Disk Images will not mount and Disk Utility will not runru

I am having some major problems with Disk Utility, Disk Images, and software update. First, Disk utility will not open or run. When I double-click the application icon, nothing happens, no message, nothing. I am running OSX 10.4.11. I have deleted diskutility prefs. I am able to run Disk Utility from the Startup DVD of Tiger. On first run, it verified and repaired permissions. I run verify and repair permissions several more times from Startup DVD and everything is fine. But Disk Utility on my startup HD will not work. Similary, NONE of my disk images will mount. No matter what Disk Image i try to mount, nothing will. And I cannot use Disk utility to mount them! So, no matter what I download, no images will mount. And thirdly, when I try to run software update, it will not work. I do get a message: it says, "Could not load Software Update." Finally, i tried to download Onyx to delete log files, etc.. but again, the disk image will not mount. I was able to install a dashboard widget called "maintidget" and was successful in running the daily, weekly, and monthly maintenance tasks. Can anyone help? Everything else works fine!!! All apps! Safari, Mail, iTunes, MS Office, everything works fine. Thanks for ANY help!

Previously, I had run verify permissions, repair permissions multiple times(from startup DVD) - no probems found. Deleted disk utility prefs. Run the maintenance taskes (daily, weekly, monthly). Nothing worked. But, I forget to check the drive for problems. So I ran disk scan. It found "invalid node" and repair disk could not do it. So, do I erase and do a fresh install or get DiskWarrior? I am running Leopard so I do not have Time Machine but I have backed up my documents, iTunes Library, iPhoto Library, etc... Another thing I found out the hardway is to sync all your bookmarks, mail settings and messages, etc... with .mac if you have an account. Any more suggetions?

Similar Messages

ATT hooked up new u-verse router, now time capsule does not work and airport utility does not see it ?

ATT hooked up the new U-verse router replacing the older 2wire router. Old 2wire router worked fine with Airport +Time Capsule. Now only the amber light flashes. When I try to reconnect with Time Machine it does not find the Time Capsule nor does the airport utility find the Time Capsule. Any help?

Okay, the 3801HGV also doesn't bridge - but there is a workaround. Info on the workaround comes from 'SomeJoe7777' at this link:
http://forums.att.com/t5/Residential-Gateway/U-verse-for-BUSINESS-2Wire-3600HGV- bridge-mode-or-another-AT-amp/td-p/2707013
As for connecting to your TC: the 3801HGV uses a default IP address of 192.168.1.254. It passes out IP addresses to your networked devices, and all of those IP addresses will be 192.168.1.something. The TC uses a default IP address of 10.0.1.1. As your primary router, if the TC's defaults weren't changed, the TC would be handing out addresses to your networked devices that are 10.0.1.something.
If your computer has an IP address of 192.168.1.something, it won't be able to see the TC if the TC's address is 10.0.1.1 (or anything else that's not 192.168.1.something). Hopefully that makes sense!
Go into System Preferences on your Mac, and click the Network icon. Click on Ethernet on the left side, and you'll be able to see what IP address your Mac has been given. My guess is that it has a 192.168.1.something address from the 3801HGV.
If I'm right about the 192.168.1.x address, and that your TC is running with 10.0.1.x addresses, then that's why your Mac can't see your TC. In this case, you need to change the Mac's Ethernet setup to manually set your Mac to a 10.0.1.x address for the TC to see. To do this, go to System Preferences, then Network, then click Ethernet on the left side.
Set the Configure IPv4 dropdown to 'Manually', and it will open up some places for you to fill in information:
IP Address: 10.0.1.15 (or a similar number that won't conflict with your TC's address, but starts with 10.0.1)
Subnet Mask: put in 255.255.255.0
Router: 10.0.1.1 (I'm assuming here that your TC was running with the default IP address; if it was something different, then set Router to whatever IP address your TC was using.)
Then, click the Apply button to make your changes active.
Now, since your Mac's IP address will be in the right "subnet" for your TC, they should be able to see each other. (It's kind of like having to live on the same block as someone to be able to talk with them. In general, if your computers don't have similar addresses, they can't talk to each other. Of course that's simplified greatly, but you probably get the idea...)
Once you've got the IP addresses matched up, you should be able to see your TC. At that point, you can update the TC to work with the 3801HGV. I recommend setting it to bridge mode, but if you can follow SomeJoe7777's advice, go for it!

Disk Image Won't Mount - Reason: Device Not Recognized

As I've searched the discussion forums, I've seen plenty of postings for "Disk Image Won't Mount" and for "Device Not Recognized" but not the way I'm seeing it on my laptop.
After a backup and restore, my mac will no longer mount any... and I mean any images. I have downloaded several security or software updates from different vendors and each .dmg file will not mount. I still have the .dmg files in hopes that after I get this problem solved, I'll be able to install them, but...
It always gives the same reason for not mounting and I'm at a loss on what to do next. I've run Software Update hoping it will be a quick fix, but have had no success.
Any suggestions?

I have a similar problem. Using FireWire disk mode, I put a disk image of my entire iBook onto my iMac as a back-up. (For an unrelated problem, Apple told me I needed to erase my iBook completely and do a clean install of the system.) Well, I screwed something up. I don't know what exactly--maybe I didn't "put away" the device correctly, but the next day when I flipped on my iMac, the disk image of my iBook was just gone, and not to be found anywhere. I finally succeeded in restoring the image using TechTool, which scanned the entire volume of the iMac for directory information. And it's all there, because the img file is more than 10GB. But when I double-click on it, I get the following error msg: "The following disk images failed to mount...reason--not recognized." I've checked the app it's supposed to open with, permissions, and run Disk Utility volume repair. No dice. Any ideas??? Did I mention that this is EVERYTHING I had on my iBook???

When I download the 3.6.3 version I get a warning pop up saying 'the following disk images failed to mount'. What do I need to do to stop this from happening?

After downloading the a pop up box called Warning appears with saying 'The following disk images failed to mount' and below that there is a table that has Image with a Firefox 3.6.3 and another field called Reason saying Corrupt image. The current version of firefox I am using is 2.0.0.7
== This happened ==
Every time Firefox opened
== Recently when trying to download a newer version

Firefox 3.0 and 3.5/6 versions require at least Mac OS X 10.4
http://www.mozilla.com/en-US/firefox/system-requirements.html - Mozilla Firefox 3.6 System Requirements
Firefox 2.0.0.20 is the last release that runs on Mac OS X 10.2 and 10.3
See http://kb.mozillazine.org/Installing_Firefox
Mac: http://download.mozilla.org/?product=firefox-2.0.0.20&os=osx&lang=en-US

Tried to download Opera Browser 10 and it says disk images failed to mount. reason,not recognized. What do I do to download this browser. using OS 10.4.11 and safari 4.1.3.Thankst sais

tried to download Opera Browser 10 and it says disk images failed to mount. reason,not recognized. What do I do to download this browser. using OS 10.4.11 and safari 4.1.3.Thankst sais

These are the requirements for various versions of Opera.
http://www.opera.com/browser/download/requirements/
Get the one that matches your Mac's.
http://www.opera.com/browser/download/?os=mac&list=all
Peter

I am connected to time capsule via wi-fi but air port says not connected and disk utility does not see it

I am connected to time capsule via wi-fi but air port says not connected and disk utility does not see it. I had it connected via ethernet and it still did not see it. Then i disconncectd it from ethernet and did the Wi-fi connection and am able to post this message but air port still does not see it.

Disk Utility will not "see" the Time Capsule, so no need to waste any more time on that issue.
but air port still does not see it.
Not sure what you mean by "air port" here.

HT3275 Hi, I have backed up 2 IMACs and one Mac Book Pro but for some reason, the 3rd IMAC come up with this problem: The backup disk image "/Volumes/Data/Anthony's iMac.sparsebundle" could not be accessed (error -1). Why? They computer system is up to da

Hi, I have backed up 2 IMACs and one Mac Book Pro but for some reason, the 3rd IMAC come up with this problem: The backup disk image “/Volumes/Data/Anthony’s iMac.sparsebundle” could not be accessed (error -1). Why? The computer system is up to date and I have had no issue with the other computers, just this one.
Many thanks
Anthony

Try this Discussion...
https://discussions.apple.com/message/18783684#18783684

Another OS 10.4.11 update problem - disk images won't mount?

Hi people,
Have never had to post on these boards as i've never suffered serious problems with my mac, until today.
Whilst installing/updating my powerbook to version 10.4.11 my mac seemed to crash so i rebooted my system. Probably not the best thing to do (i have little patience so was annoyed).
I'm guessing the update installed as my mac says it is now version 10.4.11 but when i go to mount any disk images it will not mount at all, but instead comes up with this message -
"The following disk image failed to mount
Reason - error 0xe00002c9"
I've verified and repaired the permissions on the startup drive in disk utility, and also verified the volumed and it says everything is ok in those departments. Although the option to repair the disk is not available for selection.
I've downloaded applejack, but obviously can't mount the image file.
Please help as this is a big problem with regards to my work and play!
Thanks for reading.

Hmm thank you for your time and effort on this problem BDAqua but unfortunately it still doesn't want to work! The 'DMG utility' program comes back with an error when trying to mount any of the disk images i have tried. I have been able to get up the script of what its doing in the 'console' application but that is ridiculously long, and i'd be lying if i said i have a single clue about what any of the script in it means!
So i'm guessing i'm gunna be archiving and re-installing. But this boads another question as i haven't a slightest clue about how to archive my files as i really don't want to lose any of it.
sorry BDAqua

Disk images failed to mount - codec overrun

Hi,
So after searching through the related posts I have been unable to correct my probelm, which is:
I am unable to open some .dmg files. I have tried to open three different .dmg files from a variety of sources and they all return the same error:
disk images failed to mount - codec overrun
However, I was able to update my system to 10.4.7 using the updater. This did not solve the problem. I then tried load the combo version of 10.4.7 as suggested in a different post and while it didn't load (I accidentally grabbed the powerPC version) it was able to open the .dmg and look in them.
Disk Utility is unable to attach the three that won't open. The first two Disk Utility was unable to verify or repair. The last (a cars game demo) was successfully verified but still came up with the codec overrun error when I tried to attach it. Finally I have tried removing the following two files and then restarting, to no effect.
/System/Library/Extension.kextcache
/System/Library/Caches/com.apple.kernalcaches/
I'd appreciate any help offered. A search on codec overrun was of no use. I searched for "mount failed disk images" and variations of that to find what I have already tried.
Thanks
Pete

I am havin the same problems. codec overrun
I am trying to download stuffit from their site so I can open a program for school.
I tried to download the dmg file from the apple site but was given the same error. Codec overrun
Also I attempted to get the updates from the Apple site.......same error.
So far this computer will not download much of anything without some kind of an error. Essentially this Imac is a $2000 jukebox. It does play music wonderfully.
My roommate was able to downlad easily from the same internet connection with no problem the windows version of the program from te same site.
This is a brand new out of the box iMac. 20" 1 gig 250 GB machine. First Mac for me and it is turning into a real headache.
Any help with the codec overrun would be appreciated.

"Time machine error, The disk image cannot be mounted" What can I do??

I ran the time machine. Then, "preparing backup" showed up for a long time. After that, a window pop out: "Time machine error, The disk image cannot be mounted" What is disk image? What can I do (I can't back up anything)
P.S. I use time capsule for backup. there were no problem on connection

I'm having the same issue. I do not have TC as my base station. It says right in the book that if you choose, you do not have to have it run as your router, just as a part of your existing wireless network. All software is up to date and I have already shortened the name of both my TC and TC disc to 6 characters and no spaces! I've already spoken with someone today about this. He really didn't know. Have tried backing up both wirelessly and directly connecting with an Ethernet cord. I had to finally call because when I attempted to register the product to get online support, apple.com didn't recognize the serial number!!! The gentleman on the phone got it registered for me. I bought the TC from an official apple store and for whatever reason when he put in the serial number his computer said that this TC was so "old" I guess that there was technically "no support." That basically means that even though my parents just purchased this for me a week before Christmas, that it was made a year ago and the warranty is not good?? I need to do more research on that. Right now I am very unhappy about this. I am a firm apple user and have been for years, but this is frustrating.
I had read somewhere else (not sure I've been searching apple for what seems like forever now) to make sure that the TC was showing up in "devices" of the Finder. Mine doesn't show up there, but rather in the "Network" window. Is this an issue? If it is, can anyone tell me how to fix that. I have Time Machine backing up to my TC, so I do not see why it would be.
UPDATE: I just opened up my TC on the "Shared" section of the Finder window and deleted the old "sparsebundle" (I had no clue that anything had backed up way back at 3:30pm on Dec 29) and now I get a slightly new message: Time Machine Error: The backup disc image could not be created." So now the word "mounted" is replaced with "created." This error showed up a lot sooner than the original one. Ok, no clue. I am going to try to Change the Disc again, and try again. I will post another update.
Message was edited by: kryzma

"Disk Images Fail to Mount/ OS X 10.4.10/Security Update 2007-006?"

Whilst downloading the most recent Mac OSX Update, 10.4.10 to a PPC G3, 600 MHz, with 1 GB SDRAM, I received an un-explained error message. Since then, my USB Web Cam doesn't function, some applications don't load, and I consistently get a Warning Message that disk images fail to mount as device not configured. Moreover, I got the distinct impression the aforementioned issues were related to the problem of installing Security Update 2007-006 which was roughly released at the same time.
How can I proceed to get matters back to normal? Would deeply appreciate advice from Apple Forum/Technical Support person(s) in all convenient speed. SOS!
Yours sincerely,
Joseph.
Power PC G3 Mac OS X (10.4.10) How do I uninstall the 10.4.10 update?

The problem took a somewhat bizarre twist when I got a phone call just after double clicking on a disk image file set to open with DiskImageMounter. When I came back from the phone call (about 2 minutes), the disk image was mounted, the MacBook wasn't frozen, and everything worked. With repeated testing, it now appears that both DiskImageMounter and Disk Utility hang for 65-75 seconds after starting the process of mounting a disk image and then complete the task successfully. Deleting the two cache files eliminates the hang (spinning beach ball), but only for a short while.

Cannot load 3.6 - disk image failed to mount - reason: corrupt image

Tried to load 3.6 and get the msg: disk image failed to mount. Reason: corrupt image.
== This happened ==
Every time Firefox opened

*Firefox 4 versions and later do not run on a PowerPC Mac.
*Firefox 4 and later require at least OS X 10.5 and an Intel Mac.
* http://www.mozilla.com/firefox/6.0/system-requirements/
For an unofficial Firefox 4 compatible version (TenFourFox) that runs on PowerPC Macs with OS X 10.4.11 or OS X 10.5.8 you can look at:
* http://www.floodgap.com/software/tenfourfox/
* http://tenfourfox.blogspot.com/2011/08/601-now-available.html
Firefox 3.6.x (Mac OS X 10.4 and later) can be found here:
* http://www.mozilla.com/en-US/firefox/all-older.html

HT3275 how do i fix this error - The backup disk image "/Volumes/My Passport/EDS MAC.sparsebundle" could not be created (error 1).

When trying to use Time Capsule on my passport I get this message
The backup disk image “/Volumes/My Passport/EDS MAC.sparsebundle” could not be created (error 1).

That should be a C9 or C17 error.. see
http://pondini.org/TM/Troubleshooting.html
Try rebooting everything.. as something has lost connection.. perhaps.
Make sure the disk is actually available in finder.. and try mounting it.

Download of 10.3.9 dmg disk image won't mount error 199

have 10.3.7 downloaded MacOSXUpdateCombo10.3.9dmg (to run lego star wars xmas present for kid) over 12 hours on slow, country dial-up, downloaded direct from apple web site, near completion power failed but download restarted from previous interruption point. when I try to open file get message "the following disk image failed to mount - reason error-199"
so can't use it - any solution?

have 10.3.7 downloaded MacOSXUpdateCombo10.3.9dmg (to
run lego star wars xmas present for kid) over 12
hours on slow, country dial-up, downloaded direct
from apple web site, near completion power failed
but download restarted from previous interruption
point. when I try to open file get message "the
following disk image failed to mount - reason
error-199"
so can't use it - any solution?
I have a suggestion -- call someone you know who has access to high speed internet and ask him/her to download the combo dmg file, put it on a CD, and mail it to you in an envelope. If you are not too far from an Apple Store, they might let you bring a CD in to do the same.
Otherwise, you'll need to re-do the download again because it no doubt was corrupted by the power failure. The starting over might have worked except for the reason for the interruption being a power failure, which is hard to recover from.

Disk image failed to mount.

Hi,
While updating the latest Intel update for a Macbook Core duo 1.83, the progress bar got stuck near the end and so I did 'force quit'. Ever since then I am unable to open .dmg files. I get this message " The following disk images failed to mount". " 'application name' broken pipe".
What can I do to fix this problem?

It's hard to say if your disk image problem is related to the force quit install. There are disk image problems with 10.4.9 that you can encounter even if the install was successful. I am running into them and so are some users reporting on MacFixit.com (scroll down to Disk Images Not Mounting).

Disk Images will not mount and Disk Utility will not runru

Similar Messages

Maybe you are looking for