Disk and Folder Size Don't Match?

Hi everyone.
My backups.backupd folder is 242.94 gigs, but inside, the folder with my computer's name is only 60 gigs. It's the only thing in that folder. Not sure how a folder gan be 242 gigs, but the only thing inside it be 60gigs.
So that seems like it might be a potential major problem, unless that's just the way it works. Any ideas?

Hey There!
My reply to this person might help you!
http://discussions.apple.com/thread.jspa?threadID=1210125&tstart=0
Good luck!
Sharon

Similar Messages

Volume size and Capacity size Don't match

Hello,
I have a fileshare running Windows 2008 R2 that has a Dynamic Disk that is 1670.78 GB formatted NTFS. The problem is if I look at the properties of the volume it says that the capacity is 987 GB. I'm not sure how to get the capacity up to the
full size of the volume.
The histry is we had a 2003 x64 file share that started life as a scratch place to store files so was RAID 0, according to the original specs for the project that was what they wanted. After time passed the share became permenant storage and loosing
it was actually a problem. At that point I wanted to make it RAID 5. However I also was hoping to keep the Shadow Copies to enable them to find previous versions of files so I ended up creating an iSCSI target and mirroring them through windows,
which made a full backup including the copies. I then broke the mirror rebuilt the RAID and then re-mirrored to the new volume. However becuase of going from RAID 0 to 5 I lost some space so had to resize the volume. I used a 2008 R2 machine
to shring the volume and then raised the capacity back up to the full size. However the space available never actually grew.
At that point I figured the problem was from the machine still running 2003 R2 and having been touched by a 2008 R2 machine. So I scheduled an upgrade and the server is now running 2008 R2, however I am still missing 600GB.
I can't expand the Volume at this point since there is no free space on the disk, and if I try to shrink the volume I get the option of how much to shrink, then after saying ok I get the error: "The parameter is incorrect."   When I look in the
Application Log I see an error saying the volume wasn't defragmented because an error was encountered. "The parameter is incorrect. (0x80070057)"
Please let me know any suggestions or if there is any additional information that would be helpful.
Thank you,
Eric

Hello,
Here is the chkdsk result:
CHKDSK is verifying files (stage 1 of 3)...
406672 file records processed.
File verification completed.
3368 large file records processed.
0 bad file records processed.
0 EA records processed.
0 reparse records processed.
CHKDSK is verifying indexes (stage 2 of 3)...
469986 index entries processed.
Index verification completed.
0 unindexed files scanned.
0 unindexed files recovered.
CHKDSK is verifying security descriptors (stage 3 of 3)...
406672 file SDs/SIDs processed.
Security descriptor verification completed.
31658 data files processed.
CHKDSK is verifying Usn Journal...
314844376 USN bytes processed.
Usn Journal verification completed.
CHKDSK discovered free space marked as allocated in the
master file table (MFT) bitmap.
Windows has made corrections to the file system.
1035144191 KB total disk space.
912448340 KB in 341209 files.
    165660 KB in 31659 indexes.
         0 KB in bad sectors.
    809607 KB in use by the system.
     65536 KB occupied by the log file.
121720584 KB available on disk.
      4096 bytes in each allocation unit.
258786047 total allocation units on disk.
30430146 allocation units available on disk.
Even though it reports altering the free space when I go look at the disk I see this:
(This is the best command I've found to copy into here, if you know a better one please let me know)
DISKPART> detail volume
Disk ### Status         Size     Free     Dyn Gpt
* Disk 1    Online         1670 GB      0 B   *
Read-only              : No
Hidden                 : No
No Default Drive Letter: No
Shadow Copy            : No
Offline                : No
BitLocker Encrypted    : No
Installable            : No
Volume Capacity        : 987 GB
Volume Free Space      : 116 GB
I don't think this is just the difference between size and size on disk, I think for some reason my MFT or something is screwed up.
Please let me know what you would like me to try next.
Thanks,
Eric

Folder size and library size don't match?

I have my iTunes music library located on an external hard drive and when I do the "get info" tool on it it shows up being 43 gigs. However, when I'm using iTunes it says that my total music library is 19 gigs, my videos are only 383 mb, and my podcasts take up 2 gigs. that only amounts to about 21 gigs!? Does this mean that some songs didn't import when initially relocating my music library to my external hard drive? how can I find these songs and import them or delete them?

Hey There!
My reply to this person might help you!
http://discussions.apple.com/thread.jspa?threadID=1210125&tstart=0
Good luck!
Sharon

Paper size and Cell size don't match LR4

Hi I have a prob with the Paper size and the Cell Size not matchng in LR4 using a Sony UP-DR150 printer.
I'm running on Windows home premium 64bit,
i have installed the Sony 64 bit printer driver.
When i print the photo, it prints to the size 4.31 x 3.12 on the 5x7 paper.
can anyone help?

Thank you Janelle, see below! worked like a charme! not sure How I missed that? guess I was making it more complicated then it should be. I also ended up uninstalling and re-installing the printer driver.
But your steps not only got where where I needed to be but even made the print on site option even better now that I can control all 4 side of photo. winstonfoto.com . this give me more room inside photo sleve to fill frame with subjects.
Thanks again. Allen LR rocks!

Paper size and Cell size don't match

I'm running Windows Vista 64-bit, and using a Shinko 2145 printer. I've been able to print 4 x 6 's with no problem but now I've loaded the printer witih 5 x 7 paper. I've gone into the control panel and changed the setting to 5 x 7 paper size, and in lightroom (at the top) it says 5 x 7 but the cell size sticks to 4 x 6. No mater what paper size i set it to, the cell size stays at 4 x 6. How can I change the cell size?

Nothing changes at all, which is driving me crazy =P
This is where the printer is set to 4 x 6, which works
http://img10.imageshack.us/img10/2668/4x6da.jpg
This is where I change the printer to 5 x 7, yet the lightroom settings stick to 4 x 6
http://img693.imageshack.us/img693/977/5x7.jpg

From and/or subject don't match msg body

Hello all. Two weeks ago I posted this problem under a different head, but got no replies, so let me try again as it is messing up maybe 5% of my email.
Every morning I collect email--from 40 to 70 messages, many forwarded from Gmail--and message filtering usually works efficiently to transfer from Inbox to folders. But somewhere along the line, 1 to 3 emails get muddled together: the from and/or subject don't match the text, and sometimes the displayed text includes the Msg Source, including text, from some other, unrelated email.
I've been using FF and TB for more than 10 years now, and believe this kind of email muddling dates only to the last couple months. I use the latest Thunderbird under Windows 7 on a Dell desktop. I have 4 hopefully innocent addons. Of course I can send screenshots and forward the message source for analysis.
Hoping this time to attract attention to the problem! Thanks!

This is an indication of file corruption. Lack of maintenance on your email folders is the usual cause of this.
You can try to repair the file tables and see if that helps. Be prepared to lose messages if the corruption is too bad.
Right click the problem folder. Select Properties and then Repair Folder.
Then read this article about best practices to help prevent this in the future.
http://kb.mozillazine.org/Keep_it_working_-_Thunderbird

Can't make multiclip-- 'frame sizes don't match'

Hi, I am trying to create my first multiclip. I have selected three imported capture files, control-clicked to 'Create Multiclip', and a message comes up saying "Can't create multiclip. Video frame sizes don't match". It true that the three clips have 3 different dimensions (720X480 1440X1080 and 960X720). I'm not sure if these dimensions pertain to the 'video frame size', but I do know that Dianna Weynand's book says that clips of various 'formats' can be made into a multiclip.
Can anyone help me with this?
Thanks, Bob

Well, that is up to you, but my suspicion would be that you will not be happy with 720 x 480 DV (which I hope was shot 16:9 anamorphic) enlarged to 1080i, but it is your call.
If it were me, I would go the other way and make all the media match the smallest frame size, converting everything, including the DV footage to ProRes as the codec. But that is just one opinion, based on the idea that you are never going to improve the DV footage by scaling it larger, and you will do less quality damage to the image of the HD material by scaling it smaller. Of course, it will no longer be HD.
You might want to do some tests before you commit all your footage, and the wiseness of your choice will be dependent on what format you ultimately want to deliver your finished project in, and what purpose that format has.
Hope this helps.
MtD

Home folder size does not match sum of its contents?

My Home folder using the Get Info command displays that it is around 550GB in size. In trying to find where the large files/folders might be so I can remove them, I Get Info on all the nested folders of the Home folder; Desktop, Documents, Downloads, Movies, Pictures, Music, etc. All these folders combined add up to around 25GB, which clearly isn't even close to 550 GB. I dont understand why there is such an enormous difference. What else can I do to find out what is taking up so much space? It's a fairly new iMac in recent months (not a MacBook Pro), and running 10.8.5. I dont have hardly any files on it since its so new.

Hi Beau,
Without taking a look at any logs from your device, I strongly suggest to run a rescue CD.
Download the image called "The Accelerator Binary Image" for whatever WAAS version you currently run.
Burn the cd and follow this steps:
Insert the rescue CD on the box and reload the WAE
You should see the following menu automatically:
-     Installer Main Menu: ( please do 2,3,5,8)
-     >     1. Configure Network
-     >     2. Manufacture flash
-     >     3. Install flash cookie
-     >     4. Install flash image from network
-     >     5. Install flash image from cdrom
-     >     6. Install flash image from disk
-     >     7. Recreate RAID device (WAE-674/7341/7371 only)
-     >     8. Wipe out disks and install .bin image
-     >     9. Exit (Eject and reboot)
Remove the CD from the WAE –reboot it.
here are the steps again: ( this guide is for an old version 4.0 but the steps are the same for any version)
http://www.cisco.com/en/US/docs/app_ntwk_services/waas/waas/v4013/configuration/guide/maint.html#wp1105207
I don't usually ask this but,, please do the steps above twice on your device ( just in case).
best of luck!

Printing from InDesign and Photoshop - colors don't match

I'm printing the same CMYK image from Photoshop and from InDesign, to a HP desktop color printer. I'm using CS3, all the color settings are identical in both programs, but the printed colors don't match. Any suggestions would be greatly appreciated.
(cross-posted in InDesign forum)

I have had the same problem: an image printed from PS differs from the same image printed from ID. However, I can't very well print as bitmap from ID since the image is part of a spread, including text. I have tried various combinations of settings. I made the PS image to 100% of the ID final size (in the layout). I tried various print dialogue settings (high transparency flattener, medium transparency flattener, color managed, not color managed, CMYK output and leave unchanged ... every combination I could think of). ID does something on printer output. My understanding (at least from CS2) was that ID output to printer uses a PDF format of some sort. I had the idea maybe the ID output did some sort of resampling or re-rendering of the image, but have not prooved that out. I did get some slight improvement in the ID output when the image in the ID layout was put in at 100% (whereas it had been 88% (the original image being bigger than the ID layout size). What I am getting now in CS3 is a clean looking photo in PS, but in ID, skin tones look somewhat blotchy and a bit more saturated. The PS image is better than ID, and while ID is not bad, why is it not as clean as PS? I can definitely see the difference between PS and ID output and know it will show on press, too. Any suggestions?

Songs and album covers don't match up?

On my 4s, when I enabled Icloud and downloaded my music library something got out of sync. Now, most songs don't match up to the album cover etc. displayed on my screen. I have tried deleting and downloading again and the problem remains. Any suggestions?

Album cover images depend on whether you downloaded the album/song off the pre-installed iTunes store on the iPod or you downloaded an mp3 from your computer into iTunes then synced it to the device, the only solution in this case without consulting apple help directly would be to try purchasing a song or album from the on-device iTunes store and seeing if you get a cover image then, otherwise I'd seek help from apple themselves as it may be a software issue and you could possibly get your device looked at or replaced under your 1 year warrantee. That is if your still covered.
hope this helps, olly.

Powershell - Daily disk and folder usage; trouble with code to loop through the individual folders

Hi,
I'm very new to Powershell but through the help of this forum and the help on the internet I have scraped together a script that will loop through the disks of a set of servers listed in a text document, and give the capacity statistics in html
format.
I have two questions. I've tried modifying this to also loop though the individual folders on each disk and give the amount of space used to no avail. does any one have any suggestions?
Secondly, how do I get this to append? all I want to do is set up a scheduled task that runs this report daily. I know I will need to add a date column, but I just want the data to append to the previous set of results.
Thanks for any advice in advance.
# Continue even if there are errors
$ErrorActionPreference = "Continue";
# Set your warning and critical thresholds
$percentWarning = 100;
$percentCritcal = 15;
# REPORT PROPERTIES
# Path to the report
$reportPath = "C:\";
# Report name
$reportName = "DiskSpaceReport_$(get-date -format ddMMyyyy).html";
# Path and Report name together
$diskReport = $reportPath + $reportName
#Set colors for table cell backgrounds
$redColor = "#FF0000"
$orangeColor = "#FBB917"
$whiteColor = "#FFFFFF"
# Count if any computers have low disk space. Do not send report if less than 1.
$i = 0;
# Get computer list to check disk space
$computers = Get-Content "C:\serverlist.txt";
$datetime = Get-Date -Format "dd-MM-yyyy_HHmmss";
# Create and write HTML Header of report
$titleDate = get-date -uformat "%d-%m-%Y - %A"
$header = "
<html>
<head>
<meta http-equiv='Content-Type' content='text/html; charset=iso-8859-1'>
<title>DiskSpace Report</title>
<STYLE TYPE='text/css'>

</style>
</head>
<body>
<table width='100%'>
<tr bgcolor='#0B6121'>
<td colspan='7' height='30' align='center'>
<font face='calibri' color='#E0F8F7' size='4'><strong>Daily Disk Utilization Report for $titledate</strong></font>
</td>
</tr>
</table>
Add-Content $diskReport $header
# Create and write Table header for report
$tableHeader = "
<table width='100%'><tbody>
<tr bgcolor=#E0F8F7>
<td width='10%' align='center'>Server</td>
<td width='5%' align='center'>Drive</td>
<td width='15%' align='center'>Drive Label</td>
<td width='10%' align='center'>Total Capacity(GB)</td>
<td width='10%' align='center'>Used Capacity(GB)</td>
<td width='10%' align='center'>Free Space(GB)</td>
<td width='5%' align='center'>Freespace %</td>
<td width='5%' align='center'>RAM %</td>
<td width='5%' align='center'>CPU %</td>
</tr>
Add-Content $diskReport $tableHeader
# Start processing disk space
foreach($computer in $computers)
$disks = Get-WmiObject -ComputerName $computer -Class Win32_LogicalDisk -Filter #"DriveType = 3"
$computer = $computer.toupper()
foreach($disk in $disks)
$deviceID = $disk.DeviceID;
$volName = $disk.VolumeName;
[float]$size = $disk.Size;
[float]$freespace = $disk.FreeSpace;
$percentFree = [Math]::Round(($freespace / $size) * 100);
$sizeGB = [Math]::Round($size / 1073741824, 2);
$freeSpaceGB = [Math]::Round($freespace / 1073741824, 2);
$usedSpaceGB = $sizeGB - $freeSpaceGB;
$color = $whiteColor;
# Start processing RAM
$RAM = Get-WmiObject -ComputerName $computer -Class Win32_OperatingSystem
$RAMtotal = $RAM.TotalVisibleMemorySize;
$RAMAvail = $RAM.FreePhysicalMemory;
$RAMpercent = [Math]::Round(($RAMavail / $RAMTotal) * 100);
# Set background color to Orange if just a warning
if($percentFree -lt $percentWarning)
$color = $orangeColor
# Set background color to Orange if space is Critical
if($percentFree -lt $percentCritcal)
$color = $redColor
# Create table data rows
$dataRow = "
<tr>
<td width='10%'>$computer</td>
<td width='5%' align='center'>$deviceID</td>
<td width='10%' >$volName</td>
<td width='10%' align='center'>$sizeGB</td>
<td width='10%' align='center'>$usedSpaceGB</td>
<td width='10%' align='center'>$freeSpaceGB</td>
<td width='5%' bgcolor=`'$color`' align='center'>$percentFree</td>
<td width='5%' align='center'>$RAMpercent</td>
<td width='5%' align='center'>$CPUpercent</td>
</tr>
Add-Content $diskReport $dataRow;
Write-Host -ForegroundColor DarkYellow "$computer $deviceID percentage free space = $percentFree";
$i++
# Create table at end of report showing legend of colors for the critical and warning
$tableDescription = "
</table><br><table width='20%'>
<tr bgcolor='White'>
<td width='10%' align='center' bgcolor='#FBB917'>No Warning</td>
<td width='10%' align='center' bgcolor='#FF0000'>Critical less than 10% free space</td>
</tr>
Add-Content $diskReport $tableDescription
Add-Content $diskReport "</body></html>"

The only easy way to create a report like this that accumulates is to design it so the data is output to a CSV file or a database. YOu can then generate the HTML from the persist6ed data.
If you store as XML you can use XSLT (transform) to convert to an HTML report.
I also recommend uing Excel as an HTML report generator. It is much easier and more flexible. PowerShell is not intended to do what you want without designing a whole custom reporting system.
Use the right tool for the right task.
Just because you own a hammer does not mean that the solution to every problem includes a nail.
¯\_(ツ)_/¯

Quicktime mpeg-2 and quicktime versions don't match

I bought quicktime pro and the mpeg-2 add on but the program tells me the versions are not compatible even though they both say the same version identification.
Does anyone know why it tells me the versions are different when they aren't ?

sorry for not putting enough info.
i just bought the quicktime mpeg-2 installer and quicktime pro upgrade for quicktime 7 yesterday(3-15-2009). i installed the pro upgrade and the mpeg-2 installer.
i checked both quicktime and the mpeg-2 installer to see what versions they are. they both say version 7.60.92.0, yet i keep recieve this message:
"QuickTime MPEG2 failed to load because the versions of QuickTime and QuickTime MPEG2 do not match."
But they match exactly. I am stumped. i even uninstalled and reinstalled both of them but still the same message.

SIP and SMTP domains don't match

Hi,
We’ve a situation where SIP, SMTP and AD domain are different than each other and I am sure this will present integration issues at the least...
Speaking from LYNC 2013 and exchange 2010/2013 integration standpoint, could someone please point out to integration process under below circumstances where
SIP domain         uc.contoso.com
SMTP domain      contoso.com
AD domain          contoso.net
Also, how would exactly the logon will occur in this situation?
I'd appreciate if you could point me to relevant document please.
Regards, Pushkal MishrA, This posting is provided “AS IS” with no warranties and confers no rights. I request you to test the solution in lab and post successful outcome you should try this on production.

Hi Pushkal Mishra,
It’s recommend to use the same SIP and SMTP address.
But if they are not the same, they will still work properly if you take some additional work.
I’m assuming that you have published the correct SAN certificate that has every expected SAN name for each domain, then you have to create an additional SRV record for uc.contoso.com.
_autodiscover._tcp.uc.contoso.com
mail.contoso.com        443
In general, Lync will look at your primary SMTP address and attempt to use it to find the EWS URL via Autodiscover after signing in. But if the SIP and SMTP address does not match, you will receive
a security prompt “Lync cannot verify that the server is trusted for your sign-in address”.
To avoid the issue, the best solution in my opinion is to use SRV records for Autodiscover to redirect Lync to the mail.contoso.com A record. (Delete the Autodiscover A record)
Best regards,
Eric

Account and home folder names don't match

i'm the only user on my mac, and the account is set to my full name. somehow, i made the home folder a different name. is there any way to change the home folder name so that it matches what i have as the account name?

home folder name is set to your short login name (not long login name) by default. If that's what it is now I would recommend against changing it. if you REALLY want to change it you can but it's known to cause some issues.
see this link for details.
http://www.macworld.com/article/132693/2008/03/changeshortusername.html

Login Name and Home Folder names don't match

Many months ago I embarked on a mission to clean up a drive which I ported over to another computer and in the process tried to rename the user name but I can't get the home folder to reflect the user's new name.
On launch the computer has the proper user name but the home folder retained the old user name.
Is there a way to correct this?
I am stumped.

Neil
I just wanted to let you know that I will not attempt your procedure yet until my wife has finished her thesis.
I have no reason to believe it will not work but should I make any mistake along the way I would rather have it happen later.
Once I run the procedure I will be back to mark your advice as a solution and answer to my question. So for now I will leave it marked as helpful.
Thanks, I appreciate the quick response and look forward to finally having my wife's iBook consistent in terms of user name, in the meantime the machine is working great!

Disk and Folder Size Don't Match?

Similar Messages

Maybe you are looking for