is possible that the Restore will fail, and your iPod will become non-operable.
Maybe you are looking for
-
My wife and I split up and I got the iPad. But she still knows what I am doing on it. Even though I changed my apple i.d password and everything. She knows who I am talking to what I am doing on fb, my iMessage, emails, how do I get my privacy back w
-
HT201407 can you unlock my i phone?
I lost my i phone and bought another which i had to pay$ 125 to get unlocked yesterday, today i found my original i phone and want to unlock the one I got unlocked yesterday so i can use it with another carrier
-
Can anyone help me with an iWeb problem? I cannot save the site after making changes. I receive this error: "website.sites2 could not be saved"
-
I guess in my first post about this issue I was somewhat unclear. My Airport Utlity is missing. When I go to my Utilities folder and open my Network panel where the Wi-Fi, Ethernet, Bluetooth are displayed, there is suppose to be an Airport Utility
-
Get error during update of indesign & ps
Got automated notification updates available in cc -- hit "install all", bridge & lr update ok -- indesign & ps give error "error encountered during installation (U44M1P7)". my cc subscription is paid up! -- how do I get updates???