Disk full error message! But disk is not full!!!

I kept having this message "The disk is full trying to write to Macintosh HD. Free some space on this drive, ..." while working on Microsoft Word for Apple. But I have check on my Macintosh HD and there is still plenty of available space. What is wrong???

I'm getting the same error. I tried to purchase a movie and iTunes told me I didn't have enough store credits, even though I was attempting to use my credit card. I finally was able to click the 'buy now'; but now it won't download the movies, giving me the same error and a message window which states:
There was a problem downloading "x movie".
The disk you are attempting to use is full.

Similar Messages

"Not Enough Free Disk Space" error message, but Finder shows plenty of disk space available

Apologies if this is a double post, but I have been searching all over and can't seem to find this issue in the forums.
I have a 256GB Macbook with a fresh copy of Lion installed, am going through the process of migrating files back over, after which I have approximately 125GB free. However, whenever I go online and try to download any type of file (PDF, sofware install files, etc.), an error message displays saying:
Safari could not download the file “blahblahblah.dmg” because there is not enough free disk space.
Not sure how this is possible since the .dmg file is 18MB and Finder is saying there is over 125GB free. I've tried repairing disk permissions, booting off the Lion recovery disk and repairing the startup disk, all to no avail. Anyone had this issue before?

Don Archibald wrote:
Check in Safari's Preferences (in the Safari menu) to see what has been designated as the destination for downloads. If that has somehow been set to a disk image or a CD/DVD location, you'll get that 'not enough space' message.
The same may occur if the download target location is set to a non-available drive. This can happen when aliases are used and things have been copied (migrated) from another drive.
Thanks for the suggestion. That wasn't the problem, but your suggestion did shed light on something else. I was able to perform a right-click action and Save File As... to my Documents folder. On further analysis, it appears that the "Macintosh HD", Downloads folder, and Desktop are showing the "pencil with a line through it" icon in the bottom left of the Finder window, which would suggest those areas are read-only for some reason.
My user account is the only one on the machine and it's an admin account. Any guesses as to why that might have set itself that way, or any suggestions on how to change it? I've already tried repairing permissions on the startup disk in Disk Utility.

Startup Disk full error message but free space shows 87GB

Hi I have looked through these forums as much as I could but can't find the answer to this. I was working in photoshop CS6 and received the message that my startup disk was almost full. I had just cleared files the day previous and had 87GB of free space. So I restarted after emptying trash etc and tried to get back into photoshop but had the same message, checked my free space and it said 2gb. So I began my search here and saw the issue with .OfflineCache in mail but was never able to locate that file on my computer and after trying several things and failing I checked the info on my Mac hd drive again and it was back to 87gb yet message still coming. I have 8 Gigs of Ram, a 321 Gb hard Drive and running a Mackbook pro 13" with Mac osx Lion 10.7.5. Mid 2010.
Please Help!!

Hi,
I would try using GrandPerspective (http://grandperspectiv.sourceforge.net) to try find out where all the space is being taken up.
Chris

After writing an html report on a floppy disk and removing it, labview shows an error message window: disk not present

after writing an html report on a floppy disk and removing it, labview shows an error message window: disk not present.
My pc is based on asus motherboard. Labview 7 and Windows 2000 sp4 installed.
The error message continue also if i stop the application that generated report on a: .
I've got this problem only on a pc: on other machines i don't have this problem (Labview only continues to access floppy but it doesn't show any window).
Find below an example: first press the button to create a report on a: then remove the floppy, after 30-35 sec i've got the error message
Attachments:
prova.vi ‏55 KB

Hi,
I tried your vi: I don't get any error message after removing the disk but LV7 keeps on accessing the drive at regular intervals even if you stop the vi and close it!!! This is not supposed to happen.
The only way to stop it is exit LV7.
If you don't use the file dialog and you wire a full path, you don't get any problem.
I also created a very simple vi that conditionally writes a text file on a: and I got the same behaviour.
This problem occurs only with LV7, I tried the same examples in LV6.1 and everything was fine.
If anybody wants to try I attach this simple example,
Alberto
Attachments:
salva_testo1.vi ‏22 KB

I am installing Windows 7 on my macbook pro OSX Mountain Lion and I get an error message:" Your disk could not be partitioned." What does this mean?

I am installing Windows 7 and I get an error message: "Your disk could not be partitioned. An error ocurred while partitioning the disk". I was using a Windows & Home Premium OEM Software that I purchased from Microsoft. I was given to Windows 100GB to use for Quickbooks pro, Payroll and Publisher. I have the Macbook Pro model No: MD102LL/A. Does anyone knows what happenned or can advice me in what to do? Please help!!!

amarilysfl wrote:
"Your disk could not be partitioned. An error occurred while partitioning the disk".
https://www.apple.com/support/bootcamp/
If you were using Apple's BootCamp and received this message, quit it and open Disk Uility in your Applicaitons/Utilities folder.
Select the Macintosh HD partition on the left and select Erase and Erase Free Space > Zero option and let it complete (important) this will check the spare space for bad sectors that can cause issues formatting partitions.
Once it's completed, try creating a partiton again in BootCamp.
If that doesn't work, then hold command option r keys down while connected to a fast internet connection, Internet Recovery should load (spinning globe) and then in that Disk Utility, select your entire internal drive and click > First Aid > Repair Disk and Permissions.
reboot and attempt Bootcamp again.
If you still get a error, it might be that you have OS X data on the bottom area where BootCamp partition needs to go. This would occur if you had the drive or computer for a long time or wrote a large amount of files to the drive and nearly filling it up and then reduced some, but it left traces in the area BootCamp needs to go.
To fix this
BootCamp: "This disc can not be partitioned/impossible to move files."
How to safely defrag a Mac's hard drive

After getting the dreaded gray/blue screen, I tried to run disk repair on the internal disk. I got an error message saying "Disk Utility can't repair this disk and restore your backed-up files. The volume Macintosh HD could not be verified completely

After getting the dreaded gray/blue screen, I tried to run disk repair on the internal disk. I got an error message saying "Disk Utility can't repair this disk and restore your backed-up files. The volume Macintosh HD could not be verified completely." What do I do now? This is an iMac and I'm running 10.6.8.

Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it. See below for how to clone a drive.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. Be sure you configure your initial admin account with the exact same
         username and password that you used on your old drive. After you finish Setup
         Assistant will complete the installation after which you will be running a fresh
         install of OS X. You can now begin the update process by opening Software
         Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
You may be able to backup your data if you have an erased external drive you can use. Before you do the above but after you have opened Disk Utility you can try to clone your drive:
Clone using Restore Option of Disk Utility
1. Open Disk Utility.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Select the destination volume from the left side list and drag
       it to the Destination entry field.
5. Select the source volume from the left side list and drag it to
      the Source entry field.
6. Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
Now this will only work if the drive is accessible and can be cloned by Disk Utility. Otherwise, you would need to access your drive from another Mac that you can connect via Firewire - Target Disk Mode.

I've been getting the error message "The disk you inserted was not readable by the computer". I can't open system preferences, disk utility, or Time Machine. I'm guessing it has something to do with my external hard drive, although it hasn't been touched.

I've been getting the error message "The disk you inserted was not readable by the computer". I can't open system preferences, disk utility, or Time Machine. I'm guessing it has something to do with my external hard drive, although it hasn't been touched lately, but I can't figure out how to solve the problem. Any suggestions? Thank you!

Thanks for your quick response. I had a look at your discussion... I tried it on a Windows machine and I thought that was compatible with ExFAT?
Therefore I need to attempt to use my external hard drive with a machine that boasts OS X 10.6.5 or above and then it should work?
Thanks

Disk full error message?

stuff, this site has issues.
Okay, what I need to know is why I am getting a "disk full" error message when I try to save photos. This has only started to happen and my disk drives have plenty of space left on them.

Thanks, but what is the Scratch disk set?
Regards,
Gordon Johnson
m: Silkrooster [email protected]
Sent: Monday, 15 July 2013 2:55 PM
To: GKJohnson
Subject: disk full error message?
Re: disk full error message?
created by Silkrooster <http://forums.adobe.com/people/Silkrooster> in Photoshop for Beginners - View the full discussion <http://forums.adobe.com/message/5505558#5505558

An error occurred while executing batch. Error message is: There is not enough space on the disk.

Hello all,
I execute a T-SQL query, which will retrieve large amount of data, however, I get an error message after a few seconde.
The error message is :
An error occurred while executing batch. Error message is: There is not enough space on the disk.
Who can tell me the reason and waht's the steps to solve this issue ?
Really thanks.
Thanks, Jed deng

The other two posters suggested that the problem with tempdb or you data/log files. This is not the case here. The error message relates to the client-side of things. Apparently SSMS needs to store data on disk. I don't recall exactly when this happens,
but I seem to recall that the files appear in you %TEMP% directory.
I would suggest that your correct action is to clean up the disk. Not the least there may be a lot of junk in your %TEMP% and %TMP% directories.
Erland Sommarskog, SQL Server MVP, [email protected]
Thanks Erland, I was not aware of this earlier. Now, I am able to find out one of the resons for slowness of SSMS gird. Also, I have just checked it with process monitor, SSMS is creating tmp%.tmp files..
- Chintak (My Blog)

After updating my MacBook Pro to yeosemite I want my old screen saver picture back. I did a full back up before the install. I found the "Settings" folder in Time machine but when I try to open it I get an error message saying "You can not open this

After updating my MacBook Pro to yeosemite I want my old desktop picture back. I did a full back up before the install. I found the "Settings" folder in Time machine but when I try to open it I get an error message saying "You can not open this folder. It is in TimeMachine".

Can you browse the Time Machine drive from Finder?
If you can and you know where the picture was stored ie on your desktop you can browse through the folder structure to the picture copy it and paste it somewhere on your new install before right clicking it and 'set as desktop background'

The error message "Scratch disk is full" when trying to create

the error message "Scratch disk is full" when trying to create a image/logo in Photoshop CS6

Hi Weed42,
This has been discussed in the following forum links:
http://forums.adobe.com/thread/1164997
http://forums.adobe.com/message/4968658
Let us know if this helps,
Regards
Gurleen

I am receiving a backup error message" ther backup was not performed because an error occurred while copying files to the backup disk"

I am receiving an error message: " the backup was not performed because an error occurred while copying files to the backup disk". I have used the Disk Utility tot "Repair Disk" and it appears that there are no problems with the back up file..
I continue to receive the error message. What can anyone suggest I do?

One of Apple's less-than-informative messages.
Most likely, there's a damaged file on your system; see #C3 in Time Machine - Troubleshooting. It will show you how to locate the message(s) that describe the problem, then help you fix it.

I keep getting this error message "Time Machine could not complete the backup. 'The backup disk image "/Volumes/FreeAgent Drive/MacBook Pro.sparsebundle" is already in use." What should I do to remedy this?

I keep getting this error message: Time Machine could not complete the backup. 'The backup disk image "/Volumes/FreeAgent Drive/xxx MacBook Pro.sparsebundle" is already in use.
How do I remedy this so it starts backing up again?

Maybe this http://web.me.com/pondini/Time_Machine/C12.html can help you.
Stefan

I downloaded my CSDesignWebPremium and when I tried to mount the disk--an error message said "DesignWebPremium,_CS6_LS16.dmg" not recognized

I downloaded my CSDesignWebPremium and when I tried to mount the disk--an error message said "DesignWebPremium,_CS6_LS16.dmg" not recognized
(I am using a MAC 2.6 GHz Intel Core i7 (16GB 1600 MHz DDR3) OSX 10.7.5)

Squasha9 it would appear that the DMG you downloaded is corrupted. Where did you download the installation files from? You can download a copy of the installation files from Download CS6 products.

I can't connect to Time Capsule- error message: Backup disk is not available. Was working fine before.

I can't connect to Time Capsule- error message: Backup disk is not available. Was working fine before.

Restart it.. Does this all the time with Lion and even worse ML.
Restart the whole network if that doesn't work.. do it in correct order.. from off.. modem.. TC.. clients 2min gap.

Popping error message "The disk was not ejected properly"

Although I am rejecting my external hard disks, still when I unplug them the error message "The disk was not ejected properly" pops up.
Worth to note that disks are not in sleep.
My McPro is running OS X Lion.

I've been following this issue for a long time on one of the other Apple forum discussions. A suggestion was made to install an app called Jettison (by St. Clair Software). Since doing this two days ago, I have not seen the infamous "improper ejection" error message. Jettison seems to do, automatically without any effort on my part, exactly what the developer says: "Jettison eliminates the hassle of manually ejecting external drives before you put your MacBook to sleep and remounting them when it wakes."
By automatically unmounting my two external USB drives when the computer goes to sleep, Jettison is eliminating the opportunity for Apple's faulty USB power management system to improperly eject my external drives. As soon as my computer wakes up, Jettison quickly remounts the external drives. And, most importantly, Jettison has NOT caused any conflict with my Time Machine backups or my SuperDuper clone backups (three of which are scheduled to run automatically at 1:00am every night.
See: <http://stclairsoft.com/Jettison/index.html>

Disk full error message! But disk is not full!!!

Similar Messages

Maybe you are looking for