Disk drive eject itslef

hello can anyone help me in this, whenever i connect my sd card to macbook pro it ejects automatically, i tried many different SD card on my macbook pro, i dont know what to do, please help me.. thank you hope to see your reply

FYI, I chose "eject all" and the world didn't end, so that's good. If anyone can explain to me what I did, though, I'd appreciate it. Many thanks!

Similar Messages

  • Disk Drive ejecting itself

    My Time Machine disk drive has been "ejecting" itself since I installed Snow Leopard. I'm not unplugging it, or turning it off. I'm not touching it.
    I'm getting the following error message:
    "The disk was not ejected properly. If possible, always eject a disk before unplugging it or turning it off."
    My question is why would a disk drive be "ejecting" itself. I've turned off the auto backups, and unselected the drive as the backup disk. It is still "ejecting" itself which leads me to believe the problem isn't with Time Machine but with something else - something connected with Snow Leopard because this wasn't happening five days ago before I installed SL.

    judithnewman wrote:
    My Time Machine disk drive has been "ejecting" itself since I installed Snow Leopard. I'm not unplugging it, or turning it off. I'm not touching it.
    I'm getting the following error message:
    "The disk was not ejected properly. If possible, always eject a disk before unplugging it or turning it off."
    My question is why would a disk drive be "ejecting" itself. I've turned off the auto backups, and unselected the drive as the backup disk. It is still "ejecting" itself which leads me to believe the problem isn't with Time Machine but with something else - something connected with Snow Leopard because this wasn't happening five days ago before I installed SL.
    Does your external drive have its own power source or does it receive its power over the data cable?

  • Ejecting external disk drive--eject drive only or "both partitions"?

    Hello! I have a new Macbook Pro and just used Time Machine for the first time to back up all my data. I am ready to eject the GoFlex external drive, but I received this message:
    “FreeAgent GoFlex Drive” is a partition on a disk that has 2 partitions. Do you want to eject “FreeAgent GoFlex Drive” only, or both partitions?
    Does this mean the GoFlex external drive has 2 partitions? Or does it mean one partition is on the GoFlex drive and the other drive is on my laptop?
    Any advice on which option I should choose?
    Thanks very much!

    FYI, I chose "eject all" and the world didn't end, so that's good. If anyone can explain to me what I did, though, I'd appreciate it. Many thanks!

  • Disk Drive Ejecting When Woken Up From Sleep

    Hello,
    I noticed when my iMac wakes from sleep it sounds like the disc drive is ejecting?
    I just received this iMac after returning another one with a pixel problem and I could swear that it didn't make the same noise when it wakes up from sleep.
    Does anyone know anything about this ?
    Thanks

    They all did it by default but apple put out a firmware update a few weeks ago which stops certain drives doing this when woken up from sleep.

  • Disk drive ejects automatically

    My CD drives is getting ejected automatically since I have refreshed it. Initially it ejects on booting, but problem has been sorted out somehow, but now, it ejects while working.
    I'm using G6-2202 TX with Win8.

    How common is it for the lens to get dusty and not read a particular DVD? I have two new DVD movies that are not even recognized on my PowerBook, and get spit out after a minute of cycling. Every other DVD works fine. I even returned one of the non-recognized DVDs and exchanged it for another of the same title, and guess what, it does not play either.
    I tried these two problem DVDs in my G4 desktop last night, and they both worked just fine in that older drive. Unfortunately, and unrelated, my four year old Quicksilver desktop died overnight after the successful movie screenings.
    Are some newish Region 1 NTSC DVDs different somehow (what is DVD9?)? Or is it most likely a dirty lens needing service, as you suggest?
    Garth

  • My Seagate external 250GB hard drive ejects improperly without command.  I am trying to use Time Machine to backup my macbook via usb cable...  I keep getting the message that the disked ejected improperly...  Any solutions...

    My Seagate external 250GB hard drive ejects improperly without command.  I am trying to use Time Machine to backup my macbook via usb cable...  I keep getting the message that the disked ejected improperly...  Any solutions...

    You are not alone. Thousands have this problem, on various models of Macs. Short answer, it has something to do with the disk going to sleep (possibly?). You can't do anything about it and Apple won't address the problem. Maybe you should buy a time capsule. Just keep giving them money and use their proprietary equipment.
    For a more complete answer, see this thread (all 65+ pages of it with NO SOLUTION IN SIGHT... except for some 3rd party solutions that sometimes work, sometimes don't): Disk Drive ejecting itself

  • I am getting error message "Disk Not Ejected Properly Eject "FreeAgent GoFlex Drive" before disconnecting or turning it-" randomly.

    I'm getting a "Disk Not Ejected Properly  Eject “FreeAgent GoFlex Drive” before disconnecting or turning it…" message at random times.  I have seen other comments about this happening after the iMac wakes from sleep.  However, this is happening to me throughout the day even when I am working on the iMac.
    The iMac is up to date with OS X Version 10.9.  I had recently switched from a 500GB to a 3TB Drive, both are Seagate.  I have never had this issue prior to the switch.
    Has anyone else experienced this issue?
    I verified/repaired in the Utility Disk and a message popped up indicating the GoFlex looks "OK".

    No, I am not on the USB3 interface.  I contacted Seagate and they indicated that there is no known issue with OS X 10.9.  In my case, they are willing to send me a new Drive, since I just received the GoFlex on 12/06. Will post an update when I install the new one.  Hopefully this will solve my issue.
    I suggest you contact Seagate, if you haven't already, directly.  The representatives are very helpful.  Good luck.

  • My iMac is disconnecting all my media hard drives and giving "Disk Not Ejected Properly" message since updating to OSX 10.9

    Ever since I updated to OSX version 10.9 on my iMac, it is disconnecting all of my media hard drives and giving me the message: "Disk Not Ejected Properly." My hard drives are connected to my iMac through a Nitro Professional 8-port Firewire 800 hub/repeater, and a Firewire 800 cable from the Nitro hub connects to the back of my iMac. This configuration has been working fine for over a year. Suddenly, and immediately after performing the update about a week ago, the drives won't stay connected for more than a few seconds before the iMac disconnects from my drives. I've tried restarting and reconnecting many times and the same thing keeps happening.
    I have a new MacBook Pro (one month old) that I've been using temporarily to work with my photos and video on these drives as the drives are able to stay connected to this computer—I put a Thunderbolt adapter onto the Firewire 800 cable to connect to it. Luckily I had not yet updated it to the new operating system and I am afraid to do that. I've had the persistent message that Updates are available for my computer on my MacBook but I will not perform any updates for fear that I will lose access to my media drives. I am a professional photographer, so it's pretty disasterous if I can't access my drives. Please advise me what to do to keep my hard discs connected to my iMac and what to do to keep this from happening with my MacBook.
    Thanks in advance for your knowledge and assistance!

    Hello Roma2001,
    Thank you for the details of the issue you are experiencing with your FireWire hub. 
    I recommend following the steps in the section titled "Top troubleshooting tips" in the following article:
    USB and FireWire Quick Assist
    http://support.apple.com/kb/HT1151
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • External Disk Drive not ejecting

    I have a MacBook Air which doesn't have a disk drive built in so I bought an external one. I put a DVD in it, it all worked perfectly normal, once finishing the DVD I shut down the computer like I would normal but I forgot to eject the disk.  Its never been a problem before but now it wont eject the disk thats in there. It makes sounds that its going to but it doesn't, still plays the disk thats in there as well. Someone please help me fix this problem!

    Props to Kappy.
    Five ways to eject a stuck CD or DVD from the optical drive
    Ejecting the stuck disc can usually be done in one of the following ways:
      1. Restart the computer and after the chime press and hold down the
          left mouse button until the disc ejects.
      2. Press the Eject button on your keyboard.
      3. Click on the Eject button in the menubar.
      4. Press COMMAND-E.
      5. If none of the above work try this: Open the Terminal application in
          your Utilities folder. At the prompt enter or paste the following:
            /usr/bin/drutil eject
    If this fails then try this:
    Boot the computer into Single-user Mode. At the prompt enter the same command as used above. To restart the computer enter "reboot" at the prompt without quotes.

  • I have an iMac model 4,1 running OSX 10.6.8.   The CD/DVD drive went bad and I have replaced it.  However I can not get disks to eject.   I have asked about this before and tried all all the suggestions I have received but I can not eject.

    I have an iMac model 4,1 running OSX 10.6.8.   The CD/DVD drive went bad and I have replaced it.  However I can not get disks to eject.   I have asked about this before and tried all all the suggestions I have received but I can not eject.  
    Yesterday I opened up the iMac and reinstalled the drive to make sure that it was not an alignment problem.   I still can not eject.   When I try to eject the drive makes noises like it is ejecting but the disk does not come out.
    How do I solve this problem?

    Hi again Hal
    Link to your other thread > The slot loading CD/DVD drive in my...: Apple Support Communities
    You have also tried resetting the PRAM as I suggestion in your other thread...?
    See resetting the PRAM > About NVRAM and PRAM
    1. Shut down the computer.
    2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    3. Turn on the computer.
    4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    6. Release the keys.

  • How do you eject a cd stuck in your disk drive??

    how do you eject a cd stuck in your disk drive??

    Force eject a stuck cd/dvd
    First try the normal methods to remove the disc. Drag its icon to the Trash can in the Dock or select 'Eject' from the File menu.
    If you are running a virtual machine, e.g. VMFusion, ensure that the CD is disconnected from the virtual machine. This will sometimes allow the CD to now show up in Mac OS X.
    Shut down the computer and start up whilst holding down the mouse button. This may take some time, but keep your finger on the mouse button right up until the disc comes out or the log-in screen has appeared.
    If you have Toast Titanium installed on your computer, choose EJECT DISC from the menubar.
    Sometimes you can successfully use the eject disc button in iTunes even if the disc is not visible to the Finder
    Open Disc utility and choose the disc you wish to eject in the left-hand pane, then click on the Eject button.
    Some Macintoshes have a paperclip hole that you can insert a straightened paperclip into, manually triggering the eject mechanism.
    Open Terminal and type "drutil tray eject" to eject the disc/tray, and "drutil tray close" to close the tray.
    If your computer has an eject button on the keyboard, restart the computer holding down the Option key. When the startup disk selection screen appears, let go of the option key and press the keyboard's eject button.
    Source: http://guides.macrumors.com/Force_Eject_a_Stuck_CD_or_DVD

  • I have a macbook.  Whenever I put a disk into the disk drives it keeps ejecting the disk after 2 secs.  How can I fix this?  Thanks

    have a macbook.  Whenever I put a disk into the disk drives it keeps ejecting the disk after 2 secs.  How can I fix this?  Thanks

    I am also having a similar issue. I used Adobe Lightroom and my whole display goes black. Even my laptop screen and the lights on the keyboard go black. I can still hear the fan running, so I assume it is just the display. This is my first Mac and I have had nothing but issues. I think I am going back to Windows after this.

  • Problems re-installing PSE10 using disks. Disk drive will not eject. [was: Question]

    A virus fried my PC and I am re-installing Photoshop Elements 10.  When prompted to install Disk 2 the disk drive will not eject.  I have to uninstall Disk 1 before it will eject.

    There is no question in your posting.

  • I can't eject a DVD from my disk drive

    I can't eject a DVD from my disk drive nor can I play the DVD?  It freezes up my cpu.  Any suggestions?

    macnewbie39 wrote:
    I can't eject a DVD from my disk drive nor can I play the DVD?  It freezes up my cpu.  Any suggestions?
    Open Terminal and type or paste:  drutil eject and press enter, quit.
    Might just be a bad DVD or it could contain a different form of copy protection that the Mac doesn't understand yet. Use a older DVD's and try them out, if you still have the same problem then you can try as much as you can of the fix list here or take your machine in for service.
    Step by Step to fix your Mac

  • Disk drive continues to eject digital dvd copy.

    I recently puchased blu-ray with digital copy combo.  I tried to load digital copy to redeem but disk drive continues to eject digital dvd without reading it and no dialogue box.  How do I fix to redeem movie?

    If disk drive rejects ONLY that disk, then you have a compatibility issue with that disk or that generation of disks. What about other optical disks, CDs or DVDs? Do they behave OK? If a superdrive, test recording a CD or DVD using a rw disk. If all is OK, the answer is simple: that very disk is not compatible with that generation of optical drives.
    that generation of optical drives cannot—for sure—run blu-ray disks.

Maybe you are looking for

  • Dynamic Table Creation using RTTS - Question on Issue

    I am using the RTTS services to dynamically create a table.  However, when I attempt to use the get_components method it does not return all the components for all tables that I am working with. Cases and End Results 1) Created structure in data dict

  • To find the Calling Program of an sap script

    Hi All, Can any body please let me know how to find the calling program ( main program ) of an SAP Script Form. Thanks and Regards, Rupesh

  • Audio only ... No Video

    I have Flash Player 9,0,47,0 When I try to play the animated video on http://www.winter2010.com/Default.htm ... Meet the Vancouver 2010 Mascots! I get audio only, no video. What is blocking the video??? When I first installed Flash Player 9 to view t

  • Vehicle Consumption Analysis question?

    I'm working with the Vehicle Consumption analysis objects in SAP BW (0PM_C12 and 0PM_DS08) and I've got a question regarding the retrieval of Operation hours. The 0PM_FLEET datasource retrieves Distance, Fuel, and Operating Hours from SAP ecc and the

  • TREX preprocessing failed, HTTP Status Code 401

    Hello everybody! I'm using SAP NetWeaver 7.0 (2004s), TREX 7.0 on Win2003 Server. I'm trying to index files, but it doesn't work for files bigger than 10KB. I know that for these documents > 10KB only the URI is transmitted to TREX. So it seems the p