Disk Full on Zen 2GB with 1,70GB of space le

Hey everyone,
I have a Zen 2GB and when I try to rip songs of a cd onto my Zen, it says the disk is full and I should make more room on my computer(?).
In the Creative Audio CD ripper I did not select the option to rip the files to my computer and on my Zen is still ,7 GB left!
I searched the forums, but couldn't find a solution there.
I also tried a full format, a reset of the settings and a firmware upgrade, but nothing seems to work..
Please help me out, all suggestions are welcome!
Thanks.

Nope, that didn't work either..
It is also quite strange that the cd ripper talks about "Computer" as the location being full. The only option checked is to copy the ripped music to the Zen music device and NOT to the computer (eitherway; there is also plenty of space on my computer).
I completely removed and reinstalled the Creative software, but that also didn't help...
Message Edited by Wesko on 04-23-2008 06:32 AM

Similar Messages

  • PS7 and Scratch Disk Full, using XP SP3 with 1 HD... how to fix?

    I've searched the forum, yet couldn't find an answer or fix...  I installed my old PS7 on my new computer running XP with SP3 on a dualcore Intel, 1.5T HD (only one drive), 3Gb of RAM-- not enough money to upgrade PS, computer took first dibs...  PS7 refuses to open - after booting, comes up with a pop-up error stating the Scratch Disk is full, then shuts down.
    My old system (W-2000, 20Gb single HD, with 1.8 Pentium processor, 1Gb of RAM) worked perfectly with PS7 - never had any problems...
    I've tried all fixes possible...  HD is not even close to fragmented as is a new drive; not enough programs installed yet, or use on machine, for disk clean-up to be necessary; forced creation of the preference file (changed name to .old); and did the ctrl-alt-shift to boot to defaults.  No idea what is going on or why it would say scratch disk full.

    Uaphil wrote:
    Actually, there are no partitions on my drive.  (I didn't realize PS needed a different drive or partition)  My old computer and HD didn't have partitions either, and worked perfectly.
    Could it be an issue with PS7 and the size of the HD?  If so, is there a patch for this?
    The point isn't that Photoshop needs different drives or partitions but that, as you suggest, the old PS 7 has problems with drives much bigger than were imagined in the days it was written.
    However there are advantages in having the the scratch disk on a separate physical drive from the system drive where the paging file normally resides.

  • Info about zen 2gb with sd s

    I'm studing about this mp3 player to buy it but I have some question and I can't write to customer becouse it require a creative product serial.
    If I add a sd card windows see 2 different memory dri've?
    This mp3 can do random in different folder/sub folder or memory card if present?
    If I'm seeing a video and I stop it, play mp3 or off the player, after, when restart video player the video restart?
    thank
    stefano

    Hello
    I can just confirm what previous user has posted. Recovery DVD delivered with your notebook contains recovery image. Recovery image contains OS, all necessary drivers, tools and utilities. It also contains several different applications like WinDVD (for watching DVD movies) and Norton (make your notebook safe if you want to connect it to the LAN and use Internet).
    Every time if something goes wrong you can use delivered recovery media and install OS again. You can do this without any restriction and 1000 times if you want. Very important is that you do not need any registration by Microsoft.
    If you have more questions please write again. Good luck!

  • Keep getting startup disk full messages but I have plenty of HD space

    Hi all,
    I've been experiencing a odd problem on my 18 month old 13" MacBook Pro. As of last week, I keep getting the dreaded "Your startup disk is almost full" and "Your startup disk is full" messages, yet I have over 7GB of hard drive space available (in addition to 8GB of installed ram) seemingly at random times. I noticed this message come up immediately after a restart this morning, as well as when I woke from display sleep earlier today, but most of the day the messages pop up (sometimes it's "almost full", sometimes it's "full") every 30-60 mins or so. I then immediately check my available space and it reads a solid 7GBs.
    Any idea what's going on, or how I can fix this? I'd like to fully understand why this is happening so I can prevent it from coming up in the future.
    Thanks!
    Addendum: Ok, did a few restarts and it's confirmed: I get the "Your startup disk is full" message when my login screen appers, every time. Help!

    Mike Amin wrote:
    1. Since when have Mac users needed to adhere to the "10% rule"?
    Since hard disk's where built into computers regardless of Mac or others.
    10% is just a arbitrary value in a configuration file: Warn at x% - for at least three reasons:
    If a disk run full the system is not longer able to extend logfiles, configuration files, the Mac's equivalent for /proc or the swap space.
    This will cause the system to freeze and/or prevent the next boot.
    On shutdown the system could not write out the data buffered in memory to the disk.
    Thereby data may be lost or the filesystem corrupted as a result.
    Imagine your 7GB free and the system tríes on shutdown to write back 9GB RAM buffer ...**Do'h**
    For user safety. Imagine you have only 5GB free and you load a 7.5GB RAW image file into a application. **Do'h**
    Mike Amin wrote:
    4. Lupunus, you mention that "available space" is different than "true space". Can you elaborate?
    The displayed "Available Space" did not include the cached/buffered files, as to display that value the "sync" command get not invoked.
    The kernel keeps data in memory to avoid doing (relatively slow) diskreads and writes.
    sync writes any data buffered in memory out to disk.
    Lupunus

  • Export Error. Error compiling movie. Disk Full.

    I have the following error since CS6 when exporting some videos: Export Error. Error compiling movie. Disk Full.
    All my drives have plenty of space, NTFS 7200rpm, everything was fine with CS5.5. Same problem with Encoder or Premiere Pro.
    Much of the stuff I export is going fine but I have this error with some sequences and formats.
    It always crash to this error when exporting sequences with "Match Sequence Settings".
    For one of my projects, when exporting to wmv, out of 6 sequences one always crash to Export Error. Error compiling movie. Disk Full.
    If I encode those sequences to mpeg2, everything is fine.
    I installed the new update this morning but it doesn't help.

    Hi, since my last post there has been no activity on this thread, so...
    Has anyone found a workaround?  I find it incredibly inconvenient and unforgivable that I get this error when trying to export a movie in PPCS6 using "Match Sequence Settings".  Some facts:
    1. I always get this error when trying to export from PPCS6 using match sequence settings.  It happens with all movies.  Starting a new sequence doesn't change it
    2. I never get this error if I use another encoding option
    3. My disk is not full
    4. It happens whether I use software engine or GPU acceleration (and also if I delete the previews)
    5. It happens on both the PC and MAC versions of PPCS6.  With sequences created natively on each machine and imported one to the other.
    6. If I import the sequence into CS5, then hey presto, it works without error.  At the moment that is my workaround, but it is not at all acceptable that I have to do this.
    7. The sequences were all created in CS6.  None of them were imported from another version
    8. My source video is 1080p AVCHD footage
    Any further thoughts on how to deal with this really frustrating and crippling new bug in CS6 would be incredibly welcome.

  • Skype error: DISK FULL on macbook pro when signing in.

    Hey guys,  I've tried googling it but i'm only finding solutions for windows and none for macbook. When i try signing in to skype for mac, it displays the error 'Disk full'. My hard drive has plenty of space and it allows me to sign in with other accounts but just not with my main account. I've tried uninstalling it and reinstalling it but it doesn't work. What should I do? 

    ruwim wrote:
    Try to reset all Skype settings. Quit Skype or use Windows Task Manager to kill any Skype.exe process. Go to Windows Start and in the Search/Run box type %appdata% and then press Enter or click the OK button. The Windows File Explorer will pop up. There locate a folder named “Skype”. Rename this folder to something different, e.g. Skype_old. Next go to Windows Start and in the Search/Run box type %temp%\skype and then press Enter or click the OK button. Delete the DbTemp folder. Restart Skype. N.B. If needed, you will still be able to re-establish your call and chat history. All data is still saved in the Skype_old folder.OMG thanks so much dude, I have a call with a big name YouTuber and you really saved me. I appriciate the support so much!!!

  • Isn't 38133mb 40gb storage? I have a used 60gb zen xtra with 38133

    Isn't 3833mb 40gb storage? I have a used 60gb zen xtra with 3833mb total storage space/free space and I am under the impression that 60gb should be closer to 5833mb, correct? Can anyone help me to understand if this is correct? I just got this unit, I have a zen touch 40gb unit that has 3833mb as its total space allowed and the Zen Xtra 60gb I bought used ( but never used acording to the seller ) has the same storage. Customer support just send a couple of form replys to download new firmware and drivers which I did, but that did not increase the space ( which couldn't be possible, could it's The dri've is fixed space?) Sorry to be such a newbie? Thanks for any help. Marc

    Problem is the seller is on that auction site and has an explicit no return, no refund policy. I maybe able to go to squaretrade as he said it was new in opened box, and it was not new as his daughters name was on the settings part of the unit. It does say on the unit 60gb so I guess my next question is it possible for him to have opened the unit and replaced the 60gb harddri've with a 40gb? I also assume that this unit would not be able to be fixed or replaced under warrantee even though on his description a one year creative labs warantee is in place. I have the unit registered with creative and with the serial number. Does the hard dri've itself have a serial number on it's Thanks again for the help. Marc

  • Start up disk full message, how do i free up space?, start up disk full message, how do i free up space?

    Got a popup message 'startup disk full' - what do I do to create more space? My son tried to download some movies for me and there wasn't enough room...

    "what do I do to create more space?"
    Get rid of and/or archive files that take up space and/or you don't need. How much free space is left on the hard drive?

  • Hello to you all, my Macbook Air won's boot up and upon diagnosis, i realized my startup disk is full to 99% even with 2GB Hard Disk space. It wont also enable me boot into safe mode too. Please help as all my work documents and project files are on HD

    Hello to you all,
    My Macbook Air won's boot up and upon diagnosis, i realized my startup disk is full to 99% even with 2GB Hard Disk space. It wont also enable me boot into safe mode too.
    when i power up, i get this prolong gray screen which wont change screen but remain so. Infact i am handicapped.
    Please help as all my work documents and project files are on this machine and i can't afford to loose them all...
    Please, should you have any solution please send me the details to [email protected]
    Thanks you a millionh times.
    Al.

    The MBA seems to cause several problems to several users on boot ups
    On start up my MBA would not boot up the apple logo came on but only a blank screen appeared no fan i followed several start up recommendations but to no avail so I  took the MBA to the nearest Apple repair centre again the same symptoms on start up ......very sorry sir you need a new mother board that will be $500 not feeling confidant in the product declined and was going to put it on ebay for spares.
    On return home I pressed the start up button and it started normally everything was working fine i decided to reinstall all the software what has caused the problem I have no idea but it is after several attempted reboots it finally started on its own so don't give up if you have this problem it may come to life

  • Error message ''Disk Full' when trying to export with CS6, works fine in 5.5

    I get an error message when I try to export media in Premiere CS6 that I don't have in CS5.5
    I use export media for a AVCHD 60fps sequence with a few photoshop images on top of the main track. In the export settings I choose ''match sequence settings'' which gives me a .mpeg I- frame, 1920 x 1080 P, 60fps, quality 50, and a I tick the ''use maximum render quality'' check box at the bottom.
    It used to work fine but now I get a message: Disk Full where there is 1.5 TB free on the disk?
    I have the exact same sequence made in Premiere Pro CS 5.5 and it exports fine.
    It started to act weird after I used the queue for the first time and it went to the CS6 encoder.
    Since I used that once and it gave me that message for the first time, even when I try to do the same thing directly in Premiere CS6 , I always get the same error message.
    Question 2, is there a place to change the settings from 50 to 100 for the quality of this export profile?
    By the way I can export with other profiles without problems but this setting is the only one that I've seen that lets me keep my 60 frames per second in the export
    process. (Example: I can export this sequence in the H.264, 1920 x 1080, 30fps, high quality preset, using the maximum render quality in CS6)

    Hi Guys,
    Thanks for the input but if you read my message correctly and until the end I already can export to other settings and I want an answer to this problem. There's no logical explanation to why this suddenly wouldn't work with the same sequence that it used to do fine with and that CS 5.5 handles fine.
    As I said earlier this is the only setting that lets me export my sequence with the 60 fps, that I know of, for further and easier manipulation. As my main camera provides me with these 60 fps I'd really like to be able to have them left in that transition phase and, no, I'm not gonna give up until I know, really, what's going on and solve that problem. If this is a bug it needs to be fixed, if not I want to know what's happening.
    Also there's no answer to my question 2: Question 2, is there a place to change the settings from 50 to 100 for the quality of this export profile?
    So for you experts out there the question is still hanging.

  • Problem with my brand new mp3 player Zen Stone Plus 2GB ( with built in speaker )

    Hi .
    I have purchased the following Zen Stone Plus 2GB with built in speaker on 24.06.2008.
    From day one, it had a charging problem . Initial charging it'snever go beyond 87%.
    After using it for 2 days, at the time of recharging , I found my player won`t get dectected in my PC .
    I took the set to the vendor for a checkup . He tried to solve it by resetting , formating etc. But he could only able to to format it's sacrificing its 50% of its allocated space.
    My vendor then changed the set with a brand new one, againts that faulty one .
    Now the new one worked well for 3 - 4 days , but it is now totally dead .
    But the set did not give any indication before it become completely dead.
    A few dust particles inside the LCD screen was also observed. I can`t understand how come dust particles can enter inside
    a player which is sealed box pack .
    Next issue is with the battery which CREATIVE promised of giving a backup of approx 20 hrs of continious playback , which with minimal scuffling and with minimal settings lasted for 0 hrs approx ( 50% less than promised ).
    Another thing that i must state is the problem of FM Reception . It is simply terrible . In the same area where my mobile's FM reception is fine , Zen Stone's FM failed to give any reception .
    I came to know about Zen Stone Plus from of my friend , who is using Zen Stone Plus GB without any problem for long time.
    Pls tell me what to do now, since my player is compleately out of order now , and pls suggest me something regarding the issue of battery backup , FM reception ... etc.
    Now i am in a total mess . I just dont know what to do with the set that is few days old .
    Pls help urgently .
    Waiting for any valued suggestion .
    Bye ...

    Hi,
    I would suggest getting in touch with support, they might be able to help you with this.
    Go to the Support section of the website and select your product. On your right, click on Contact Us. You will be provided with a list of troubleshooting options. Click on the one closes to your issue. Go through the suggestions and if the does not work or you have already tried that, scroll to the bottom and click on No, escalate to email. This should bring you to the email form to contact support.

  • I get a message "could not initalize scratch disk full" I hae a new computer with Win 8 and I am installing PS 7

    I get a message "could not initalize scratch disk full" I have a new computer with Win 8 and I am installing PS 7. how can I fix the scratch disk problem? Thank you for the help.

    Are you saying that the Installation failed, or that Photoshop has installed but won't open?
    You say Photoshop PS7.  Is that a typo, or do you really mean the version that was released in 2002 and that preceded Photoshop CS?
    http://en.wikipedia.org/wiki/Adobe_Photoshop_version_history#7.0
    If you do indeed mean PS7, then I am afraid that is not compatible with Windows 8.1
    Windows Compatibility Center

  • HT4847 On startup my macbookair says start up disk full/delete some files. When I look at storage disk utility I see 51GB of a possible 60GB is used with Other. What is Other? and how can I view and delete some of these files?

    On startup my macbookair says start up disk full/delete some files. When I look at storage disk utility I see 51GB of a possible 60GB is used with Other. What is Other? and how can I view and delete some of these files?

    A MacBook will use Time Machine to make local backups so that when connected to an external drive it will backup a lot faster.
    to disable this, you must use a command under terminal.
    to locate terminal, do a search for it under spotlight (the magnifying glass on the top right corner), should be the first hit.
    once under terminal, type the following text exactly:
    sudo tmutil disablelocal
    hit enter.
    you will be asked to input your password, if you do not have a password, you will have to create one before performing this command. after entering your password, hit enter again and close terminal.
    in a few minutes the space taken up by time machine should be cleared.

  • Hard Disk Full Error With Plenty of Available Space

    Forgive me if this has been posted/asked here before I did a google search as well as tried to search the forum though maybe I had my phrasing incorrect.
    When I try to open my itunes I am getting an error saying that my hard disk is full and that I must make room available by deleting files.
    I'm running windows 7, my entire itunes library is kept on a Lacie 500G external hard drive with about 350G of space available for additional files so I'm not sure what the origins of this error are an, most importantly how to get it fixed.
    I tried a basic reinstall with no luck and am totally clueless here.
    Help.

    You need to have a read of the manual here -- you can specify affinities in Xsan and it's possible the default configuration is to fill specific folders first.
    It's not a good idea to attempt to manage Xsan without some training or knowledge of the product... this is how "bad things" happen. It's a complicated product which has been made to look simple -- but if you don't know how it works and how to manage it, it's best to not try and work the levers.
    I'd suggest reading the manuals, perhaps taking an Apple class, or at the very minimum getting the Xsan Quick-Reference guide from Peachpit press.

  • My macbook pro 13' was saying star disk full, i did recovery but its no working what can i do.....i check with R Comand and i can recover.....help:(

    My macbook pro13 was saying star disk full need free space....now when i log in gets a white screen...i did R Command and i cant rebbot now

    Hope this helps.
    1. Empty Trash.
        http://support.apple.com/kb/PH10677
    2. Delete "Recovered Messages", if any.
        Hold the option key down and click "Go" menu in the Finder menu bar.
        Select "Library" from the dropdown.
        Library > Mail > V2 > Mailboxes
        Delete "Recovered Messages", if any.
        Empty Trash. Restart.
    3. Repair Disk
        Steps 1 through 7
        http://support.apple.com/kb/PH5836
    4. Disk space / Time Machine ?/ Local Snapshots
       http://support.apple.com/kb/ht4878
    5. Re-index Macintosh HD
       System Preferences > Spotlight > Privacy
       http://support.apple.com/kb/ht2409
    6. For more on this and very helpful tips:
        http://pondini.org/OSX/DiskSpace.html
        http://pondini.org/OSX/LionStorage.html

Maybe you are looking for