Disk disconnect error when connecting a drive?

Can anyone help with this Firewire problem? I have a recent MacBook Pro running Lion and three firewire LaCie drives of varying vintage. All three are connected to the Mac's single FW port using a FW hub.
Day to day 2 of these drives are always connented, and will power on when I power on the Mac. The third one lives in a rack case along with a FW audio interface.
When I connect the rack case and power it up, the interface switches on, and the third hard drive spins up. At this point the first 2 drives disappear from the desktop and I ALWAYS get a message telling me that they were not ejected safely. A few seconds later they spin up and reappear on the desktop.
Obviously I don't want to risk my data with an unsafe connection method, but I also don't really want to eject both desktop drives, unplug the firewire cable, power up the rack and then reconnect the cable, which is the only way I can think of to make all 3 drives appear at the same time.
My previous MBP running Snow Leopard with the same hub, interface and drives did not have the issue.
Anybody think they know what this is about please?

Thanks for the different responses. Just a few more details. My internal hd is only using 63 of 100g.
So I don't think the disk space issue for disk utility would be the answer to my particular problem. I have also tried using superduper to back up this same drive; however, it would not complete the task either. Would it be better to just back up the user folders separately and maybe the applications folder and then just use the mac os dvd's to install on my new drive? ( I don't guess backing up the applications folder would do any good; they would have to all be reinstalled. ) Just trying to find a way to get this done without having to do to much reinstall work. Any other ideas?

Similar Messages

Disk Utility error when restoring a drive to another drive: Error 6

"Device not configured."
I have a 24" iMac with a 250gig hard drive, and a firewire enclosure with a 160 gig hard drive. The iMac has a windows partition that I am trying to back up on the firewire drive, so that I can repartition and make the windows section bigger, but I keep getting errors when trying to restore.
If I uncheck erase destination, and then click restore, it starts to copy for a few minutes, but after 2-3 gigs of copying I get another error:
"Restore Failure An error (2) occurred while copying. No such file or directory"
This happens again and again and again and again. Any ideas?

Thanks for the different responses. Just a few more details. My internal hd is only using 63 of 100g.
So I don't think the disk space issue for disk utility would be the answer to my particular problem. I have also tried using superduper to back up this same drive; however, it would not complete the task either. Would it be better to just back up the user folders separately and maybe the applications folder and then just use the mac os dvd's to install on my new drive? ( I don't guess backing up the applications folder would do any good; they would have to all be reinstalled. ) Just trying to find a way to get this done without having to do to much reinstall work. Any other ideas?

Disconnect Error when Digital camera is connected

This is the third time now the Disconnect Error pops up when I connect and turn on my digital camera. After the error pop-up goes away, iPhoto asks if I want to import photos and all photos import fine.
I looked in Console to see if there is anything and I found this:
** (process:5105): CRITICAL **: gaimaccount_getstate: assertion `account != NULL' failed
2007-04-26 21:53:03.369 iPhoto[5747] * -[NSTextField setAllowsMultipleSelection:]: selector not recognized [self = 0xc1d1d30]
It all started after I switched USB cables, both are from Sony, 1 for the digital camera and the other for the digital camcorder. I tried the digital cameras original cable but I still got the same error pop-up.
What is causing the disconnect error when I always Eject the icon before disconnecting the USB cable?

R.Bud.U:
Try reformatting the card with the camera. Not just erase but a reformat. I do that after every upload. See if that will clean up that error message.
Do you Twango?

"no ocijdbc11 in java.library.path" error when connecting a TNS database co

Hi
"no ocijdbc11 in java.library.path" error when connecting a TNS database connection
I have the same problem 'error code' when testing the connection to a database although I have an APEX db that connects without a problem.
I have re downloaded jre & SQL Developer just to ensure all files are where they should be with no luck.
I've also tried most of the suggestions in various threads.
Does anyone know what exactly causes this error?
eg; should I be looking for a file called 'ocijdbc11' & put it into the 'java.library.path' path?
Can anyone explain to a newbie at db connections what I should do?
I'm using the 'thin' client as the checkbox is clear & I don't know what path to enter into the correct file to make this work??
This is & needs to connect as a TNS connection & was working fine until recently, the only change I can think of is a move of files from the 'C' drive but I thought redownloading SQL Developer would slove this.
Thanks

When you reinstalled SQL Developer, did you install into a new directory (ie rename or delete the old directory first)?
I don't know if system setup contains directory references (which might be invalid after moving the location of SQL Developer). Does renaming your system2.1.1.64.45 directory (in C:\Documents and Settings\username\Application Data\SQL Developer) help? Note that your connections are in the connections.xml file in the o.jdeveloper.db.connection.11.1.1.2.36.55.30 subdirectory of system2.1.1.64.45 - you will either need to export connections before renaming and then import again after or copy this file to test if you can connect.
Finally, the TNS Names directory preference is just a way of telling SQL Developer where to look for the tnsnames.ora file, rather than just assuming it will pick the right one. If you go to create a new connection, do you get the right list of TNS aliases? If not, then set this preference to the directory where the right tnsnames.ora file lives.
theFurryOne

I keep getting this error when connecting my phone (0xE8000001)

I keep getting this error when connecting my phone (0xE8000001) to iTunes. Sometimes the phone will try and sync for a little bit then it disconnects. What gives?
And yes, I do have the latest version of iTunes (7.3)

i kept getting all the same errors and i just figured it out. after getting an iphone i went from pure excitment to anger as i plugged it in and realized i needed to upgrade to tiger. then i spent over an hour installing tiger and it still didnt work. i got the same itunes error of not recognizing. HERE IS THE FIX....TURN OFF THE IPHONE AND REMOVE FROM THE DOCK. DONT JUST PUT IT TO SLEEP, HOLD DOWN THE BUTTON UNTIL IT ASKS YOU TO SLIDE TO TURN OFF. THEN CLOSE ITUNES. NEXT TURN THE PHONE BACK ON BY RE-DOCKING. START UP ITUNES IF IT DOESNT START IMMEDIATELY. YOU SHOULD START HAVING FUN NOW, ALBEIT SLOW ON THE 1.1 USB.

Error when connecting to terminal

Hello,
I have a BB 8100, Desktop manager 4.6.
Synchronization was working correctly 3-4 weeks ago.
Today, when I tried to synchronize, I had this error message:
0 x 80040fb3
I tried to debug this with the procedure of modifying Last name, first name, etc.... with no success
I tried several time to synchronize again but without success.
Now, the situation is even worse!
New message when I connect my BB to my computer. When I launch Desktop manager, I have the following error:
"Error when connecting to terminal. Make sure that your terminal is correctly connected, then try again"
I can not anymore try to synchronize!
This is very strange, it never happened before.
Nevertheless, Desktop Manager recognize my BB, as I can read on the buttom left part of the screen: Terminal connected (code Pin) recognized xxxxxx.
HELLLLP!
Thanks
Solved!
Go to Solution.

Hello RianaZaire,
Unfortunately, I still have the same error Message.
I have not been able to solve the situation.
I reinstall twice the software.
I tried to connect my Blackberry to my computer with a new cable.
I still have the same error message.
I don't know what to do.
Maybe somebody will read our messages, and help us!
Maybe this information has a link with my blackberry problem:
I also have a problem with an another device. (a TOMTOM GPS system), which happened almost at the same time.
Usually, when I connect this device, it will directly open the GPS sofware ( where I can download the new updating stuff). But since this Blackberry problem, I can not do it anymore. Impossible to connect the TOMTOM onto it. It is not recognize onto my computer.
For information, I also do synchronization of my adress book between my phone and TOMTOM.
HELP HELP

Error when connecting to portal from some machines

Hi all,
Can anyone help me with this.
I get this jserver error when connecting to portal from some
client machines.
I works fine from the others. Any ideas?
This is the error I get:
[08/01/2002 17:41:57:618 GMT+00:00] page/Timeout occurred,
label=73 url=http://odeceixe:81/pls/portal30/!
PORTAL30.wwpro_app_provider.execute_portlet time=15828ms
[08/01/2002 17:41:57:618 GMT+00:00] page/ContentFetcher
Unexpected Exception, name=content-fetcher5
java.io.EOFException: Premature EOF encountered
     at HTTPClient.StreamDemultiplexor.read
(StreamDemultiplexor.java, Compiled Code)
     at HTTPClient.RespInputStream.read(RespInputStream.java,
Compiled Code)
     at java.io.InputStream.read(InputStream.java:95)
     at java.io.InputStreamReader.fill
(InputStreamReader.java:163)
     at java.io.InputStreamReader.read
(InputStreamReader.java:239)
     at oracle.webdb.page.ContentFetcher.run
(ContentFetcher.java, Compiled Code)

Did you ever find the cause of this, I am receiving the same message, but as you said, only when connecting to the portal via a certain pc.

Error when connecting to MDM from different lan

Hi,
I got "Image Server Login Error" when connecting with client to server from different LAN, server is up, and i can connect to it when i in the same LAN. Ports 20003, 20004, 20005 for MDM server discovering and repository port 2345 is accessible through router. Running SP2 5.5.24.06.
Rem: it's not a port problem, when port 2345 is closed i got "WinSock error on connect"
PS: When I used MDM SP1 i connected to him properly in the same case.

Hi Dmitry,
If your repository is set to port 2345, then 4 subsequent ports should be openned also, i.e. 2346-2349.
Regards, Lev

Error When connecting proxy

Hi,
When I try to connect proxy in application, it is not connecting instead when I check whether it is going through proxy or not it is telling that it is establishing direct connection only. Here I have posted part of the coding. Please If any error give me a hint.
            System.setProperty("ProxySet", "true");
            SocketAddress addr = new InetSocketAddress("webcache.mydomain.com",80);
            proxy=new Proxy(Proxy.Type.HTTP,addr);here in this code part I am checking whether is connecting with proxy or not.
URL u = new URL(url);
URLConnection uu=u.openConnection(ScrapperInterface.proxy);
try
                URI uuu = uu.getURL().toURI();
                List l=ProxySelector.getDefault().select(uuu);
                for (Iterator iter = l.iterator(); iter.hasNext(); )
                     Proxy proxy = (Proxy) iter.next();
                     System.out.println("proxy hostname : " +proxy.type());
                     InetSocketAddress add = (InetSocketAddress)proxy.address();
                     if(add == null)
                         System.out.println("No Proxy");
                     else
                         System.out.println("proxy hostname : " +add.getHostName());
                         System.out.println("proxy port : " +add.getPort());
catch (URISyntaxException ex)
                Logger.getLogger(StartThread.class.getName()).log(Level.SEVERE, null, ex);
}Output is:
proxy hostname : DIRECT
No Proxy

Re: Error When connecting proxy You didn't get any error when you created the connection. Your title is misleading. Probably you are misleading yourself - see below.
System.setProperty("ProxySet", "true");That does nothing. There is no such property, contrary to widespread belief.
SocketAddress addr = new InetSocketAddress("webcache.mydomain.com",80);
proxy=new Proxy(Proxy.Type.HTTP,addr);... and using java.net.Proxy has nothing to do with system properties in any case.
URLConnection uu=u.openConnection(ScrapperInterface.proxy);Here you are opening a URLConnection via the proxy. As you got output from the code further down it is clear that this step must have succeeded. So all the code below is pointless.
URI uuu = uu.getURL().toURI();Here you are getting the URI you created the connection for.
List l=ProxySelector.getDefault().select(uuu);Here you are getting the Proxies the default ProxySelector would have given you for that URI. Nothing to do with the URLConnection you created, and nothing to do with the Proxy you created either.
InetSocketAddress add = (InetSocketAddress)proxy.address();So here you are testing the proxy address for the system's default proxy for that URI. Again, nothing to do with what you did above.
What you should be doing here is using the URLConnection you have already created. Not testing an address.

Error when connecting to system

Hi,
I have been off topic for quite a while and when I wanted to pick up today, I couldn't connect to the HANA server anymore. I haven't changed any settings since last setup, all I get is the "Error when connecting to system" in the Quick Lauch of the infornation modeler.
Any suggestions?
THX
Markus

Hello,
did you connect since upgrade to SP03?
You might be looking for this thread.
SAP In-Memory Developer Center - planned downtime 2011-11-15, 10-11am PST
Tomas

My iphone 4s connects and disconnects (repeatedly) when connected to my computer

my iphone 4s connects and disconnects (repeatedly) when connected to my computer, it works perfectly fine when connected to regular chargers, everytime i connect it to my computer it shows the charging symbol and then disconnects and reconnects in less then a second, it will repeat this process forever unless disconnected, sometimes it works perfectly fine and most of the times it does the same thing, I know for a fact its not the wire because i recently bought an ipad mini with retina and its usb is new, it worked with the retina for a day or two and then it kept connecting and disconecting repeatedly, my computer is two months old and i have new hardware in that machine, is it a problem in the usb power fluctuation? i am currently using windows 8.1 and i need solutions, this is super annoying, all my other devices work perfectly fine with the usb ports, all my usbs (2.0 and 3.0) do the connecting and disconnecting sometimes it even works ,what is the problem?

Hello Aqib2024,
Thank you for providing the details of the issue you are experiencing with your iPhone 4s. You have taken some really good steps to isolate the issue. I recommend following the steps in the article below to further isolate and troubleshoot this issue:
iOS: Troubleshooting USB connection
http://support.apple.com/kb/TS1286
Thank you for using Apple Support Communities.
Best,
Sheila M.

When the system status says icloud is OK but it reports "encountered an error when connecting to the server", where do you report the problem, or how do you connect?

When the system status says icloud is OK but logon reports "encountered an error when connecting to the server", where do you report the problem, or how do you connect?

Yes i am hoping staff here will look into things, even if i can not get the speeds back what i previously had for near 6 months it would be nice to know why i can not and why the download has dropped by around 10Mb and why my upload is now inconsistant.
Ironically the post concerned got edited because i actually posted the full rather silly reply the Indian call centre made babbling on about down rates rather than the uprate i queried with them.
Bit of a shambles really no real way on BTs web site to contact anyone with regards to broadband issues.
The form which you kindly suggested and i appreciated your help ended up in the hands of someone who either did not bother to read the query or just had such a poor grasp of English they did not understand the query.
Pretty pathetic really when BT are the largest telco in the UK. I think ill be taking my broadband business elsewhere regardless at the end of my 18 month contract, while im sure staff here are wonderful and may even yet help me, i do not particularly want to go through the almost like pulling teeth pain of getting any future issue looked at.
They are great at quickly fixing voice line problems and have a great test on their site. Broadband side of things and support for that though seems a shambles.

URGENT - INTERNAL SERVER ERROR when connecting to site

i'm getting INTERNAL SERVER ERROR when connecting to site. everything was ok till yesterday night but since today morning, nobody has been able to log in the site.
i looked at the Apache Listener log files in IAS_HOME/Apache/Apache/logs
the error_log file contained the following :-
[Fri Jan 26 08:32:04 2001] [error] [client 127.0.0.1] Invalid method in request ^A
[Fri Jan 26 08:32:05 2001] [error] [client 10.32.12.219] malformed header from script. Bad header=<!DOCTYPE HTML PUBLIC "-//IETF: /servlet/p
age
[Fri Jan 26 08:32:58 2001] [error] [client 127.0.0.1] Invalid method in request ^A
[Fri Jan 26 08:32:58 2001] [error] [client 10.32.12.219] malformed header from script. Bad header=<!DOCTYPE HTML PUBLIC "-//IETF: /servlet/I
sItWorking
[Fri Jan 26 08:33:13 2001] [error] [client 127.0.0.1] Invalid method in request ^A
[Fri Jan 26 08:33:13 2001] [error] [client 10.32.12.219] malformed header from script. Bad header=<!DOCTYPE HTML PUBLIC "-//IETF: /servlet/page
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
then i tried to kill all the httpd processes and restart the apache and the error log was populated with the following :-
[Fri Jan 26 09:35:48 2001] [warn] child process 16269 still did not exit, sending a SIGTERM
[Fri Jan 26 09:35:49 2001] [warn] child process 16270 still did not exit, sending a SIGTERM
[Fri Jan 26 09:35:49 2001] [warn] child process 16271 still did not exit, sending a SIGTERM
[Fri Jan 26 09:35:49 2001] [warn] child process 16272 still did not exit, sending a SIGTERM
[Fri Jan 26 09:35:49 2001] [warn] child process 16273 still did not exit, sending a SIGTERM
[Fri Jan 26 09:35:49 2001] [warn] child process 16274 still did not exit, sending a SIGTERM
[Fri Jan 26 09:35:49 2001] [warn] child process 16275 still did not exit, sending a SIGTERM
[Fri Jan 26 09:35:49 2001] [warn] child process 16276 still did not exit, sending a SIGTERM
[Fri Jan 26 09:35:49 2001] [warn] child process 16277 still did not exit, sending a SIGTERM
,same messages continue for different
,process ids followed by
Assertion failed: wwwctx->alloctotal == 0, file wwcepl.c, line 559
Assertion failed: wwwctx->alloctotal == 0, file wwcepl.c, line 559
Assertion failed: wwwctx->alloctotal == 0, file wwcepl.c, line 559
Attempt to free unreferenced scalar.
Attempt to free unreferenced scalar.
Assertion failed: wwwctx->alloctotal == 0, file wwcepl.c, line 559
Assertion failed: wwwctx->alloctotal == 0, file wwcepl.c, line 559
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
[Fri Jan 26 09:35:53 2001] [error] child process 16269 still did not exit, sending a SIGKILL
[Fri Jan 26 09:35:53 2001] [error] child process 16270 still did not exit, sending a SIGKILL
[Fri Jan 26 09:35:53 2001] [error] child process 16271 still did not exit, sending a SIGKILL
[Fri Jan 26 09:35:53 2001] [error] child process 16272 still did not exit, sending a SIGKILL
[Fri Jan 26 09:35:54 2001] [error] could not make child process 16269 exit, attempting to continue anyway
[Fri Jan 26 09:35:54 2001] [error] could not make child process 16270 exit, attempting to continue anyway
[Fri Jan 26 09:35:54 2001] [error] could not make child process 16271 exit, attempting to continue anyway
[Fri Jan 26 09:35:54 2001] [error] could not make child process 16272 exit, attempting to continue anyway
[Fri Jan 26 09:35:54 2001] [error] could not make child process 16273 exit, attempting to continue anyway
[Fri Jan 26 09:35:54 2001] [error] could not make child process 16274 exit, attempting to continue anyway
[Fri Jan 26 09:35:54 2001] [notice] caught SIGTERM, shutting down
[Fri Jan 26 09:38:10 2001] [notice] Apache/1.3.12 (Unix) ApacheJServ/1.1 mod_perl/1.22 configured -- resuming normal operations
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
[Fri Jan 26 09:38:44 2001] [error] [client 127.0.0.1] Invalid method in request ^A
[Fri Jan 26 09:38:44 2001] [error] [client 10.32.1.81] malformed header from script. Bad header=<!DOCTYPE HTML PUBLIC "-//IETF: /servlet/pag
e
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
[Fri Jan 26 09:39:06 2001] [notice] caught SIGTERM, shutting down
[Fri Jan 26 09:39:30 2001] [notice] Apache/1.3.12 (Unix) ApacheJServ/1.1 mod_perl/1.22 configured -- resuming normal operations
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
[Fri Jan 26 09:42:17 2001] [error] [client 127.0.0.1] Invalid method in request ^A
[Fri Jan 26 09:42:17 2001] [error] [client 10.32.1.81] malformed header from script. Bad header=<!DOCTYPE HTML PUBLIC "-//IETF: /servlet/pag
e
Any ideas or suggestions anyone ....??
what could have possibly changed since yesterday to effect the site ??
any help would be greatly appreciated ...
null

A couple of questions:
1) Did you try shutting down apache with the sript?
2) When killing the httpd processes did you also kill the associated java processes?
null

SSL error when connecting in SAP HANA Cloud Portal tutorial

Hi,
I'm going through the tutorial for SAP HANA Cloud Portal - SAP HANA Cloud Portal Developers Tutorial
Unfortuanatelly I have problems with deploying public destinations (page 9).
When I try to deploy the destination for the CRM back from the command console using neo command with relevant parameters and entering my password I get the following error:
ERROR; SSL error when connecting to https://configapi.hanatrial.onedemand.com/configuraiton/api/rest; server certificate might be invalid or untrusted.
Logfiles.
Session log
2014-08-18 15:53:59,579 DEBUG [main] org.apache.http.impl.conn.tsccm.ThreadSafeClientConnManager$1: Get connection: HttpRoute[{s}->https://configapi.hanatrial.onedemand.com], timeout = 0 2014-08-18 15:53:59,581 DEBUG [main] org.apache.http.impl.conn.tsccm.ConnPoolByRoute: [HttpRoute[{s}->https://configapi.hanatrial.onedemand.com]] total kept alive: 0, total issued: 0, total allocated: 0 out of 20 2014-08-18 15:53:59,581 DEBUG [main] org.apache.http.impl.conn.tsccm.ConnPoolByRoute: No free connections [HttpRoute[{s}->https://configapi.hanatrial.onedemand.com]][null] 2014-08-18 15:53:59,581 DEBUG [main] org.apache.http.impl.conn.tsccm.ConnPoolByRoute: Available capacity: 2 out of 2 [HttpRoute[{s}->https://configapi.hanatrial.onedemand.com]][null] 2014-08-18 15:53:59,582 DEBUG [main] org.apache.http.impl.conn.tsccm.ConnPoolByRoute: Creating new connection [HttpRoute[{s}->https://configapi.hanatrial.onedemand.com]] 2014-08-18 15:53:59,729 DEBUG [main] org.apache.http.impl.conn.DefaultClientConnectionOperator: Connecting to configapi.hanatrial.onedemand.com/216.128.6.149:443 2014-08-18 15:54:00,035 DEBUG [main] org.apache.http.impl.conn.DefaultClientConnection: Connection closed 2014-08-18 15:54:00,035 DEBUG [main] org.apache.http.impl.conn.DefaultClientConnection: Connection shut down 2014-08-18 15:54:00,036 DEBUG [main] org.apache.http.impl.conn.tsccm.ThreadSafeClientConnManager: Released connection is not reusable. 2014-08-18 15:54:00,036 DEBUG [main] org.apache.http.impl.conn.tsccm.ConnPoolByRoute: Releasing connection [HttpRoute[{s}->https://configapi.hanatrial.onedemand.com]][null] 2014-08-18 15:54:00,037 DEBUG [main] org.apache.http.impl.conn.tsccm.ConnPoolByRoute: Notifying no-one, there are no waiting threads
Console log
2014-08-18 15:53:56,080 INFO [main] com.sap.jpaas.infrastructure.console.CommandManager: Starting execution of command [get-destination] 2014-08-18 15:53:56,086 INFO [main] com.sap.jpaas.infrastructure.console.CommandManager: Command [get-destination] init() finished for [1] ms 2014-08-18 15:54:00,038 INFO [main] com.sap.jpaas.infrastructure.console.CommandManager: Command [get-destination] cleanup() finished for [0] ms 2014-08-18 15:54:00,046 FATAL [main] com.sap.jpaas.infrastructure.console.ConsoleClient: (!) ERROR; SSL error when connecting to https://configapi.hanatrial.onedemand.com/configuration/api/rest; server certificate might be invalid or untrusted com.sap.jpaas.infrastructure.console.exception.ValidationException at com.sap.jpaas.infrastructure.console.command.RemoteCommand.getHttpClient(RemoteCommand.java:97) at com.sap.jpaas.infrastructure.console.command.UnsecuredRemoteCommand.getHttpClient(UnsecuredRemoteCommand.java:57) at com.sap.core.connectivity.config.cmd.ConfigurationConsoleCommand.createHttpClient(ConfigurationConsoleCommand.java:254) at com.sap.core.connectivity.config.cmd.GetAction.download(GetAction.java:79) at com.sap.core.connectivity.config.cmd.GetAction.run(GetAction.java:52) at com.sap.jpaas.infrastructure.console.CommandManager.run(CommandManager.java:295) at com.sap.jpaas.infrastructure.console.CommandManager.run(CommandManager.java:260) at com.sap.jpaas.infrastructure.console.ConsoleClient.run(ConsoleClient.java:235) at com.sap.jpaas.infrastructure.console.ConsoleClient.main(ConsoleClient.java:85) Caused by: com.sap.core.utils.infrastructure.validation.HostValidationException: javax.net.ssl.SSLPeerUnverifiedException: peer not authenticated at com.sap.core.utils.infrastructure.validation.LandscapeHostValidator.getHttpClient(LandscapeHostValidator.java:304) at com.sap.jpaas.infrastructure.console.command.RemoteCommand.getHttpClient(RemoteCommand.java:95) ... 8 more Caused by: javax.net.ssl.SSLPeerUnverifiedException: peer not authenticated at sun.security.ssl.SSLSessionImpl.getPeerCertificates(SSLSessionImpl.java:397) at org.apache.http.conn.ssl.AbstractVerifier.verify(AbstractVerifier.java:128) at org.apache.http.conn.ssl.SSLSocketFactory.connectSocket(SSLSocketFactory.java:390) at org.apache.http.impl.conn.DefaultClientConnectionOperator.openConnection(DefaultClientConnectionOperator.java:148) at org.apache.http.impl.conn.AbstractPoolEntry.open(AbstractPoolEntry.java:149) at org.apache.http.impl.conn.AbstractPooledConnAdapter.open(AbstractPooledConnAdapter.java:121) at org.apache.http.impl.client.DefaultRequestDirector.tryConnect(DefaultRequestDirector.java:561) at org.apache.http.impl.client.DefaultRequestDirector.execute(DefaultRequestDirector.java:415) at org.apache.http.impl.client.AbstractHttpClient.execute(AbstractHttpClient.java:820) at org.apache.http.impl.client.AbstractHttpClient.execute(AbstractHttpClient.java:776) at com.sap.core.utils.infrastructure.validation.LandscapeHostValidator.getHttpClient(LandscapeHostValidator.java:284) ... 9 more
BR
Beata

Hi Beata,
The CRM scenario is working again. We had to re install the Connector and deploy a new proxy app.
Therefore you would need to download the code from the GitHub repository again. The changes you need to do on your side:
1. Redeploy the new crm__public destination file - the updated destination now points to the new location of the proxy application
2. Update the code of the registration form scripts (form.js and form.spec.xml).
Regards,
Ido

I getting error when connecting my new iPod in my car. Getting error that usb is not recognized.

I getting error when connecting my new iPod in my car. Getting error that usb is not recognized.

Not all car systems are compatible with the iPod touch. Does the documentation/website for the car system say it is compatible with an iPod with iOS 5?

Disk disconnect error when connecting a drive?

Similar Messages

Maybe you are looking for