Disk drive keeps kicking out when a new disc is put in.

Anyone,
I just got a new disc, which plays well in the car, but when I bring it in the house and put it in the
Lenovo G575, it just kicks it out and states in the dialog box, Insert a disc into Drive F. I then
bought a new pack of CD's and for everyone of them, I am getting the same message.
Can someone let me know what they think the problem would be and how I can resolve this.
Thanx so much in advance.
Jerry

Hi
Welcome To Lenovo Community
It seems there is some mechanical issue or dust in the drive which is hampering the disk to fit in the driver
Please visit Lenovo Service center to have it fixed
Hope This Helps
Cheers!!!

Similar Messages

My disk drive keeps spitting out my dvd that I'm trying to brun a slideshow on.

My disk drive keeps spitting out my dvd that I'm trying to brun a slideshow on. Why is it doing this and how can I fix ASAP?

You usually go all the way into the Burn process until it says "Insert a blank DVD now", THEN put in the DVD.
If you put the DVD in early, Mac OS X looks at it, decides it is blank and therefore useless, and spits it out.

My disk drive keeps spitting out cds

yeah i have a macbook that i have maybe had for 3 years and i cant put any recordable cds in because it keeps ejecting them from my computer the cd specs im trying to use are ( Memorex, DVD+R DL,8X,8.5GB) is there a way i can fix this with out buying anything or it being really affordable to repair because im broke and i really need to be dependable on my mac

You usually go all the way into the Burn process until it says "Insert a blank DVD now", THEN put in the DVD.
If you put the DVD in early, Mac OS X looks at it, decides it is blank and therefore useless, and spits it out.

I just installed OS X Yosemite and now my WD My Book Live external hard drive won't re-connect. My Safari keeps kicking out and giving me error message after error message and my computer is really slow. How do I resolve? Can I uninstall this ?

I just installed OS X Yosemite and now my WD My Book Live external hard drive won't re-connect. My Safari keeps kicking out and giving me error message after error message and my computer is really slow. How do I resolve? Can I uninstall this ? I had to re-connect my iMovie t

USB2.0 PCI cards that use the NEC chipset seem to give the least amount of problems for Mac users.
OWC have a few different ones for sale.
http://eshop.macsales.com/Search/Search.cfm?Ntk=Primary&Ns=P_Popularity%7c1&Ne=5 000&N=7057&Ntt=USB2**0**cards
Do you also connect the external USB drive to the AC power as well while you use it ?
Sometimes USB external drive problems are resolved simply by plugging them into the mains power and trying again.
Stewie
Message was edited by: stewiesno1

Cant reinstall cs5 to my new macbook pro. the disk is keep ejecting out.

Can't reinstall cs5 to my new macbook pro. the disk is keep ejecting out.

Hi Hj yo,
Please use the below link to download CS5 software.
http://helpx.adobe.com/creative-suite/kb/cs5-product-downloads.html
Thanks

External keeps kicking out

I have a 500gb Lacie external drive. Im trying to organize some files, moving all project files onto one drive (a 2gb internal drive) so Im trying to copy the files from the Lacie to the 2GB internal, but Lacie keeps kicking out and saying "device removed improperly" or something to that effect.
(if its failing, I especially want to get stuff off it)
since it has kicked out several times now, if I try to recopy the files, i get the option, to "replace already existing files" but should I un-check that and say "dont replace" will that duplicate the files or will it ignore them?
if it ignores them, that would be great but if its going to duplicated them (in lieu of "replacement") I don't want that.
whats with electronics anyway? this drive it not that old! under a year!
... and how do I know if its in fact Lacie, or the G5 port?

BD
Ive got two "duals"... one was supposed to be a really bullet proof one, Firemax its called but the chip set was never good from day one! I tried to get the company to send me a new chipset but they wouldent. the drives tested good but the enclosure is useless! it has an 800 port.
I was thinking something like this....
http://cgi.ebay.com/New-SATA-II-6-BAY-Hot-Swappable-Storage-Enclosure-Case-/3803 30301224?pt=LHDefaultDomain0&hash=item588d73d728
this one seems really cheap! probably something wrong with it?...
http://cgi.ebay.com/Intel-6-Bay-SAS-SATA-Hard-Drive-Enclosure-AXX6DRV3GEXP-/3102 85046072?pt=COMPEN_NetworkingComponents&hash=item483e6e1138

HT2801 my disk drive will start up when i plug it in, and runs for about 30 seconds, but wont get recognized in my computer. It used to show up in the finder but that doesnt happen anymore

my disk drive will start up when i plug it in, and runs for about 30 seconds, but wont get recognized in my computer. It used to show up in the finder but that doesnt happen anymore

If you go to Disk Utility, can you see the drive on the left hand side? If not, then the drive is dead. You'll have to buy a new drive.
Also, this forum is "Older Hardware". We specialise in hardware from the 1980s.

My MacBook Pro DVD drive keeps spinning and looking for a disc when there isn't one.

My MacBook Pro disc drive keeps spinning and looking for a disc when there isn't one in there. The DVD application is closed and as far as I can tell, the eject button is not stuck. I've restarted, but the problem persists. Please help!

Try these methods:
credit Kappy,
Ciao.

HT4623 I am having trouble with my iPod 5th gen after iOS update. It's in recovery mode and iTunes keeps timing out when I try to restore it. What should I do???

I am having trouble with my iPod 5th gen after iOS update. It's in recovery mode and iTunes keeps timing out when I try to restore it. What should I do??? If possible, I would also like to keep all of my data.

Maybe this will help:
Troubleshooting
As with all clickwheel iPods, you can reset this iPod by first toggling the hold switch on and off and then simultaneously pressing the select (center) and menu buttons for approximately 5-10 seconds. This is a common fix should your iPod behave unexpectedly or lock up. Once reset, the iPod should display an Apple logo for a few seconds before showing the main menu. This procedure is similar to rebooting a computer and damages none of your music or data.

Iphone 5 keeps cutting out when still got charge init

CCan somebody help me my iPhone 5 keeps cutting out when still got charge left in it it is two years old also lose signal a lot help please

Depending on the age of the phone and its usage, this could be battery issue and your battery might have to be replaced. If the phone is still charging with your fathers USB cable, make sure it is charged for at least 15min, then try to connect in recovery mode, explained here:
iOS: Unable to update or restore
If this does not work, you'll have to get it checked out by visiting an Apple Store or Authorized Apple Service Provider next to your place or by contacting Apple directly: Apple - Support - Service Answer Center

ADSL Broadband keeps dropping out when trying to u...

Hi, hope someone can offer some advice please.
Our connection seems to have got a lot slower over the last few months (about 2.64 on a very good day) and now keeps dropping out when trying to use either the laptop or PS3. I have followed the advice on the self help guide and tried changing the ADSL filter, moved the hub away from the telephone, re-booting the hub and tried using it directly in the test socket and none of these have solved the problem. I have done a line test from work and it says there are no problems with the line??? I am getting really annoyed as we only have the phone line so we can use the internet so are paying over £40 a month for service we cant even use. I get the impression that as there are so many users on ADSL where I live (we dont have fibre optic yet) that it is too much for the exchange and that BT are upping peoples connections when they complain thus making other peoples worse (we had this problem about a year ago and complained and it was ok for a while)
Could this be true? Or am I just thinking too much in to it? And does anyone have any suggestions on how I could resolve the problem? I have had a bad experiance with being charged for an engineers visit in the past (eventually refunded) so would like to avoid having to get them involved if possible.
Thanks in advance.

you post the adsl stats from your router may need to 'show detail' to get all stats (if hub enter 192.168.1.254 in your browser and navigate to adsl or use a-z, if netgear enter 192.168.0.1) and run btspeedtester (MAC users may have problems) http://speedtester.bt.com or http://bt.custhelp.com/app/answers/detail/a_id/9354/c/346,4740,5520 and post the results .
Someone may then be able to offer help/assistance/suggestions to your problem
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Tabular data model: Query keeps timing out when attempting to Edit Table Properties

Tabular data model (SSDT)
Problem: I have a table in tabular data model using a SQL Query for a data source. The query in question requires about 3 minutes to regenerate. When I open Edit Table Properties for this data source the query times out and I get an error (see below): "
Failed to retrieve data from udvTrainJobReportsData. Reason: Query timeout expired"
This seems to happen anytime I use a query that takes longer than a couple of minutes to regenerate. Anyone have an idea on how to get around this. Is there a timeout setting somewhere in tabular data model that can be increased?
Thanks...

Hi ManikantM,
According to your description, you query keeps time out when edit table properties. Right?
In this scenario, this error is thrown when connection or query execution exceeds the time out value. Please try to import this table and then increase the connection time out seconds.
We can increase to ExternalCommandTimeout in Analysis Server Properties. Please refer to link below:
http://aniruddhathengadi.blogspot.in/2012/07/ole-db-error-ole-db-or-odbc-error-query.html
Please also refer to a similar thread below:
https://social.technet.microsoft.com/Forums/office/en-US/3f83a26b-71c6-462e-8b90-2ce2ce0b9465/powerpivots-2010-query-keeps-timing-out-when-attempting-to-edit-table-properties?forum=excel
Best Regards,
Simon Hou
TechNet Community Support

HT1338 Why does my VPN keep dropping out on my new MAC?!?! Could it be anything to do with the MTU settings?

Why does my VPN keep dropping out on my new MAC?!?! Could it be anything to do with the MTU settings?

I am having the same exact problem as you described I can't see your Screen Shot.
Try these methods.. they are supposed to work, but havent for me maybe your luck is different. http://osxdaily.com/2012/11/30/resolving-stubborn-wi-fi-connection-problems-in-m ac-os-x/t
If i go right next to my router the internet works fine but where I used to get 5 bars I get like none and if im lucky 1. Didnt' have this issue 2 - 3 days ago

My computer is running loudly and then kicks out when i insert a disk.

There is something wrong with my computer. It cannot run the disk. Each time when i insert a disk, it is running loudly but 45 seconds later, it kicks out. I am sure the disk has no problem. http://www.bidanswer.com/Questions/QuestionInfo_10434.html

This is not remotely a photography question.
You need to search for the site of your computer's manufacturer.

Disk drive keeps stuttering when starting up iTunes

I am trying to import Beck's The Information (in case anyone else has had a problem with this particular CD). Whenever I try to run iTunes, two things happen at once: the program refuses to respond, and the disk drive starts and stops in two-second intervals.

Hello Liontail, welcome to the HP Forums.
I see that when you try to do the recovery with disks, the "pixels are huge" and it makes it so you cannot proceed. I will try to help you with this.
A suggestion to start with that may make it so its not so large on the screen.
press ctrl + minus (-) or ctrl and scroll on your mouse, this acts as a zoom feature. It may allow you to continue.
You may also have to adjust the screen resolution.
Please let me know if that's able to help you.
Thank you for posting on the HP Forums.
I worked on behalf of HP.

Disk drive keeps kicking out when a new disc is put in.

Similar Messages

Maybe you are looking for