Disk Crash, reinstall, won't see previously published pages.

So my HD crashed and I had to reformat and reinstall the system and iLife. Now iWeb won't let me create a new page and it won't see the pages that are up on my .mac account. I don't really care about the old pages. i just want to get rid of them and start over, but iWeb won't work now.
Any ideas?
Eric

Your iWeb data is stored, not in your actual html files, but in a file called Domain.sites which is stored in your Home/Library/Application Support/iWeb folder. You should backup this file whenever you make big changes to your site, because if it gets lost or damaged, you will have to start all over. If you want to work on your site on another computer, copy this file to a thumb drive to move it around.
Since it sounds like you don't have this file, my suggestion would be to make a new site with the EXACT SAME site name as the old site, then Publish ALL to .Mac. This should wipe out the old site.
For your future reference, I have an Automator app on my site that will help you backup your Domain file(s). http://iweb.aardvarkland.com

Similar Messages

  • After a disk crash. I tunes does not see the file with my music in it.  How do I fix this?

    Windows 7 PC.  Disk crash.  Restored disk.  Reinstalled itunes.  I tunes does not see my music.  Music is in a folder called myipodmusic.  Has sub folders for artists, below artists has files for songs.  Any ideas??  Actually itunes sees my music titles, just does not play the song.  Says cannot find file. I can direct it to file, but there are 5,000 of them.  Help?

    See turingtest2's user tip Empty/corrupt iTunes library after upgrade/crash

  • Reinstall emailaccounts and emails after hard disk crash ?

    Ist there a way to reinstall my email accounts and email after a hard disk crash ?
    Have a backup available, but unfortunately not the email settings for the mail program, so i cannot do it via "backup".
    How do I get my email accounts and emails (they are available in the library) back in the mail program.
    If it is difficult doing it manually is there a program which can help?
    Kind regards
    Ernest

    Thanks a lot for the quick reply, it was possible to reimport my emails in the Mail Program in Folders
    called
    Imported-1
    Imported-2
    Imported-3
    Imported-4
    Imported-5
    now.
    However by now I was not able to reimport the settings&rules of my 5 Mail-Accounts ... ??
    (The must be saved somewhere on the systems)
    So I have a lot of emails but no account by now.
    (Of course 1 fake account to start the Mail program)
    Thx for any input ...
    Kind regards
    Ernest

  • Reinstal  CS6 after disk crash

    I try to reinstall CS web Premium after disk crash
    when I try to start Photoshop for exemple Adobe call me a serial number
    I have serial number for CS5 and CS6 but screen answer: The serial number is valid but on computer there isn't the product
    I have cs5 design premium and is Ok
    Now I need my application I payed for it
    Where is the problem
    Many thanks
    Ermes

    Try Web Chat. There is a link at the bottom of this page:
    Adobe ID, sign in, and account help

  • Bios won't see s-ata disk...

    My bios won't see my WD 36,7 Raptor. When i start windows installer, it give me the F6 choise and i install the Fasttrak 376 driver or s-ata 376\378 driver (tried both), then windows is about to start installing but can't find my hardisk. Everything is connected correct so i don't understand whats wrong.
    can anyone help me, please?     tnx

    press ctrl + f during boot up and create a raid array.
    THEN you press f6 key as you described.
    you need to create a raid array even if its only 1 drive.
    you should also consider to change that crap psu you got.
    a q-tec 400w is MUCH worse than a enermax 300w for example and they tend to blow up way to often

  • Formatted HD and iPod won't see songs that I have reinstalled on HD

    I formatted my HD. I copied the library of the iPod back onto the computer into MyMusic. However my iPod won't see any of the songs that I recopied onto the computer. I was forced to reformat the iPod. My song library is in MyMusic the whole time but the iPod won't see any of it. How can I get my iPod to see the songs in MyMusic.

    " However my iPod won't see any of the songs that I recopied onto the computer"
    What exactly does that mean? The iPod is not supposed to "see" your music in your "My Music" folder.
    I don't get what you're saying, or what the issue actually is.

  • Extension Manager won't See My products?

    Hello,
    I am running windows 7 64bit and have the CS5 Master suite. Due to low disk space I installed the suite on an external drive which the computer saw as (I) Later I installed a Card reader and it changed all my drive letters, so now the hard drive is seen as (L). For awhile a was able to use Photoshop or any of the programs until I figured out how to change the path in properties to go to the (L) Drive instead of looking for a non existant (I).
    Now I can open the products, but the Extension manager won't see them at all and when I try to install a new purchase or download I get this: http://prntscr.com/spmmq and this is the version I am using http://prntscr.com/spn0a, I do have CS6 as well, but it crashes 2-3 times a day from random things and I have a lot of stuff my photoshop has to load, so it takes almost 1.5 hours to get back up after a crash.. grrr!!!
    I tried downloading CS5 Extension manager to reinstall it, but when I did that it was forcing the installation the the non existant drive (I) I couldn't change the path and when I went to unistall the Extension Manager, there was no option for it to be removed??
    So the question is... is there a way to have my extension manager find the products on the (L) drive???
    Thank you for any help,
    J

    using the Microsoft BlueTooth driver is a requirement for Desktop Manager, not an issue. Please read task 2 of the following article from the public knowledge base:
    KB04132 How to set up Bluetooth connectivity between a BlackBerry smartphone and BlackBerry Desktop Software
    The search box on top-right of this page is your true friend, and the public Knowledge Base too:

  • I will soon be purchasing a new PC running Windows 7. I need to know how to migrate my iTunes Library and apple devices to the PC. Is there a previously published support document on this topic? Thank You.

    I will soon be purchasing a new PC running Windows 7. I need to know how to migrate my iTunes Library and apple devices to the PC. Is there a previously published support document on this topic? Thank You.

    Connect a blank powered external drive to the PC.
    Right click on the Disk in the File manager and choose format: exFAT 
    (if it's a XP machine, first install exFAT from Microsoft and reboot)
    navigate to your user account folders on the PC and drag and drop copy (or copy and paste) to the external drive.
    (if a program has your files, then export them out first)
    Hook up the drive to the Mac, and transfer files to the desktop or to their same appropritate folders.
    Import photo's into iPhoto program, import music into iTunes etc and they will manage those files.
    You can continue to use the external exFAT drive between Mac's and PC's
    Do not format the drive NTFS or FAT, NTFS can't be written too by the Mac and FAT can't hold over 4GB sized files.
    If you format exFAT on the Mac, it likely won't work correctly on the  PC.
    "Migration" type programs are a utter waste of time and effort between PC's and Mac's for the fact that only certain files (and no programs or anything else) will work between them, also it's a hassle and takes too long. So don't even bother with it.

  • How do I recover tunes from my iPod after a hard disk crash?

    I've just received my PowerMac back after a hard disk crash and am having to reinstall all software etc.
    My iPod obviously contains all the music I'd downloaded from the iTunes music store and all the CD's I'd loaded manually into iTunes.
    I can't see any way of copying the tunes on my iPod back into my iTunes library...
    Can anyone help?
    I had to use a data recovery tool to recover data from my disk after the crash and it's going to be a really long job to sort out what's what...
    JJ

    You can't sync or drag your music back from an iPod to iTunes, the transfer of music is designed by default to be one way from iTunes to iPod. However there are a number of third party utilities that you can use to retrieve the files from your iPod, this is just a selection. Have a look at the web pages and documentation for these, they are generally quite straightforward. I use Senuti but check the others out and choose whichever you prefer.
    Senuti Mac Only
    iPodRip Mac Only
    PodWorks Mac Only
    iPod.iTunes Mac Only
    iPod Access Mac and Windows Versions
    YamiPod Mac and Windows Versions
    PodUtil Mac and Windows Versions
    iPodCopy Mac and Windows Versions

  • Disk write error, can't see iPod in usb port, could not format or restore

    I have had them all folks. I won this schuffle in a golf tourney with closet to the hole, I wish I could take that shot back and shank one. In short the iPod new sw releases are crap. Here is what I did:
    Plugged the ipod in a usb port in the back of my desktop to restore, would not restore from the high speed usb's in the frt of my Gateway, why? who knows.
    I did not update the ipod when it asked me to upgrade after the restore, however, I did upgrade iTunes to version 6.0.1.3.
    This config seems to be working, I can go into the ipod, delete the songs that are there and use the autofill and it has worked several times now. Prior to this I would get a disk write error, could not see the ipod in the usb, yada, yada, yada.
    Apple has a serious problem with the latest sw as is evident from this forum. If I helped one person out with this post I am thankful as I am a tech kinda dude, not too much and have played with this, reinstalled the sw, faced east and chanted to Mecaa while rubbing the side of my machine, to no avail.
    While I type this email message it's still working, put a pound in the till folks. This is a first kids, have not been able to do this several times in a row without some sort of error.
    It's all trial and error, hope this helps some of you, let me know.
    Out - Dj
      Windows XP  
      Windows XP  

    hiya!
    hmmmm. okay, if you're connecting to a Toshiba laptop, let's check up on this possibility:
    iPod not recognized correctly on Toshiba laptop
    otherwise, here's a good place to start with that error message:
    "Disk cannot be read from or written to" when syncing iPod or "Firmware update failure" error when updating or restoring iPod
    love, b

  • New HD after disk crash : how restore original partitioning scheme

    Hello, After a mechanical disk crash, american version, I have to replace the hard drive of a X220, american version. Windows 7 Pro was in English.I have two VHD files backup to an external drive, as well as a repair disk.One VHD file is 348 MB and one 199 GB.I could check that the second one contains Windows 7 with software and user files.I assume that the first VHD file is the EFI partition. Because of the mechanical failure there is of course no "recovery partition".I do have a CD of Windows 7 Pro in French if required, but I assume the VHD files should suffice. My question is : how to restore the original partitioning sheme?Which is the size of partitions in bytes and in which order are they? Can someone post the output the partition table (for instance Linux's  "gdisk -l" from a bootable CD or USB key) for an X220 ? Thanks a lot.

    Pete291 I am showing a Photoshop CS6 full version serial number for Windows under your account at http://www.adobe.com/.  Please make sure you are utilizing the serial number which ends with 94.  You can find more details on how to locate your serial number at Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.
    If you are using the serial number registered under your account then you can please provide additional details.  Why are you reinstalling Photoshop CS6?  Did you restore/migrate/transfer/copy files previously to this installation?

  • My phone recently crashed and won't turn back on.

    My phone ( iPhone 5c, IOS 7.3 ) recently crashed and won't turn back on. I randomly looked at my phone and there were green and red horizontal lines flickering. My immediate thought was to try to turn it off, so i could try to turn it back on. I held the home and power button down and the screen went black. When i tried turning it back on ( holding power button ) there was no response. For the past day, my phone hasn't been responding to anything.
    (A day before the crash my phone cracked from a serious fall onto a concrete floor without a case I do not know if this has any relation to the crash )

    (A day before the crash my phone cracked from a serious fall onto a concrete floor without a case I do not know if this has any relation to the crash )
    It most likely has a lot to do with your crash.
    Placing your device into recovery (DFU-Device Firmware Upgrade) mode:
    Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
       1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
           other end of the cable connected to your computer's USB port.
       2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
           until the red slider appears, then slide the slider. Wait for the device to turn off.
                  * If you cannot turn off the device using the slider, press and hold the
                    Sleep/Wake and Home buttons at the same time. When the device turns off,
                    release the Sleep/Wake and Home buttons.
      3. While pressing and holding the Home button, reconnect the USB cable to the
           device. The device should turn on. Note: If you see the battery charge warning,
           let the device charge for at least ten minutes to ensure that the battery has some
           charge, and then start with step 2 again.
      4. Continue holding the Home button until you see the "Connect to iTunes" screen.
           When this screen appears you can release the Home button:
      5. If necessary, open iTunes. You should see the following "recovery mode" alert:
      6. Use iTunes to restore the device.
    If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    If this doesn't help, then make a Genius Appointment and take it in for service.
    Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.
    If your iPod Touch, iPhone, or iPad is Broken
    Apple does not fix iDevices. Instead, they exchange yours for a refurbished or new replacement depending upon the age of your device and refurbished inventories. On rare occasions when there are no longer refurbished units for your older model, they may replace it with the next newer model.
    ATTN: Beginning July 2013 Apple Stores are now equipped to do screen repairs/replacements in-house on iPhone 5 and 5C. In some cases while you wait. According to Apple this is the beginning of equipping Apple Stores with the resources needed to do most repairs for iPhones, iPads, and iPod Touches that would not require major replacements. Later in the year the services may be extended as Apple Stores become equipped and staffed with the proper repair expertise. So, if you need a screen repaired or a broken screen replaced or have your stuck Home button fixed, call your local Apple Store to see if they are now doing these in-house.
    You may take your device to an Apple retailer for help or you may call Customer Service and arrange to send your device to Apple:
    Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
    To contact product and tech support: Contacting Apple for support and service - this includes international calling numbers.
    You will find respective repair costs in the appropriate link:
    iPod Service Support and Costs
    iPhone Service Support and Costs
    iPad Service Support and Costs
    There are third-party firms that do repairs on iDevices, and there are places where you can order parts to DIY if you feel up to the task:
    1. iResq or Google for others.
    2. Buy and replace screen yourself: iFixit

  • How do I get rid of the Microsoft Setup Assistant loop? I migrated my software/documents from another laptop so don't have the disk to reinstall. Please help! Can't open any Microsoft Office software, like Word, and stuck in a loop?

    I migrated my software/documents from another laptop so don't have the disk to reinstall. Please help! Can't open any Microsoft Office software, like Word (for 2008), and stuck in a loop?
    Whenever I select Word Microsoft Setup Assistant appears, asks for feedback, then after selecting okay (both on saying yes or no to feedback) goes on to a registration page. When I click on this it says I've already registered so I just click okay, and then move on to a update page. After this, if I click on Word, the process repeats itself.
    As I said, I don't have the disk to reinstall, and can't find the Office Settings to delete as many pages have suggested I should try. Safe Boot restarting also hasn't worked... Really stuck and need Word very soon for work.
    If you can help, that would be great, and feel free to ask any questions about the situation as I'm not an expert here.
    Cheers,
    Jack

    First, export your contact from iCloud.com and save them on your computer in a safe spot some where (like you desktop).  Use this to help you do this: http://support.apple.com/kb/PH3606
    Next, on both of your devices, go to Settings > iCloud and turn on contacts and select Merge. Then turn off contacts and select 'Delete form my [device]' when prompted.
    Now go back to iCloud.com and select a contact (yes they will all be messed up again) and select Command+A on a Mac or Control+A on a PC to select all of the contacts.  Tap the delete key on your keyboard (or right click /control click a contact and select delete).
    You iPhone, iPad and iCloud.com should not be empty for contacts.
    Go back to Settings > iCloud on both devices and turn on contacts again (you should not see merge this time).
    Next, go back to iCloud.com and import your contacts (those exported .vcards).  You can either drag and drop them into the empty contacts list in your web browser, or you can use the gear icon to import.
    You cleaned up contacts should import correctly into iCloud.com and sync to both of your devices.
    Good luck.

  • Had a recent crash on my macbook, was previously using OS 10.6 I think. Restored from recent Time Machine backup and updated to OS 10.8.2 and now I cannot open Logic Pro 9. I get a 'No entry' Icon and a not supported on this type of Mac message. I cannot

    Had a recent crash on my macbook, was previously using OS 10.6 I think. Restored from recent Time Machine backup and updated to OS 10.8.2 and now I cannot open Logic Pro 9. I get a 'No entry' Icon and a not supported on this type of Mac message. I cannot update either as anything up to 9.1.1 tells me I don't need it yet 9.1.2 tells me I need an eligable Logic Pro Version was not found in applications.
    All of my files are stored in a separate hard drive with only the actual app having been on my Macbook. Should I just reinstall?

    Hi
    To run Mouitain Lion you need to update Logic.
    For the updaters to work the Logic application must be:
    a) Within the Applications folder, and not in any sub-folder
    b) Named "Logic Pro" with no extra numbers or spaces
    CCT

  • How do I mount a disk image that won't open?

    I have an external drive Samsung 500 GB that was failing. I think my MacBook Air (10.6.8) caused it to fail because it wouldn't allow me to eject the disk even though I forced quit all programs. I eventually had to just unplug the drive and this caused the external disk to fail as it had not been ejected properly. Not my fault. It's the MBA's fault for not letting me eject the disk. Now the Samsung disk won't mount properly and I get a message that the drive is failing and I should save the data.
    Anyhow, I used the free version of Data Rescue 3 to try and save the data on the failing Samsung 500 GB drive and move it onto a brand new Toshiba 1 TB drive.
    I was unable to use the normal scanning function of Data Rescue 3 as the hardware of the drive was too damaged, and so I used the clone function on Data Rescue 3 to clone the data onto a non-failing hard drive, with the intent of restoring the data later.
    I am not sure if I was successful in making the disk image. It hung up at the 99.6% point for about 12 hours when I decided to give up on it, and I shut down Data Rescue so I could eject the hard disks.
    However, it would not let me do it. I tried force ejecting but still I could not eject the disks.
    I ended up just unplugging the drives. I think the Samsung drive died almost completely then because it made a whole lot of clicking noises after that (it was only making a few clicking noises before that).
    Anyhow, I plugged the Toshiba 1 TB drive into the computer again and used Data Rescue to scan the drive with the disk image on it to see if I could detect files on that drive.
    It opened up the structure and I was able to see that most or all of the files were there (abbout 450GB of data) just from seeing the information about the files in the structure tree - the labels of the files (file type labels such as jpg, mp4 etc) and the size of the files, although I could not open up the files to check all of them.
    I tested out the restore function of Data Rescue by downloading one file (<10MB) file. I am using the free version and can download one file for free to test things out.
    It worked and I was able to save that file onto a second external drive (Western Digital 500 GB) I had plugged in. I had bought this drive just to do the data rescue.
    So I think the files are salvageable and the disk image is OK.
    However, when I tried to open the disk image in Disk Utility, by opening it as the source and choosing the WD drive as the destination I could not open it. I got an error message. I can't remember what the message was.
    I tried just opening the disk image in Finder by just clicking on the disk image but it won't mount.
    Is that because my hard drive doesn't have enough space? My Desktop on the MBA only has 12 GB free and the WD drive has only 500 GB on it even though the disk image is about 501 GB.
    I don't know why the disk image is that size when the failing Samsung drive only had 450 GB of data on it.
    Anyway, what should I do to mount the disk image?
    I want to mount the disk image so that I can copy or move the files from it to another external drive so that I can save those files.
    Is it because the WD is only 500 GB or does it mean there's a problem with the disk image I made?
    Should I try Carbon Clone Copy? I use that to make backups of my MBA internal HDD though I have never used it for opening or making disk images.
    I have never dealt with disk images before except for dmg files of applications downloaded from the internet.
    I am trying to avoid using Data Rescue 3 as I have to pay for it and if there is a free option, such as Disk Utility, CCC or other, I want to try it to restore the data in the disk image.
    Sadly, I think the Samsung drive is ruined beyong repair as it's making a lot of clicking sounds and doesn't mount properly in Disk Image and I get a message that it's beyond repair or something like that in Disk Utility.
    So I am relying on the disk image I made on the Toshiba drive to restore my files.
    (I think it was the last movie file that caused the problem because it was when I was trying to copy it onto the Samsung external drive, all the problems began - hanging up when copying it, not being able to eject the Samsung disk, causing hardware issues on Samsung disk and getting warning messages on Disk Utility.)
    BTW, I learned how to eject a drive when it won't eject the normal way, I have to use command window and type in commands, but that's another post ....
    Any advice?
    I am thinking of going out and buying a second 1 TB external drive so that I have a disk with enough space to open the 501GB disk image on it, just in case that was the sole problem.
    However, I am not sure that is the case, and I think there may be a problem with the disk image or I am not going the right way about opening it.
    Thanks for any advice.

    I think I've found the solution to this problem.
    http://superuser.com/questions/19426/im-unable-to-mount-a-dmg-getting-a-no-mount able-filesystems-error
    I am following the instructions here:
    I ran into a similar situation. I did what simonair suggested and I received a message in Terminal that Volume mounted successfully. However It did not help me access the mounted Volume neither was I able to confirm the mounted Volume. Nor was I able to mount the image using Disk Drill or even scan through. Nothing succeeded.
    Here is what I did to solve my problem. I see that in this post some suggested that we should convert name.dmg to writable file. I used the command from Terminal to convert but was not successful. INSTEAD alternatively, I used Disk Utility, attached the Volume (yes I got the same message again, ''no mountable system files'' however, Disk Utility nevertheless attached the image, which I was able to do before anyways. This time, I selected it and then clicked New image, and then selected image format read/write, not the compressed option. I created a new image. This time this image was writable however, it still would not mount using Simonair's solution. However, this time I was able to scan it with Disk Drill with exact file locations and folder hierarchy as I had. Recovering all from thereon was a breeze. Just remember: when you create new image of an attached volume and chose not compressed but read/write, you need to have a disk with exact amount of space that totals the total space allocated within that name.dmg file (not the amount of space the data takes). Mine was huge, and luckily I had an external disk with enough space to do that and it took about 5 hours for about 400GB of disk allocation. Good luck.
    And so far it seems to be working. Even though the volume is grayed out on the left side of Disk Utility, I am still able to select it as the source for making a new disk image. I chose Read and Write and no compression.
    The only thing I might be doing differently is that instead of choosing the disk image as the source, I chose the volume as the source. The volume is grayed out, but the disk image is not.
    It seems to be working all right. Keep my fingers crossed.
    If this doesn't work, I will use Data Recovery 3 as a last resort.

Maybe you are looking for