Disk drive registry error code 19

I cannot use my disk drive i get error code 19 in the
registry, i have tried deleting the driver and
down loading a new driver but nothing seems to work. Can anyone
suggest a solution?
caps lock on/off

Solution here:
http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T410-DVD-driver-does-not-install-properly-Y...

Similar Messages

HP LaserJet Pro M1536dnf Multifunction Printer (unable to add print driver hpfax1, error code 87)

Hi, my printer HP LaserJet Pro M1536dnf Mfp, suddenly didnt work so i remove the printer, and downloaded a new driver http://support.hp.com/us-en/drivers/selfservice/HP-LaserJet-Pro-M1536-Multifunction-Printer-series/3974271/model/3974278#Z7_3054ICK0KGTE30AQO5O3KA30R1 once dowloaded, i run it and uninstall the printer, restart my pc, and proceed to installing. but in the process of installing a error occurr, saying that "Unable to add printer, error code 87", and that " HP Toolbox FX has encountered an error and can not recover. once i click ok. it tells me to restart my pc and reinstall it again. i did it for 8x, and still with the same error. please help really need a help right now. as my boss is going to kill me

Hey , Welcome to the HP Support Forums!
I understand that you're getting the error 'Unable to add print driver hpfax1, error code 87' when installing your HP LaserJet Pro M1536dnf Multifunction Printer on your Windows 7 computer. I would like to assist you today with resolving this install issue. Thank you for including all of the troubleshooting steps that you have completed prior to reaching out for support. At this time I am going to walk you through some additional software and driver troubleshooting steps. Please follow all of the steps below. If you're using your HP Laserjet through a USB Cable connection, please disconnect that cable now. Step one: Remove Driver: 1. Click on your Start menu 2. Select Control Panel 3. Select Programs and Features 4. When Programs and Features opens a list of programs installed on your computer will populate. Click on the 'Installed ON' tab at the top to change the date so the recently installed items show at the top. This will make it easier to manually locate the three HP Laserjet items you need to uninstall. 5. Next, look for the HP LJ M1530 MFP Series HP Scan, HPLaserJetHelp_LearnCenter, and HP LaserJet Professional M1530 MFP Series. If you see any 3 of these, or all 3 of these items, please click on them and select Uninstall. Once you have confirmed that those three items have been uninstalled, please close Programs and Features and proceed to the next step. Step 2: Clear Temp Files: Click on your Start menuIn the 'search programs and files' box located right above Start after you click on it, type %temp% and hit enter on your keyboardWhen the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will now highlight.Select the 'delete' button on your keyboard. The Temp folder contains temporary internet files. No actual files or folders on your computer will be affected by deleting the Temp files. Should a Temp file still be used than you will automatically get the pop up to 'skip' that item.Close the Temp folder once it is emptiedRight click the Recycling Bin on your desktop and select Empty Recycling BinPlease proceed to the next step. Step 3: Download Installer Package: Please click here to download the Full Feature Installer package. Once the download is complete, click on the download to allow it to 'Run'An extraction should now automatically occur. Once the extraction is complete an installer window will open. Please close the installation window. You do not want to run the installation at this time. Step 4: Run Scrubber: To ensure that no trace of the HP Software and Driver package remain on your computer, I am going to have you run a Scrubber built into the installer package for your printer. Click on your Start menuIn the 'search programs and files' box located right above Start after you click on it, type %temp% and hit enter on your keyboardWhen the Temp folder opens locate the 7z folder. Click on this folder to open it. This is the HP Laserjet Installer Click on the Utilities folder under the 7z folderDouble left click on Scrubber. It is an application which should launch the HP Uninstaller. Please follow the onscreen prompts to complete the uninstaller. Once the uninstall has completed please proceed to the next step. Be sure to Restart your computer if the uninstall process prompts you to. Step 5: Check Print Server Properties: Click on your Start menuClick on Devices and PrintersIn the Devices and Printers window look for your HP Laserjet. If you see it listed please right click on it and choose 'Delete' or 'Remove Device'. Next, click on any device listed under 'Printers and Faxes' once just to highlight itClick Print Server Properties at the top of the windowClick on the Drivers tabLook for your HP Laserjet driver. If you see it click on it and click Remove at the bottomClick Remove Driver OnlySelect OKSelect Apply and OK on the Print Server Properties windowClose Devices and Printers. Please proceed to the next step. Step 6: Run Disk Cleanup Utility: Click on your Start menuSelect All ProgramsSelect AccessoriesSelect System ToolsSelect Disk Cleanup Run a Disk Cleanup on the C DriveWhen prompted, check Downloaded Program files, Temporary Internet Files, Recycle Bin, Temporary Files, and Thumbnails Once the Disk Cleanup is complete, please proceed to the next step. Step 7: Run CCLeaner: To ensure that there are no malicious files on your computer or Registry conflicts on your computer I am going to have you run a CCLeaner before we install your printer. Please click here to download the CCLeaner Tool. Once the website opens select the link at the top for 'Free Download'. Once the download is complete please complete the Scan. Should multiple malicious files be found you may need to run the Scan multiple times to remove all malicious files. Once your system comes back as clean, please proceed to the last step. Step 8: Install Device: Please click here to download the Full Feature Installer package for your HP LaserjetOnce the download is complete please allow the download to RunPlease follow the onscreen prompts to install your HP LaserjetIf using a USB Cable connection please do not plug in the USB Cable until the installer window prompts you to Once the installation has completed successfully please test your machine to confirm that everything is functioning properly. Please respond to this post with the result of your troubleshooting. I look forward to hearing from you. Good luck!

Oracle ODBC Driver Specifc Error Codes

Dear All,
I'm currently working in a migration assignment.I'm looking for a Technical document which consists error codes specific to Oracle ODBC Driver(ver.9.00.11.00).Any help in this regard will be appreciated.
Thanks & Regards,
Sam

There shouldn't be any Oracle ODBC Driver specific error codes. When you're talking about ODBC and error codes, there are two possibilities-
1) You're looking at the SQLState return codes. These are part of an ISO standard (they're more than happy to sell you a copy) and are documented in the ODBC Programmer's Reference from Microsoft as well as most decent ODBC guides.
2) You're looking at the Oracle specific error codes that are returned as the error text in ODBC. These (potentially) depend on the version of the database you're connecting to, rather than the version of the client software you have, and are covered in Oracle's error message manual available at tahiti.oracle.com
Justin

I have burned CDs before from 2gb to 7gb using different types of discs. Now I get this error message Apple error The disc can't be burned because communication between the computer and the disc drive failed (error code 0x80020022). What should I do

I have burned CDs before from 2gb to 7gb using different types of discs. Now I get this error message Apple error The disc can't be burned because communication between the computer and the disc drive failed (error code 0x80020022). What should I do

Reset the SMC, as per > Resetting the System Management Controller (SMC)
1. Shut down the computer.
2. Unplug the computer's power cord.
3. Wait fifteen seconds.
4. Attach the computer's power cord.
5. Wait five seconds, then press the power button to turn on the computer.
Then zap the PRAM/NVRAM as per > About NVRAM and PRAM
1. Shut down the computer.
2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
3. Turn on the computer.
4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
6. Release the keys.
Then retry the Disc Drive.

I am trying to burn a CD and keep getting this error message: Burning disc failed because communication to the disc drive failed. (error code 0x80020022) Any suggestions??

Burning disc failed because communication to the disc drive failed. (error code 0x80020022) Any suggestions??

Sadly, that error has umpteen causes, sometimes the drive is going out, sometimes it's bad media, sometimes a slower burn works, & rarely a Cleaning Disc helps.
Bad File names can even cause it...
http://www.bbqiguana.com/2010/02/macos-x-error-0x80020022-trying-to-burn-dvds/

Disk utility reports failing hard drive with error code STF/8/3:2 ATA BUS 0

My imac G5 (running Tiger) suddenly decided not to boot past the grey apple screen with the spinning wheel. I ran the disk utility and received error code STF/8/3:2 ATA BUS 0 MASTER on the mass storage test. I tried to run repair and only received a message "fatal hard drive error etc... back up, recover asap... I could not access the disk so I connected my new MacBook Pro by firewire in target disk mode. My HD shows up however, "nothing" shows up under when my "user" file. All I care about saving is my iphoto library. Everything else is trivial. Can someone Please help me? Is there any way I will be able to save this file?
Message was edited by: Elizabeth Burson

Welcome to Discussions - you can try DiskWarrior and see if it can retrieve some of your data. You can also take it in to Apple with an external fire wire drive you have purchased elsewhere (cheaper) and see if they can transfer the data. You can then install the external into your computer.

Re: Cd/DVD drive issue - error code 39 on Satellite P series

Hi,
This is my first request for help.
My CD/DVD drive is no longer recognized and when I go to Device Manager and click on CD/DVD I am informed that the file cdrom.sys is there but cannot be loaded.
An error number 39 is reported.
Any advice would be greatly appreciated but please keep it simple to one line actions if possible.

Of course you can get some advices ;)
I think you would find it faster if you would search in the forum firstly but I will try to help you too.
There error code 39 is very common issue and can be solved easy;
Check this MS knowledge base article:
http://support.microsoft.com/kb/314060/en-us
So firstly remove the CD/DVD drive from the device manager.
Then access the registry using the regedit command and remove the Upperfilters and Lowerfilters values completely from the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
Reboot the notebook and wait till the CD/DVD drive was installed again.
Thats it. ;)

External hard drives and Error Code -36

Just wanted to know if anyone knows what this error code means. I tried copying a bunch of video files about 600-700 mb to my USB external hard drive, and this error message popped up and said the disk could not be read or written to. I contacted the manufacturer of the hard drive and they said it was not a manufacturing fault, but an issue regarding the operating system.
Does anyone know why this might be? And also, does anyone know of anyway to get around it?
Thanks.

You can try DiskWarrior to repair the directory. If DW can't do it, you'll need to re-format the drive. I'd also suggest a zero out erase.
Steps for zeroing the drive Disk Utility:
1. Insert your Mac OS X CD-ROM disc or Restore DVD disc, then restart the computer while holding the C key until you see the spinning gear.
2. Once started up from CD or DVD, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.) 
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from disc to access Disk Utility.
3. Choose the entire disk (top icon).
4. Choose erase tab.
5. Click on "Security Options"
6. Choose "write zeros".
7. Erase
This will take a bit of time because the computer is physically writing zeros to each block.

Hard disk fail. unintelligible error code.

Hi: i have a non-booting hp G62 -b20SA. The in-built diagnostics give me a Fail code: GLQJK9-5LM681-9XLO3F-6OT303 and a Product Id: XF390EA#ABU and HardDisk 1 and a web URL. What does this code mean?. I have been round and round the site and nowhere can I find a 'enter your error code here' box. Can someon please explain what this means and what I can do about it.
Tks
This question was solved.
View Solution.

Hi,
The error code will be a Smart or Disk Self Test failure - in either case, it would indicate that the Hard Drive is failing and needs to be replaced.
If your notebook is still under warranty, contact HP and arrange to have the drive replaced - you can check your warranty status Here.
If you live in the US, contact HP Here.
If you are in another part of the world, start Here.
If you are out of warranty and would like a guide on replacing the Hard Drive yourself, please let me know.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Can't see external hard drive after error code -36

Hi, was copying iphoto data from an WD My Passport 750GB external hard drive to my MACBook when the system said it could not complete the copy as it had encountered a problem and indicated error code -36. Now I can't see the external drive (or any data) on any computer. I have tried 3 different MACs to no avail. The drive makes a soft beeping noise but then stops but the light stays on.
Any ideas on how I can get access to my data??

Make sure the cable is securely seated on the device side.
If that's not the problem, then either the drive mechanism or the enclosure has failed. If you don't have backups, you'd better hope it's the latter. Remove the mechanism from the enclosure and install it another enclosure. You can buy fairly inexpensive USB docks that a SATA drive drops into with no need for disassembly.
Failing that, your only chance is to send the drive to a recovery service such as Drive Savers. They disassemble the drive mechanism in a clean room and mount the platters in another drive. Cost will be in the 4-5 figure range, and the results are uncertain.
If you don't have backups, you don't have data.

Cannot access time machine, backup disk not available error code.

My time machine stopped backing up. It is a 2TB. I get error code -6584. and says backup disk not available. Coincidentally, I had to reset my time machine for a forgotten password about 6 days ago. Wi-fi works fine, but a few days later when trying to access old files throughout the time capsule I could not. Said my last back up was the day the time machine had to be reset. I have 1.79 of TB used..which is weird my computer is only 4 G and have only filled up 2.4 G of it.
ANy ideas?

We haven't seen report of problem with 6584 for a while. It generally means a corrupted backup. You need to do a verify of the back.
See A5 here. http://pondini.org/TM/Troubleshooting.html
This will take a very very long time if the backup has almost filled the TC.. so at least use ethernet connection.
You do have a problem.. the formatted capacity of a 2TB disk is 1.8TB.. If you have used up 1.79TB then sorry but you really need to erase the TC and start over.
The TM can fill up huge disks if you use parallels or dropbox or any dual boot system that has a virtual disk file.. TM will backup 20GB for every 1KB change. That file is hidden btw so you might not see it but I assure you it will chew up space.
I don't know what you mean by computer having only 4GB. That would make it rather ancient.. Surely even smallest SSD must be 64 or 128GB.

Cant copy from External Drive get error Code 50

I have a Mac Pro and suddenly it won't copy files from any external drive, or write them either. The drives mount and show up in fiinder, and they start copying, but after about 30 seconds they error out with "The operation can't be completed because an unexpected error occurred (error code 50).
It has done this on two different Mac Pros and 3 different external drives. I don't remember this haqppening before. I have Paragon NTFS running on both Macs and they have worked flawlessly for maqny months but now they won't complete. Any help would be appriciated.
[email protected]

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on some Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. You'll only be able to read, not write, an NTFS volume. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode.)

Equium L300 - CD/DVD drive issue - error Code 39

*Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)*
This message is appearing in the device manager under CD/DVD ROM Drives for my laptop and is not running any cd's/dvd's.
I don't know much about my operating system or laptop in general other than that it's a Toshiba Equium L300 running on Vista Home Premium
Can anyone help me with this problem please?

Hey guys,
Thanks for the help and advice but after deleting the mentioned registry keys the problem still seems to be there, no cd/dvd is available and in the device manager the CD/DVDW SD-L622A ATA Device is still showing the same error
*Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)*
What else can I do are there other options?
I tried a system restore but it couldn't do that.

External hard drive displays error code 22

My Seagate GoFlex external hard drive displays code 22 when I try to initialize it to active status...what is code 22 ?

You should really contact the vendor about this. Try the Seagate Forum. This is not a ConfigMgr issue.
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Portege M200 - CD/DVD drive issue - error Code 39

I have a problem. I would like to perform a system recovery on my m200 tablet.
I have an external dvd drive (as the m200 does not have a built in drive), and the correct recovery disc.
However, due to a problem that occured some time ago, there is a problem with the driver (+Windows cannot load the device driver for this hardware.
The driver may be corrupted or missing. (Code 39)+), and so i cannot run the recovery.
If anybody knows a way that I can repair the driver, or another way to perform a system recovery, it would be extremely helpful!
A solution to one or both problems would be great.
Thank you very much!

Hi buddy
I think you try to boot from external driver which is not fully supported.
Please search in this forum for similar threads regarding the Protg M200 and booting from external CD/DVD drive.
I searched and found this:
The M200 supports the Recovery via BIOS (pressing "C") with USB 2.0 and PCMCIA cards (16bit and Cardbus 32bit).
Following drives and Controllers (USB, PCMCIA) are compatible:
a) Toshiba, PA3352E-SCD2, USB2.0 CD-RW/DVD-Rom Drive
b) Toshiba, PA3402E-1DV2, Rev.501, USB2.0 DVD Super Multi Drive
c) Toshiba, PX1055E-1NST with a PC Card (16bit), Cable II, PCMCIA,
d) Toshiba, PX1055E-1NST with a CardBus, Cable II, CARD BUS
You could be not able to recover the notebook using other external drives.

Disk drive registry error code 19

Similar Messages

Maybe you are looking for