Disk error message in Organizer

When I open Organizer in Acrobat Pro 9, I get a No Disk error message:
"There is no disk in the drive. Please insert a disk into drive \Devise\Harddisk\DR1" with buttons to Cancel, Try Again, Continue.
If I cancel [and I have to cancel twice for each error message, the message changes to ...Harddisk2\DR2 through to Harddisk4\DR4.
I always get there in the end, but how can I stop the error messages appearing in the first place? It's incredibly irritating!
There are no preferences for Organizer, and nothing I can see in the Acrobat preferences that would help.

I'm surprised PS even runs on that computer although of course 5.0 LE is pretty old.
A 165 MB file may just be too much for it.
How can you "set your c drive to 4096MB"? Do you mean Paging file?
We need someone with a long memory to chime in, but you do need to clarify what you are doing.

Similar Messages

No Disk error Messages in PSE8

On and off I keep getting the following error message when I switch between Edit and Orgainzier in PSE8
and sometime other times. Photoshop ElementsOrgainzer.exe-No Disk There is no disk in the
drive. Please insert a disk into drive \Device\Harddisk4\DR4.
I have to hit Cancel 3-4 times to get rid of it.
What is this and how do I stop it? Tks. ALan

I have recently experienced this message repeatedly in PSE6 running on Vista. I believe after either saving a file from PSE6 to a floppy in drive A or opening a file in PSE6 from an SD memory card in drive J. Resolved by recreating both situations then ensuring that i used photoshop to open files from and save files to the resident C drive before removing the floppy disk from drive A and using the 'safely remove hardware' function in Vista to confirm that it was safe to remove the SD card.
Following this procedure I have experienced no more 'no disk error messages'

Just installed PS 13 elements and loaded pictures into organizer. after using PS editor now organizer is not reloading. I keep getting error message saying organizer unexpectedly quit, do you want to reopen. When I click on it to reopen it doesn't and I

just installed PS 13 elements and loaded pictures into organizer. after using PS editor now organizer is not reloading. I keep getting error message saying organizer unexpectedly quit, do you want to reopen. When I click on it to reopen it doesn't and I get the same message again. I rebooted computer, still did it, I uninstalled and reinstalled the program and I am still getting the same error message. This is on Mac OS with yosemite. Any Ideas Please!!!

Thread 8:
0   libsystem_kernel.dylib         0x00007fff9219f4de mach_msg_trap + 10
1   libsystem_kernel.dylib         0x00007fff9219e64f mach_msg + 55
2   com.apple.CoreFoundation       0x00007fff97717b34 __CFRunLoopServiceMachPort + 212
3   com.apple.CoreFoundation       0x00007fff97716ffb __CFRunLoopRun + 1371
4   com.apple.CoreFoundation       0x00007fff97716858 CFRunLoopRunSpecific + 296
5   com.apple.AppKit               0x00007fff8e85533b _NSEventThread + 137
6   libsystem_pthread.dylib       0x00007fff974c1268 _pthread_body + 131
7   libsystem_pthread.dylib       0x00007fff974c11e5 _pthread_start + 176
8   libsystem_pthread.dylib       0x00007fff974bf41d thread_start + 13
Thread 9:: cr_scratch
0   libsystem_kernel.dylib         0x00007fff921a4136 __psynch_cvwait + 10
1   com.adobe.CameraRaw           0x000000012122478b 0x120c28000 + 6277003
2   com.adobe.CameraRaw           0x00000001211ad48b 0x120c28000 + 5788811
3   com.adobe.CameraRaw           0x0000000120fad001 0x120c28000 + 3690497
4   libsystem_pthread.dylib       0x00007fff974c1268 _pthread_body + 131
5   libsystem_pthread.dylib       0x00007fff974c11e5 _pthread_start + 176
6   libsystem_pthread.dylib       0x00007fff974bf41d thread_start + 13
Thread 10:
0   libsystem_kernel.dylib         0x00007fff9219f4de mach_msg_trap + 10
1   libsystem_kernel.dylib         0x00007fff9219e64f mach_msg + 55
2   com.apple.CoreFoundation       0x00007fff97717b34 __CFRunLoopServiceMachPort + 212
3   com.apple.CoreFoundation       0x00007fff97716ffb __CFRunLoopRun + 1371
4   com.apple.CoreFoundation       0x00007fff97716858 CFRunLoopRunSpecific + 296
5   com.apple.CoreFoundation       0x00007fff977ccef1 CFRunLoopRun + 97
6   com.adobe.ols.library         0x00000001235ebc86 OLSHTTPTransaction::Execute() + 4166
7   com.adobe.ols.library         0x00000001236174f9 OLSServiceTask::PerformMessageExchangeServerPOST(OLSAutoRefPtr<OLSElement> const&, OLSAutoRefPtr<OLSElement> const&) + 1849
8   com.adobe.ols.library         0x000000012360958a OLSServiceTask::PerformMessageExchangeServer(OLSAutoRefPtr<OLSElement> const&, OLSAutoRefPtr<OLSElement> const&) + 1834
9   com.adobe.ols.library         0x000000012361626c OLSServiceTask::ProcessUnhandledMessageList(OLSAutoRefPtr<OLSElement> const&, OLSAutoRefPtr<OLSElement> const&, OLSAutoRefPtr<OLSElement> const&, OLSMessageOrigin) + 1804
10 com.adobe.ols.library         0x00000001235c885c OLSClientSession::ProcessUnhandledMessageList(OLSAutoRefPtr<OLSElement> const&, OLSAutoRefPtr<OLSElement> const&, OLSAutoRefPtr<OLSElement> const&, OLSMessageOrigin) + 124
11 com.adobe.ols.library         0x00000001235c6921 OLSClientSession::ProcessMessageList(OLSAutoRefPtr<OLSElement> const&, OLSAutoRefPtr<OLSElement> const&, OLSMessageOrigin) + 2593
12 com.adobe.ols.library         0x0000000123608d3a OLSServiceTask::ExecuteStateMessageExchangeServer() + 426
13 com.adobe.ols.library         0x00000001236010cc OLSServiceTask::ExecuteInternal() + 1196
14 com.adobe.ols.library         0x000000012361b22e OLSTask::Execute() + 350
15 com.adobe.ols.library         0x000000012361c874 OLSWorkerThreadTaskManager::ProcessTasks(OLSTaskThread*) + 1300
16 com.adobe.ols.library         0x000000012361b454 OLSTaskThread::Run() + 36
17 com.adobe.ols.library         0x000000012363fd88 OLSThread::ThreadProc(void*) + 54
18 com.apple.CoreServices.CarbonCore 0x00007fff9c7108dc PrivateMPEntryPoint + 58
19 libsystem_pthread.dylib       0x00007fff974c1268 _pthread_body + 131
20 libsystem_pthread.dylib       0x00007fff974c11e5 _pthread_start + 176
21 libsystem_pthread.dylib       0x00007fff974bf41d thread_start + 13
Thread 11:
0   libsystem_kernel.dylib         0x00007fff921a475a __sigwait + 10
1   com.adobe.ElementsOrganizer13 0x000000010dce1a84 0x10cc7e000 + 17185412
2   com.adobe.ElementsOrganizer13 0x000000010dce5d15 0x10cc7e000 + 17202453
3   libsystem_pthread.dylib       0x00007fff974c1268 _pthread_body + 131
4   libsystem_pthread.dylib       0x00007fff974c11e5 _pthread_start + 176
5   libsystem_pthread.dylib       0x00007fff974bf41d thread_start + 13
Thread 12:: com.apple.NSURLConnectionLoader
0   libsystem_kernel.dylib         0x00007fff9219f4de mach_msg_trap + 10
1   libsystem_kernel.dylib         0x00007fff9219e64f mach_msg + 55
2   com.apple.CoreFoundation       0x00007fff97717b34 __CFRunLoopServiceMachPort + 212
3   com.apple.CoreFoundation       0x00007fff97716ffb __CFRunLoopRun + 1371
4   com.apple.CoreFoundation       0x00007fff97716858 CFRunLoopRunSpecific + 296
5   com.apple.CFNetwork           0x00007fff8fcfac80 +[NSURLConnection(Loader) _resourceLoadLoop:] + 434
6   com.apple.Foundation           0x00007fff90df190a __NSThread__main__ + 1345
7   libsystem_pthread.dylib       0x00007fff974c1268 _pthread_body + 131
8   libsystem_pthread.dylib       0x00007fff974c11e5 _pthread_start + 176
9   libsystem_pthread.dylib       0x00007fff974bf41d thread_start + 13
Thread 13:: com.apple.CFSocket.private
0   libsystem_kernel.dylib         0x00007fff921a43fa __select + 10
1   libsystem_pthread.dylib       0x00007fff974c1268 _pthread_body + 131
2   libsystem_pthread.dylib       0x00007fff974c11e5 _pthread_start + 176
3   libsystem_pthread.dylib       0x00007fff974bf41d thread_start + 13
Thread 14:
0   libsystem_kernel.dylib         0x00007fff921a4136 __psynch_cvwait + 10
1   com.adobe.ElementsOrganizer13 0x000000010dce02fd 0x10cc7e000 + 17179389
2   com.adobe.ElementsOrganizer13 0x000000010cd34e19 0x10cc7e000 + 749081
3   com.adobe.ElementsOrganizer13 0x000000010dce5d15 0x10cc7e000 + 17202453
4   libsystem_pthread.dylib       0x00007fff974c1268 _pthread_body + 131
5   libsystem_pthread.dylib       0x00007fff974c11e5 _pthread_start + 176
6   libsystem_pthread.dylib       0x00007fff974bf41d thread_start + 13
Thread 15:
0   libsystem_kernel.dylib         0x00007fff921a4136 __psynch_cvwait + 10
1   com.adobe.ElementsOrganizer13 0x000000010dce02fd 0x10cc7e000 + 17179389
2   com.adobe.ElementsOrganizer13 0x000000010cd34e19 0x10cc7e000 + 749081
3   com.adobe.ElementsOrganizer13 0x000000010dce5d15 0x10cc7e000 + 17202453
4   libsystem_pthread.dylib       0x00007fff974c1268 _pthread_body + 131
5   libsystem_pthread.dylib       0x00007fff974c11e5 _pthread_start + 176
6   libsystem_pthread.dylib       0x00007fff974bf41d thread_start + 13
Thread 16:: JavaScriptCore::BlockFree
0   libsystem_kernel.dylib         0x00007fff921a4136 __psynch_cvwait + 10
1   libc++.1.dylib                 0x00007fff8fb2ad2e std::__1::condition_variable::__do_timed_wait(std::__1::unique_lock<std::__1::mutex>&, std::__1::chrono::time_point<std::__1::chrono::system_clock, std::__1::chrono::duration<long long, std::__1::ratio<1l, 1000000000l> > >) + 126
2   com.apple.JavaScriptCore       0x00007fff99593aaa JSC::BlockAllocator::waitForDuration(std::__1::chrono::duration<long long, std::__1::ratio<1l, 1000l> >) + 170
3   com.apple.JavaScriptCore       0x00007fff993828f4 JSC::BlockAllocator::blockFreeingThreadMain() + 84
4   com.apple.JavaScriptCore       0x00007fff9937814f WTF::wtfThreadEntryPoint(void*) + 15
5   libsystem_pthread.dylib       0x00007fff974c1268 _pthread_body + 131
6   libsystem_pthread.dylib       0x00007fff974c11e5 _pthread_start + 176
7   libsystem_pthread.dylib       0x00007fff974bf41d thread_start + 13
Thread 17:: JavaScriptCore::Marking
0   libsystem_kernel.dylib         0x00007fff921a4136 __psynch_cvwait + 10
1   libc++.1.dylib                 0x00007fff8fb2ac95 std::__1::condition_variable::wait(std::__1::unique_lock<std::__1::mutex>&) + 47
2   com.apple.JavaScriptCore       0x00007fff99382f1b JSC::GCThread::waitForNextPhase() + 171
3   com.apple.JavaScriptCore       0x00007fff99382d78 JSC::GCThread::gcThreadMain() + 88
4   com.apple.JavaScriptCore       0x00007fff9937814f WTF::wtfThreadEntryPoint(void*) + 15
5   libsystem_pthread.dylib       0x00007fff974c1268 _pthread_body + 131
6   libsystem_pthread.dylib       0x00007fff974c11e5 _pthread_start + 176
7   libsystem_pthread.dylib       0x00007fff974bf41d thread_start + 13
Thread 18:: JavaScriptCore::Marking
0   libsystem_kernel.dylib         0x00007fff921a4136 __psynch_cvwait + 10
1   libc++.1.dylib                 0x00007fff8fb2ac95 std::__1::condition_variable::wait(std::__1::unique_lock<std::__1::mutex>&) + 47
2   com.apple.JavaScriptCore       0x00007fff99382f1b JSC::GCThread::waitForNextPhase() + 171
3   com.apple.JavaScriptCore       0x00007fff99382d78 JSC::GCThread::gcThreadMain() + 88
4   com.apple.JavaScriptCore       0x00007fff9937814f WTF::wtfThreadEntryPoint(void*) + 15
5   libsystem_pthread.dylib       0x00007fff974c1268 _pthread_body + 131
6   libsystem_pthread.dylib       0x00007fff974c11e5 _pthread_start + 176
7   libsystem_pthread.dylib       0x00007fff974bf41d thread_start + 13
Thread 19:: JavaScriptCore::Marking
0   libsystem_kernel.dylib         0x00007fff921a4136 __psynch_cvwait + 10
1   libc++.1.dylib                 0x00007fff8fb2ac95 std::__1::condition_variable::wait(std::__1::unique_lock<std::__1::mutex>&) + 47
2   com.apple.JavaScriptCore       0x00007fff99382f1b JSC::GCThread::waitForNextPhase() + 171
3   com.apple.JavaScriptCore       0x00007fff99382d78 JSC::GCThread::gcThreadMain() + 88
4   com.apple.JavaScriptCore       0x00007fff9937814f WTF::wtfThreadEntryPoint(void*) + 15
5   libsystem_pthread.dylib       0x00007fff974c1268 _pthread_body + 131
6   libsystem_pthread.dylib       0x00007fff974c11e5 _pthread_start + 176
7   libsystem_pthread.dylib       0x00007fff974bf41d thread_start + 13
Thread 0 crashed with X86 Thread State (64-bit):
rax: 0x00000000000000b0 rbx: 0x00006080000b4460 rcx: 0x00007fff52f7da08 rdx: 0x00007fff52f7d8c0
rdi: 0x00006080001d31a0 rsi: 0x0000000000000000 rbp: 0x00007fff52f7d860 rsp: 0x00007fff52f7d830
   r8: 0x00007fff52f7d9d8   r9: 0x00007fff52f7d9a0 r10: 0x0000000000000000 r11: 0x0000000110825b90
r12: 0x00007fff52f7d9a0 r13: 0x00007fff52f7e0e8 r14: 0x00007fff52f7d8c0 r15: 0x00006080000b4460
rip: 0x0000000110825ba6 rfl: 0x0000000000010206 cr2: 0x0000000000000000
Logical CPU:     1
Error Code:      0x00000004
Trap Number:     14

"Missing Disks" Error Message - Unable to open FCP

Every time I tried to open FCP, a "missing disks" error message shows up and prevents me from opening the application. It says, "To preserve the integrity of the date used by Final Cut Pro, it is necessary to ensure the existence of the following path(s):" and it says "Macintosh HD is offline." There are two options for the error message, "Check Again" or "Reset Scratch Disks." When I click "Check Again," nothing happens. When I click, "Reset Scratch Disks", it takes me to a "Scratch Disks" window, which shows, "9.8GB on Macintosh HD is offline." I click "OK", but it only takes me back the same "missing disks" error message. What should I do to solve this error and open FCP?
Thanks in advance.

Hi -
If you are mid-project, then first I would find your project file and make a duplicate by Control-clicking on it, and selecting Duplicate. You can rename that new file so it is easy to remember. Once that is done, you have a protection back up of your project file so that whatever happens, you can recover back to this point in your project by opening the duplicated file.
Selecting (or Re-Selecting) a Scratch Disk does not affect what has been done in a project's past, it will only affect what FCP will do once it is launched and where it will place media and renders as you go forward.
A bigger concern/interest to me is why the disk Macintosh HD is offline, since Macintosh HD is usually the name of the internal system disk on your computer.
Have you renamed your internal hard disk (either intentionally or unintentionally)?
Do you have external disks connected to your computer?
Have you installed any new software - like Snow Leopard, or Fusion?
If you have had the disk Macintosh HD selected as your scratch disk all throughout your project up to this point, it is likely that the disk Macintosh HD has your captured footage and renders. So . . . if it is off-line as a scratch disk, once you reset your scratch disk to an available drive and open your project, it is likely that the project will show that all your media, which it previously associated with the missing disk is offline as well.
If that is the case, you will need to reconnect your media and re-render your renders. This can be done by selecting your offline clips and Control clicking on one of them and selecting Reconnect Media . . .
*If you are not feeling confident about proceeding, I would recommend a trip to an Apple store to get someone to walk you through the process.*
Hope this helps.

How to stop receiving "AdobePremiereElements.exe - No Disk" error message at start-up

I upgraded from Premiere Elements 9 to 13 at Adobe. Install went without error, but each time I call up the program a window pops up entitled "AdobePremiereElements.exe - No Disk" with the following text within the window: "There is no disk in the device. Please insert a disk into drive \Drive\Harddisk1\DR1." I can eventually get this window to remove after repeated attempts, and the program seems to be running fine. Would appreciate knowing how to stop such nonsense and remove the annoyance. Thanks.

jimp
Thanks for the good news that the OldFilm.AEX file is gone and no more No Disc error message.
To update 13 to 13.1, you need to use an opened project's Help Menu/Updates.
Have you done that, and the message was that you were up to date already?
To check what version you have
Premiere Elements Editor. Help Menu/About Adobe Premiere Elements. The screen that then displays should show 13.1 if updated from 13 to 13.1.
That Help Menu/Updates location should let you take are of the Elements Organizer updating from 13 to 13.1.
Nonetheless, you can check on Elements Organizer Help Menu/Adobe Elements Organizer to assure that the screen that displays shows 13.1 instead of 13.
Any questions, please let me know.
Best wishes
ATR

Windows - No Disk error message when connecting Ipod to computer

I recently connected my Ipod to the Computer as I have done for the last year and I am now getting an error message reading: "Windows - No Disk". It then asks me to insert a disk. I cannot cancel out, continue or retry which are the three choices. I eventually have to Ctrl + Alt + Del to close out Itunes. Can anyone help? Thank You.
Dell XPS Windows 2000

I have been ejecting it. This problem only began recently. I read through about 30 pages of this forum and found someone postoing about the same problem. They said it may be McAfee Viruscan in the background.I'll check that out.

"Windows - No Disk" error message on file transfer

Hello!
I updated our ZDM7 server from plain old ZDM7 with no updates to ZDM7 SP1
IR1. Now, when initiating File Transfer operation with any workstation, up
comes this error message:
"Windows - No Disk"
"Exception Processing Message c0000013 Parameters 75b6bf9c 4 75b6bf9c 75b6bf9c"
[Cancel] [Try Again] [Continue]
If I click "Continue" 4 times, file transfer starts up successfully.
Any ideas about how to get rid of this annoying message?
Toomas Aas

Toomas,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

'No Disk' error message on Photoshop startup

Recently I have been receieving the following error message when Photoshop CS6 x64 srtarts up on my Windows 7 machine. Ps resides on my SSD.
I don't always get the message but when I press X, Cancel, Try Again, or Continue the message repeats until finally Ps starts. I'm not sure what drive \Device\Harddisk3\Dr3 is supposed to mean. Does anyone have a clue what Ps is complaining about?

I realize this is a mighty old thread, but I've recently had the same issue with Illustrator CSS 2014, and this is the only thread I could google that dealt with it.
I scratched my head for a while on this, but I think I figured out the issue. At least I think I figured it out on my end. The error comes from the "recently opened" menu as far as I can tell. I had an old external hard-drive that I was browsing some old work on. I unplugged it when done and continued to go along with my newer work the next day. When I attempted to save my newer work in Illustrator, I got the "no disk" message several times, but powered through it with "try again" till it saved.
I'm thinking the error is just the system bumping the file that I had recently opened and now cannot locate slowly down and eventually off the "recently opened" menu. Not sure why Windows is smart enough to bypass this error sometimes and not others with most portable drives, but perhaps its an issue with how old this drive was, or perhaps because I did not properly eject the drive. Networked drives being connected and not connected may cause a similar issue. Not sure.

"Can't read or write to disk" error message

hi...
got my husband a 16g nano and i'm trying to sync his songs. i have the newest version of itunes installed. it put almost half of the songs on the nano and all of a sudden itunes has an error that says something about "can't write to nano. disk is not readable or writeable." i can view the nano contents, but i can't add to it and it will not let me sync it anymore.
does anyone have any suggestions? thanks!

thanks jason,
i looked at the tips page you suggested and i tried it again on my new laptop and it still won't work. i'm going to try to restore it and then put it on the laptop again, hopefully that will work.
the odd thing is it will start to sync and it comes up with the error message about half way through syncing (half the songs do make it to the ipod.) why can't it sync the whole way?? i'm perplexed.

Importing CD - No Disk Error Message When Ejecting CD

Every since I upgraded my itunes to the latest version, I am getting an error message telling me there is no cd every time I eject my cd after importing. It gives me an option to retry, continue and cancel. No matter what I pick it does not recognize the next cd and my windows cursor is stuck in a rotating hourglass position even after I end the itunes program! Can anyone please shed some light? Thank you!

Thanks Bob! My problem was that I was following advice from elsewhere on the internet that said I should burn a DVD in UDF format when in fact just burning it using disk utility in ISO made it work. Thank you so much!

"Disk error" message on install

I have a CD for Windows XP Pro. I ran the BootCamp partition and the first part went smoothly. After I restarted to finish the install, I got this message in a DOS formatted screen...
Disk error
Press any key to restart
When I press a key, nothing happens. I have to restart and select OSX to get my computer back up.
Any suggestions?

Shaun:
Read *[_THIS ARTICLE_|http://docs.info.apple.com/article.html?artnum=306504]* written by Apple to address this issue. There are several threads on these forums discussing this issue and one of them is [HERE|http://discussions.apple.com/thread.jspa?messageID=6210710&#6210710].
*[_THIS THREAD_|http://discussions.apple.com/thread.jspa?messageID=6560499&#6560499]* discusses the entire issue in details and provides a solution.
Let me know how it goes and good luck.
Axel F.

Disk error message on Sun StorEdge 3310.

Hi guys,
Does anyone see the following error message in the /var/adm/messages? Should I have to replace this faulty disk?
Mar 6 11:06:21 balrog scsi: [ID 107833 kern.warning] WARNING: /pci@1d,700000/sc
si@1/sd@5,0 (sd36):Mar 6 11:06:21 balrog Error for Command: write(10) Error Level:Retryable
Mar 6 11:06:21 balrog scsi: [ID 107833 kern.notice] Requested Block: 5491072 Error Block: 5491079
Mar 6 11:06:21 balrog scsi: [ID 107833 kern.notice] Vendor: SEAGATE
Serial Number: 0447B9LRDV
Mar 6 11:06:21 balrog scsi: [ID 107833 kern.notice] Sense Key: Hardware Error
Mar 6 11:06:21 balrog scsi: [ID 107833 kern.notice] ASC: 0x32 (no defect spare location available), ASCQ: 0x0, FRU: 0x4
Looking forward to your comments.
Jeff.

A good output that would give you a hint of a problem is iostat -En
This output reports anykind of errors to a particular disk since the last reboot. If you are seeing high error numbers, then you can move onto running a file system check - fsck - on the drive.
If you have anykind of RAID setup, check to see if any issues are being reported. Depending on what you are using to manage the RAID - Veritas Volume Manager or Solaris Disk Suite - they will most certainly tell you if there is an issue. A vxprint for Veritas and a metastat for DiskSuite will show you what you have setup and if there are any recognized disk issues.

Window - No Disk error message after update to iTunes 7.1

I updated to iTunes 7.1. After turning on iTunes for the first time after the download, I get a box that says "Updating iTunes Library". During this process, I get the dreaded error message: "Windows - No Disk" I clicked on it a few times and it went away. Then it came back and no amount of clicking would make it go away. At this point, iTunes no longer responds. I have gone thru this process now about 5 times.
What is the fix?
Does Apple answer this issue anywhere or is it left to its customers to speculate about this stuff?
Thank you fellow consumers.
David
dell laptop Windows XP

Do you mean like it says Windows-No Disk in Drive, please insert a disk? That type of message?
Rachyl

Disk Error Message in Photoshop 5.0 LE

Hello,
I scanned an image at 1200 dpi (Windows reports the file size as 165 MB) and tried to open it in Photoshop and got this message:
Disk error –36 while reading or writing virtual memory file. Sorry, but this error is fatal.
I've tried changing the paging file size. I've set both my C drive and a partition (F) to 4096 MB. I also went into "Preferences/Plug-ins and Scratch Disks" and set the Primary and Secondary to the drives mentioned above, and still get the same error message.
What am I doing wrong? The only thing I can think of is that my computer is an older one (only a 500 mhz processor) but I don't think that should matter - then again I've never scanned at this high a resolution before either.....
Thanks!

I'm surprised PS even runs on that computer although of course 5.0 LE is pretty old.
A 165 MB file may just be too much for it.
How can you "set your c drive to 4096MB"? Do you mean Paging file?
We need someone with a long memory to chime in, but you do need to clarify what you are doing.

Keep getting "Can't Locate Disk" error message when installing software

Hi!
I'm trying to install some software on my PowerBook G4 . . . every time I follow this routine:
1) I insert the installation disk of the software.
2) Classic 9 starts up - I then get the folder on the disk with then install icon.
3) I toggle through 3 or 4 screens, agreeing to licenses, etc. - then . . .
4) When I click on the "OK TO INSTALL" button an error message appears and stops my progress - it reads, "Can't locate disk" - duh! We've been working off this disk for 5 minutes - the disk shows up on the desktop - I can locate the disk - why can't my computer? Please help me if you are able - thanks!

Thanks Bob! My problem was that I was following advice from elsewhere on the internet that said I should burn a DVD in UDF format when in fact just burning it using disk utility in ISO made it work. Thank you so much!

Disk error message in Organizer

Similar Messages

Maybe you are looking for