Disk format time capsule

I just finished installing and configuring my new time machine on my new iMac (I'm new of the AMc word...)
I've configured the network, I've started the time machines and, during the night, done the backup.
This morning I went on Utility disk and I sow the I cannot restore permissione on time machine volume because the permission are ignored?!?!
Is it normal?
Many thanks in advance

Schizzo Jo wrote:
This morning I went on Utility disk and I sow the I cannot restore permissione on time machine volume because the permission are ignored?!?!
can you paste the permission repair report here ?
however, most permissions repair error messages are nothing to worry about. see _*permission repair messages you can safely ignore*_.
as long as you see +permissions repair complete+ @ the end, you're in the green.
JGG

Similar Messages

Mac Formatted Time Capsule w/ PC Formatted External Drive Via USB?

I use a Mac-formatted Time Capsule to run Time Machine backups on my MacBook Pro. My wife backs up her PC laptop on a PC-formatted Western Digital "My Book" hard drive which is powered via A/C wall adapter. I connected the Western Digital PC drive to the Time Capsule via USB so it would be available on our home network and my wife could run her PC backups wirelessly, BUT the drive is not showing up on our network. Anybody have any idea what I'm doing wrong?
Thanks in advance!
---Tim

My questions continue below in red. Thank you for your patience.
LaPastenague wrote:
Tsac77 wrote:
Thanks for the in depth clarification. A few follow up questions:
1) Are you saying that even though I am only using the TC (in this instance) to make the windows drive available on the network, the drive still needs to be formatted in HFS+?
HFS+ or FAT32.. the later having severe issues with large disk and large files.
Great. I'll do HFS+
2) If I format the windows drive in HFS+, will the windows laptop be immediately able to write/read to it over the network? Or will I have to install some sort of program on the windows laptop that allows windows to read/write to HFS+ (which I've always undewrstood to be a mac only format)?
The format of the disk connected to a NAS is totally irrelevant.. if it offers windows networking file protocol.. ie SMB then it can store files on the hard disk.. it is just like sharing the disk in the Mac.. you can write to that directly from the PC. Try it.. The disk is controlled by the Mac. But it presents SMB to the Network.. On your Mac, go to system preferences.. sharing.. it should be in Internet and wireless.. but on Lion I have no idea. Open file sharing which should be ticked..there should be a public folder by default.. you can add others.. go to options, turn on SMB.. then from the windows computer you should see the disk available in networking. If not fix the names to SMB standard.. you will need to do this on the TC as well.. short, no spaces.. pure alphanumeric names. Copy some files from windows to your Mac.. you have now copied to a network drive.. with the drive format totally irrelevant to your windows computer.
I'm sorry, but I don't know what "windows networking file protocol" and "SMB" mean. Also, when you say "NAS" are you referring to the Time Capsule or another device? Can you please explain things like "The disk is controlled by the Mac but it presents SMB to the network" in a less advanced way. Pretend I'm a child. You won't be far off. It seems like this technique you're explaining is a way for the windows PC to write to the external drive via my MacBook. Is that even close to correct? The setup I must create needs to work regardless if macbook is on/off/out of the house.
3) Does plugging a USB drive into the TC never work properly or is this just a semi-common problem that happens sometimes? My odds of success will probably dictate whether I try this or not. I already own the windows USB drive and would like to avoid buying more hardware if possible.
It is problematic enough that I recommend you try it before committing to it. Even if you have to copy the files off to another location and then reformat the drive. Test it for a couple of days.. the issue happens especially when you are using Lion.. but will also happen with windows. Especially when the disk spins down it will not spin up again and become available to the network.
Got it.
4) What do you mean by files being in "native format"? And what does a dead TC have to do with whether or not they can be recovered to the windows laptop? If the TC dies, can't I just plug the windows USB drive directly into the windows laptop and it will be the same thing as connecting the drive and laptop via network? How does a dead TC make things more difficult?
Thanks for your continued help.
HFS+ is not windows native format... so files stored by the TC on the USB drive.. when the TC dies.. they all die eventually may be difficult to recover unless you plug it into another TC.. as the PC cannot natively read them. If you format FAT32 then the windows computer can read it.. just there are other issues. eg the disk can be slow.. very slow and it has far less protection. eg a power failure can corrupt the drive.. this was an issue before we moved in windows to NTFS.
Why do you say "files stored BY THE TC on the USB drive" Why is the TC storing files on the USB drive? Isn't plugging the USB into the TC just making the USB available on the network to my windows laptop? Why is the TC storing files?

Can I connect an external hard disk to time capsule? I tried but it doesn't show up. What would be the reason??

Can I connect an external hard disk to time capsule? I tried but it doesn't show up. What would be the reason??

The USB drive must be formatted for Mac in Mac OS Extended (Journaled), or if you want to use both Mac and Windows files, the drive can be formatted in FAT32.
A number of drives are formatted for Windows only in a format called NTFS. This willl not work on the Time Capsule.
In addition, the USB port on the Time Capsule is under powered. You almost always have to use a powered USB hub when you connect a drive to the Time Capsule...even if the drive has its own power supply.

HT1175 How do you back up additional hard disks to time capsule? Which disks etc. to you choose?

How do you back up additional hard disks to time capsule? Which disks etc. to you choose?

I can read your question a number of ways.
If you mean a disk plugged into your computer you wish to include in Time Machine backup.. just make sure it is HFS+ formatted and remove it from the exclusion list in the TM preferences.
If you mean a disk plugged into your TC for backup,
You can plug a USB disk into a Time Capsule as long as it is compatible.. and the disk is formatted HFS+, ie Mac OS extended Journaled.
You need a USB powered hub if you want to use multiple hard disks and even one might still need a hub.
Not all external drives are recogised but for example the Touro Deskpro works fine.
You can buy them up to 4TB.. how much added space do you want.
Also notice that USB 2 on a TC or AE is slow.. I mean half the speed of the same disk plugged into your computer so consider if speed is relevant to you.
You cannot use TM to backup network disks.. again I am not 100% sure what the question means.

How to connect my new MacBook Air to a LaCie hard disk with TIme Capsule backup from my old Imac? LaCie has USB 2.0, FireWire and eSata ports.

How can I connect my new MacBook Air to a LaCie hard disk with TIme Capsule backup from my old Imac? LaCie has USB 2.0, FireWire and eSata ports.

You can direct connect your MBA to the LaCie via USB 2 cable. If you have an Apple Airport Router you can USB connect the LaCie drive to the router and then use Airport Utility to configure it. Time Machine can access it either way.

I am using a macbook pro with system 10.6.8. I just discovered that no recent files have been backed up to the external disk using Time Capsule. There is a long list of backups including most recent but no recent files, for some weeks, have been backed u

I am using a macbook pro with system 10.6.8. I just discovered that no recent files have been backed up to the external disk using Time Capsule. There is a long list of backups including most recent but no recent files, for some weeks, have been backed up. I did a full reset of Time Machine. I disconnected the external drive and reconnected it. It is not a matter of file types, no files and no folders have gotten backed up. Everything looks normal though unless one goes hunting for recent files on the back up.

Many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

Missing disk in Time Capsule

Hi, everyone.
This is my first post. I bought a 500G Time Capsule April 2008 and suddenly I cannot mount my disk when my Time Machine is doing a back up.
I contact my local distributor and what they told me is that Apple would replace it with a new one.
My concern is how to recover my files.
Please provide some ensights.
Thanks

dveyra,
Actually, I don't think you have a problem. You are not suppose to be able to mount the TCs hard disk during a backup since it is "in use" during the backup process.
You see, the Time Capsule is not your ordinary external hard disk. It is a Network Attached Storage device. (NAS). As such, it operates best when it is doing one thing at a time. That is why it's not a good idea to store other files/folders on the TCs hard disk other than the Time Machine backups.
*Using a Time Machine Hard Disk (or Time Capsule) for Other Files*
Here is Apples’ line on this: “Time Machine works best if you use your backup disk only for Time Machine backups. If you keep files on your backup disk, Time Machine won’t back up those files, and the space available for Time Machine backups will be reduced.” [http://docs.info.apple.com/article.html?path=Mac/10.5/en/11430.html]
This hasn't stopped some from successfully partitioning Time Machine hard disks and storing data on the other partition. As long as the Time Machine backup has its' own partition, you avoid any potential opportunities for conflict.
However, this is not an option for Time Capsule users as there is no easy way of partitioning the Time Capsules’ internal hard disk without elaborate effort. Granted, the Time Capsule is advertised as being able to perform both as a Time Machine backup destination and as a shared network drive.
Nevertheless, some have experienced problems with maintaining files/folders occupying the same disk as Time Machine backups. In this case, they use the Time Capsule hard disk solely for Time Machine backups. Then attach an external hard disk to the Time Capsules USB port and store additional files there. This added disk will still be available to all Macs that can access the Time Capsule. (Note though, that any USB disks attached to the USB port of the Time Capsule can not then be backed up to the Time Capsule via Time Machine. Time Machine will only backup your Macs internal hard disk or any external hard disks physically attached to the Mac. Time Machine can not backup one remote device to another remote device.)
Hope this clarifies things.
Cheers!

Why can't I use iDisk for a back-up disk for Time Capsule?

G'Day All,
I am new to apple and mostly am loving it! Being new to this product has me asking some basic questions, like ... why can't I use iDisk for a back-up disk for Time Capsule?
Here I have something like 20 gb disk space available, but it seems I need to buy an external hard drive (or an airport) in order to use, what I believe is one of apples greatest inventions, the Time Machine...
Can anyone correct my flawed understanding or, better yet, teach me how to do it properly?
Cheers
Gabriel

Gabr1el wrote:
Thank you Pondini.
Speed makes sense, but I thought I had plenty of size available ... never mind! Looking over some of the other posts, it looks as though I'd be better off with an external Hard drive than the Apple Time Capsule (if I want more than 12-18months service).
That was true of some of the ones made a couple of years ago (many of which Apple replaced way beyond the warranty period, and even some beyond the 3-year AppleCare period). Presumably Apple has fixed the power supply problem in the newer units, so they'll last longer.
If you don't have AppleCare for your Mac, I'd strongly suggest buying it. If you do, and buy a TimeCapsule, Airport, or other accessory within 2 years, it's covered, too.
But unless you need a wireless router, yes, paying for one in a Time Capsule doesn't make sense. A good external HD is a much better buy.
thank you for the links - I am still getting used to the way Apples work ...
If you haven't found these yet, you may find some handy tips here: http://www.apple.com/support/switch101/
here: http://www.apple.com/support/mac101/
and some of the other videos listed on the Time Machine Tutorial page.

Cannot access disk in Time Capsule after updated to 7.4.1

I have a macbook pro and a PC(MS Vista), both connect to the Time Capsule via LAN.
After I updated the Airport Utility to 7.4.1 in PC several days ago, I could never access the disk in Time Capsule via PC, it always said "Unknown user, incorrect password, or login is disabled. Please retype the login information or contact the disk's administrator". However, everything is fine when I use macbook to access the disk.
I tried to reset the password, tried to access with disk password or with accounts, but nothing worked.
Whatever the password I changed to, it always show the same dialog.
Thank you for your helping!

I had the same problem.. Updating to 7.4.2 seems to have solved the problem, for me anyway. There seem to be a lot of posts about people noticing network slow downs. Can't say I have, but currently I can't access my printer attached to the USB port on my TC from my PC. My iMac can print to it no problem. Bought printer after update installed. If someone can point me in the right direction of solving that problem that would be great.
Cheers

How to connect an external disk to time capsule?

Hi,
I've just connected my new external disk 2TB to the time capsule device. However, it doesn't show in the disk tab in Airport express. Yes, of course the disk is on, it's hfs+journaled formatted and works fine when connected directly to my usb port on my MacBook Pro.
Any suggestion, please?
Thanks.

Unless this is a really new feature, Airport Express doesn't support external USB disks; only USB printers.
The Wireless-N Time Capsules and Airport Extremes support external USB disks.

How to back up a external hard disk to time capsule?

I have a external hard disk (WD passport Mac OS extended format) connected to iMAC (OS X 10.9.3) through USB. How can I back up the hard disk to my time capsule (802.11ac 2TB)?

By default, the name of the hard drive will appear on the list of Excluded items when you open System Preferences / Time Machine / Options.
Click on the name of the hard drive to highlight it, and then click on the - (minus) button at the bottom of the Exclusions list to remove the drive from the list of items that are Excluded on backups.
Time Machine will back up both your Mac and the hard drive on the next pass.

How to format time capsule?

Could someone give me some hints on how to re format a time capsule which is running and backing up but that I would like to change configuration?

You do not generally need to format to change configuration.. they are two separate things.
Reset works on the router side.. read the various methods to reset a TC or AE.
http://support.apple.com/kb/ht3728
For the internal hard disk you erase it via the Airport Utility..
Erase is actually format.
On the disk page of whichever version utility you have, select erase.. you are offered several levels of erase.. all except quick erase will take hours, days, even weeks.. Quick Erase is same as quick erase in OS.. it wipe the file allocation table only.. takes a min or two.. but not secure meaning files can be recovered. At least until you write new files over them.
In the latest utility.. find the disk page and erase here.

Formatting Time Capsule via USB???

I am trying to format my 500GB Time Capsule as I intend to use it on my wireless network as storage for movies/music etc (using my PS3 as a media server). I understand it needs to be formatted to FAT32 in order to work with the PS3 and that I format the TC using the Disk Utility on my MacBook.
I have had the TC connected via either USB, ethernet and wireless, but the TC does not appear in the Disk Utility window, therefore I am unable to format. I have no problems connecting to the TC via wireless or ethernet in order to backup data. The TC doesnt appear when connecting via USB to my MacBook. Am I doing something wrongly?? Please help. Thanks

I am trying to format my 500GB Time Capsule as I intend to use it on my wireless network as storage for movies/music etc (using my PS3 as a media server).
The Time Capsule's format doesn't matter because all input/output to it is handled by the Time Capsule itself. Check the PS3's documentation to see if it can access network drives.
I format the TC using the Disk Utility on my MacBook.
That's not true. Use the AirPort Utility to format it; you're limited to the options it offers. The Disk Utility doesn't work on network drives.
I have had the TC connected via either USB, ethernet and wireless, but the TC does not appear in the Disk Utility window, therefore I am unable to format.
See above.
The TC doesnt appear when connecting via USB to my MacBook.
Its USB port isn't for a computer connection. It's for external hard drives and printers; any external drive connected to it is treated the same as its internal drive with regards to network availability.
(53802)

Cannot Access Disks on Time Capsule Since Upgrading to Mavericks

Hey folks...
So I've had this set up for several years, and it's worked out well. I have a time capsule with an external (self-powered) harddrive connected to it via USB. I usually access it via ethernet as the connection is more speedy than wifi, and my laptop generally remains stationary. For what it's worth, I'm using a Macbook Pro (mid-2010), with the original time capsule (500gb) as well as a connected Western Digital (1tb) external harddrive.
Since upgrading to Mavericks, however, I have not been able to consistently access the remote disks, either by wifi or ethernet connection. The time capsule shows up under my "shared" section of the finder window, but the drives (which are usually visible and accessible from within the time capsule) are not there. Strange enough, when I go into my Airport Utility for Time Capsule preferences, the disks are visible under the "disks" section.
The time capsules' firmware is up to date, as well as the laptop's. I have tried reseting the time capsule as well as my computer in addition to simply unplugging/plugging it back in. I was able to access the disks on a fluke once in the last few days, but after moving the computer away from it's standard spot, the disks are once again no longer accessible.
I had Server 2.0 but am unable to use it since upgrading the OS and haven't purchased Server 3.0. Any suggestions for solutions? Could residule configurations having to do with the Server functionality be affecting it? I'm guessing it is something to do with Mavericks. Thanks for any help or feedback.
Mitchel

I don't have a guaranteed solution to your problem, just some suggestions:
1) Try powering down the Time Capsule for at least 15 minutes, then plug it in again and see if it works better.
2) If you suspect that heat might be a problem, try raising the Time Capsule to give better air flow below it. I have mine on an inverted plastic-coated-wire basket of the type used to organize kitchen drawers.
3) If AirPort Utility can "see" the Time Capsule, you should be able to use the "archive" function (in the Disks panel, Disks tab) to write the disk's contents to a drive connected to the Time Capsule's USB port.
4) In the worst case, you should be able to access the files on the Time Capsule's disk by opening up the Time Capsule, removing the disk drive, mounting the drive in an external enclosure, and attaching the enclosure to your Mac.

Disk Utility hangs ("not responding") when attempting to Repair Disk on Time Capsule sparsebundle. Help.

I am trying to improve the performance of my Time Machine backup and retrievals via my 2nd Gen. Time Capsule from my iMac Core 2 Duo hard drive with SL 10.6.8. The incremental backups generally take 20 - 40 minutes each hour generally with fewer than 100 MB of data being backed up. I have read through numerous threads on these forums about Time Capsule and Time Machine issues as well as the very helpful Pondini site (http://web.me.com/pondini/Time_Machine/Home.html) and have tried many other suggestions (listed below), but have been unable to attempt a Disk Utility repair disk on the Time Capsule sparsebundle file.
After locating the sparsebundle 'file' in the finder under Shared/TC/Data, I am only sometimes able to drag the sparsebundle into the Disk Utility volumes and disk window. About fifty percent of the time, Disk Utility hangs when attempting to drag in the sparsebundle. If I am able to get it listed and click on "repair disk", then the beach ball begins to spin and nothing happens. This occurs whether or not I first use AirPort Utility to "Disconnect All Users" from the Time Capsule. I have given it over one hour to attempt the repair disk, but nothing happens, i.e., not a single message shows up in the detail window. The beach ball just spins, and Disk Utility shows up in red as "not responding" under the Force Quit menu.
Also note that on my new Macbook Air, Time Machine runs quite quickly via this same Time Capsule from my new Macbook Air using OS X Lion (which seems to indicate that the Time Capsule drive itself is OK).
I would appreciate any tips on getting Disk Utility to run "repair disk" on my sparsebundle, as I seem to have exhausted most other options (see below) for improving Time Capsule performance -- aside of course, from wiping the Time Capsule clean and starting all over.... (which I really don't want to do, and from what I've read, has not helped some people who've tried this anyway).
Many thanks!
Although I would like to focus this thread on the Disk Utility / sparsebundle "Repair Disk" problem, I should mention that I have tried the following other things:
1. Repaired disk permissions on my hard drive
2. Used Disk Utility to run "repair disk" on my hard drive after starting up from a SuperDuper external backup
3. Run DiskWarrior on my hard drive, again, from a separate startup disk
4. Did the "full reset of Time Machine", a la Pondini Troubleshooting #A4
5. Changed my computer and Time Capsule names to simple short names with only alphanumeric characters and no spaces
6. Ensured that my Time Capsule is being accessed only via ethernet
7. Relaunched the finder
8. And finally, attempting to use Disk Utility to repair the sparsebundle - thus the nature of this post

OK, no takers out there, but I answered my own question (sort of).
The answer is that even though Disk Utility shows up as "not responding" under the Force Quit menu and appears to hang, it is actually still working. A bit of patience shows that after about an hour, my Disk Utility was able to show the 1.44 TB Time Machine sparsebundle from Time Capsule in the disk window on the left hand side. Once this appeared, I was able to click on "Repair Disk" (note that prior to doing this, I had to "Disconnect All Users" from my Time Capsule using the Airport Utility program; otherwise you will get a "could not unmount disk" error). Again, the Repair Disk function appeared to hang Disk Utility as it showed up as "not responding" under the Force Quit menu. However, after about 8 hours, Disk Utility did run the entire Repair Disk protocol on the sparsebundle. The results DO NOT show up in the Disk Utility details window - so even if you are patient enough to let it complete, you will not see anything and may think that nothing happened. However, you can find the familiar results of the Repair Disk function by looking on Console - find the "DiskUtility.log" under Files: ˜/Library/Logs.
Unfortunately, I was hoping to find a problem that would have been subsequently repaired which would result in dramatically increased Time Capsule speed, but this was not the case. Disk Utility showed everything to be "OK" and I am stuck with a very slow Time Capsule....
(And of note, my new Macbook Air (OS Lion) Time Machine functions blazingly fast on both backup and retrieval to and from the very same Time Capsule - even though, these are occuring wirelessly via AirPort -- granted the size of this sparsebundle is an order of magnitude smaller at this point, i.e., only 10 GB right now)
Would still be happy to hear of any similar experiences or tips on getting Time Capsule to work more quickly.

Disk format time capsule

Similar Messages

Maybe you are looking for