Disk health state dont change OS health state

Hi,
Scenario: SCOM 2012 R2 UR4.
The health state of a disk in a given server dont change the health state at OS.
The health state at disk is warning, but the health state at OS is OK.
The questions are:
Is this behavior normal?
How to configure health state at OS to be the same at disk?
Thanks in advance!

As of i have seen even i have seen such situations in my SCOM 2007 R2 where it shows Healthy event if there are multiple Monitors in a critical state.
Based on my understanding SCOM calculates based on the Dependency monitor.
Example: Best state and worst state.
1.So may be even though that disk related issue is there but that totally does not affect the Health of the Agent.
2.In case if there is any specific service named Service 1 which is in a critical state and there is Service 2 and if Service 2 has also become critical because it depends on Service 1. So because of 1 service multiple services are in a non healthy state,
Then if this is the case at that time the agent may change to a critical state in the dashboard.
May be your current situation is like example 1 and not like example 2 so you are still getting the state as Healthy in the Dashboard.
=============================
Any one please correct me if i am wrong.
Gautam.75801

Similar Messages

JTA health state has changed to HEALTH_WARN

Hi 
 I've got the following warning: 
 The JTA health state has changed from HEALTH_OK to HEALTH_WARN with reason codes: Resource OracleStore_1 declared unhealthy.
 
 Can u point out a document, that describes rules of changing JTA's health state ? 
 
 regards
 Lukas 
 WLS 9.2

First of all, it's not likely there is lost data but the proposed solution to delete store directories will destroy data and is not normally recommended. It's much more likely that the data in question never made it into the system as the transactions that inserted data are in the process of rolling back or already rolled back (the exception in the first post indicates the transaction rolled back); or possibly the data is part of an unresolved transaction that has a pending commit.
There appear to be two different problems in this thread and it's doubtful the same solution would apply to both. Based on the minimal information provided:
- (A) check your server log for precursor warnings and errors
- (B) increase transaction timeouts (the global domain default is 30 seconds)
- (C) reboot your WebLogic servers
- (D) ensure your up-to-date on service-packs/patches
- (E) contact customer support
HTH,
Tom

Some, but not all, podcasts existing on the iPod no longer appear in iTunes. Different podcasts have been affected at different times, after changes in the state of the iPod. Only podcasts are affected.

I have not seen this precise issue addressed anywhere. I don’t know if it’s an iTunes or an iPod problem:
- Some, but not all, podcasts existing on the iPod no longer appear in iTunes;
this, after normal behavior for more than a year since purchase of the iPod.
- Different podcasts have been affected at different times, after changes in the state of the iPod.
- Only podcasts are affected.
- This concerns an iPod nano 6th gen. and iTunes 11.0.2 (26) on System 10.6.8
- The only change to iTunes, the Mac, or the iPod is that just before this condition began
I’d begun syncing an iPhone via iTunes.
I sync manually (“manually manage music and videos”). The first time this happened, I wanted to delete seventeen podcast episodes (all belonging to one podcast) existing on the iPod — but they didn’t show up in iTunes. I tried re-downloading them and re-syncing, to see if the new versions would somehow “re-link” to iTunes. They didn’t. Only one — new — episode appeared in iTunes.
I ultimately reset the iPod and manually resynced all the podcasts I currently had on iTunes. That worked, though I had to painstakingly add in all the other content deleted by the reset.
So: after that reset and manual sync, all podcasts and episodes on the iPod were visible to iTunes and I was able to delete the podcast and its — now 18 — episodes I’d wanted to get rid of to begin with. But the next time I connected the iPod, only 8 podcast episodes out of 21 episodes total existing on the iPod were visible to iTunes. These are different podcasts; I’d deleted the original “invisible” ones.
By “visible,” I mean in the “Podcasts” list view under “[name]’s iPod” in the iTunes sidebar. If I select “[name]’s” iPod in the iTunes sidebar and the “Podcasts” tab, all podcasts and episodes are visible, though greyed out because I’m set to sync manually. It’s unclear to me if these are the podcasts on the iPod or those currently in iTunes, as they are currently the same. If I switch to syncing automatically, all content on the iPod will be lost again, so I’m not up to trying it at the moment.
As I said, this involves only podcasts. All other content on the iPod does appear in iTunes.

I have the same problem- i see my movies in the ipod section in itunes and they even show as mpeg4 in the 'kind' section but they dont have that small TV icon next to them. if i play these in itunes, they play fine- but try playing them on the ipod and all you hear is the sound and no picture. All videos that i manually transfer work fine in the beginning- its when i hook up the ipod to the comp again and start itunes- they start showing up without the 'tv' icon!! i have to again transfer them from the itunes library to activate them as videos.
Need Help!!!

How to change the privacy statement link url

I looked into the previous threads , could not find the answer to "Changing the privacy statement url to clients privacy statement url".
I am talking about the privacy statement URL in the page that user see it as soon as user logs into the e-business suite.
I have read the previous theads and developers guide regading how to show or hide this autofooter thing. but could not find any thing about how to change the one in the login page.I even looked ino personalization but could not find a place to change this url. please HELP.
Another question is " is it ok to show privacy statement in just the first page and hide it in rest of the application pages?"
Thanks
karan

Extract from Personalization Guide - Page Footer - Personalization Considerations
* If you wish to personalize the URL that points to the Privacy Statement for a page that displays a standard Copyright and Privacy (that is, its Auto Footer property is set to true), set the Scope to OA Footer, in the Choose Personalization Context page of the Personalization UI.
* If you wish to personalize the URL that points to the Privacy Statement for a page that displays a custom Copyright and Privacy (that is, its Auto Footer property is set to false), set the Scope to Page in the Choose Personalization Context page of the Personalization UI. In the following Page Hierarchy Personalization page , identify and personalize the Privacy page element.

How can I create a navigation bar in the template so I can change the down state of a button on a page made from the template in DW3?

We're creating pages from a template in DW3. The template includes a header, footer and a navigation bar. We've made the navigation bar an editable region so that we can change the down state of the buttons on pages where it is required. However, when we make a new page from the template and try to change the behaviors of the buttons in the navigation bar it will not allow us to make those changes.

Have you considered using CSS styled text/list menus instead of image rollovers. It isn't hard really and it's actually a much better choice for web accessibility and for search engines to find and follow your links. Here are some links to several CSS menu systems you can try:
CSS Express Drop-Down Menus (tutorial)
http://www.projectseven.com/tutorials/navigation/auto_hide/
CSS Tab Designer creates 60+ CSS Styled Button and Tab Menus (download)
http://www.highdots.com/css-tab-designer/
List-O-Rama (DW Extension)
http://www.dmxzone.com/go?5618
CSS Menu Maker (On-Line Menu Generator)
http://www.cssmenumaker.com/
Pop-Menu Magic2 by PVII (DW extension purchase)
http://www.projectseven.com/products/menusystems/pmm2/index.htm
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.blogspot.com

When creating a custom SearchPlugin, is it possible to add more code such as uppercase conversion of the SearchText and IF statements that change the URL depending on what is typed?

When creating a custom SearchPlugin, is it possible to add more code such as uppercase conversion of the searchTerms and IF statements that change the URL depending on the searchTerms? Every time I try to add something firefox doesn't want to add it as a search plugin. I need to create a more powerful search tool for personal use.

I've found some external software applications that will do it, so that leads me to believe its not possible within ID CC.

Can a button change to another state and remain there, and also go to a URL?

Hi --
I've been wracking my brain and scouring the internet since yesterday to find a solution to this...It seems easy enough, but I'm at a loss...maybe I'm over thinking it and it's simply not possible?
We have a button that we want to, when clicked, change to another state, remain there, and also use a navto to go to another page within the publication...is this possible?
We've tried doubling up the actions of the button, using fake buttons, etc. all without success. What we have it at now is...you can tap to navto, and the button does change, but it reverts back to it's previous state in that moment between releasing the button and actually jumping to the page we want it to go to.
The only explanation I've come up with is based on the information on this page: http://help.adobe.com/en_US/digitalpubsuite/using/WS67cb9e293e2f1f60-8ad81e812b10bfd837-80 00.html -- that because the two actions I want to accomplish fall into the two different categories: Supported actions for hyperlink buttons and Supported actions for slideshow buttons, that this simply isn't possible?
Your help is greatly appreciated!
Thanks,
Kristina

No, that's not supported with multiple actions. You can't switch a state and then jump to another document.

View State question - changing states and custom states

Hi all,
I'm working on an application that lets a user register for an event. Each event has associated child information: conferences, tickets, etc. associated with it. What I'm trying to do is create some sort of checkbox list so that, when a user clicks on an event to add it to his registration, the associated child information appears in the display so he can choose all this information at once. I have the list working and I've been trying to use a custom ItemRenderer to pop in the extra info for the user to select when he clicks on an event. The problem I'm having is that, when the user goes to click on a child to add it to his registration, my state is changing back from "selected" to "normal" and the child information disappears. So I guess I have two questions. One, am I even remotely on the right track here? If not, can someone suggest a better approach? Two, if this is the right approach, how do I solve the "disappearing child" problem? I tried creating a custom state that would set everything to visible, but I can't seem to figure out how to get into it...I tried just putting a click event on it and just doing an Alert.show(currentState) to see if I was even getting into my custom state, but I just kept switching between "normal" and "selected."
Code:
ItemRenderer:
<s:ItemRenderer name="eventItemRenderer"
xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark"
focusEnabled="false" xmlns:mx="library://ns.adobe.com/flex/halo" xmlns:registrationapi="services.registrationapi.*">
<fx:Script>
<![CDATA[
import mx.controls.Alert;
import mx.events.FlexEvent;
//this gets my data to populate the dropDown list when the parent event is selected
protected function checkbox1_clickHandler(event:MouseEvent, selectedEventCode:String):void
showPrimaryConferences = true;
getEventConferencesResult.token = registrationAPI.getEventConferences(selectedEventCode.name);
protected function comboBox_creationCompleteHandler(event:FlexEvent):void
getEventConferencesResult.token = registrationAPI.getEventConferences(data.EventCode);
]]>
</fx:Script>
<s:states>
<s:State name="normal"/>
<s:State name="hovered"/>
<s:State name="selected"/>
</s:states>
<s:Rect top="0" left="0" right="0" bottom="0">
<s:fill>
<s:SolidColor id="backgroundColor" color="0xFFFFFF" />
</s:fill>
</s:Rect>

<s:Path data="M 3.5 6.5 l 2 2 l 6 -7" includeIn="selected" right="2" verticalCenter="1">
<s:stroke>
<s:SolidColorStroke weight="2" caps="square" color="0x000000" />
</s:stroke>
</s:Path>
<fx:Declarations>
<s:CallResponder id="getEventConferencesResult"/>
<registrationapi:RegistrationAPI id="registrationAPI" fault="Alert.show(event.fault.faultString + '\n' + event.fault.faultDetail)" showBusyCursor="true"/>
</fx:Declarations>
<s:VGroup left="3" right="10" top="3" bottom="3">
<s:CheckBox name="{data.EventCode}" label="{data.EventTitle}" id="selectedEventCode" fontWeight="bold" click="checkbox1_clickHandler(event, selectedEventCode.name)" />
<s:Label text="{data.EventTitle}" id="selectedEventCodeLabel" fontWeight.selected="bold" />
</s:VGroup>
</s:ItemRenderer>
Thanks in advance for any suggestions!
~ amanda

I simplified the problem to it's essence and came up with this:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="horizontal"
 creationComplete="init()">
 <mx:Script>
 <![CDATA[
 import mx.collections.ArrayCollection;
 [Bindable]
 public var lProvider:ArrayCollection;
 private function init():void
 var la:Array = [{label: "Conference", checked: true},
 {label: "Tickets", checked: false}];
 lProvider = new ArrayCollection(la);
 ]]>
 </mx:Script>
 <mx:List id="cList" width="200" dataProvider="{lProvider}" itemClick="lProvider.refresh()">
 <mx:itemRenderer>
 <mx:Component>
 <mx:HBox width="100%">
 <mx:CheckBox selected="{data.checked}" click="data.checked = event.target.selected"/>
 <mx:Label text="{data.label}"/>
 </mx:HBox>
 </mx:Component>
 </mx:itemRenderer>
 </mx:List>
 <mx:VBox width="600">
 <mx:Panel title="Conference component" width="100%" height="200"
 visible="{lProvider.getItemAt(0).checked}"
 includeInLayout="{lProvider.getItemAt(0).checked}"/>
 <mx:Panel title="Ticket component" width="100%" height="200"
 visible="{lProvider.getItemAt(1).checked}"
 includeInLayout="{lProvider.getItemAt(1).checked}"/>
 </mx:VBox>
</mx:Application>
Does this help?
Dany

Change base view state from a custom component

I'm pretty new to flex and I'm having a small issue in change the view state from a component.
My Application have 2 custom components called userlogin and main menu. In the main application page I have userlogin component in one state and the main menu component in another. I'm trying to change the state if the login in successful from user login to main menu. I have the following function written inside the login component.
private function IsUserLoggedIn(evt:ResultEvent):void
                if (evt.result.islogin.toString() == "true")
                    currentState = "MainMenu";
                else
                    Alert.show("Login failed, please try again.", "Login Failed");
This code worked when I had all the controls in the main page. But then I created components and included them in to components and now when the login is success, its giving the following error.
ArgumentError: Undefined state 'MainMenu'.
    at mx.core::UIComponent/getState()[E:\dev\4.0.0\frameworks\projects\framework\src\mx\core\UI Component.as:9908]
    at mx.core::UIComponent/findCommonBaseState()[E:\dev\4.0.0\frameworks\projects\framework\src \mx\core\UIComponent.as:9928]
    at mx.core::UIComponent/commitCurrentState()[E:\dev\4.0.0\frameworks\projects\framework\src\ mx\core\UIComponent.as:9750]
    at mx.core::UIComponent/setCurrentState()[E:\dev\4.0.0\frameworks\projects\framework\src\mx\ core\UIComponent.as:9701]
    at mx.core::UIComponent/set currentState()[E:\dev\4.0.0\frameworks\projects\framework\src\mx\core\UIComponent.as:6087 ]
    at components::UserLoginForm/__btnSubmit_click()[C:\Projects\WarrantyAutomation\src\componen ts\UserLoginForm.mxml:60]
I'm sure this has something to do with accessing the states from a custom component, but I do not know how to change the state to the main menu. Please help me with this. Any help is greatly appriciated.

Hi dasun1981,
private function IsUserLoggedIn(evt:ResultEvent):void
                if (evt.result.islogin.toString() == "true")
                    currentState = "MainMenu";
                else
                    Alert.show("Login failed, please try again.", "Login Failed");
If I am right the above function is in your userlogin component and the two components "userlogincomponent" and "maincomponent" are in main application file and the states were also defined in main application file.
But in the function above the currentState refers to the state of the userlogin component and not the main application ...but the states are defined in main application file...that's the reason why the exception was thrown...
Instead you replace the line in the above function with the below line:
Application.application.currentState = "MainMenu";
Please mark it as answer if it helped you.
Thanks,
Bhasker Chari

Agents state getting changed automatically from NotReady to Ready

Agents state getting changed automatically from NotReady to Ready on random position during break time. Can some help me out?
UCCE version 8.5

Hello Ahmad,
Bug below describes a scenario where the agent is transitioned to the Ready state without manually changing it.
Also effects 8.5.
CSCty97770
Save Bug
UCCX: Agent Incorrectly Set To Ready After RNA On ICD Extension
Symptom:
A Unified Contact Center Express (UCCX) agent may transition to the Ready state without manual intervention.
Conditions:
This occurs when, while on a call on the personal line, the agent receives a consult transfer from another agent on the ICD line, does not answer this call and the call is disconnected by the calling agent. When processing this disconnect, the agent state is incorrectly transitioned to Ready even though the call is still in progress ...more
Details
Known Affected Releases: (2)
8.5(1)SU2 | 8.0(2)SU4
Known Fixed Releases: (1)
9.0(.96000.398)
Product: Cisco Unified Contact Center Express
Hope this helps,
Please rate helpful posts.
Thanks.

Invalid request for a change in window state

Ok...
Creating a JSR168 portlet and it works fine in Pluto, but I get the following when I deploy to P7:
ERROR: Content not available. REASONE: Invalid request for a change in window state
Here is what the portlet is supposed to do:
* Display a form
* User clicks find
* Lookup is performed
* Window state in processAction() method of portlet is changed to MAXIMIZED
* I'm guessing this is where the error is occuring
I also think that for the TableContainer, I have some sort of attribute incorrect having to do with one of the channelsIs values.
I tried toggling them one way or another without any effect.
Suggestions?

Ive run into this issue also. I need a way for a portlet to change to its maximized state for the purposes of user registration. Is there anyway this can be done? I know that sun jsp "Providers" which are shown on their example desktop, have some sort of maximized state that they can go into, but im not sure how to use this in a portlet.
There seems to be very inconsistent support between the proprietary sun provider api, and the portlet api.

Multi-State Object Change Speed

How can I adjust the speed and style how the multi-state object changes its states? I find the fade to be too long. Any ways that that can be shortened?

Select the MSO and use the options in the Folio Overlays panel.

First LID close works, but state never changes back to open

I am using a Razer Blade 14" with linux-ck kernel (although I have tested in the main kernel and the issue remains).
I like to be able to close the lid to suspend. But it is not working properly.
Note: I am using
cat /proc/acpi/button/lid/LID0/state
to figure out the state of the lid.
When I start the laptop, the lid is correctly reported as open. When I first close it, the laptop goes to sleep, and when I open it again, it wakes up.
However, it is now reported as closed, although I just woke it up by opening the lid.
If I close the lid, it also does not suspend (I have to manually suspend).
A related bug: when I manually suspend, if I close the lid before it is done suspending, the laptop just hangs and needs to be hard-rebooted.
I am not sure what logs I can post here, but will provide anything that people think is useful.
Thanks in advance for the help!
Rodrigo
EDIT: After some investigation, the related bug seems to be unrelated. It seems like suspend randomly hangs, and I got lucky enough to hang on the few times I tried to close the lid while it was suspended.
Last edited by rgomes (2013-11-23 19:03:59)

dmesg doesn't report anything about the lid.
It it's of any use, here's the report when I close the lid for the first time, it suspends, I open it and it wakes back up, and I close and open it again (no action happens then).
[ 855.735445] PM: Syncing filesystems ... done.
[ 855.743716] PM: Preparing system for mem sleep
[ 855.743832] bbswitch: enabling discrete graphics
[ 856.273631] Freezing user space processes ... (elapsed 0.001 seconds) done.
[ 856.275441] Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done.
[ 856.276063] PM: Entering mem sleep
[ 856.276116] Suspending console(s) (use no_console_suspend to debug)
[ 856.276512] wlan0: deauthenticating from 00:21:d8:49:a1:b3 by local choice (reason=3)
[ 856.303042] cfg80211: Calling CRDA for country: US
[ 856.303058] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 856.305387] sd 0:0:0:0: [sda] Stopping disk
[ 856.337313] mei_me 0000:00:16.0: suspend
[ 856.902051] PM: suspend of devices complete after 625.631 msecs
[ 856.902253] PM: late suspend of devices complete after 0.198 msecs
[ 856.913157] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[ 856.924119] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[ 856.946045] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[ 856.957112] PM: noirq suspend of devices complete after 54.857 msecs
[ 856.957425] ACPI: Preparing to enter system sleep state S3
[ 856.957634] PM: Saving platform NVS memory
[ 856.958313] Disabling non-boot CPUs ...
[ 856.959891] smpboot: CPU 1 is now offline
[ 856.961339] smpboot: CPU 2 is now offline
[ 856.963019] smpboot: CPU 3 is now offline
[ 856.964410] smpboot: CPU 4 is now offline
[ 856.965803] smpboot: CPU 5 is now offline
[ 856.967169] smpboot: CPU 6 is now offline
[ 856.968529] smpboot: CPU 7 is now offline
[ 856.968709] ACPI: Low-level resume complete
[ 856.968709] PM: Restoring platform NVS memory
[ 856.968709] Enabling non-boot CPUs ...
[ 856.968709] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 856.981274] Intel pstate controlling: cpu 1
[ 856.981329] CPU1 is up
[ 856.981355] smpboot: Booting Node 0 Processor 2 APIC 0x4
[ 856.993715] Intel pstate controlling: cpu 2
[ 856.993767] CPU2 is up
[ 856.993787] smpboot: Booting Node 0 Processor 3 APIC 0x6
[ 857.006143] Intel pstate controlling: cpu 3
[ 857.006193] CPU3 is up
[ 857.006215] smpboot: Booting Node 0 Processor 4 APIC 0x1
[ 857.018466] Intel pstate controlling: cpu 4
[ 857.018516] CPU4 is up
[ 857.018536] smpboot: Booting Node 0 Processor 5 APIC 0x3
[ 857.030876] Intel pstate controlling: cpu 5
[ 857.030919] CPU5 is up
[ 857.030936] smpboot: Booting Node 0 Processor 6 APIC 0x5
[ 857.043269] Intel pstate controlling: cpu 6
[ 857.043311] CPU6 is up
[ 857.043328] smpboot: Booting Node 0 Processor 7 APIC 0x7
[ 857.055674] Intel pstate controlling: cpu 7
[ 857.055712] CPU7 is up
[ 857.063860] ACPI: Waking up from system sleep state S3
[ 857.097072] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[ 857.119078] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 857.141070] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 857.163187] PM: noirq resume of devices complete after 98.903 msecs
[ 857.163364] PM: early resume of devices complete after 0.147 msecs
[ 857.163388] i915 0000:00:02.0: setting latency timer to 64
[ 857.163399] xhci_hcd 0000:00:14.0: setting latency timer to 64
[ 857.163433] mei_me 0000:00:16.0: irq 45 for MSI/MSI-X
[ 857.163449] ahci 0000:00:1f.2: setting latency timer to 64
[ 857.163521] ehci-pci 0000:00:1a.0: setting latency timer to 64
[ 857.163538] snd_hda_intel 0000:00:03.0: irq 46 for MSI/MSI-X
[ 857.163595] mei_me 0000:00:16.0: version message write failed
[ 857.163596] mei_me 0000:00:16.0: unexpected reset: dev_state = RESETTING
[ 857.163602] snd_hda_intel 0000:00:1b.0: irq 48 for MSI/MSI-X
[ 857.163717] ehci-pci 0000:00:1d.0: setting latency timer to 64
[ 857.468028] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 857.470879] ata1.00: configured for UDMA/133
[ 857.470917] sd 0:0:0:0: [sda] Starting disk
[ 857.494196] usb 1-13: reset full-speed USB device number 3 using xhci_hcd
[ 857.505658] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802225df540
[ 857.505659] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802225df5c0
[ 857.505660] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802225df580
[ 857.505660] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880222be98c0
[ 857.505661] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880222be9880
[ 857.658222] usb 1-14: reset high-speed USB device number 4 using xhci_hcd
[ 857.714527] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880037982080
[ 857.873499] PM: resume of devices complete after 712.120 msecs
[ 857.875809] PM: Finishing wakeup.
[ 857.875918] ath9k 0000:03:00.0: no hotplug settings from platform
[ 857.875810] Restarting tasks ... done.
[ 857.877445] video LNXVIDEO:00: Restoring backlight state
[ 857.877449] video LNXVIDEO:01: Restoring backlight state
[ 857.877452] bbswitch: disabling discrete graphics
[ 857.877462] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
[ 858.699065] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 861.567705] wlan0: authenticate with c8:4c:75:d1:0f:ec
[ 861.582025] wlan0: direct probe to c8:4c:75:d1:0f:ec (try 1/3)
[ 861.783072] wlan0: send auth to c8:4c:75:d1:0f:ec (try 2/3)
[ 861.784100] wlan0: authenticated
[ 861.785101] wlan0: associate with c8:4c:75:d1:0f:ec (try 1/3)
[ 861.787455] wlan0: RX AssocResp from c8:4c:75:d1:0f:ec (capab=0x11 status=0 aid=1)
[ 861.787524] wlan0: associated
The only thing that seems to error is mei_me, but I don't know if that would be associated with the lid switch.
Last edited by rgomes (2013-11-22 17:59:44)

Post install problem. Changes to the state or options of DB SUSDB can't be made at this time. DB Is in single-user mode.

Hi,
Have you ever come across this problem before.
Changes to the state or options of DB SUSDB can't be made at this time. DB Is in single-user mode and a user is currently connected to it.
It's preventing the post WSUS installation task from completing.
I opted to use the WID Database option and it created the SUSDB.
How can I resolve it?
Thanks

this sounds similar to some issues that occurred when KB2720211 was first release (the update does put the DB into single-user mode, to perform some tasks, then switches it back into multi-user mode. sometimes, that switch-back was not performed, and the
DB was left in single-user mode).
You can refer to this thread, the steps are buried in there.
http://social.technet.microsoft.com/Forums/windowsserver/en-US/531d576b-eeaf-40dc-9057-b3adbde6186f/kb2720211-debacle-is-this-acceptable-microsoft-quality?forum=winserverwsus
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Adobe Muse - Contact Forms State not changing

Hey. So I've been playing around with Muse's contact form and changing the aesthetics of the forms (rounded corners, size, text color etc) up to when I came to changing the State of the contact boxes. They seem to show to work perfectly fine in the design mode when you check all rollover states, but when you preview the site in the browser or even in Muse's Preview mode, the changes don't seem to be exactly how you thought they would be. Specifically, I changed the alignment of the text in the box from left to centered, yet the normal state keeps it left (and italicized, which is default). Anyone know the fix to this?

Like I said, I made sure I changed all the states to the ones that I wanted yet the preview doesn't show the states as I wanted. My text box has left aligned text when i've made sure to center it several times.
This is what it looks like in the design mode in Muse. (Don't mind the Email/Password, I'm just designing, not for functionality.)
This is what it looks like once previewed in a browser. Upon clicking and submitting the text aligns in left as well.

Disk health state dont change OS health state

Similar Messages

Maybe you are looking for