Disk images in Win XP ... how to ?

Howdy folks !
I have Leopard and Win XP running on my MBP pretty much without probs. I will use Windows solely for gaming and here comes my question to the wise:
In Mac OS, I can create a disk image of my Game DVD on the desktop and mount it when needed and don’t need to pop the "real" DVD into the optical drive.
Is there a way to achieve this in Win XP ?
Any tip’ll be appreciated !

Hi,
my what a small world the internet is
Daemon Tools http://de.wikipedia.org/wiki/DAEMON_Tools and http://www.daemon-tools.cc
Good Luck
Stefan

Similar Messages

How do I restore a disk image on the startup disk?

Hello,
Where do I begin? Ok, my computer is an iMac and I mainly use OS 10.6.8. I have partitioned the disk into three parts: Snow Leopard, Lion and Tiger ( and I'm thinking of deleting Tiger). The main OS I use on my computer is Snow Leopard (10.6.8). I wanted to try out Yosemite so I upgraded the Lion partition and it soon became Yosemite. I was able to switch back and fort a couple of times last night, but today, when I went to the Startup Disk to go to Yosemite the disk image for Yosemite was gone and it only shows the disk image for Snow Leopard. I did a little research and if I'm not mistaken and read correctly, it indicates that Apple has done away with the disk image for Yosemite? How is one to switch back and forth between systems? Thank you for any insight to my question. -Della
P.S. If I have posted in the wrong category, please feel free to repost in the correct category, but please let me know. Thank you!

If it's a Windows executable file other than a self-extracting zip, you won't be able to open it without installing Windows; on a PowerPC Mac, this requires Virtual PC or the Q emulator.
If it's a self-extracting zip, StuffIt Expander will open it.
If it's actually a disk image, change its extension to dmg or iso and double-click it.
(109118)

Using disk images for learning games?

Hello, I've 2 g3 imacs running 9.2.2, and they are for the grandkids to use learning games on.
The kids are very hard on the software disks. When I found out about disk images I made them up, now to install them properly. The games are installed, but where to store the disk images? The desk top icons for the games will work after the disk images have been double clicked and the mounted disk image appears on the desktop, but when the imacs are turned off the mounted disk image is lost. How or where does one put the disk images in a safe place so the kids don't get at them, and the disks are mounted every time, without actually starting, when the Mac is started? Start up menu?
I'm planning on multiple accounts with them having a standard account with game privileges so they don't mess the whole thing up. If their accounts get too messed up for me to repair I figured on maybe deleting the account and opening up a new one? Any Ideas are very welcome.
Thank you,
EZ

Hi, EZ -
You're quite welcome.
I had a thought with regard to the disk image files. Are they in a .smi format, or are they in a .img format?
The .img format requires the assistance of the Disk Copy utility in order to mount the image. This is the standard format generated by the user version of Disk Copy. It requires that Disk Copy be available to Finder to act as a helper app in order to mount the image.
The .smi format does not - .smi stands for Self-Mounting Image. The user version of Disk Copy can not make this format; but I have seen a utility to convert .img format to .smi format. The slight advantage with this format is that Disk Copy does not need to be available to Finder.
In both cases the default is to run a checksum verification before the image is finally mounted. The delay caused by this verification can be inconvenient - verification is intended to confirm the integrity of the image after it has been copied, transported, or downloaded, but is usually not necessary when the image resides on a hard drive.
The checksum verification for .img file types can be removed. With the image not mounted, open Disk Copy. In Disk Copy's Preferences (Edit menu), uncheck the Verify Checksum item. Save the Preferences window. Then select Convert Image from the Image menu, navigate to the disk imge file from which you want to remove the verifiaction, select it and click the Open button. A new window will appear, similar to a Save As type window. Leave everything in that window untouched (unless you want to change the base name of the file - the extension .img should be left intact) and click the Save button. The image will be mounted, the original disk image file will be deleted, and a new disk image file created. Unfortunately creating the new image file takes quite a while since it is creating a new one, not actually modifying the old one - but it does get rid of the intrusion of the checksum verification requirement.
I verified on my G4/500 running OS 9.1 that a .img file (one I had made from a game CD years ago) dropped into the Startup Items folder will be mounted automatically at the end of the startup sequence. I also tested with an alias to the .img file, and it, too, worked fine - the disk image was mounted automatically at the conclusion of the startup sequence.
When you make the alias to the disk image file (the .img one), be sure you are placing it into the Startup Items folder, and not the Startup Items (disabled) folder.
If you have the machine set to use Simple Finder (which removes Finder's keyboard commands and many menu options for Finder), that may interfere with items in the Startup Items folder being run at startup. Or, it may not - I have not checked that.
*** Edit ***
I have verified that the alias to a .img file will mount the disk image even when the machine is booted using Simple Finder.
Another thought, related to Multiple Users - if you do decide to set up Multiple Users, and the disk images are of type .img, be sure to authorize Disk Copy for each of the accounts for which the disk images are to be mounted. If you have the disk image files in a .smi format, since Finder views that file type as being an application, you would need to authorize each of those disk image files for each account which is to have access to them.

Putting info into an Encripted Disk Image...?

I created an Encripted Disk Image to file some sensitive things in BUT how do I drag them into it...I show a .dmg icon but I cannot drag any folders into it...how do I go about this..?
Also when I click on the .dmg nothing happens...and it shows a folder of this under '/Volumes' which I can't find....HELP

robert larkin,
In case anything here might be of help to you.
1.
When I create a .dmg and save it to Documents, the drive icon appears in the top portion of my sidebar in the Finder. I can double click to open it, add items, delete items, and then eject it when I am done. I can put the .dmg file wherever I want it to be stored.
2.
Here are three links which I have used to figure out how to work with disk images.
Creating a blank disk image
Creating a disk image
Mac OS X: How to create a password-protected (encrypted) disk image
Sincerely,
No Alibi.
 Backup what you can't afford to lose. Mac OS X (10.4.8)

Questions related to Disk Images - Image Format Options

Can anyone tell me a more about using Disc Images? I am with a group of new Mac Users and we're focusing on Disc Images at the moment. Want to create a Keynote Presentation for the group when finished.
I have found already a few answers here, if someone could help me on the rest?
In this Thread I focus on the Image Format.
Disc Utility (using OS 10.5.7) offers the following options when creating a Disc Image:
sparse Disk Image
sparse bundle Disk Image
Unanswered Question:
1) What is the difference between sparse Disk Image and sparse bundle Disk Image?
Answered Question (if you have ad-on Informations for the answered Questions feel free to jump in):
Question: What is sparse disk Image for?
Answer: "Choose an image format. You can use "sparse disk image" for a disk image that only uses as much space as it needs, rather than a set amount of space. If you're not sure, use "read/write disk image" choice." (Source: How to create a password-protected (encrypted) disk image in Mac OS X 10.3 or later: http://support.apple.com/kb/HT1578)
Thanks in advance
Rama

Thank you both for your Infos so far. In the meantime I've created some Disk Images. What I noticed is, when I choose a small Image Size like 10 MB, then it changes from "Single Partition Map" to "No Partition Map". When I go bigger to 500 MB it changes to "Hard Disk".
It was already helpful to read the Manual to understand the Single Partition Maps, but what I still don't understand is the difference between using "no partitions map" at all and the other options such as "Hard Disk", "CD/DVD" or "CD/DVD with ISO Data".

Disk Image Overhead & Encryption

An observation and question to the forum.
Is the overhead on a disk image that much? How can it be made more efficient? Suggestions on alternatives to encrypt file/folders (free preferably)?.
The reason for doing this was to secure some files with out going thorough file vault (for mobile storage), sending files, or mailing them. Below you will see a reference to an article on this.
Some examples I tested
A 10mb disk image has about 1.7mb free
A 40mb disk image has about 31mb free
A 100mb disk image has about 89.6mb free
A 660mb disk image has about 624.3mb free
A 4.7gb disk image has about 4.35gb free
So a 10mb disk image is impractical or storage wise very expensive. This is not even with the encryption overhead.
Using Disk Utility I created a disk image using the following parameters:
- Volume Size: 10mb
- Volume Format: Mac OS Extended (Journaled)
- Encryption: none (was not used in testing)
- Partitions: Single partition (except for CD/DVD formats)
- Image Format: read/write disk image
Reference:
Apple - Mac OS X: How to create a password-protected (encrypted) disk image
http://docs.info.apple.com/article.html?artnum=107333
Apple - Mac OS X: About Encrypted Disk Images
http://docs.info.apple.com/article.html?artnum=107332
Mac Observer
http://www.macobserver.com/tip/2007/11/28.1.shtml
System Info:
MacBook2,1 (Model Identifier)
Intel Core 2 Duo 2.16 GHz, 2 GB 667 MHz SDRAM
OSX 10.5.1 (Leopard), Boot ROM MB21.00A5.B07
File Vault is on, Time Machine is On

An observation and question to the forum.
Is the overhead on a disk image that much? How can it be made more efficient? Suggestions on alternatives to encrypt file/folders (free preferably)?.
The reason for doing this was to secure some files with out going thorough file vault (for mobile storage), sending files, or mailing them. Below you will see a reference to an article on this.
Some examples I tested
A 10mb disk image has about 1.7mb free
A 40mb disk image has about 31mb free
A 100mb disk image has about 89.6mb free
A 660mb disk image has about 624.3mb free
A 4.7gb disk image has about 4.35gb free
So a 10mb disk image is impractical or storage wise very expensive. This is not even with the encryption overhead.
Using Disk Utility I created a disk image using the following parameters:
- Volume Size: 10mb
- Volume Format: Mac OS Extended (Journaled)
- Encryption: none (was not used in testing)
- Partitions: Single partition (except for CD/DVD formats)
- Image Format: read/write disk image
Reference:
Apple - Mac OS X: How to create a password-protected (encrypted) disk image
http://docs.info.apple.com/article.html?artnum=107333
Apple - Mac OS X: About Encrypted Disk Images
http://docs.info.apple.com/article.html?artnum=107332
Mac Observer
http://www.macobserver.com/tip/2007/11/28.1.shtml
System Info:
MacBook2,1 (Model Identifier)
Intel Core 2 Duo 2.16 GHz, 2 GB 667 MHz SDRAM
OSX 10.5.1 (Leopard), Boot ROM MB21.00A5.B07
File Vault is on, Time Machine is On

The backup disk image "/Volumes/Data/Neil-MacBook Pro (171).sparsebundle" is already in use. error message. How do I fix? Ideas

"The backup disk image “/Volumes/Data/Neil-MacBook Pro (171).sparsebundle” is already in use"
OS X 10.8.1 (12B19)
" error message just started
Mountain Lion
OS X 10.8.1 (12B19)
MacBookPro 2.53 Corei5
All software update installed
Time Capsule : 1TB, 599 of 998GB used
What causes it?
How do you fix it?
How do you stop it happening again?
Any ideas please

Thanks for fast response.
I already tried C12, no luck. I did read C17, but that did not help either.
I agree that Apple should really spend a bit more time on ensuring this common problem is resolved more quickly
But where to do you sent this request to? Doesn't seem easy to find a person to send it to.
I dumped by corporate wIn-pc environment that I was forced to use for the past ...forever. Have been delighted with the Mac experience..... for 24 months..but these type of un-resolved matters with terse error messages reminds me of the bad old days.
I had the problem 2 weeks ago and solved it by "clicking about" after reading the forum Can't remember what i did though. V. V. V. frustrating when the Mac is a business tool. I don't want to be a mechanic, I want to be a driver.
Thanks again for your help

How does Time Capsule treat data other than disk images?

Hi there
I have a 3TB TC to use primarily as a wireless backup, as intended by Apple.
However, I wish to temporarily transfer a couple of GBs of data to it for transferring across to another machine.
I seem able to do the above, but my question is: how does the TC treat the two different types of data?
- Is it a better idea to partition the drive first?
- Is the TC likely to automatically delete the original data, like it does with old disk images, when the disk gets full?
- Can the TC handle the disk images and the original data side-by-side?
Just need some help understanding the 'Apple Magic' with this one!
I do realise that having the original data on the TC won't help me if it fails, but like I said, this is a temporary measure. Please don't post about this, as you won't win yourself any points - you'll just look like a smart-*** and annoy everyone.
Thanks in advance!

1. The Time Capsule will not automatically delete data that wasn't originally put on it as part of a Time Machine backup.
2. It isn't possible to partition the Time Capsule. Network drives can only be partitioned by software specifically designed to work with that drive.
(67818)

How do I mount a disk image that won't open?

I have an external drive Samsung 500 GB that was failing. I think my MacBook Air (10.6.8) caused it to fail because it wouldn't allow me to eject the disk even though I forced quit all programs. I eventually had to just unplug the drive and this caused the external disk to fail as it had not been ejected properly. Not my fault. It's the MBA's fault for not letting me eject the disk. Now the Samsung disk won't mount properly and I get a message that the drive is failing and I should save the data.
Anyhow, I used the free version of Data Rescue 3 to try and save the data on the failing Samsung 500 GB drive and move it onto a brand new Toshiba 1 TB drive.
I was unable to use the normal scanning function of Data Rescue 3 as the hardware of the drive was too damaged, and so I used the clone function on Data Rescue 3 to clone the data onto a non-failing hard drive, with the intent of restoring the data later.
I am not sure if I was successful in making the disk image. It hung up at the 99.6% point for about 12 hours when I decided to give up on it, and I shut down Data Rescue so I could eject the hard disks.
However, it would not let me do it. I tried force ejecting but still I could not eject the disks.
I ended up just unplugging the drives. I think the Samsung drive died almost completely then because it made a whole lot of clicking noises after that (it was only making a few clicking noises before that).
Anyhow, I plugged the Toshiba 1 TB drive into the computer again and used Data Rescue to scan the drive with the disk image on it to see if I could detect files on that drive.
It opened up the structure and I was able to see that most or all of the files were there (abbout 450GB of data) just from seeing the information about the files in the structure tree - the labels of the files (file type labels such as jpg, mp4 etc) and the size of the files, although I could not open up the files to check all of them.
I tested out the restore function of Data Rescue by downloading one file (<10MB) file. I am using the free version and can download one file for free to test things out.
It worked and I was able to save that file onto a second external drive (Western Digital 500 GB) I had plugged in. I had bought this drive just to do the data rescue.
So I think the files are salvageable and the disk image is OK.
However, when I tried to open the disk image in Disk Utility, by opening it as the source and choosing the WD drive as the destination I could not open it. I got an error message. I can't remember what the message was.
I tried just opening the disk image in Finder by just clicking on the disk image but it won't mount.
Is that because my hard drive doesn't have enough space? My Desktop on the MBA only has 12 GB free and the WD drive has only 500 GB on it even though the disk image is about 501 GB.
I don't know why the disk image is that size when the failing Samsung drive only had 450 GB of data on it.
Anyway, what should I do to mount the disk image?
I want to mount the disk image so that I can copy or move the files from it to another external drive so that I can save those files.
Is it because the WD is only 500 GB or does it mean there's a problem with the disk image I made?
Should I try Carbon Clone Copy? I use that to make backups of my MBA internal HDD though I have never used it for opening or making disk images.
I have never dealt with disk images before except for dmg files of applications downloaded from the internet.
I am trying to avoid using Data Rescue 3 as I have to pay for it and if there is a free option, such as Disk Utility, CCC or other, I want to try it to restore the data in the disk image.
Sadly, I think the Samsung drive is ruined beyong repair as it's making a lot of clicking sounds and doesn't mount properly in Disk Image and I get a message that it's beyond repair or something like that in Disk Utility.
So I am relying on the disk image I made on the Toshiba drive to restore my files.
(I think it was the last movie file that caused the problem because it was when I was trying to copy it onto the Samsung external drive, all the problems began - hanging up when copying it, not being able to eject the Samsung disk, causing hardware issues on Samsung disk and getting warning messages on Disk Utility.)
BTW, I learned how to eject a drive when it won't eject the normal way, I have to use command window and type in commands, but that's another post ....
Any advice?
I am thinking of going out and buying a second 1 TB external drive so that I have a disk with enough space to open the 501GB disk image on it, just in case that was the sole problem.
However, I am not sure that is the case, and I think there may be a problem with the disk image or I am not going the right way about opening it.
Thanks for any advice.

I think I've found the solution to this problem.
http://superuser.com/questions/19426/im-unable-to-mount-a-dmg-getting-a-no-mount able-filesystems-error
I am following the instructions here:
I ran into a similar situation. I did what simonair suggested and I received a message in Terminal that Volume mounted successfully. However It did not help me access the mounted Volume neither was I able to confirm the mounted Volume. Nor was I able to mount the image using Disk Drill or even scan through. Nothing succeeded.
Here is what I did to solve my problem. I see that in this post some suggested that we should convert name.dmg to writable file. I used the command from Terminal to convert but was not successful. INSTEAD alternatively, I used Disk Utility, attached the Volume (yes I got the same message again, ''no mountable system files'' however, Disk Utility nevertheless attached the image, which I was able to do before anyways. This time, I selected it and then clicked New image, and then selected image format read/write, not the compressed option. I created a new image. This time this image was writable however, it still would not mount using Simonair's solution. However, this time I was able to scan it with Disk Drill with exact file locations and folder hierarchy as I had. Recovering all from thereon was a breeze. Just remember: when you create new image of an attached volume and chose not compressed but read/write, you need to have a disk with exact amount of space that totals the total space allocated within that name.dmg file (not the amount of space the data takes). Mine was huge, and luckily I had an external disk with enough space to do that and it took about 5 hours for about 400GB of disk allocation. Good luck.
And so far it seems to be working. Even though the volume is grayed out on the left side of Disk Utility, I am still able to select it as the source for making a new disk image. I chose Read and Write and no compression.
The only thing I might be doing differently is that instead of choosing the disk image as the source, I chose the volume as the source. The volume is grayed out, but the disk image is not.
It seems to be working all right. Keep my fingers crossed.
If this doesn't work, I will use Data Recovery 3 as a last resort.

How do I create a disk image for windows 7, using a windows computer for USB bootcamp for mac?

Hi There, I have just bought a new 2013 iMac.
Spec: 3.4 GHz intel core i5, 16GB 1600 MHz DDR3 Memory , NVIDIA GeForce GTX 775M 2048 MB Graphics with OS X 10.9.4.
How can I create a 'disk image' from a windows 7 professional 64bit installation DVD using a windows laptop with windows 7 Operating system on? I want to transfer this 'disk image' (ISO?) to a USB ready for installing windows onto my 2013 iMac using bootcamp? I want to use bootcamp from a USB as I have no disk drive for the installation DVD on my iMac. I hope all this is clear.
Thank you. Joe

Yes, that's correct, at least not directly. You can create a blank disk image, copy the file to the mounted disk image, then burn the image to a CD/DVD.
Open Disk Utility and select Blank Disk Image from the New menu. Provide a name, Save location, and select the image size from the drop down menu. Leave Encryptions at None and Format as read/write. Click on the Create button.
After the image file appears the "removable" disk should be automatically mounted. If not double-click on it to mount it. A "removable" disk icon will appear. Drag the file you want to place on the disk image to the "removable" disk icon. The eject the "removable" disk icon. Now select the disk image file in the DU left side list and click on the Burn icon in the DU toolbar. Be sure to have a blank disc ready.
The above is actually the "long" way to do this. A much easier way is to simply insert a blank CD or DVD into the optical drive. The Finder will pop up a dialog asking what to do. Select the option to mount on the Desktop. You will now see a disc icon on the Desktop. Drag the file you want to burn to the CD/DVD, right-click or CTRL-click on the disc icon and select Burn from the contextual menu.
Why reward points?(Quoted from Discussions Terms of Use.)
The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

How do I create a start-up disk image without restarting from the Install DVD?

(I know this is not MacBook Pro question per se, but I can't find a software discussion this applies to.)
Situation:
My MBP is running, but it's acting up and Onyx tells me that the start-up volume needs repair and directs me to use Disk Utility.
But to repair a volume using Disk Utility, you must restart from the original Install DVD (or some other start-up volume).
But although the MBP will read my old Leopard Install DVD and the Install DVD that came with my MBP, it refuses to restart from either of them. (Trying to do so gets as far as the Apple logo on a gray screen and then hangs there; all disk activity ceases.)
Question:
How can I (is it even possible to) create a start-up volume on my external FW drive without starting my MBP from a DVD?
In other words, is there a way to either:
a) create a disk image from the Install DVD on my external FW drive and then designate that disk image as my start-up drive?
OR
b) create a disk image on my MBP's internal drive that I can then use to run a System Install on my external drive?
(BTW, I know I can create disk images using Disk Utility, but it offers many options for type, compression, etc., that are beyond me. )
Any advice would be greatly appreciated!

OS X Lion includes a new feature called Lion Recovery that includes all of the tools you need to reinstall Lion, repair your disk, and even restore from a Time Machine backup without the need for optical discs.
Restart your Mac holding down the Command-R to enter the Recovery HD.
From there you can use Disk Utilty.
http://support.apple.com/kb/HT4718
Stefan

How do I re-upload my HD from a Disk Image

I recently had some issues with my Mac Book Pro and I had to delete my entire Hard Drive. Using Disk Utility I backed it up first by taking a disk image of it all. I fixed my computer and now I am trying to work out how I can re-install my Hard Drive.
I open up the disk image, which takes hours to verfiy because there is so much stuff on it, and all my stuff is there. However, it doesn't update my computer to be how it was before and also it doesn't stay there, acting more like an external drive, so when I turn off my computer and then on again I need to go through the whole verifcation process.
Can anyone help me out here and show me how to use this disk image to go back to how my computer was set up, please?

OK great. Thing is when I try to I keep getting the message: Could not unmount volume "/" (Resource busy)
What am I doing wrong?
I

How can i convert a .img disk image to a .dsk disk image?

I own an intel-iMac running MacOS 10.5.6.
I own both an Apple //c and Apple System Disk 4.0.2.
I now have an emulator called Virtual ][.
I also have a disk image of the Apple System Disk 4.0.2,
but it is in the .img format. I need it to be in the .dsk
format so the emulator can "see" the disk and run it.
How can I convert from .img to .dsk?
Thanks,
Apple //GS

have a look here:
http://discussions.apple.com/thread.jspa?threadID=246070

How can I create a disk image of snow leopard installer disk from my Imac which runs it?

how can I create a disk image of snow leopard installer disk from my Imac which runs it? It came without DVD installer, and I want to make a copy of it's OS installer but can't find out how.

You need to have the disc in order to create disk image of snow leopard installer disc. What did your machine ship with? If something later than SL, then why? If earlier, then you can buy the SL installer disc and make the disk image.

How can I create a bootable DISK IMAGE of my PB Internal Drive?

I would like to make a bootable image of my Hard Drive but without including any Free Space.
You see all I need on the image are the OSX and the programs, NOT the 60GB of Free Space. Disk Utility however wants to create a 80gb image which includes 60GB of Free Space.
I would like to use the Bootable image as a source image to use with the RESTORE function in Disk Utility.
Regards

You'll need a second machine or an external HDD with Mac OS X installed on it.
For purposes of this procedure I'll be calling your machine the 'source' and the second machine or your external HDD the 'target'.
First either boot the source into target mode by holding down the 'T' key while it boots. Once you see the FireWire icon on the screen, let go of the 'T' key and plug the source into the target. If you're going with the external HDD route, boot your source of off your external HDD.
Now, select the drive of your source machine, and hit Apple-I to bring up the information pane. Down at the bottom (in the permissions area) you'll see a check box labeled "Ignore ownership..." Uncheck that.
Open up Disk Utility. Select the source drive and run First Aid and Repair Permissions on it.
Now, select the File menu -> New -> New Disk Image from Folder. You're going to want to hit that big "New Image" button, but don't. Trust me. It'll only cause trouble for you down the road.
Select the source drive as the source. You can leave everything else the same and click "Image".
Select the target as the destination. Click Save.
Wait for a couple of hours (depending on how much stuff you have).
When it's done, select the Images menu -> Scan image for Restore.
Select the disk image you just made and click "Scan".
When that's done you have a restorable image. Just use the restore tab to restore it.
I've done this literally hundreds of times and it's worked every single time.

Disk images in Win XP ... how to ?

Similar Messages

Maybe you are looking for