Disk monitoring options for firewire connected hard drives

I recently connected a 750 gig Western Digital hard drive to my Mac via Firewire. I just learned that Disk Utility's S.M.A.R.T. capability will not monitor hard drives connected via Firewire or USB.
Does anyone have suggestions on 3rd party applications that might give me some piece of mind that the disk is in good health?
Thank you!

Hi David,
most (if not all) FireWire and/or USB connected external HDs don't report any kind of S.M.A.R.T. status. Even if they do, OSX has not implemented them.
See here:
http://en.wikipedia.org/wiki/Self-Monitoring%2CAnalysis%2C_and_ReportingTechnology
Even the third-party tools like SmartReporter or smartmontools can't get informations from FW/USB-HDs.
Only eSATA connected external HDs are supported.
Sorry
Stefan

Similar Messages

  • Disk cloning program for CNC machine hard drives ?

    We have Agie Wire EDMs and DMG 5 axis cnc mills.
    We are trying to make a clone copy of their hard drives.
    We have replacement hard drives.
    Which is the best software program to clone these hard drives?
    Thanks

    Hello,
    The Windows Desktop Perfmon and Diagnostic tools forum is to discuss performance monitor (perfmon), resource monitor (resmon), and task manager, focusing on HOW-TO, Errors/Problems, and usage scenarios.
    As the question is off topic here, I am moving it to the
    Where is the Forum... forum.
    Karl
    When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
    My Blog: Unlock PowerShell
    My Book:
    Windows PowerShell 2.0 Bible
    My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

  • I want to use the Thunderbolt connection for an external hard drive

    I want to use the Thunderbolt connection for an external hard drive - so what port would I use on the MacBook Pro 13" for the display monitor.  Thank you!

    This is not the forum for MacBook Pro owners.
    You just need to reformat the drive in Disk Utility and erase the drive and have  Mac HFS.
    If you did need to use NTFS then you would not want -3G but Paragon NTFS for OS X x. 10.0
    Or buy something that isn't pre-formatted to Windows NT file system.
    First though make sure you have backups of your system. TimeMachine being used now?
    http://macperformanceguide.com/Mac-TimeMachine-drive.html
    http://www.apple.com/support/timemachine/
    Maybe cleanout some files you don't need.
    Install a larger notebook hard drive even.
    http://www.macsales.com/firewire has a lot of choice in Mac compatible drives and enclosures so you don't need to worry about Fantom not working at some point.
    https://discussions.apple.com/community/notebooks/macbook_pro
    https://discussions.apple.com/community/mac_os/mac_os_x_v10.6_snow_leopard

  • Editing using a firewire external hard drive and a NTSC television monitor

    I have Final Cut Express 2 and use it with a firewire external hard drive and a NTSC television monitor.
    I have started to use iMovie with this same set up. I save my iMovie projects to an external hard drive and also have my miniDV deck connected via firewire with the composite outputs going into a 27 inch television so that I can get a better idea of what my colors and title safe framing, etc. look like.
    I have had some minor problems with this set up. Like stuttering video, audio tracks playing back when thay are "unchecked" and the "unexpectedly quit" deal.
    Thanks in advance!!!
    Frank

    iM uses a lot of harddrive space on the "start up"/internal disk, even when the project itself is located on some external drive.. make sure, you have at last 10 - 15GB free...
    .. and the goo' ol' stutter-problem, in detail discribed by Mastermind Karl Petersen: Stutter in iM5/6, causes and workarounds <<click

  • My iMac, OS 10.7.5, is abnormally slow on start-up, taking many minutes for my password sign-in window to show up.  I've run Disk Permissions and have verified my hard drive and all is in order.  What do I do to start up my Mac in a normal manner?

    My iMac, OS 10.7.5, is abnormally slow on start-up, taking many minutes for my password sign-in window to show up.  I've run Disk Permissions and have verified my hard drive and all is in order.  What do I do to start up my Mac in a normal manner?

    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Select the messages logged after the boot, during the time something abnormal was happening. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
    For example, if the problem is a slow startup taking three minutes, post the messages timestamped within three minutes after the boot time, not before. Please include the BOOT_TIME message at the beginning of the log extract.
    If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

  • Best Firewire External Hard Drive for Mac?

    I have been waiting for Thunderbolt Hard-drives to come out, but with none out yet, i need a fast and reliable 3TB External Hardrive for my macbook pro.
    I will be using it for All my Picture, Audio and Video Files
    Pictures - Photoshop Files, all raw jpegs ect.
    Video - Using in Final Cut X, HD Footage, ect
    Audio - Pro Tools Files, Reason 5, ect
    so i wanted a fast firewire but so far havent found anything good priced with good ratings.
    looking for a super deal, around $150 for 3TB External Hard-drive with Firewire
    Any Suggestions?
    Thanks

    I use two of these, a 1 TB and a 2 TB:
    http://eshop.macsales.com/shop/ministack/
    They have FireWire 800 ports, and that makes a huge difference.

  • Is it time for a new hard drive?

    My iMac early 2008 has been running extremely slow even after i reduced 320 gb hard drive so it only has about 150 gigs occupied now. 2 GB memory.  I just ran Disk Utility and it said it "stopped verifiying MacIntosh HD. This disk needs to be repaired. Start your computer with another disk." I haven't done that yet. I have everything backed up on Time Machine to an external hard drive. A friend says the HD is going bad and needs to be replaced. Is that right? All advice greatly appreciated.

    From the given information I'd find a more knowledgable friend. The first thing you need to do is repair your drive:
    Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    If the above indicates the drive is OK after repairs are completed, then you can focus on some maintenance to help improve performance:
    Kappy's Personal Suggestions for OS X Maintenance
    For disk repairs use Disk Utility.  For situations DU cannot handle the best third-party utilities are: Disk Warrior;  DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible. TechTool Pro provides additional repair options including file repair and recovery, system diagnostics, and disk defragmentation.  TechTool Pro 4.5.1 or higher are Intel Mac compatible;  Drive Genius is similar to TechTool Pro in terms of the various repair services provided.  Versions 1.5.1 or later are Intel Mac compatible.
    OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep.  Dependence upon third-party utilities to run the periodic maintenance scripts had been significantly reduced in Tiger and Leopard.  These utilities have limited or no functionality with Snow Leopard or Lion and should not be installed.
    OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems.
    I would also recommend downloading the shareware utility TinkerTool System that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc.  Other utilities are also available such as Onyx, Lion Cache Cleaner, CockTail, for example.
    For emergency repairs install the freeware utility Applejack.  If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the commandline.  Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. There is no confirmation that this version also works with Lion.
    When you install any new system software or updates be sure to repair the hard drive and permissions beforehand. I also recommend booting into safe mode before doing system software updates.
    Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
    Backuplist
    Carbon Copy Cloner
    Data Backup
    Deja Vu
    iBackup
    JaBack
    Silver Keeper
    MimMac
    Retrospect
    Super Flexible File Synchronizer
    SuperDuper!
    Synchronize Pro! X
    SyncTwoFolders
    Synk Pro
    Synk Standard
    Tri-Backup
    Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
    Additional suggestions will be found in Mac Maintenance Quick Assist.
    Referenced software can be found at CNet Downloads or MacUpdate.
    If none of the above help then try reformatting the drive and installing a fresh copy of Snow Leopard.

  • Disk Utility won't recognize new hard drive

    Hello,
    Thanks for taking the time to read this.
    The original hard drive (80 GB) went bad, so I replaced with a new 160 GB Western Digital one. I formatted the hard drive using Disk Utility from the Mac OS X Disk. It worked the first time I booted into Leopard (I just booted up to make sure the OS loaded...didn't install any new software and/or hardware).
    Then I shut it down and started it back up, and the computer didn't recognize the hard drive. I inserted the Mac OS X disk and ran Disk Utility, but the hard drive was not recognized.
    So now I'm thinking the new hard drive was also bad. So, I ordered another one (Seagate 160 GB) and it to was not recognized when I ran Disk Utility from the Mac OS X disk.
    When replacing all of them, I followed directions I found here and other websites. They all said to do it the same way, so I'm assuming the directions for replacing a hard drive in a laptop were correct.
    I searched Google and found several posts suggesting using an application called Disk Warrior, but from my understanding, you cannot run it from a disk, it needs to be installed, which is obviously impossible since the hard drive isn't recognized.
    Then I ran Open Firmware and did "devalias" from the prompt. From what I can tell in the list of hardware, the hard drive is recognized, but I am not sure. I took a picture of the screen printout but do not see an option to attached it to this post. Therefore, I'll just tell what it said for now and will create an image hosting account so I can add a URL for it later.
    In the list, "hd" is in the left column and in the right column of the same line is "/pci@f4000000/ata-6@d/disk@0" (without quotes).
    If anybody has any suggestions, they would be greatly appreciated.

    Welcome to the Apple discussions.
    I've replaced a few hard drives, and in instances where it's not recognized, it's either been a cable connection issue or I've seen others with a jumper issue. Either the hard drive to logic board cable isn't properly set, typically on the logic board side, or a jumper was left on the drive, where typically you can just remove it. I haven't personally had the cable fail, however, that's possible too.
    When you pulled the large plug from the back of the original hard drive, did you do it very carefully? It's not like a desktop hard drive plug that you can just pull out ... it needs to be wiggled out, gently. I have a hard time believing two new drives would be essentially DOA, although the first one worked for a bit, which leads me to wonder about the physical connections.
    Since you have your original OS X disks, you could try running the Apple hardware test to see if it gives you any error message(s).

  • I have a Power Mac G4 (2004) and want to transfer all my files to a new MacBook Pro 15.4". Can this be done thru firewire cable or do I have to transfer to an external Firewire 800 hard drive first?

    I have a Power Mac G4 (2004) and want to transfer all my files to a new MacBook Pro 15.4". Can this be done thru firewire cable or do I have to transfer to an external Firewire 800 hard drive first?

    Do it with a Firewire cable (buy a 800/400 adapter if you need it) - the USB transfer takes a much longer time.
    Start up your old PowerMac G4 holding down the "T" key, for target disk mode.
    On your new MacBook Pro open "Migration Assistant" in your utilities folder.
    Connect the 2 computers by firewire cable and follow the prompts in Migration Assistant.

  • Solutions for lots of hard drive space?

    Yes, this is a repost from my thread in the getting started forum, but I figured that this board is more heavily populated, and perhaps some professional videographers visit here more frequently to help me out, so I'm posting my question here as well. Here I go:
    Hello,
    Next spring and summer, I plan to be shooting and editing weddings. The past weddings I've done, I use about 12 tapes. ~200mb/min x 60 mins x 12 tapes is about 144GB. That's about 3 weddings in a single 500GB hard drive (and I plan on doing about 20 in a year). Obviously, I'm going to need a LOT of hard drive space. I don't want to consider entirely deleting the media after finishing a project because it seems common that clients wish to change little bits of the video, so I want to keep them for a while longer.
    Right now I have a 500GB HD in a firewire400 enclosure. I don't use the internal Mac HD for media.
    What a photographer said that others wedding videographers do and suggested to me was to buy as many HD's needed for the year (approx. so I guess about 7 if 500GB), set a deadline for those whiny clients for returns or re-edits and such, and at the end of the year, and reformat them all and reuse them for the next year.
    I'm thinking of doing the same, but using the same enclosure for all my hard drives, just unplugging and plugging as needed.
    I've heard of using a RAID system. I can't say I know much about using it but with what I'm using, I don't think it's an option? I am using a 17" 2.33ghz MacBook Pro with Final Cut Pro and I plan on getting an aluminum 24" iMac (probably 2.4ghz unless you can convince me otherwise) as a secondary editing machine, and perhaps to make the dreadful capturing process twice as fast.
    So some of my questions are:
    * can plugging and unplugging HD's to an external closure possibly damage the pins?
    * would storing HD's that are not being used at the moment be safe in those plastic containers that usually come with a HD when you buy one? Or would it be damaging to keep one in there and store it away for a year?
    * is this idea okay or would you suggest another method?
    * slightly off-topic but sometimes I take my external hard drive, put it in my laptop bag, and do some editing at another location. I know it's supposed to be portable but someone told me that external hard drives aren't meant to be taken around like that. Is that true or am I okay? It's just sitting sideways in the bag while I walk/drive, it's not like I'm hiking a mountain and dropping my bag.
    Thanks in advance for all your help.

    321estrellas wrote:
    - I wonder if enclosure manufacturers do special orders of JUST the enclosure without the cables and power adapter? Since I'll likely be buying the same one but plugging one at a time...(maybe one other for another computer)
    Not sure if they will or not. Of course, IMO, it is not bad to have an extra Power Adapter and cables (or more), just in case. You would be suprised how things can get misplaced or when you really would like another FW or eSATA cable. You can call some of these places and ask, it nevers hurts. I have had very good experiences with Firewiredirect, OWC/MacSales and Wiebetech, probably worth a customer service IM window with them or call or email. Worst they can say it is not possible.
    - Alternatively the Wiebtech SilverSata I enclosure seems pretty convenient and maybe I'll expand it with 6-8 additional trays...but again I may want to use another HD in another computer but I'm sure I can figure a way around that...
    If you get a G5 or MacIntel they all use the same drives so if you remove it from a tray you can put it in the computer. I like the SilverSata I because it is relatively small and light and I will often throw a 750gig Drive into a tray when traveling to have a place to capture things and keep copies of photo downloads, audio files for Soundtrack and other files which take up room and a partition for a boot/repair/restore disk for the laptop.

  • I am not much of a computer technician. I bought a time capsule thinking I could use this for an external hard drive and keep my MAC hard drive free. Was I mistaken? One I back everthing up on the TC, can I delete everything off of my MAC?

    I am not much of a computer technician. I bought a time capsule thinking I could use this for an external hard drive and keep my MAC hard drive free. Was I mistaken? Once I back everything up on the TC, can I delete everything off of my MAC and then use my TC as my hard drive??

    Once I back everything up on the TC, can I delete everything off of my MAC and then use my TC as my hard drive??
    TC was designed to backup your Mac. The TC literature is pretty clear about this:
    If your Mac's hard drive has a problem....it will sooner or later....you can use your backup on the TC to rebuild your Mac.
    But.....if you move all of your data to the TC from your Mac....you only have one version of that data now, and it is on the TC.
    Have you thought about what will happen when....not if....the TC has a problem?  Since the only version of your important data was on the TC, and the TC has failed......you lose all of your data.....because you have no backup.
    A much better plan would be to add a USB or FireWire hard drive and connect it directly to your Mac. Move the data on your Mac over to the hard drive.
    Then, the TC will backup both your Mac and the hard drive.  So, you have original data on on one drive and backups on another drive.
    That would be a minimum backup plan. Most of us have more than one set of backups.

  • Disk Utility not finding new internal hard drive

    Hi All
    My internal hard drive died recently and I replaced with a western digital drive from newegg..
    All the cables are hooked up correctly, including the orange cable attached to the hard drive. Problem is that when I go to install OS X, Disk Utility doesn't even list the drive. Is there something I need to do beforehand? Anyone have any ideas as to why Disk Utility isn't even seeing the drive? Jumpers maybe?
    Thanks in advance.
    -Aaron

    I doubt that any jumpers are needed, since this is the only (master) drive in the system. WD's site has pretty good info on this. Verify for yourself however.
    Also, from their site:
    How to partition and format an internal slave drive or an external drive in a Mac OS X (all versions).
    Answer
    In Mac OS X, you can use the built in Disk Utility to partition and initialize the drive so it will appear on the desktop.
    1. Open the main drive (the drive that contains the operating system).
    2. Open the Applications folder.
    3. Open the Utilities folder.
    4. Select Disk Utility.
    5. The drives are displayed on the left side of the window. Click on the drive that you wish to partition (the top drive listing for the hard drive that you want to work with).
    6. Once the drive is selected click on Partition.
    7. Click on the Options button to select the partitioning scheme.
    8. Click on Apple Partitioning Scheme or Apple Partitioning Map and then click on the OK button.
    9. You will see several options for setting up the drive. Once you have selected the number of partitions, the format type you want, and a volume label, click the Partition button.
    10. Following the completion of this process, the drive will appear on the desktop.
    Joe

  • FireWire external hard-drive

    Hi, I bought an external hard drive from Welland. It does USB 2.0 and Firewire 400. When I hook-up the drive to my mac mini, everyting is fine, it's work perfectly. But if I don't use it for a day or 2, the drive goes on sleep and when I try to access data on it, it's jam. The front light start to flash and I need to turn off and on. Then it's work. I try to remove the option to put the drives on sleep when possible but no better results

    Have you contacted Welland for some support? It's possible the drive is not functioning correctly. I have several FireWire 400 hard drives at home and the one plugged into my G4 Cube goes to sleep quite often without an issue like that when I wake it up. Is the drive powered by USB and/or FireWire?
    -Doug

  • FireWire External Hard Drive Workaround

    Scenario:
    1.) AirPort Extreme connected to Mac Mini via ethernet.
    2.) Mac Mini connected to a FireWire External Hard Drive.
    3.) MacBook Pro connected to AirPort Extreme via 802.11n (wireless).
    4.) AirPort Utility is administered from the MacBook Pro.
    Problem:
    Considering that the AirPort Extreme does not support a FireWire External Hard Drive, I was hoping to find a work around. Is there any way to indirectly access the FireWire External Hard Drive connected to my Mac Mini from my AirPort Utility administered from my MacBook Pro? Essentially I want to access files from the External Hard Drive on my MacBook Pro without being physically tethered to my Mac Mini or the External Hard Drive. That is, I would like to define the External Hard Drive as an Airport Disk in Airport Utility so I can utilize the Back To My Mac feature.
    Solution:
    Your solution goes here...

    That is, I would like to define the External Hard Drive as an Airport Disk in Airport Utility so I can utilize the Back To My Mac feature.
    No that won't work.
    If your Mac mini simply has File Sharing enabled you can get to the drive using Back To My Mac with no involvement of the AirPort Extreme base station (AEBS).

  • Firewire external hard drives no longer mount

    I had 2 firewire external hard drives connected, not always at the same time and not running all the time. Suddenly they won't mount. I have run System Profiler and it shows "No information Found". The drives themselves mount on my other Mac laptop.
    An external DVD writer, when mounted, shows up in profiler though not on the desktop. I have set the finder preferences to -show all mounted drives. System profiler lists all my USB devices. It's just the 2 Firewire hard drives that show no information found. The DVD writer works in either Firewire port.The hard drives are each made by a different manufacturer.
    I have re-started with everything off. I have hot swapped.
    Help-I need these drives to store photo files and print publications.
    Fairview
    iMac   Mac OS X (10.3.9)   G4
    iMac   Mac OS X (10.3.9)   G4

    fairview:
    The next step is to see if it is directory related and Repair Disk:
    Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
    Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
    Select your HDD (manufacturer ID) in the left panel.
    Select First Aid in the Main panel.
    (Check S.M.A.R.T Status of HDD at the bottom of right panel, and report if it says anything but Verified)
    Click Repair Disk on the bottom right.
    If DU reports disk does not need repairs quit DU and restart.
    If DU reports errors Repair again and again until DU reports disk is repaired.
    If DU reports errors it cannot repair you will need to use a utility like Tech Tool Pro or Disk Warrior
    Good luck.
    cornelius

Maybe you are looking for