Disk not working

Im trying to install windows 7 on my macbook pro using parellels. Everytime i insert a disk into the drive it wont read it. It says i have inserted a blank disk. i can hear it just spining and spining. I have hardly ever used this drive. What do i do? I need to get this program on my compuer for business. Thanks

Where did you get the disk from? Is it an authentic Windows 7 installer disk? Have you asked for support at the Parallels web site?

Similar Messages

My external hard disk not working properly in my macbook pro . anyone help me . its seagate hard disk

My external hard disk not working properly in my macbook pro . anyone help me . its seagate hard disk

You need to get some software that allows your Mac to read and write to the NTFS disk. There's a whole bunch of stuff out there, but this program has a good review, and you can try it for free. I would move everything off of your external drive, reformat it into Mac OSX extended, and use it for your Mac. You don't need NTFS anymore, unless you still have a Windows computer that needs it.

[SOLVED] Suspend to ram / disk not working in newer kernels

Hi all,
this puzzles me for a while:
My desktop system was able to suspend to ram / disk flawlessly in older kernels. It stopped working with 3.3. The suspend seems to work, the machine goes to standby. But when I try to resume, the machines is on but the screen stays black. Neither the console is working nor can I ssh into it. Only hard reset gets me out here
I did investigate and found many tips and hints which all led to nowhere. I even changed my filesystem back from btrfs to ext4 and my VGA module from proprietary nvidia to nouveau.
When this all failed I got to the idea to burn several install disks. One of the official 2011.08.19 (kernel 3.0.3) and one of the snapshots 2012.06.05_04-00-01 (kernel 3.3.7) and 2012.07.17_04-00-01 (kernel 3.4.4). I guess these can not be compromised by some hosed installation. I started one by one and issued the follwing command:
echo mem > /sys/power/state
which suspends the machine successfully in all three cases. With 2011.08.19 the resume is working but the other two fail. Some more info about the hardware:
1. lspci output
harvey@obelix ~ $ lspci
00:00.0 Host bridge: Intel Corporation Core Processor DMI (rev 11)
00:03.0 PCI bridge: Intel Corporation Core Processor PCI Express Root Port 1 (rev 11)
00:05.0 PCI bridge: Intel Corporation Core Processor PCI Express Root Port 3 (rev 11)
00:08.0 System peripheral: Intel Corporation Core Processor System Management Registers (rev 11)
00:08.1 System peripheral: Intel Corporation Core Processor Semaphore and Scratchpad Registers (rev 11)
00:08.2 System peripheral: Intel Corporation Core Processor System Control and Status Registers (rev 11)
00:08.3 System peripheral: Intel Corporation Core Processor Miscellaneous Registers (rev 11)
00:10.0 System peripheral: Intel Corporation Core Processor QPI Link (rev 11)
00:10.1 System peripheral: Intel Corporation Core Processor QPI Routing and Protocol Registers (rev 11)
00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06)
00:1a.1 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06)
00:1a.2 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06)
00:1a.7 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06)
00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 06)
00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06)
00:1d.1 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06)
00:1d.2 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06)
00:1d.3 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller (rev 06)
00:1d.7 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a6)
00:1f.0 ISA bridge: Intel Corporation 5 Series Chipset LPC Interface Controller (rev 06)
00:1f.2 IDE interface: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA IDE Controller (rev 06)
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06)
00:1f.5 IDE interface: Intel Corporation 5 Series/3400 Series Chipset 2 port SATA IDE Controller (rev 06)
01:00.0 VGA compatible controller: NVIDIA Corporation G84 [GeForce 8600 GT] (rev a1)
02:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03)
03:00.0 SATA controller: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 02)
03:00.1 IDE interface: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 02)
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06)
3f:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-Core Registers (rev 04)
3f:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 04)
3f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 04)
3f:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 04)
3f:03.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller (rev 04)
3f:03.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Target Address Decoder (rev 04)
3f:03.4 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Test Registers (rev 04)
3f:04.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Control Registers (rev 04)
3f:04.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Address Registers (rev 04)
3f:04.2 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Rank Registers (rev 04)
3f:04.3 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Thermal Control Registers (rev 04)
3f:05.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Control Registers (rev 04)
3f:05.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Address Registers (rev 04)
3f:05.2 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Rank Registers (rev 04)
3f:05.3 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Thermal Control Registers (rev 04)
2. lsmod output of 2012.07.17_04-00-01:
harvey@obelix ~ $ lsmod
Module Size Used by
fuse 68768 0
tun 15297 0
rfcomm 33627 8
bnep 8793 2
nfsd 246714 2
exportfs 3665 1 nfsd
btusb 11764 0
joydev 9991 0
bluetooth 190551 22 bnep,btusb,rfcomm
rfkill 15604 2 bluetooth
snd_hda_codec_realtek 60409 1
snd_hda_intel 24053 3
snd_hda_codec 94305 2 snd_hda_codec_realtek,snd_hda_intel
microcode 12185 0
i7core_edac 17477 0
snd_hwdep 6300 1 snd_hda_codec
i2c_i801 8180 0
iTCO_wdt 12813 0
snd_pcm 74958 2 snd_hda_codec,snd_hda_intel
r8169 49386 0
coretemp 5654 0
edac_core 36656 3 i7core_edac
iTCO_vendor_support 1929 1 iTCO_wdt
serio_raw 4653 0
pcspkr 1899 0
snd_page_alloc 7185 2 snd_pcm,snd_hda_intel
snd_timer 18966 1 snd_pcm
mii 4123 1 r8169
snd 58997 12 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_pcm,snd_hda_codec,snd_hda_intel
soundcore 5410 1 snd
acpi_cpufreq 5933 0
mperf 1235 1 acpi_cpufreq
evdev 9754 4
processor 26567 1 acpi_cpufreq
vboxnetadp 18387 0
vboxnetflt 16743 0
vboxdrv 1791382 2 vboxnetadp,vboxnetflt
nfs 276056 1
nfs_acl 2359 2 nfs,nfsd
lockd 62987 2 nfs,nfsd
auth_rpcgss 32327 2 nfs,nfsd
sunrpc 184998 12 nfs,nfsd,auth_rpcgss,lockd,nfs_acl
fscache 41059 1 nfs
aes_x86_64 7508 64
cryptd 8741 0
aes_generic 26138 1 aes_x86_64
xts 3101 32
gf128mul 6050 1 xts
dm_crypt 16496 4
dm_mod 70918 9 dm_crypt
sr_mod 14823 0
cdrom 35648 1 sr_mod
hid_logitech 16560 0
ff_memless 4690 1 hid_logitech
usbhid 36430 1 hid_logitech
hid 85285 2 hid_logitech,usbhid
sd_mod 29239 7
pata_jmicron 2480 0
usb_storage 44760 0
pata_acpi 3408 0
ata_piix 23160 5
crc32c_intel 1987 0
ahci 20549 0
libahci 20023 1 ahci
ata_generic 3295 0
libata 167611 6 ahci,pata_acpi,libahci,ata_generic,ata_piix,pata_jmicron
scsi_mod 132974 4 usb_storage,libata,sd_mod,sr_mod
uhci_hcd 23372 0
xhci_hcd 81440 0
ehci_hcd 40994 0
usbcore 147533 8 btusb,uhci_hcd,usb_storage,ehci_hcd,usbhid,xhci_hcd
usb_common 954 1 usbcore
floppy 58615 0
nouveau 784289 3
button 4502 1 nouveau
video 11307 1 nouveau
mxm_wmi 1425 1 nouveau
wmi 8475 2 mxm_wmi,nouveau
i2c_algo_bit 5391 1 nouveau
drm_kms_helper 33051 1 nouveau
ttm 64288 1 nouveau
drm 208926 5 ttm,drm_kms_helper,nouveau
i2c_core 20369 5 drm,i2c_i801,drm_kms_helper,i2c_algo_bit,nouveau
ext4 424175 4
crc16 1359 2 ext4,bluetooth
jbd2 73919 1 ext4
mbcache 5977 1 ext4
3. /var/log/pm-suspend.log of a not working suspend
Initial commandline parameters:
Tue Jul 17 11:21:18 CEST 2012: Running hooks for suspend.
Running hook /usr/lib/pm-utils/sleep.d/00logging suspend suspend:
Linux obelix 3.4.5-1-ARCH #1 SMP PREEMPT Mon Jul 16 21:35:54 CEST 2012 x86_64 GNU/Linux
Module Size Used by
rfcomm 33627 8
bnep 8793 2
nfsd 246714 2
exportfs 3665 1 nfsd
ext4 424175 3
jbd2 73919 1 ext4
mbcache 5977 1 ext4
btusb 11764 0
bluetooth 190551 22 bnep,btusb,rfcomm
crc16 1359 2 ext4,bluetooth
joydev 9991 0
rfkill 15604 2 bluetooth
snd_hda_codec_realtek 60409 1
microcode 12185 0
coretemp 5654 0
serio_raw 4653 0
snd_hda_intel 24053 5
snd_hda_codec 94305 2 snd_hda_codec_realtek,snd_hda_intel
pcspkr 1899 0
snd_hwdep 6300 1 snd_hda_codec
snd_pcm 74958 3 snd_hda_codec,snd_hda_intel
snd_page_alloc 7217 2 snd_pcm,snd_hda_intel
r8169 49386 0
i7core_edac 17477 0
snd_timer 18966 1 snd_pcm
edac_core 36656 3 i7core_edac
mii 4123 1 r8169
snd 58997 15 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_pcm,snd_hda_codec,snd_hda_intel
iTCO_wdt 12813 0
i2c_i801 8180 0
soundcore 5410 1 snd
iTCO_vendor_support 1929 1 iTCO_wdt
acpi_cpufreq 5933 0
mperf 1267 1 acpi_cpufreq
evdev 9754 4
processor 26567 1 acpi_cpufreq
vboxnetadp 18387 0
vboxnetflt 16743 0
vboxdrv 1791382 2 vboxnetadp,vboxnetflt
nfs 276056 1
nfs_acl 2359 2 nfs,nfsd
lockd 62987 2 nfs,nfsd
auth_rpcgss 32327 2 nfs,nfsd
sunrpc 184998 12 nfs,nfsd,auth_rpcgss,lockd,nfs_acl
fscache 41059 1 nfs
btrfs 710578 1
libcrc32c 1002 1 btrfs
zlib_deflate 20436 1 btrfs
aes_x86_64 7508 64
cryptd 8741 0
aes_generic 26138 1 aes_x86_64
xts 3101 32
gf128mul 6050 1 xts
hid_logitech 16560 0
ff_memless 4690 1 hid_logitech
dm_crypt 16496 4
dm_mod 70918 9 dm_crypt
sr_mod 14823 0
cdrom 35648 1 sr_mod
usbhid 36430 1 hid_logitech
usb_storage 44760 0
hid 85285 2 hid_logitech,usbhid
sd_mod 29239 7
pata_jmicron 2480 0
pata_acpi 3408 0
ata_piix 23160 5
ata_generic 3295 0
uhci_hcd 23404 0
crc32c_intel 1987 1
ahci 20549 0
libahci 20023 1 ahci
libata 167611 6 ahci,pata_acpi,libahci,ata_generic,ata_piix,pata_jmicron
xhci_hcd 81472 0
ehci_hcd 41026 0
scsi_mod 132974 4 usb_storage,libata,sd_mod,sr_mod
usbcore 147565 8 btusb,uhci_hcd,usb_storage,ehci_hcd,usbhid,xhci_hcd
usb_common 954 1 usbcore
floppy 58615 0
nouveau 784321 3
button 4502 1 nouveau
video 11307 1 nouveau
mxm_wmi 1425 1 nouveau
wmi 8475 2 mxm_wmi,nouveau
i2c_algo_bit 5391 1 nouveau
drm_kms_helper 33051 1 nouveau
ttm 64320 1 nouveau
drm 208958 5 ttm,drm_kms_helper,nouveau
i2c_core 20369 5 drm,i2c_i801,drm_kms_helper,i2c_algo_bit,nouveau
total used free shared buffers cached
Mem: 8173500 884060 7289440 0 3764 405872
-/+ buffers/cache: 474424 7699076
Swap: 8386556 0 8386556
/usr/lib/pm-utils/sleep.d/00logging suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave suspend suspend:
/usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01grub suspend suspend:
/usr/lib/pm-utils/sleep.d/01grub suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend:
/usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/75modules suspend suspend:
/usr/lib/pm-utils/sleep.d/75modules suspend suspend: success.
Running hook /etc/pm/sleep.d/90alsa suspend suspend:
/etc/pm/sleep.d/90alsa suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/90clock suspend suspend:
/usr/lib/pm-utils/sleep.d/90clock suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend:
/usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95led suspend suspend:
/usr/lib/pm-utils/sleep.d/95led suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend:
Kernel modesetting video driver detected, not using quirks.
/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/99video suspend suspend:
kernel.acpi_video_flags = 0
/usr/lib/pm-utils/sleep.d/99video suspend suspend: success.
Tue Jul 17 11:21:18 CEST 2012: performing suspend
This seems to be a kernel bug. Any input?
Harvey
Last edited by Harey (2012-08-06 13:51:49)

Another life-sign. The issue is still unsolved but I've come a little further. It seems to be a combination of more failures. The first one is USB hardware. I have a usb keyboard-mouse combo from Logitech (comfort cordless desktop). The USB bus does not wake up correctly when resuming from suspend. So my keyboard is unsuable. I put in a file /etc/pm/sleep.d/20_custom-ehci_hcd with the following content:
BUSES="0000:00:1a.7 0000:00:1d.7"
case "${1}" in
hibernate|suspend)
# Switch USB buses off
for bus in $BUSES; do
echo -n $bus | tee /sys/bus/pci/drivers/ehci_hcd/unbind
done
resume|thaw)
# Switch USB buses back on
for bus in $BUSES; do
echo -n $bus | tee /sys/bus/pci/drivers/ehci_hcd/bind
done
esac
The bus IDs were taken from /sys/bus/pci/drivers/ehci_hcd
When I start pm-suspend from a console (no X started) this seems to reanimate my keyboard while the screen stays black (with backlight on). I can type and reboot. Also I can ssh into the machine from my laptop.
Concerning the blank screen there seems to be a bug in both the proprietary nvidia modules as well as the nouveau driver. The nvidia folks have issued a new beta driver which seems to at least minimize the failures. This all concerns the nv50-family of nvidias cards. I have a GF8600GT which is one of these
I'll wait for this driver and then restart my testing. Until then - no suspend/hibernate
EDIT: Today's nvidia 304.32 is solving my issues - I can sleep again
Harvey
Last edited by Harey (2012-08-06 13:52:51)

I have compaq cq50. was VISTA upgraded to WIN 7. Recovery disks not working. BOOTMGR compressed

will not boot up. I have 2 recovery disks, the 1 of 2 will take but 2 of 2 disk doesnt run.

Hi:
If you are trying to use the Vista recovery disks and they are not working, and you can read your Vista product key on the bottom of your notebook, then you can make your own Vista installation disk by reading the guidance below.
If you're up to a slight but rewarding challenge you can make your own if you can read your 25 character Vista product key on the PC.
Just download the 3 files you need at the link below, and read all of the instructions to create a bootable DVD installation disk using imageburn.
Disregard the part of the text under the first screen shot about "extract the files to the Vista folder."
The files were already extracted to that folder when you ran the X14.exe file by reading the text on top of the first screen shot.
The other thing I noticed is on the 4th screen shot, where it shows Developer ID Microsoft Corporation. I had to type Microsoft Corporation in myself, and then the other codes automatically populated.
When I went to compile the ISO file, ImageBurn gave a message that about a WIM file and ISO, and if I wanted to burn it in a different format.
I selected No, make the ISO file.
It was not that hard to do. I burned both the 64 bit disk and the 32 bit disk in case I ever need them.
I tested both of them an my hp dc7100 CMT desktop PC, they worked perfectly.
When you enter the product key, it knows what version of Vista you have.
http://en.community.dell.com/support-forums/software-os/w/microsoft_os/3317.2-3-microsoft-windows-v....
After you successfully install Vista, you can then install the drivers from your PC's support and driver page.
Paul

Mount UFS disk not working

Hi,
I am new to Solaris so this may be something simple I have missed. I am having troubles mounting a MO (magnetic Optical) disk on my Solaris 9 X 86 workstation.. I have just loaded the Solaris operating system, in the workstation I have an internal MO drive connected to an internal PCI SCSI card. I know the drive is working because I can format and create a newfs on disks, then mount read and write to the disks I have just created. I mount the disk by using the following command.
# mount /dev/dsk/c0t6d0s2 /mnt/mo
When I try to mount a disk MO formatted on another Solaris system using the same command I get an error
# mount /dev/dsk/c0t6d0s2 /mnt/mo
mount: /dev/dsk/c0t6d0s2 is not this fstype
I have tried to change the fstype to autofs in the vfstab file but this would not work. I have a Linux box with the same hardware installed and I can mount both MO disks (mine and ones formatted on other systems) by using the following command:
mount -t -ufs -o ufstype=sun /dev/sda /mnt/mo
I can read and write to both MO disks in Linux (after complilng the kernel with WR support for UFS in Linux) but not in Solaris.
Can anyone give me hints as to why I can not mount the disks from other Solaris machines?
Do I need to add other file system support?
Can I do some checks on the MO disk to make sure it is compatible?
Thanks in advance for any assistance.

Thanks for your responce.
I have 2 new solaris X86 boxes which I have just built. Our customer sends us data on MO disks formatted in UFS from their solaris 8 SPARC boxes. If what you are saying is true, it may not be possiable to read the MO disks on my X86 solaris box then.
All of the disks I am trying are 512 bytes/sector (4.1GB or 2.3GB).
I have not tried Solaris 10 but if may be worth a go before I go out and buy a SPARC station.
When I do the following commands this is the output I get:
On the UFS formatted on a SPARC station
#fdisk -w /dev/rdsk/c0t6d0p0
# (returns with no errors. I also tried s2 instead of s2)
#prtvtoc /dev/rdsk/c0t6d0s2
* /dev/rdsk/c0t6d0s2 partition map
* Dimensions:
* 512 bytes/sector
* 31 sectors/track
* 4 tracks/cylinder
* 124 sectors/cylinder
* 32047 cylinders
* 32045 accessable cylinders
* Flags:
* 1: Unmountable
* 10: Read-only
* Unallocated Space
* First Second Last
* Sector Count Sector
* 124 3973456 3973579
* First Second Last
* Partition Tag Flags Sector count sector mount dir
2 5 01 0 3973580 3973579
8 1 01 0 124 123
#fstpy /dev/dsk/c0t6d0s2
Unknown_fstype (no matches)
Drive formatted on my X86 box
results were teh same exept:
# fstyp /dev/dsk/c0t6d0s2
UFS
In conclusion does this mean that we can not read the disks formatted on the SPARC boxes?
Do you know of anything else I can try?
Thanks in advance.

Aperture Install Disk not working, How can I download it?

I have just had to replace my hard drive in my iMac and now have to reinstall Aperture 3.
I have the disk but my computer doesn't seem to want to read it. I have the serial number etc. still and the only options i can see suggested is to downloand the trial. However, that is no longer available, is there a way that i can do this without purchasing this again??
Thanks

I have the disk but my computer doesn't seem to want to read it.
Does the disk not mount at all, or does the installer not run and you get an error message?
"check with the developer to make sure Aperture works with this version of Mac OS X" .
Some of the older installer DVDs give his error message, because a developer certificate expired. This easily solved by resetting the date before installing, see the thread below.
Re: Install failure for Aperture 3 on my MacBook Pro. Operating on Lion.
If the installer disk does not mount, try to read it on another computer and create a disk image from it. Perhaps somebody can let you borrow another computer for this?
What was the Aperture version you have been running before the crash? If it has been Aperture 3.5.1, you should be able to download it from the AppStore, Purchased tab.

Recovery disks not working

I have an HP G60 Notebook PC, Product # NW144UA#ABA
The computer got a virus and couldnt open Microsoft Office applications so I wanted to restore it to the original factory settings. I created my own set of recovery disks (used 3 DVD-Rs). I started the recovery manager and followed the steps, the first disk worked just fine then popped out and asked for the second. I tried to put in the second disk (correctly labeled from when it was made) and it said the disk is not good, please insert disk #2. I have tried this several times and same thing. Now I can't even get back to the regular computer. When I turn it off or cancel the recovery manager it comes up with a black screen saying BootMGR not working (or something.. cant remember exact words). At one point in trying the recovery manager I got an "error 1002 please contact HP" message. I have tried to keep inserting disk #2 and after 20 times it still wouldnt work. I have tried to call HP customer service and was told I could buy recovery disks, but shouldn't my disks work? Please help!!!

Hi:
Sometimes the recovery disks don't work that you make for one reason or another.
Unfortunately, there are hundreds of posts like yours and unfortunately, very few answers. I have yet been able to help someone get their recovery disks to work.
So, I see that you may have two options (only one if you can't read all 25 characters of the Vista product key on the bottom of your PC:
1. Order a set of HP recovery disks and hope they work.
2. Make your own plain windows vista installation media if you can read your vista product key.
This will NOT restore your PC to factory condition. It will only install the operating system, and you will need to either have your program installation files and also use whatever downloads and drivers are available from your notebook's support and driver page.
Start from page 289 at the link below.
http://philipyip.files.wordpress.com/2013/01/windows-reinstallation-guide-03-03-2013.pdf

Repairing permissions on a raid startup disk not working.

Noticed that disk repair and permission repair do not work on a raid disk. Is there a fix?

Known issue with Lion.
Command line will work for now:
diskutil repairPermissions /

Recovery disks not working for Satellite L350

I have a Toshiba Satellite L350 which I bought some years ago
Originally it was a vista home premium laptop and I opted for the Toshiba windows 7 upgrade and its been pretty much trouble free .
However recently something went a bit weird and things just were not working well (it would not always log you out and never seemed to shutdown correctly) and various other applications did not run correctly.
After a few uninstalls ,reinstalls, scans and Microsoft patches did nothing I decided to take the plunge and use the recovery disk.
I had bought one from Toshiba when I got the machine originally and had made one myself before the upgrade to windows 7 and one again after.
I still have the windows 7 upgrade dvds so I can apply them after if I had to start back on vista again.
The only other big change has been a RAM upgrade to 4gb - I still have the original RAM if I need it but before all this there were no hardware issues reported and chkdsk was fine also.
So to me it was the o/s that was the problem.
I have now tried all the recovery disks and they all have the same problem reporting that imagex cannot uncompress the second file image as it is corrupt at block 90 I dont have this actual message to hand
but can update later.
I cant see that Im doing anything wrong as all i do is put the dvd in the drive and restart the laptop with F12 to boot off the recovery DVD and follow the on screen commands.
Have you any reports of such of this previously or am I doing something stupid?
Thanks

Thats very strange that al recovery discs show the same error message. As far as I know when you start recovery image installation the HDD will be formatted, new partitions created, recovery image copied on second HDD partition and as last step is recovery image installation.
>I had bought one from Toshiba when I got the machine originally and had made one myself before the upgrade to windows 7...
Have you tested both of them in the past?
Generally speaking all you do is right. In my opinion the problem can be recovery image itself or maybe HDD has some failure on certain sectors.
If you can obtain second HDD somewhere exchange it, set BIOS to default settings and test recovery installation again.

Recovery Disks Not Working - Windows 8

Hi,
This relates to my G6-2240sa HP Pavilion, bought 14 months ago, preinstalled with Windows 8 (later upgraded to 8.1)
Just out of curiosity I installed Linux Mint, hoping to dual-boot my system.
In the process I have wiped out everything on my HD.
I didn't mind that so much, as a fresh install of Windows 8 would have been welcome.
But now I find that the recovery disks (4) that I created are not working.
Whichever of the three options I choose (and I have tried them all) the process grinds to a halt, becoming unresponsive at anything from 7% to a max of 34% on the second disk. Then I am confronted with "The destination Drive is not Connected"
(I presume it means my hard drive. What on earth had it been doing for three hours, to suddenly discover that?)
I have run the HP PC Hardware Diagnostics UEFI thorough disk test and it comes up as Long DST: Passed, Memory Quick Test: Passed.
Started the recovery process from the bios defaults, using the optical drive as the first boot device, which only managed to reach a max of 17% before freezing. Strangely, the better results of 34% came from using a USB external DVD)
I have been through most of the other posts on here to find a solution, but none of them seem to apply to my specific problem.
Took it back to PC World, where I was informed that my best bet would be to buy a set of Recovery disks for my Model, Serial number, Product ID, obtainable from the Netherlands at a cost of £42, and I am waiting for them to arrive now.
Now I'm wondering, at the risk of throwing good money after bad, would it make more sense to buy new Windows 8 software or a different computer?
Surely having paid for a system that claims to offer security in the form of a recovery procedure, I am entitled that it should work as claimed.
After more than a week I'm at my wits end as I cannot use any of my programs without a Windows platform.

Success!
Although I have to say that with a poplation of over 7 billion I did think that my problem would have attracted more response than just one reply.
However, my thanks to Indypat for that. You gave me the hope to keep trying.
I read your solution from your link Pat, removed the SSD (taping the bare connectors, just in case), did all the other things suggested and tried again. Twenty more times! Still no go.
Was just surfing the net to find the cheapest OEM to buy, when the mailman (We call them postmen) arrived at last with the recovery disks I had ordered.
Started the process at 10 am ( I think I had to replace the SSD first to authorize the process) and by 4 pm recovery was complete! So my conclusions are that the recovery disks I made, did not work. Don't ask me why - I made them all according to the instructions - maybe the medium was faulty?
Now, (and for the foreseeable future as far as I can see) I shall continue updating Windows and reinstalling all my precious programs.
Still, after two weeks' cast into the outer darkness, at least I have clean Windows.
I'm glad you got your own problem sorted at last Pat. Like yourself, I am an HP fan. (again)

Hp recovery disks not working- will not reboot

I have an hp envy ultrabook touchsmart model 14-k033TU. About a week ago the laptop decided to shut down and perform an update. It was bed time so I let it do it's thing. During then update it may have switched off as it was not plugged in ?ran out of power. When I next tried to switch it on a blue screen appeared with a sad emoticon with the message "your pc ran into a problem and needs to restart. We're just collectinng some error info...". I cannot read the source of the error as it flashes by too quickly. It alternates between this blue screen and a black one that says "preparing automatic repair".
I called hp after trying a few solutions online, several of which weren't applicable as it will not start normally. It just loops between the two screens. They sent me some recovery disks but I had to purchase a usb cd/dvd drive to use these. I put the first disk in and nothing happened. I pressed esc and tried to boot from disk as someone suggested but it did not work. The loop continues. I am not sure what I else I can try. I guess it's deeply corrupted now. Any ideas?

Hi @Yana5789
I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post serial numbers and case details.
If you are unfamiliar with how the Forum's private message capability works, this post has instructions.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Grey Screen on Start up and Hard disk not working

Hi , I was working and suddenly some popping noises came out of the hard drive. I tried to save my work but i couldn't because it got "stuck". I had to turn it off and when I restarted a grey screen appeared without the apple logo. It won't start up and starting from cd, safe mode, single user mode don't work. I reset the PRAM too and nothing works. I'm worried about recovering the data... what should I do? I have work there that i need!!!
thanks

thanks for your reply. I took my powerbook to 2 apple authorized technical service and both of them told me that they couldn't get the data using disk warrior.
I already removed the hard drive and replace it with a new one. However I still want to recover data. I plug the hard drive to my home powermac with a usb connector and using disk utility and terminal i was able to "see" the drive but not mount it. In disk utility the drive appears as 0 bytes.
I want to try using Terminal or Single user mode to mount the hard drive, and/or repair it and try to recover some important files that I urgently need. Do you know how?

WRT610N New Firmware Upgrade and USB Hard disk not working

Hi, I've just upgraded the new firmware, everything seems fine but now my USB Hard disk is not recognizable unless i restart the router. I have a Seagate FreeAgent 500Gigs, and it worked perfectly with the previous firmware. Just wondering if its just me or anyone else has the same problem.
Thanks
I forgot to add that afterawhile the hard disk isnt recognizable again and i have to reset it to get it working
Message Edited by jellydish on 02-13-2009 06:09 AM

The same thing is happening to me... After the HDD goes to sleep, when you goto access it again you can hear it spin up but you still can't access it at all.

External hard-disk not working with firewire under Snow Leopard

Hi. I have a LaCie d2 external hard-disk that has Firewire 800, 400 and usb2. I previously used it on my old (angle-poise) iMac connecting using the Firewire 400 socket. I've just a got a new mac with Snow Leopard and I thought it would we best to connect to the LaCie with Firewire 800. However when I do this, the disc mounts ok, but browsing in the Finder is really slow and copying files from the disk to the imac seems to work at a really slow rate (less than USB1 speed) if at all ! However, I switched to using the USB2 connection instead and it works like a dream. What gives ? Is Firewire in Snow Leopard buggy ??

There's no problem with the drive.
Maybe true, and the drive would probably work fine with Leopard. One thing that's obvious is that Apple did make changes in the way that FireWire works in Snow Leopard. Many drives and drive manufacturers work well with SL, but there have also been reports of firmware issues by Western Digital and other companies.
Have you checked with your vendor to see if they are offering a firmware update for your drive?
BTW, I got a new FW case a few months ago while at a Fry's electronic store. The brand new USB2 and FW400 cables worked fine. The FW800 cable did not, but another cable came to the rescue. Just saying...

N900 Hard disk not working

Hi,
I had dropped my n900 twice and after the second fall it stopped working.
On giving it for repairs i was told that the hard disk is now corrupt and its not replaceable here.
Right now the phone can on dial and recieve phone calls.
I am not able to recieve or send messages or perform any other action.
The device shows only 60mb memory and even after putting a 2gb memory card no other function works.
Is there any solution to this.
Please help.
Thanks.
Solved!
Go to Solution.

The EMMC is what's called SMT in tech jargon. (Surface Mount Technology) i.e it's soldered to the surface of the board rather than having pins that go through holes. Makes it extremely difficult if not impossible to remount. There's probably someone out there who could resolder it, I've heard rumor of a company that can resolder the USB port when that comes adrift, I'm not sure who it is though. I don't think it's possible to run the O/S from MMC either.

External hard disk not working

Hi, i have a hard disk that is connected via usb. It worked recently and still does on a PC but not accessible or even showing in iMac. Anybody know what i have to do to get it working again?

How is the disk formatted and has it ever worked on your iMac? I suspect it's formatted for the PC as NTFS which OS X will read but not write to. If you must share this disk with both your PC and Mac then you should first determine how it's formatted and if it can be shared. In the event it's formatted as most external HD's for NTFS then I'd recommend downloading and installing NTFS-3G will allow the Mac to write to it. You can find this at:
http://www.macupdate.com/app/mac/24481/ntfs-3g
If it's a simple matter of not being seen by the Mac then try resetting the SMC, don't be afraid to reset it 2-3x if the first time doesn't work.
SMC RESET
Shut down the computer.
Unplug the computer's power cord and all peripherals.
Press and hold the power button for 5 seconds.
Release the power button.
Attach the computers power cable.
Press the power button to turn on the computer.
PRAM RESET
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

Disk not working

Similar Messages

Maybe you are looking for