Disk Drive Ejecting When Woken Up From Sleep
Hello,
I noticed when my iMac wakes from sleep it sounds like the disc drive is ejecting?
I just received this iMac after returning another one with a pixel problem and I could swear that it didn't make the same noise when it wakes up from sleep.
Does anyone know anything about this ?
Thanks
They all did it by default but apple put out a firmware update a few weeks ago which stops certain drives doing this when woken up from sleep.
Similar Messages
-
Ext. hard drive ejects when MBP wakes from sleep
When I wake my MBP from sleep (by clicking the space bar), the ext. firewire hard (MyBook 500 GB) drive ejects leaving the msg. that it was not properly ejected and data might have been lost, etc. Is there a better way to wake it that won't cause the ext. hard drive to eject?
ThanksHi Logan,
You should post over in the Unibody forums, where you'll find many more people who own the same machine as you do (this area deals with the Original MBP). -
External hard drives ejecting after iMac wakes from sleep.
External hard drive keeps ejecting after iMac wakes from sleep. TM does not recognise, so have to unplug then re plug in Ext HD, only then TM will perform a back up. Not seamless backups. Help to resolve would be grand
Ive got the same problem with a Western Digital 500GB My Book Pro on my iMac Ive tried it on a few other machines and I think its happened on them, I say think because it was only when it had happened a couple of time that I started to take notice of circumstances etc and ive only had the drive a week, downloaded what may be a more uptodate "My Button manager" from the WD site still happened but Ive got this idea that it didnt happen on one machine which may not have had the MyButton thing on at that time, have you solved it yet I am using USB at the moment.
20" iMac 2.13Ghz Mac OS X (10.4.8) -
My Macbook Pro Retina is having kernel panics when woken up from sleep mode
I want to say this started when I began hooking up my laptop to an old 23" monitor from 2005 (aluminum matte screen version). Here's the error message I get...
Interval Since Last Panic Report: 7280 sec
Panics Since Last Report: 5
Anonymous UUID: C1C6E455-6ED8-2511-735A-54F896291CDF
Wed Feb 13 08:06:23 2013
panic(cpu 2 caller 0xffffff802aeb7e75): Kernel trap at 0xffffff7fab3b9816, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x0000000000000000, CR3: 0x000000002d97b000, CR4: 0x00000000001606e0
RAX: 0xffffff804020a100, RBX: 0xffffff80fe635000, RCX: 0x0000000000000002, RDX: 0x0000000000000004
RSP: 0xffffff811c6abdc0, RBP: 0xffffff811c6abde0, RSI: 0x0000000000000002, RDI: 0x0000000000000000
R8: 0xffffff8040209000, R9: 0x00000000000003ff, R10: 0xffffffffffffffff, R11: 0x00000000ffffffff
R12: 0xffffff80401db500, R13: 0x0000000000000002, R14: 0x0000000000000004, R15: 0x0000000000000002
RFL: 0x0000000000010246, RIP: 0xffffff7fab3b9816, CS: 0x0000000000000008, SS: 0x0000000000000000
Fault CR2: 0x0000000000000000, Error code: 0x0000000000000000, Fault CPU: 0x2
Backtrace (CPU 2), Frame : Return Address
0xffffff811c6aba60 : 0xffffff802ae1d626
0xffffff811c6abad0 : 0xffffff802aeb7e75
0xffffff811c6abca0 : 0xffffff802aecd3bd
0xffffff811c6abcc0 : 0xffffff7fab3b9816
0xffffff811c6abde0 : 0xffffff802b2388cc
0xffffff811c6abe30 : 0xffffff802b2352e1
0xffffff811c6abe80 : 0xffffff802b23f804
0xffffff811c6abec0 : 0xffffff802b234b8b
0xffffff811c6abef0 : 0xffffff802b23f4fd
0xffffff811c6abf30 : 0xffffff802b2451ea
0xffffff811c6abf80 : 0xffffff802b245319
0xffffff811c6abfb0 : 0xffffff802aeb2957
Kernel Extensions in backtrace:
com.apple.iokit.IOUSBFamily(5.5)[DF1A9F7E-C593-313D-8EBB-5DA72F03C087]@0xffffff 7fab399000->0xffffff7fab3f4fff
dependency: com.apple.iokit.IOPCIFamily(2.7.3)[7EECA562-F708-37FF-9757-CA9C98939903]@0xffff ff7fab370000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
12C3103
Kernel version:
Darwin Kernel Version 12.2.1: Thu Oct 18 12:13:47 PDT 2012; root:xnu-2050.20.9~1/RELEASE_X86_64
Kernel UUID: 3F93B852-872F-3DF0-BCF8-46D48024C422
Kernel slide: 0x000000002ac00000
Kernel text base: 0xffffff802ae00000
System model name: MacBookPro10,1 (Mac-C3EC7CD22292981F)
System uptime in nanoseconds: 1925190311437
last loaded kext at 244150815221: com.apple.filesystems.msdosfs 1.8 (addr 0xffffff7fad2c6000, size 65536)
last unloaded kext at 304279626761: com.apple.filesystems.msdosfs 1.8 (addr 0xffffff7fad2c6000, size 57344)
loaded kexts:
org.virtualbox.kext.VBoxNetAdp 4.2.6
org.virtualbox.kext.VBoxNetFlt 4.2.6
org.virtualbox.kext.VBoxUSB 4.2.6
org.virtualbox.kext.VBoxDrv 4.2.6
com.silex.driver.sxuptp 1.10.0
at.obdev.nke.LittleSnitch 3894
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AudioAUUC 1.60
com.apple.iokit.IOBluetoothSerialManager 4.1.2f9
com.apple.filesystems.autofs 3.0
com.apple.driver.AGPM 100.12.81
com.apple.driver.ApplePlatformEnabler 2.0.6d1
com.apple.driver.X86PlatformShim 1.0.0
com.apple.driver.AppleMikeyHIDDriver 122
com.apple.driver.AppleHDA 2.3.5fc12
com.apple.driver.AppleUpstreamUserClient 3.5.10
com.apple.GeForce 8.0.6
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.driver.AppleMikeyDriver 2.3.5fc12
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport 4.1.2f9
com.apple.driver.AppleIntelHD4000Graphics 8.0.6
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.AppleSMCLMU 2.0.3d0
com.apple.driver.AppleMCCSControl 1.1.11
com.apple.driver.AppleIntelFramebufferCapri 8.0.6
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.AppleMuxControl 3.2.13
com.apple.driver.ApplePolicyControl 3.2.13
com.apple.driver.AppleUSBTCButtons 237.1
com.apple.driver.AppleUSBTCKeyboard 237.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 34
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.3.1
com.apple.driver.AppleUSBHub 5.5.0
com.apple.driver.AppleSDXC 1.4.0
com.apple.driver.AirPort.Brcm4331 612.20.15
com.apple.driver.AppleAHCIPort 2.5.1
com.apple.driver.AppleUSBEHCI 5.5.0
com.apple.driver.AppleUSBXHCI 1.5.1
com.apple.driver.AppleEFINVRAM 1.7
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleACPIButtons 1.7
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.7
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 196.0.0
com.apple.nke.applicationfirewall 4.0.39
com.apple.security.quarantine 2
com.apple.driver.AppleIntelCPUPowerManagement 196.0.0
com.apple.driver.AppleBluetoothHIDKeyboard 170.2
com.apple.driver.AppleHIDKeyboard 170.2
com.apple.iokit.IOSerialFamily 10.0.6
com.apple.kext.triggers 1.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.5.5
com.apple.driver.DspFuncLib 2.3.5fc12
com.apple.iokit.IOAudioFamily 1.8.9fc11
com.apple.kext.OSvKernDSPLib 1.6
com.apple.nvidia.nvGK100hal 8.0.6
com.apple.NVDAResman 8.0.6
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport 4.1.2f9
com.apple.iokit.IOSurface 86.0.3
com.apple.driver.X86PlatformPlugin 1.0.0
com.apple.driver.AppleHDAController 2.3.5fc12
com.apple.iokit.IOHDAFamily 2.3.5fc12
com.apple.driver.AppleSMBusController 1.0.11d0
com.apple.driver.AppleSMC 3.1.4d2
com.apple.driver.AppleSMBusPCI 1.0.11d0
com.apple.driver.IOPlatformPluginFamily 5.3.0d47
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.AppleGraphicsControl 3.2.13
com.apple.iokit.IONDRVSupport 2.3.6
com.apple.iokit.IOGraphicsFamily 2.3.6
com.apple.driver.AppleThunderboltDPInAdapter 1.8.9
com.apple.driver.AppleThunderboltDPAdapterFamily 1.8.9
com.apple.driver.AppleThunderboltPCIDownAdapter 1.2.6
com.apple.driver.AppleUSBMultitouch 237.3
com.apple.driver.IOBluetoothHIDDriver 4.1.2f9
com.apple.iokit.IOBluetoothFamily 4.1.2f9
com.apple.iokit.IOUSBHIDDriver 5.2.5
com.apple.driver.AppleUSBMergeNub 5.5.0
com.apple.driver.AppleUSBComposite 5.2.5
com.apple.driver.AppleThunderboltNHI 1.6.3
com.apple.iokit.IOThunderboltFamily 2.1.8
com.apple.iokit.IO80211Family 510.4
com.apple.iokit.IONetworkingFamily 3.0
com.apple.iokit.IOUSBUserClient 5.5.0
com.apple.iokit.IOAHCIFamily 2.3.1
com.apple.iokit.IOUSBFamily 5.5.0
com.apple.driver.AppleEFIRuntime 1.7
com.apple.iokit.IOHIDFamily 1.8.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 220
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 344
com.apple.iokit.IOStorageFamily 1.8
com.apple.driver.AppleKeyStore 28.21
com.apple.driver.AppleACPIPlatform 1.7
com.apple.iokit.IOPCIFamily 2.7.3
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
Model: MacBookPro10,1, BootROM MBP101.00EE.B02, 4 processors, Intel Core i7, 2.6 GHz, 8 GB, SMC 2.3f32
Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-In, 512 MB
Graphics: NVIDIA GeForce GT 650M, NVIDIA GeForce GT 650M, PCIe, 1024 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54333531533642465238432D50422020
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54333531533642465238432D50422020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xEF), Broadcom BCM43xx 1.0 (5.106.98.100.15)
Bluetooth: Version 4.1.2f9 11046, 2 service, 18 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en0
Serial ATA Device: APPLE SSD SD512E, 500.28 GB
USB Device: hub_device, 0x8087 (Intel Corporation), 0x0024, 0x1a100000 / 2
USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8510, 0x1a110000 / 3
USB Device: hub_device, 0x8087 (Intel Corporation), 0x0024, 0x1d100000 / 2
USB Device: hub_device, 0x0424 (SMSC), 0x2512, 0x1d180000 / 3
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0262, 0x1d182000 / 5
USB Device: BRCM20702 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x1d181000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8286, 0x1d181300 / 6
Thanks for the help in advance!Any or all of the following third-party system modifications may be contributing to your problem:
VirtualBox
SX-Virtual Link
Little Snitch
If the panic is recurrent, I suggest you uninstall them, one at a time, according to the developers' instructions, to see whether you can identify which one is at fault. A conflict between modifications may be involved. Reboot and test after each uninstallation.
Back up all data before making any changes. -
LaCie 6TB drive ejects when Air sleeps: I use two 6TB LaCie drives - home and office with my Air, which travels with me between the locations. Only have a problem with one that inappropriately ejects when the Air sleeps (and only sometimes). Is there a fix? I've read others who believe that the problem is with the operating system (I'm using 10.9.2). But my problem suggests that it's with one of the LaCie's. Any suggestions about how to fix?
Lacie doesnt make HD, thats a Seagate inside the box.
Is there a fix?
Yes, get a 4TB max HD, 6TB drives are both new and have known issues, ...in fact so do most all 4TB drives.
my problem suggests that it's with one of the LaCie's
You mean Seagate
Large external hard drives are great! Large external hard drives are horrible
It is a common premise that people are overjoyed at the dropping prices per terabyte on external hard drives, and the first thing that enters most peoples minds is "great, I can put all my stuff on one drive,... all of it!" However considerations need to be made in creating a giant single choke point for not mere data loss, but seriously large data loss. If there is at the very least yet another redundant copy, this is fine, otherwise do not consider it whatsoever. Some 3TB and 4TB drives of all mfg. have, at the time of this writing, reliability concerns currently and best recommendation is staying at 2TB drives or less.
Advantages and disadvantages of larger 3TB and 4TB external drives must be weighed -
MacBook Pro with Yosemite freezes on the login window after being woken up from sleep.
Hi,
my early 2011 MacBook Pro freezes when it's woken up from sleep mode. I have to force power down the macbook and do a fresh boot. I recently installed a SSD and did a fresh yosemite install from a USB thumb drive.
EtreCeck:
EtreCheck version: 2.0.10 (97)
Bericht vom 1. November 2014 22:50:42 MEZ
Hardware-Informationen: ℹ️
MacBook Pro (13 Zoll, Anfang 2011) (Verifiziert)
MacBook Pro - Modell: MacBookPro8,1
1 2.7 GHz Intel Core i7 CPU: 2-core
8 GB RAM Nachrüstbar
BANK 0/DIMM0
4 GB DDR3 1600 MHz ok
BANK 1/DIMM0
4 GB DDR3 1600 MHz ok
Bluetooth: Älter - Handoff/Airdrop2 nicht unterstützt
Wireless: en1: 802.11 a/b/g/n
Video Informationen: ℹ️
Intel HD Graphics 3000 - VRAM: 512 MB
Color LCD 1280 x 800
Acer H236HL spdisplays_1080p
System-Software: ℹ️
OS X 10.10 (14A389) - Laufzeit: 0:14:59
Festplatteninformationen: ℹ️
Samsung SSD 850 PRO 256GB disk0 : (256,06 GB)
S.M.A.R.T. Status: Verifiziert
EFI (disk0s1) <nicht sichtbar> : 210 MB
Recovery HD (disk0s3) <nicht sichtbar> [Erholung] : 650 MB
SSD (disk2) / [Startup] : 254.83 GB (184.38 GB frei)
Core Storage: disk0s2 255.20 GB Online
Hitachi HTS547550A9E384 disk1 : (500,11 GB)
S.M.A.R.T. Status: Verifiziert
EFI (disk1s1) <nicht sichtbar> : 210 MB
Recovery HD (disk1s3) <nicht sichtbar> [Erholung] : 650 MB
HDD (disk3) /Volumes/HDD : 498.88 GB (334.08 GB frei)
Core Storage: disk1s2 499.25 GB Online
USB-Informationen: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Microsoft Wired Keyboard 600
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Thunderbolt Informationen: ℹ️
Apple Inc. thunderbolt_bus
Konfigurationsdateien: ℹ️
/etc/hosts - Graf: 31
Gatekeeper: ℹ️
Mac App Store und verifizierte Entwickler
Kernel-Erweiterungen: ℹ️
/Library/Extensions
[nicht geladen] com.caiaq.driver.NIUSBHardwareDriver (2.6.0 - SDK 10.8) Unterstützt
[nicht geladen] com.caiaq.driver.NIUSBMaschineControllerDriver (2.6.0 - SDK 10.8) Unterstützt
Start-Agents: ℹ️
[nicht geladen] com.adobe.AAM.Updater-1.0.plist Unterstützt
[geladen] com.epson.esua.launcher.plist Unterstützt
[ungültig?] com.teamviewer.teamviewer.plist Unterstützt
[ungültig?] com.teamviewer.teamviewer_desktop.plist Unterstützt
Start-Daemons: ℹ️
[geladen] com.adobe.fpsaud.plist Unterstützt
[ungültig?] com.adobe.SwitchBoard.plist Unterstützt
[geladen] net.freemacsoft.LiteIcon.LIHelperTool.plist Unterstützt
Benutzer Start-Agents: ℹ️
[geladen] com.adobe.AAM.Updater-1.0.plist Unterstützt
Anmeldeobjekte: ℹ️
Flux Programm (/Applications/Flux.app)
iTunesHelper Programm (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Alfred 2 UNKNOWN (missing value)
Internet Plug-Ins: ℹ️
AdobeExManDetect: Version: AdobeExManDetect 1.1.0.0 - SDK 10.7 Unterstützt
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Unterstützt
Default Browser: Version: 600 - SDK 10.10
AdobePDFViewerNPAPI: Version: 10.1.12 Unterstützt
AdobePDFViewer: Version: 10.1.12 Unterstützt
Flash Player: Version: 15.0.0.189 - SDK 10.6 Unterstützt
QuickTime Plugin: Version: 7.7.3
JavaAppletPlugin: Version: 15.0.0 - SDK 10.10 Version prüfen
Safari Extensions: ℹ️
AdBlock
Einstellungskarten von Drittanbietern: ℹ️
Flash Player Unterstützt
Native Instruments USB Audio Unterstützt
Time Machine: ℹ️
Überspringen Systemdateien: NEIN
Mobil Sicherungskopie: AUS
Automatische Sicherungskopie: NEIN - Automatische Sicherungskopie ausgeschaltet
Gesicherte Platten:
HDD: Festplattengröße: 498.88 GB Disk verwendet: 164.80 GB
Sicherungsziele:
TimeMachine [Network]
Gesamt Größe: 3 TB
Gesamtzahl der Sicherungskopie: 17
Älteste Sicherungskopie: 2014-08-03 17:35:39 +0000
Letzten Sicherung: 2014-10-24 11:15:03 +0000
Größe der Sicherungsplatte: Hervorragend
Größe der Sicherungsplatte 3 TB > (Disk Größe 498.88 GB X 3)
Top Prozesse von der CPU: ℹ️
10% mds
8% WindowServer
1% hidd
1% Safari
0% fontd
Top Prozesse vom Speicher: ℹ️
241 MB Safari
189 MB mds_stores
137 MB com.apple.WebKit.WebContent
103 MB softwareupdated
94 MB Console
Informationen zum virtuellen Speicher: ℹ️
4.35 GB Freier RAM
2.36 GB Aktive RAM
478 MB Inaktive RAM
1.40 GB Wired RAM
1.05 GB Seite-ins
0 B Seite-outs
Here is the console log from a recent freeze:
01.11.14 21:03:08,000 kernel[0]: sleep
01.11.14 21:03:08,000 kernel[0]: Wake reason: EHC2
01.11.14 22:35:05,000 kernel[0]: AirPort_Brcm43xx::powerChange: System Wake - Full Wake/ Dark Wake / Maintenance wake
01.11.14 22:35:05,000 kernel[0]: Previous sleep cause: 5
01.11.14 22:35:05,000 kernel[0]: The USB device HubDevice (Port 1 of Hub at 0xfa000000) may have caused a wake by issuing a remote wakeup (2)
01.11.14 22:35:05,000 kernel[0]: AppleThunderboltGenericHAL::earlyWake - complete - took 1 milliseconds
01.11.14 22:35:05,000 kernel[0]: The USB device BRCM2070 Hub (Port 1 of Hub at 0xfa100000) may have caused a wake by issuing a remote wakeup (3)
01.11.14 22:35:05,000 kernel[0]: TBT W (1): 0 [x]
01.11.14 22:35:05,000 kernel[0]: AppleUSBMultitouchDriver::validateChecksum - 512-byte packet checksum is incorrect (expected 0x47b, checksum bytes were 0xdead)
01.11.14 22:35:05,000 kernel[0]: wlEvent: en1 en1 Link DOWN virtIf = 0
01.11.14 22:35:05,000 kernel[0]: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
01.11.14 22:35:05,000 kernel[0]: en1::IO80211Interface::postMessage bssid changed
01.11.14 22:35:05,000 kernel[0]: en1: 802.11d country code set to 'X3'.
01.11.14 22:35:05,000 kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 12 13 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140
01.11.14 22:35:05,140 sharingd[250]: 22:35:05.140 : SDStatusMonitor::kStatusWirelessPowerChanged
01.11.14 22:35:05,147 discoveryd[48]: Basic DNSResolver UDNS Send(): UDP Sendto() failed to DNSNameServer 8.8.8.8 Port 53 errno 50, fd 46, ErrLogCount 1 ResolverIntf:0
01.11.14 22:35:05,148 discoveryd[48]: Basic DNSResolver UDNS Send(): UDP Sendto() failed to DNSNameServer 8.8.8.8 Port 53 errno 50, fd 46, ErrLogCount 2 ResolverIntf:0
01.11.14 22:35:05,148 discoveryd[48]: Basic DNSResolver UDNS Send(): UDP Sendto() failed to DNSNameServer 8.8.8.8 Port 53 errno 50, fd 46, ErrLogCount 3 ResolverIntf:0
01.11.14 22:35:05,148 discoveryd[48]: Basic DNSResolver UDNS Send(): UDP Sendto() failed to DNSNameServer 8.8.8.8 Port 53 errno 50, fd 46, ErrLogCount 4 ResolverIntf:0
01.11.14 22:35:05,149 discoveryd[48]: Basic DNSResolver UDNS Send(): UDP Sendto() failed to DNSNameServer 8.8.8.8 Port 53 errno 50, fd 46, ErrLogCount 5 ResolverIntf:0
01.11.14 22:35:05,153 UserEventAgent[16]: Captive: CNPluginHandler en1: Inactive
01.11.14 22:35:05,154 configd[25]: network changed: v4(en0:192.168.178.30, en1-:192.168.178.22) DNS* Proxy SMB
01.11.14 22:35:05,156 discoveryd[48]: Basic Warn DD_Warn: Corrupt NSEC RDATA size
01.11.14 22:35:05,154 networkd[156]: +[NETLedBelly stopFastFail] Clearing ledbelly failure cache
01.11.14 22:35:05,000 kernel[0]: The USB device Bluetooth USB Host Controller (Port 3 of Hub at 0xfa110000) may have caused a wake by issuing a remote wakeup (3)
01.11.14 22:35:05,000 kernel[0]: full wake promotion (reason 1) 241 ms
01.11.14 22:35:05,214 watchdogd[200]: [watchdog_daemon] @( pm_callback) - ref=0x0 msg_type=0xe0000320 msg=0x0
01.11.14 22:35:05,234 hidd[68]: MultitouchHID: device bootloaded
01.11.14 22:35:05,446 discoveryd[48]: Basic Bonjour,Warn Warning: IPv6 listener multicast send failed en1, 49
01.11.14 22:35:05,560 sharingd[250]: 22:35:05.559 : SDStatusMonitor::kStatusWirelessPowerChanged
01.11.14 22:35:05,588 sharingd[250]: 22:35:05.588 : SDStatusMonitor::kStatusWirelessPowerChanged
01.11.14 22:35:05,611 sandboxd[283]: ([29]) airportd(29) deny file-read-metadata /Library/Preferences/com.apple.security-common.plist
01.11.14 22:35:05,620 sandboxd[283]: ([29]) airportd(29) deny file-read-data /Library/Preferences/com.apple.security-common.plist
01.11.14 22:35:05,000 kernel[0]: MacAuthEvent en1 Auth result for: 58:6d:8f:ae:80:e9 MAC AUTH succeeded
01.11.14 22:35:05,000 kernel[0]: wlEvent: en1 en1 Link UP virtIf = 0
01.11.14 22:35:05,000 kernel[0]: AirPort: Link Up on en1
01.11.14 22:35:05,000 kernel[0]: en1: BSSID changed to 58:6d:8f:ae:80:e9
01.11.14 22:35:05,000 kernel[0]: en1::IO80211Interface::postMessage bssid changed
01.11.14 22:35:05,000 kernel[0]: AirPort: RSN handshake complete on en1
01.11.14 22:35:06,666 WindowServer[137]: CGXDisplayDidWakeNotification [3660674748260]: posting kCGSDisplayDidWake
01.11.14 22:35:06,667 WindowServer[137]: handle_will_sleep_auth_and_shield_windows: Reordering authw 0x7f8e4d73e0e0(2004) (lock state: 3)
01.11.14 22:35:06,667 WindowServer[137]: handle_will_sleep_auth_and_shield_windows: err 0x0
01.11.14 22:35:06,926 networkd[156]: +[NETLedBelly stopFastFail] Clearing ledbelly failure cache
01.11.14 22:35:06,927 configd[25]: network changed: v4(en0:192.168.178.30) DNS* Proxy SMB
01.11.14 22:35:06,928 UserEventAgent[16]: Captive: [CNInfoNetworkActive:1709] en1: SSID 'Desperate Housewifi' making interface primary (cache indicates network not captive)
01.11.14 22:35:06,929 UserEventAgent[16]: Captive: CNPluginHandler en1: Evaluating
01.11.14 22:35:06,934 UserEventAgent[16]: Captive: en1: Not probing 'Desperate Housewifi' (cache indicates not captive)
01.11.14 22:35:06,935 UserEventAgent[16]: Captive: CNPluginHandler en1: Authenticated
01.11.14 22:35:06,936 configd[25]: network changed: v4(en0:192.168.178.30, en1!:192.168.178.22) DNS Proxy SMB
01.11.14 22:35:06,943 networkd[156]: +[NETLedBelly stopFastFail] Clearing ledbelly failure cache
01.11.14 22:35:06,000 kernel[0]: en1: BSSID changed to 58:6d:8f:ae:80:e9
01.11.14 22:35:06,954 sharingd[250]: 22:35:06.953 : SDStatusMonitor::kStatusWirelessPowerChanged
01.11.14 22:35:08,023 discoveryd[48]: Basic Bonjour Failed to delete registration recordId=21 error=4
01.11.14 22:35:12,885 discoveryd[48]: Basic DNSResolver UDNSServer:: PowerState is Wakeup
01.11.14 22:35:14,000 kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link up on en0, 1-Gigabit, Full-duplex, Symmetric flow-control, Debug [796d,2301,0de1,0300,cde1,3c00]
01.11.14 22:35:14,772 ntpd[749]: wake time set +0.196458 s
01.11.14 22:35:14,850 com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
01.11.14 22:35:14,886 com.apple.iCloudHelper[799]: objc[799]: Class FALogging is implemented in both /System/Library/PrivateFrameworks/FamilyCircle.framework/Versions/A/FamilyCircle and /System/Library/PrivateFrameworks/FamilyNotification.framework/Versions/A/FamilyNotification. One of the two will be used. Which one is undefined.
01.11.14 22:35:14,898 com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
01.11.14 22:35:15,561 CalendarAgent[216]: [com.apple.calendar.store.log.caldav.coredav] [Refusing to parse response to PROPPATCH because of content-type: [text/html; charset=UTF-8].]
01.11.14 22:35:15,616 CalendarAgent[216]: [com.apple.calendar.store.log.caldav.coredav] [Refusing to parse response to PROPPATCH because of content-type: [text/html; charset=UTF-8].]
01.11.14 22:35:16,181 CalendarAgent[216]: [com.apple.calendar.store.log.caldav.coredav] [Refusing to parse response to PROPPATCH because of content-type: [text/plain; charset="utf-8"].]
01.11.14 22:35:16,334 CalendarAgent[216]: [com.apple.calendar.store.log.caldav.coredav] [Refusing to parse response to PROPPATCH because of content-type: [text/plain; charset="utf-8"].]
01.11.14 22:35:20,013 com.apple.iCloudHelper[799]: AOSKit WARN: APS timeout encountered (cxn initialization)
01.11.14 22:35:20,013 com.apple.iCloudHelper[799]: AOSKit WARN: Failed to get response from APSConnection's initialization method(s)
01.11.14 22:35:26,000 kernel[0]: en1: 802.11d country code set to 'DE'.
01.11.14 22:35:26,000 kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 12 13 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140
01.11.14 22:35:26,363 AddressBookSourceSync[797]: Stream 0x7ff1e3628fb0 is sending an event before being opened
01.11.14 22:35:26,419 com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
01.11.14 22:35:31,000 kernel[0]: MacAuthEvent en1 Auth result for: 58:6d:8f:ae:80:e9 MAC AUTH succeeded
01.11.14 22:35:31,000 kernel[0]: wlEvent: en1 en1 Link UP virtIf = 0
01.11.14 22:35:31,000 kernel[0]: AirPort: RSN handshake complete on en1
01.11.14 22:35:31,000 kernel[0]: wl0: Roamed or switched channel, reason #8, bssid 58:6d:8f:ae:80:e9
01.11.14 22:35:31,000 kernel[0]: en1: BSSID changed to 58:6d:8f:ae:80:e9
01.11.14 22:35:31,000 kernel[0]: en1::IO80211Interface::postMessage bssid changedCount me in, I have the same issue, and from what I read here, it looks like a Yosemite/SSD related issue ?
I'm not 100% sure if it started when I put a SSD in my old iMac 2009 (as a fusion drive) or if that's after that when I upgraded to Yosemite...
I did disable auto poweroff like suggested in another thread : Mac freeze during the night sleep.
sudo pmset -a autopoweroff 0
We'll see if it helps.
It happens toughly a couple of times a week. -
How to access a USB disk drive connected to Airport Extreme from a Windows 7 PC?
How can I access a USB disk drive connected to Airport Extreme from a Windows 7 PC?
...Called it a roaming network. Wireless mode is create a wireless network. I have checked allow this network to be extended. Probably need to uncheck that?
Yes, that option should be deselected as it only pertains to when both routers are interconnected by wireless. Since you have a roaming network, they of course, would be interconnected by Ethernet.
The other important settings for a roaming network are:
Each router must have a unique station name. For the AirPort, this would be called its Base Station Name. I believe the default station name for Linksys routers is: linksys
Each router must broadcast a wireless network with an identical Network Name. For the Linksys, Network Name is the same as its SSID.
Each router wireless network must use the same Wireless Security type and password. The Linksys WRT-54G is capable of up to WPA2 Personal. If you have it set to this level of security, the AirPort should be at the same setting.
Make sure that each router is not on the same Radio Channel for the 2.4 GHz radio. In the US, there are basically only three non-overlapping channels: 1, 6, or 11. Set each so that they don't use the same channel but use of those three choices. -
My external hard drive ejects when copying data. It works on windows and ubuntu. Are there any fixes?
mine do the same thing... its one of the bugs from the 10.6.8 update
-
When Cpu awakes from Sleep mode, sound doesn't w
I am running Vista Ultimate 32bit and when awaking cpu from Sleep mode, seems like sound driver doesn't load. I was haveing the Blue screen but fixed that with updated video driver. I am running latest sound drivers and Vista is up to date. Is there a "hot fix"?Here are my specs... Q6600 G0Evga 680i A bios p3Evga 8800 Ultra 69.28W.D. 750gb sata2xGb Ocz 9200X-Fi FatalityCorsair 620hx psuAntec p82Logitech mx5000 keyboard&mouseLogitech z5500Samsung 242mp @ 920x200 60Hz?
Hello hmnshgrwl,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/ht3964
The System Management Controller (SMC) is responsible for many low-level functions on Intel-based Macs.
Best of luck,
Mario -
High power comsumptio​n and wrong setting when waking up from sleep
See here for some more information: http://forums.lenovo.com/t5/Windows-7-RTM-Discussion/High-Power-Consumption-with-Windows-7/td-p/1668...
Settings: T400, integrated GPU,"maximum battery live" power sheme, brightness level 3, wlan on. Newest switchable graphics driver, power manager and power management drivers installed, SU4 didn't find newer drivers.
Power consumption is between 12-16W most of the time, whereas it was close to 10W on XP, from what i heard from a friend, i installed win7 on my machine right after i bought the thinkpad.
When waking up from sleep( i think hibernation as well) power consumption is abnormal, because both GPUs are activated. You have to switch to to the dedicated and back to the integrated via power manager to deactivate the ATI, which is very annoying.
Is lenovo working on these issues or are there any workaroungs already?I've got similar problems on a T400 with hybrid graphics running Windows 7 x64 Professional, upgraded from Vista x64 Professional. I've upgraded everything to the latest (driver, bios, etc etc) using System Update.
When I boot up from cold, and switch to using batteries, the power consumption is around 8w. Very good.
Then I suspend, and resume from suspend, and the power consumption shoots up to like 20w. Horrible.
Then I manually switch to "High performance" and then back to "Energy saving", the power consumption comes back down, but to >9w, which is like 13% above the original 8w level. Acceptable, but not good.
This seems to indicate there're at least two problems with the power management aspect of T400 + Win7 x64:
First, there is the well-known problem that both internal and external graphics cards get turned on upon resume. Lenovo, please fix this problem. It's completely unacceptable to have to manually perform that switching every time one closes, and then opens the lid, or loss 60% of the battery life. And I do need to use the external GPU from time to time, so disabling it at BIOS level is not acceptable either.
Second, there is the more subtle problem that some other hardware/driver besides the graphics card makes the T400 draw an extra >1w upon resume.
I really wonder if these problems occur with T400 preinstalled with Win7 x64. If they do, shouldn't every major laptop review sites take notice of the defect and warn people. If they don't, then I do not really see why it's so hard for Lenovo to provide earlier users with the right driver/registry patch/etc to enable the correct behavior. As far as I know, these problems have not been fixed since Win7 came out.
Finally let me add that other that this, I'm extremely satisfied with my T400/Win7 system. The thermal dissipation, noise level, and durability are just top-notch. But this just makes the above mentioned problems more of a thorn in the side! -
I am trying to install SC6 Photoshop and Bridge on a new Mac laptop. Though I have the software the laptop doesnot have a disk drive so I copied it from my desktop and transferred it via a portable hard drive. I get a message: Configuration error. Please uninstall and reintall... Error 16
Hi midtone,
Is it possible to download the product? It seems that copying didn't work.
If you can download then please use this link: Download CS6 products
-Ankit -
Can't use mouse/keyboard/trackpad when waking iMac from sleep mode
Basically as the title says. When I wake my iMac from sleep mode I am unable to use my keyboard/trackpad/mouse during the login window. Once the screen goes black by itself, after a minute or so I can then log in properly.
Yes the keyboard/mouse/trackpad are all connected when it wakes from sleep as I can use any of them to wake it from sleep, I just can't move them or type with them in the login window.
Processor 3.4 GHz Intel Core i7
Memory 24 GB 1600 MHz DDR3
Graphics NVIDIA GeForce GTX 680MX 2048 MB
Software OS X 10.8.5 (12F37)Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test. -
Hello,
My config is OSX 10.9.1 new macbook pro 13 retina (2014).
The wifi does not reconnect automatically when waking up from sleep mode since I have a Bluetooth apple magicmouse.
It was not the case before I bought the BT mouse.
Is this problem between Wifi and bluetooth coming from the OS?
Is there a fix already available or scheduled?
ThanksHello alexandrefromfrance
Check the Symptom: The network connection drops unexpectedly section for steps on what to do when your MacBook Pro does not connect after waking from sleep. I have also quoted the section on troubleshooting the issue as well.
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
Symptom: After restarting or waking from sleep, my computer might not connect to the Internet
After waking from sleep or starting up, your computer may not show that it is connected to a Wi-Fi network.
After start or wake, your computer may indicate that it is connected to a network, but does not connect to the Internet.
Solution
Use these steps if your computer does not automatically connect to your desired Wi-Fi network.
Check your TCP/IP settings in the Network pane of the System Preferences. Click the "Renew DHCP lease" button
Choose System Preferences from the Apple menu.
Choose Network from the View menu.
Select Wi-Fi, then click the Advanced button in the lower-left hand corner of the screen.
Click the TCP/IP tab from the top of the screen.
Click the "Renew DHCP lease" button.
Select the Wi-Fi tab and view your Preferred Networks list.
Select each network and click the minus sign to remove those networks from your Preferred Networks list.
Click OK and close the Network preferences.
Remove your stored network passwords using the Keychain Access Utility.
Open Keychain Access from /Applications/Utilities. Your window will look like this:
Remove your AirPort network passwords from the login keychain: Select the "login" keychain from the Keychain sidebar. Click the "Kind" column to order the list of keychain items by their type. Remove all entries of the kind: "AirPort network password".
Remove your AirPort network passwords from the System keychain: Select the "System" keychain from the Keychain sidebar. Click the "Kind" column to order the list of keychain items by their type. Remove all entries of the kind: "AirPort network password". Note: The above steps will remove your Wi-Fi network passwords. If you do not know them, or if your network does not use passwords to restrict access, you should contact your network administrator.
Restart your computer.
Join your Wi-Fi network. You will need to enter your password for your network again if it requires one.
Regards,
-Norm G. -
Firefox hand every time when laptop exit from sleep mode. Tested on 5 laptops with windows 7.
Same exactly problem here, very annoying when the computer goes to sleep mode and then Firefox locks up.
-
X200s sometimes hangs/freezes when goes back from sleep
There is a confirmed bug in ubuntu jaunty/karmic running on lenovo x200 series notebooks. Shortly, it sometimes hangs/freezes when goes back from sleep mode.
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/479842
Does anyone know anything about it? How do i contact lenovo engeneer about it?
Here is filled bug report in ubuntu bugtracker: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/479842There is a confirmed bug in ubuntu jaunty/karmic running on lenovo x200 series notebooks. Shortly, it sometimes hangs/freezes when goes back from sleep mode.
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/479842
Does anyone know anything about it? How do i contact lenovo engeneer about it?
Here is filled bug report in ubuntu bugtracker: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/479842
Maybe you are looking for
-
APEX Application Process Automation
In my app, I have to keep track of people who are going on vacation and when they are coming back to work; In my employee table, there is a column named status that shows whether they are on "Vacation" and when they are "On-Duty". Based on the status
-
HT3669 HP Officejet Pro 8500 Print to Fax with Mountin Lion
Does anyone know how to install the Fax Printer for an HP Officejet Pro 8500 to work with Mountain Lion? HP website says it's in Mountain Lion. Apple Support says its not, but it is a known problem and that HP has the fix. HP Yech Support reads tje w
-
ODBC Driver 8.1.7.3 - pending bugs?
Does somebody know if the problem below has been fixed with Oracle ODBC 8.1.7.3 driver for NT? Version 8.1.7.2.0 of the Oracle ODBC driver (with Net8 8.1.7.0.0) tends to fail with multithreading application, running only on a single processor. Theref
-
Submit Button verses Normal Button
Hi, Can any body say the difference between Submit button and normal button, i have called a function onClick() for both buttons, im finding refresh in SubmitButton ,where as with normal Button i didnt, could any body say the Reason please Thanq
-
I just imported the MSS Business Package and my client has chosen some functionality in "My Staff". I ahve created an "R3 dedicated system" in my landscape that all the iviews point to. My problem is that when I preview the iviews, some of them giv