Disk Permissions after update

Every time a security update or OS update in Tiger is finished and I run Disk Utility to check permissions, Shockwave always needs the permissions changed.
Is Shockwave a problem? Do I have a damaged version? I do not seem to have any issues, but this does seems a bit odd.

No no need to worry on that really, it's just a disagreement between the APP setting what t thinks rights should be, and what is stored in the Library Reciepts folder that DU uses, there are about a have dozen other ones that do the same.
Spurious repairs I think they call them, but no effect in the end.

Similar Messages

After clean install of Mountain Lion 10.8.5 no Gate Keeper and a ton a long list of differences in verify disk permissions after updating to Itunes 12.1

HI everybody.
I have a MacBopok Prop 15" from mid 2012, 2.6Ghz, Intel Core i7, 16GB RAM 1 TB SSD.
As my Mac was running as fast as possible it was getting slower down during start and shutdown, from 2 secopnds to 15 secconds during start and shutdown . Apps were crashing sometimes a freeze, total crash which made me go directly to Recovery HD and not my log in page after all the tricks I know I took it to service center where they zeroed my SSD HD and reinstalled Mountain Lion 10.8.5. Strangly enough Gate keeper was not in my preferences and a old version of Itunes 10.4 if I recall. The Mac is still slow while I reinstall all apps from App store and one for one documents and folders from my latest TM back up.
Updated the Security update, and other updates had the same problem as many updating Iphoto 9.4.3 error 102, still have not been able.
But running verify disk permissions there is a massive list of Itunes differences while I have not even added one song. At least 60 to 70 differences. I know a lot of these differences are nothing to worry about but a clean install without Gate keeper and an old Itunes which after update to 12.1 has so many disk differences, this can not as it should be also as I have not added anything from my Itunes library. Any feedback or advice would be very much appreciated.
Greetings
Matt

Do a backup. Boot to the Recovery Volume (command - R on a restart or hold down the option/alt key during a restart and select Recovery Volume). Run Disk Utility Verify/Repair and Repair Permissions until you get no errors. Then re-install the OS.
OS X Recovery
OS X Recovery (2)

Special Permissions after Update?

So what gives? No more special permissions after update?
IE: WIdgets, doc, etc.
-Tim

Disk Utility no longer reports the special permissions when verifying or repairing your permissions in Mac OS X 10.46; the list of special messages may be available by opening the Console in the /Applications/Utilities/ folder and looking at the logs.
(11486)

Disk permissions after leopard update software is installed

after installing osx 10.5 updates to 10.5.1 i got several suid warnings on disk permission verify which could not be fixed. i also got a lot of acl found but not expected messages for many files.
the only suid warning which apple tells me they are aware of is the one for apple remote desktop update. the question is why is that update available to computers which do not have apple remote desktop installed?
the other question i have is since this is a brand new imac which only has the leopard operating system installed, why do i get all of these suid and acl mesages when i run disk permissions verify. the repair permissions will not repair any of these files.

sorry for the delay in responding, but have decided to stay with tiger until the leopard software becomes more mature.
appreciate your response and my apologies for the delay in responding.

You May Want to Repair Disk Permissions After Printer Updates Today

It's been pretty automatic for quite a while--install printer updates and then repair disk permissions. Most of the time, the permissions errors aren't critical and everything still works; however, many people like to keep their boot disk permissions fixed.
After installing "HewlettPackardPrinterDrivers2.7.2" and "BrotherPrinterDrivers2.7" today I again repaired permissions. The errors weren't critical, but I can't remember seeing more of them than I did today. Make sure and scroll the list of errors because if you don't have scroll bars showing all the time, it doesn't look like there is much in the way of errors. When I didn't see a scroll bar, I assumed there were only a few errors--wrong.
My installation was on a Lion system. And, Disk Utility did fix them all. None were there when I repaired permissions a second time.
Just an FYI.

Which MacBook model? Did it come with OSX 10.6 or did you upgrade it?

Constantly having to repair disk permissions after hanging system

From the time I purchased this I've had ongoing issues with the java, flash, OS updates causing the computer to hang forever. Sometimes I end up having to press the off button because Command Q and Command/Option/Escape won't allow a force quit even after a 20 minute wait. I don't know enough about what's going on behind the boot up to know what's wrong. Here is a copy of my console log and this is exactly what they look like each time after I have gone in and done a disk verify, (says it's okay) and then repair disk permissions. I've had to boot to safe mode 3 times today and repair permissions due to this issue. There is nothing plugged into the computer except the power cord. The OS is up to date per Software Update and the only 3rd party software installed is SKYPE ...
1/25/11 5:45:58 PM SoftwareUpdateCheck[520] Checking for updates
1/25/11 5:45:58 PM storeagent[524] port created
1/25/11 5:46:27 PM com.apple.launchd[1] (com.apple.suhelperd[522]) Exited with exit code: 2
1/25/11 5:46:27 PM com.apple.launchd.peruser.501[88] ([0x0-0x3d03d].SoftwareUpdateCheck[520]) Exited with exit code: 102
1/25/11 8:21:42 PM [0x0-0x52052].com.skype.skype[613] Main starting with pid 613 parent pid 88
1/25/11 8:21:43 PM Skype[613] SkypeApplication::init called
1/25/11 10:56:56 PM com.apple.launchd[1] * launchd[1] has started up. *
1/25/11 11:09:29 PM com.apple.fontd[70] FODBCheck: foRec->annexNumber != kInvalidAnnexNumber (0)
1/25/11 11:09:31 PM com.apple.WindowServer[72] Tue Jan 25 23:09:31 Troy-Lindstroms-MacBook.local WindowServer[72] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
1/25/11 11:09:32 PM com.apple.fontd[70] FODBCheck: foRec->annexNumber != kInvalidAnnexNumber (0)
1/25/11 11:09:40 PM com.apple.UserEventAgent-LoginWindow[79] ALF error: cannot find useragent 1102
1/25/11 11:09:40 PM com.apple.UserEventAgent-LoginWindow[79] plugin.UserEventAgentFactory: called with typeID=FC86416D-6164-2070-726F-70735C216EC0
1/25/11 11:09:40 PM com.apple.launchd.peruser.501[90] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
1/25/11 11:09:42 PM fontd[100] Database content version mismatch (stored(15) != expected(14))
1/25/11 11:09:47 PM com.apple.launchd.peruser.501[90] (com.apple.Kerberos.renew.plist[108]) Exited with exit code: 1
1/25/11 11:10:09 PM com.apple.coreservicesd[44] ThrottleProcessIO: throttling disk i/o
1/25/11 11:10:12 PM com.apple.coreservicesd[44] ThrottleProcessIO: throttling disk i/o
1/25/11 11:10:13 PM com.apple.launchd.peruser.501[90] (com.apple.AirPortBaseStationAgent[110]) Exited: Killed
1/25/11 11:10:14 PM com.apple.loginwindow[22] shutdown: / is busy updating; waiting for lock
1/25/11 11:10:33 PM com.apple.launchd[1] * launchd[1] has started up. *
1/25/11 11:11:24 PM com.apple.UserEventAgent-LoginWindow[81] ALF error: cannot find useragent 1102
1/25/11 11:11:24 PM com.apple.UserEventAgent-LoginWindow[81] plugin.UserEventAgentFactory: called with typeID=FC86416D-6164-2070-726F-70735C216EC0
1/25/11 11:11:24 PM com.apple.launchd.peruser.501[90] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
1/25/11 11:11:28 PM fontd[101] Database content version mismatch (stored(15) != expected(14))
1/25/11 11:11:28 PM fontd[101] Failed to open read-only database, regenerating DB
1/25/11 11:11:34 PM com.apple.launchd.peruser.501[90] (com.apple.Kerberos.renew.plist[111]) Exited with exit code: 1
1/25/11 11:11:40 PM com.apple.fontd[101] FODBCheck: foRec->annexNumber != kInvalidAnnexNumber (0)
1/25/11 11:11:48 PM com.apple.fontd[101] FODBCheck: foRec->annexNumber != kInvalidAnnexNumber (0)
1/25/11 11:11:49 PM [0x0-0x9009].com.skype.skype[116] Main starting with pid 116 parent pid 90
1/25/11 11:11:51 PM Skype[116] SkypeApplication::init called
1/25/11 11:38:12 PM com.apple.WindowServer[69] Tue Jan 25 23:38:12 Troy-Lindstroms-MacBook.local WindowServer[69] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
1/26/11 11:36:13 AM [0x0-0x6d06d].com.skype.skype[666] Main starting with pid 666 parent pid 90
1/26/11 11:36:14 AM Skype[666] SkypeApplication::init called
1/26/11 12:25:04 PM com.apple.launchd.peruser.501[90] ([0x0-0x6d06d].com.skype.skype[666]) Exited: Terminated
1/26/11 5:45:58 PM SoftwareUpdateCheck[867] Checking for updates
1/26/11 5:45:58 PM storeagent[870] port created
1/26/11 5:47:17 PM com.apple.launchd[1] (com.apple.suhelperd[869]) Exited with exit code: 2
1/26/11 5:47:17 PM com.apple.launchd.peruser.501[90] ([0x0-0x92092].SoftwareUpdateCheck[867]) Exited with exit code: 102
1/26/11 8:32:58 PM [0x0-0x11011].com.apple.Safari[143] Wed Jan 26 20:32:58 Troy-Lindstroms-MacBook.local Safari[143] <Error>: unknown error code: invalid drawable
1/26/11 8:32:58 PM [0x0-0x11011].com.apple.Safari[143] Wed Jan 26 20:32:58 Troy-Lindstroms-MacBook.local Safari[143] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
1/26/11 8:33:10 PM [0x0-0x11011].com.apple.Safari[143] Wed Jan 26 20:33:10 Troy-Lindstroms-MacBook.local Safari[143] <Error>: unknown error code: invalid drawable
1/26/11 8:33:24 PM [0x0-0x11011].com.apple.Safari[143] Wed Jan 26 20:33:24 Troy-Lindstroms-MacBook.local Safari[143] <Error>: unknown error code: invalid drawable
1/26/11 10:48:32 PM com.apple.launchd.peruser.501[90] ([0x0-0x11011].com.apple.Safari[143]) Exited: Terminated
1/26/11 10:49:37 PM com.apple.launchd[1] (com.apple.suhelperd[1047]) Exited with exit code: 2
1/26/11 10:49:44 PM com.apple.launchd.peruser.501[90] (com.apple.AirPortBaseStationAgent[113]) Exited: Killed
1/27/11 11:39:52 PM com.apple.launchd[1] * launchd[1] has started up. *
1/27/11 11:40:14 PM com.apple.launchd.peruser.501[84] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
1/27/11 11:40:15 PM com.apple.UserEventAgent-LoginWindow[77] ALF error: cannot find useragent 1102
1/27/11 11:40:15 PM com.apple.UserEventAgent-LoginWindow[77] plugin.UserEventAgentFactory: called with typeID=FC86416D-6164-2070-726F-70735C216EC0
1/27/11 11:40:15 PM SoftwareUpdateCheck[98] Checking for updates
1/27/11 11:40:15 PM com.apple.launchd.peruser.501[84] (com.apple.Kerberos.renew.plist[111]) Exited with exit code: 1
1/27/11 11:40:17 PM storeagent[119] port created
1/27/11 11:40:21 PM com.apple.WindowServer[65] Thu Jan 27 23:40:21 Troy-Lindstroms-MacBook.local WindowServer[65] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
1/27/11 11:40:27 PM [0x0-0xa00a].com.skype.skype[116] Main starting with pid 116 parent pid 84
1/27/11 11:40:29 PM Skype[116] SkypeApplication::init called
1/27/11 11:41:02 PM SoftwareUpdateCheck[98] Downloading "iTunes"
1/27/11 11:42:35 PM SoftwareUpdateCheck[98] Auto-download of "iTunes" SUCCESSFUL.
1/27/11 11:42:35 PM SoftwareUpdateCheck[98] Launching app
1/27/11 11:43:20 PM com.apple.launchd.peruser.501[84] ([0x0-0x6006].SoftwareUpdateCheck[98]) Exited with exit code: 102
1/28/11 9:51:59 AM com.apple.RemoteUI[589] CoreAnimation: rendering error 501
1/28/11 9:52:15 AM com.apple.RemoteUI[589] HTTP2 Streaming Reads ON
1/28/11 11:31:15 AM com.apple.launchd.peruser.501[84] ([0x0-0x10010].com.apple.Safari[134]) Exited: Terminated
1/28/11 11:42:21 AM com.apple.launchd[1] (com.apple.suhelperd[104]) Exited with exit code: 2
1/28/11 3:49:50 PM com.apple.launchd.peruser.501[84] (com.apple.AirPortBaseStationAgent[113]) Exited: Killed
1/28/11 3:49:50 PM com.apple.launchd.peruser.501[84] ([0x0-0x80080].com.apple.iTunesHelper[764]) Exited: Killed
1/28/11 3:50:10 PM com.apple.launchd.peruser.501[84] (com.apple.Dock.agent[88]) Exit timeout elapsed (20 seconds). Killing
1/28/11 3:53:36 PM com.apple.launchd[1] * launchd[1] has started up. *
1/28/11 3:55:16 PM com.apple.launchd.peruser.501[90] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
1/28/11 3:55:16 PM com.apple.UserEventAgent-LoginWindow[82] ALF error: cannot find useragent 1102
1/28/11 3:55:16 PM com.apple.UserEventAgent-LoginWindow[82] plugin.UserEventAgentFactory: called with typeID=FC86416D-6164-2070-726F-70735C216EC0
1/28/11 3:55:25 PM com.apple.launchd.peruser.501[90] (com.apple.Kerberos.renew.plist[111]) Exited with exit code: 1
1/28/11 3:55:27 PM com.apple.WindowServer[72] Fri Jan 28 15:55:27 Troy-Lindstroms-MacBook.local WindowServer[72] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
1/28/11 3:55:40 PM [0x0-0x8008].com.skype.skype[115] Main starting with pid 115 parent pid 90
1/28/11 3:55:41 PM Skype[115] SkypeApplication::init called
1/28/11 11:40:16 PM SoftwareUpdateCheck[419] Checking for updates
1/28/11 11:40:16 PM storeagent[422] port created
1/28/11 11:40:59 PM com.apple.launchd[1] (com.apple.suhelperd[421]) Exited with exit code: 2
1/28/11 11:40:59 PM com.apple.launchd.peruser.501[90] ([0x0-0x56056].SoftwareUpdateCheck[419]) Exited with exit code: 102
1/29/11 3:02:24 AM quicklookd[551] [QL] 'Creating thumbnail' timed out for '<QLThumbnailRequest /Users/troylindstrom/Downloads/images-30.jpeg>' (Start date: 2011-01-29 03:02:04 -0800)
1/29/11 3:05:11 AM quicklookd[555] [QL] 'Creating thumbnail - cancelled' timed out for '<QLThumbnailRequest /Users/troylindstrom/Downloads/About Downloads.pdf>' (Start date: 2011-01-29 03:03:35 -0800)
1/29/11 3:05:52 AM quicklookd[560] [QL] 'Creating thumbnail' timed out for '<QLThumbnailRequest /Users/troylindstrom/Downloads/About Downloads.pdf>' (Start date: 2011-01-29 03:05:32 -0800)
1/29/11 3:06:44 AM quicklookd[563] [QL] 'Creating thumbnail' timed out for '<QLThumbnailRequest /Users/troylindstrom/Downloads/images-3.jpeg>' (Start date: 2011-01-29 03:06:22 -0800)
1/29/11 6:37:03 AM com.apple.launchd.peruser.501[90] ([0x0-0x86086].com.apple.Preview[708]) Exited: Killed
1/29/11 6:37:03 AM com.apple.launchd.peruser.501[90] ([0x0-0x8a08a].com.apple.systemevents[721]) Exited: Killed
1/29/11 6:37:03 AM com.apple.launchd.peruser.501[90] (com.apple.AirPortBaseStationAgent[113]) Exited: Killed
1/29/11 6:37:13 AM com.apple.launchd[1] * launchd[1] has started up. *
1/29/11 6:37:42 AM com.apple.UserEventAgent-LoginWindow[81] ALF error: cannot find useragent 1102
1/29/11 6:37:42 AM com.apple.UserEventAgent-LoginWindow[81] plugin.UserEventAgentFactory: called with typeID=FC86416D-6164-2070-726F-70735C216EC0
1/29/11 6:37:42 AM com.apple.launchd.peruser.501[89] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
1/29/11 6:37:50 AM com.apple.WindowServer[54] Sat Jan 29 06:37:50 Troy-Lindstroms-MacBook.local WindowServer[54] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
1/29/11 6:37:52 AM com.apple.launchd.peruser.501[89] (com.apple.Kerberos.renew.plist[109]) Exited with exit code: 1
1/29/11 6:38:03 AM [0x0-0x8008].com.skype.skype[113] Main starting with pid 113 parent pid 89
1/29/11 6:38:05 AM Skype[113] SkypeApplication::init called
1/29/11 12:14:57 PM [0x0-0x36036].com.apple.CharacterPaletteIM[330] objc[330]: Class ThinDividerSplitView is implemented in both /System/Library/Input Methods/CharacterPalette.app/Contents/MacOS/CharacterPalette and /System/Library/Input Methods/CharacterPalette.app/Contents/PlugIns/RomanView.CharPalettePlugin/Conte nts/MacOS/RomanView. One of the two will be used. Which one is undefined.
1/29/11 12:43:40 PM [0x0-0x39039].com.apple.CharacterPaletteIM[346] objc[346]: Class ThinDividerSplitView is implemented in both /System/Library/Input Methods/CharacterPalette.app/Contents/MacOS/CharacterPalette and /System/Library/Input Methods/CharacterPalette.app/Contents/PlugIns/RomanView.CharPalettePlugin/Conte nts/MacOS/RomanView. One of the two will be used. Which one is undefined.
1/29/11 6:52:46 PM com.apple.launchd.peruser.501[89] ([0x0-0xf00f].com.apple.Safari[131]) Exited: Terminated
1/29/11 6:52:59 PM com.apple.launchd.peruser.501[89] ([0x0-0x1e01e].com.apple.AddressBook[206]) Exited: Terminated
1/29/11 6:52:59 PM loginwindow[29] * -[NSCFArray objectAtIndex:]: index (1) beyond bounds (1)
1/29/11 6:52:59 PM com.apple.loginwindow[29] 2011-01-29 18:52:59.446 loginwindow[29:107] * -[NSCFArray objectAtIndex:]: index (1) beyond bounds (1)
1/29/11 6:53:14 PM com.apple.launchd.peruser.501[89] (com.apple.AirPortBaseStationAgent[111]) Exited: Killed
1/30/11 9:17:52 AM com.apple.launchd[1] * launchd[1] has started up. *
1/30/11 9:19:51 AM com.apple.fontd[66] FODBCheck: foRec->annexNumber != kInvalidAnnexNumber (0)
1/30/11 9:19:51 AM com.apple.WindowServer[68] Sun Jan 30 09:19:51 Troy-Lindstroms-MacBook.local WindowServer[68] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
1/30/11 9:19:54 AM com.apple.fontd[66] FODBCheck: foRec->annexNumber != kInvalidAnnexNumber (0)
1/30/11 9:20:00 AM com.apple.UserEventAgent-LoginWindow[78] ALF error: cannot find useragent 1102
1/30/11 9:20:00 AM com.apple.UserEventAgent-LoginWindow[78] plugin.UserEventAgentFactory: called with typeID=FC86416D-6164-2070-726F-70735C216EC0
1/30/11 9:20:00 AM com.apple.launchd.peruser.501[86] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
1/30/11 9:20:02 AM fontd[98] Database content version mismatch (stored(15) != expected(14))
1/30/11 9:20:04 AM SoftwareUpdateCheck[94] Checking for updates
1/30/11 9:20:05 AM storeagent[102] port created
1/30/11 9:20:08 AM com.apple.launchd.peruser.501[86] (com.apple.Kerberos.renew.plist[109]) Exited with exit code: 1
1/30/11 9:20:38 AM com.apple.launchd.peruser.501[86] (com.apple.AirPortBaseStationAgent[111]) Exited: Killed
1/30/11 9:20:39 AM com.apple.loginwindow[22] shutdown: / is busy updating; waiting for lock
1/30/11 9:20:44 AM com.apple.launchd[1] (com.apple.suhelperd[101]) Exited with exit code: 2
1/30/11 9:20:45 AM com.apple.launchd.peruser.501[86] ([0x0-0x6006].SoftwareUpdateCheck[94]) Exited with exit code: 102
1/30/11 9:20:49 AM com.apple.coreservicesd[44] ThrottleProcessIO: throttling disk i/o
1/30/11 9:20:55 AM com.apple.coreservicesd[44] ThrottleProcessIO: throttling disk i/o
1/30/11 9:21:16 AM com.apple.launchd[1] * launchd[1] has started up. *
1/30/11 9:22:04 AM com.apple.UserEventAgent-LoginWindow[81] ALF error: cannot find useragent 1102
1/30/11 9:22:04 AM com.apple.UserEventAgent-LoginWindow[81] plugin.UserEventAgentFactory: called with typeID=FC86416D-6164-2070-726F-70735C216EC0
1/30/11 9:22:04 AM com.apple.launchd.peruser.501[89] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
1/30/11 9:22:07 AM fontd[101] Database content version mismatch (stored(15) != expected(14))
1/30/11 9:22:07 AM fontd[101] Failed to open read-only database, regenerating DB
1/30/11 9:22:11 AM com.apple.fontd[101] FODBCheck: foRec->annexNumber != kInvalidAnnexNumber (0)
1/30/11 9:22:13 AM com.apple.launchd.peruser.501[89] (com.apple.Kerberos.renew.plist[111]) Exited with exit code: 1
1/30/11 9:22:19 AM com.apple.WindowServer[69] Sun Jan 30 09:22:19 Troy-Lindstroms-MacBook.local WindowServer[69] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
1/30/11 9:22:26 AM com.apple.fontd[101] FODBCheck: foRec->annexNumber != kInvalidAnnexNumber (0)
1/30/11 9:22:26 AM [0x0-0x9009].com.skype.skype[116] Main starting with pid 116 parent pid 89
1/30/11 9:22:28 AM Skype[116] SkypeApplication::init called
1/30/11 10:33:53 AM com.apple.launchd.peruser.501[89] (com.apple.AirPortBaseStationAgent[113]) Exited: Killed
1/30/11 10:34:02 AM com.apple.launchd[1] * launchd[1] has started up. *
1/30/11 10:34:26 AM com.apple.launchd.peruser.501[86] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
1/30/11 10:34:26 AM com.apple.UserEventAgent-LoginWindow[79] ALF error: cannot find useragent 1102
1/30/11 10:34:26 AM com.apple.UserEventAgent-LoginWindow[79] plugin.UserEventAgentFactory: called with typeID=FC86416D-6164-2070-726F-70735C216EC0
1/30/11 10:34:28 AM com.apple.launchd.peruser.501[86] (com.apple.Kerberos.renew.plist[107]) Exited with exit code: 1
1/30/11 10:34:32 AM [0x0-0x8008].com.skype.skype[112] Main starting with pid 112 parent pid 86
1/30/11 10:34:36 AM Skype[112] SkypeApplication::init called
1/30/11 3:37:45 PM com.apple.launchd[1] * launchd[1] has started up. *
1/30/11 3:50:19 PM com.apple.fontd[68] FODBCheck: foRec->annexNumber != kInvalidAnnexNumber (0)
1/30/11 3:50:19 PM com.apple.WindowServer[69] Sun Jan 30 15:50:19 Troy-Lindstroms-MacBook.local WindowServer[69] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
1/30/11 3:50:21 PM com.apple.fontd[68] FODBCheck: foRec->annexNumber != kInvalidAnnexNumber (0)
1/30/11 3:50:52 PM com.apple.coreservicesd[45] ThrottleProcessIO: throttling disk i/o
1/30/11 3:53:14 PM com.apple.UserEventAgent-LoginWindow[80] ALF error: cannot find useragent 1102
1/30/11 3:53:14 PM com.apple.UserEventAgent-LoginWindow[80] plugin.UserEventAgentFactory: called with typeID=FC86416D-6164-2070-726F-70735C216EC0
1/30/11 3:53:14 PM com.apple.launchd.peruser.501[90] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
1/30/11 3:53:15 PM fontd[101] Database content version mismatch (stored(15) != expected(14))
1/30/11 3:53:18 PM com.apple.coreservicesd[45] ThrottleProcessIO: throttling disk i/o
1/30/11 3:53:20 PM com.apple.launchd.peruser.501[90] (com.apple.Kerberos.renew.plist[109]) Exited with exit code: 1
1/30/11 4:00:53 PM com.apple.launchd.peruser.501[90] (com.apple.AirPortBaseStationAgent[111]) Exited: Killed
1/30/11 4:12:07 PM com.apple.launchd[1] * launchd[1] has started up. *
1/30/11 4:12:56 PM com.apple.UserEventAgent-LoginWindow[81] ALF error: cannot find useragent 1102
1/30/11 4:12:56 PM com.apple.UserEventAgent-LoginWindow[81] plugin.UserEventAgentFactory: called with typeID=FC86416D-6164-2070-726F-70735C216EC0
1/30/11 4:12:56 PM com.apple.launchd.peruser.501[89] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
1/30/11 4:12:59 PM fontd[101] Database content version mismatch (stored(15) != expected(14))
1/30/11 4:12:59 PM fontd[101] Failed to open read-only database, regenerating DB
1/30/11 4:13:06 PM com.apple.launchd.peruser.501[89] (com.apple.Kerberos.renew.plist[111]) Exited with exit code: 1
1/30/11 4:13:15 PM com.apple.fontd[101] FODBCheck: foRec->annexNumber != kInvalidAnnexNumber (0)
1/30/11 4:13:21 PM com.apple.fontd[101] FODBCheck: foRec->annexNumber != kInvalidAnnexNumber (0)
1/30/11 4:13:21 PM [0x0-0x9009].com.skype.skype[116] Main starting with pid 116 parent pid 89
1/30/11 4:13:23 PM Skype[116] SkypeApplication::init called
1/30/11 5:12:33 PM com.apple.WindowServer[69] Sun Jan 30 17:12:33 Troy-Lindstroms-MacBook.local WindowServer[69] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
1/30/11 5:12:34 PM com.apple.RemoteUI[169] CoreAnimation: rendering error 501
1/30/11 5:12:46 PM com.apple.launchd.peruser.501[89] ([0x0-0x9009].com.skype.skype[116]) Exited: Terminated
1/30/11 5:12:49 PM com.apple.RemoteUI[169] HTTP2 Streaming Reads ON
1/30/11 5:13:12 PM System Preferences[175] .scriptSuite warning for result type of command 'timedLoad' in suite 'SystemPreferences': the type NSNumber ('long') doesn't match the result Apple event code ('doub').
1/31/11 12:17:59 AM com.apple.launchd[1] (com.apple.aslmanager) Throttling respawn: Will start in 5 seconds
1/31/11 12:54:05 AM com.apple.launchd.peruser.501[89] ([0x0-0x18018].com.apple.Safari[180]) Exited: Terminated
1/31/11 1:31:00 AM com.apple.launchd.peruser.501[89] (com.apple.AirPortBaseStationAgent[113]) Exited: Killed
1/31/11 1:31:24 AM com.apple.launchd[1] * launchd[1] has started up. *
1/31/11 1:33:28 AM com.apple.fontd[66] FODBCheck: foRec->annexNumber != kInvalidAnnexNumber (0)
1/31/11 1:33:29 AM com.apple.WindowServer[67] Mon Jan 31 01:33:29 Troy-Lindstroms-MacBook.local WindowServer[67] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
1/31/11 1:33:31 AM com.apple.fontd[66] FODBCheck: foRec->annexNumber != kInvalidAnnexNumber (0)
1/31/11 1:33:48 AM com.apple.UserEventAgent-LoginWindow[76] ALF error: cannot find useragent 1102
1/31/11 1:33:48 AM com.apple.UserEventAgent-LoginWindow[76] plugin.UserEventAgentFactory: called with typeID=FC86416D-6164-2070-726F-70735C216EC0
1/31/11 1:33:48 AM com.apple.launchd.peruser.501[86] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
1/31/11 1:33:50 AM fontd[96] Database content version mismatch (stored(15) != expected(14))
1/31/11 1:33:54 AM com.apple.launchd.peruser.501[86] (com.apple.Kerberos.renew.plist[105]) Exited with exit code: 1
1/31/11 1:34:13 AM com.apple.coreservicesd[44] ThrottleProcessIO: throttling disk i/o
1/31/11 1:34:13 AM com.apple.coreservicesd[44] ThrottleProcessIO: throttling disk i/o
1/31/11 1:44:00 AM com.apple.launchd.peruser.501[86] (com.apple.AirPortBaseStationAgent[107]) Exited: Killed
1/31/11 1:44:10 AM com.apple.launchd[1] * launchd[1] has started up. *
1/31/11 1:44:43 AM com.apple.launchd.peruser.501[86] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
1/31/11 1:44:43 AM fontd[95] Database content version mismatch (stored(15) != expected(14))
1/31/11 1:44:43 AM fontd[95] Failed to open read-only database, regenerating DB
1/31/11 1:44:44 AM com.apple.UserEventAgent-LoginWindow[79] ALF error: cannot find useragent 1102
1/31/11 1:44:44 AM com.apple.UserEventAgent-LoginWindow[79] plugin.UserEventAgentFactory: called with typeID=FC86416D-6164-2070-726F-70735C216EC0
1/31/11 1:44:45 AM com.apple.launchd.peruser.501[86] (com.apple.Kerberos.renew.plist[108]) Exited with exit code: 1
1/31/11 1:44:45 AM com.apple.fontd[95] FODBCheck: foRec->annexNumber != kInvalidAnnexNumber (0)
1/31/11 1:44:57 AM com.apple.fontd[95] FODBCheck: foRec->annexNumber != kInvalidAnnexNumber (0)
1/31/11 1:44:58 AM [0x0-0x8008].com.skype.skype[112] Main starting with pid 112 parent pid 86
1/31/11 1:45:00 AM Skype[112] SkypeApplication::init called
1/31/11 2:00:28 AM com.apple.launchd[1] (com.apple.suhelperd[141]) Exited with exit code: 2
Can anyone see the issue or tell me what I need to do to fix this thing???

Which MacBook model? Did it come with OSX 10.6 or did you upgrade it?

Unrepairable "different" Permissions After Updating iTunes

Hello -
First, I need to confess that I am not an Apple computer guru. However, up until today, I've never experienced any major problems with either of my two Mac computers.
Ugh. . .
I updated both the iTunes and Front Row programs on my MacBook Pro today. I did what I usually do after performing any major update or upgrade, I repair the permissions via the Disk Utility program. This utility almost always repairs any of the changes that may have occurred during the updating/upgrading process. It did not work this time, unfortunately.
I am unable to repair the dozen or so differing permissions that the Disk Utility tells me exists. I click the "Repair Disk Permissions" and when it's finished it tells me, "Permissions repair complete". I, then, click "Verify Disk Permissions" and receive the same messages as before; that there are many differing permissions.
So. . . here are my questions:
1) Will this apparent problem of differing permissions effect the overall performance and stability of my computer in any way? (I use the MacBook Pro mainly as a slave computer for instrumental software plug-ins for sequencing projects.) (By the way. . . "So far, so good". I haven't noticed any problems, YET, when loading up my Kontakt 2 and Kontakt 2 Player instrumental software programs.)
2) Will this apparent problem leave my MacBook Pro vulnerable to future problems (like future program updates, computer viruses, etc)?
3) Is there any way to fix this apparent problem??
Thankfully, I did NOT upgrade the iTunes on the larger MacPro computer which houses main audio and video editing software programs. In fact, I very rarely use the iTunes program. The only reason I keep it on the MacBook Pro is because my wife owns an iPod device. But she keeps her iPod hooked up to her aging yet dependable Dell laptop computer. (I don't think she even updated her Windows version of iTunes yet! LOL!) Silly, silly me for updating a program I don't even use. Now, I humbly wish to fix this problem before it get worse. I use the MacBook Pro all the time for my music-sequencing projects (as a slave computer to my MacPro).
Thank you in advance. . .
Embarrassed. . . . and GRATEFUL for any solutions to this apparent problem. . .
Ted

Thank You!!
I read the entire link that you supplied. Very Informative!! It also relieved my anxiety quite a bit!
Again, thank you!
Ted

Workaround for Disk Permissions after 10.5.1

I don't know if this was posted but I saw on macfixit.com a workaround or even a fix for the additional disk permissions you see after the 10.5.1 update. If you do the update from Software Update you seem to get these extra permission errors. If you download the full 10.5.1 update and apply that, you don't get the permissions errors except for the ARDAgent error. The reapplying the full update also doesn't make it any faster.

Yes the software update located under the 'Apple menu' seems to be having more issues than the 110MB update located on the Apple web site. Maybe because it's just a 39MB patch where as the other one is a full update. They have issued a tech note saying that the ARDAgent error is correct but that it's nothing to worry about. After applying the 110MB (version) 10.5.1 update our Disc Utility and most other issues with 10.5 have gone away. The biggest issue for us right now is the constant nagging for passwords all the time, especially in Mail

10.5.6: Problems with disk permissions after Time Machine restore

HELP!
This is the second time this is happening to me-- I restored my 10.5.6 system fully from a Time Machine backup, and now the disk permissions, as far as I can tell, are completely screwed up.
I have not turned off my system since the restore, for fear that it won't start up again (as was the case the last time I did this). When I try to repair disk permissions in the Disk Utility app, I get the error message "The underlying task reported failure on exit."
Generally, the system does not have access to certain folders (most, if not all of them, actually).
For example, Safari can't use plugins.
I'm not asking why this is happening, I just want to know what I should do to avoid having to reinstall 10.5.5, update it to 10.5.6, and put all of my files back, because all my settings would be deleted if I chose that option.
I'm not going to turn off my computer until I fix this, because I know it will never startup--
again.
DUN DUN DUN...
So please help me, and thank you kindly,
SeanDaBomb

SeanDaBomb wrote:
I repaired permissions, updated prebindings, cleaned user caches and cleaned archived logs almost every single day before I restored my system. I was trying out this theme changer for Leopard that was unable to undo its (ugly) work. I think the problem might be that I restored the system from my 10.5.5 install disk (yes, in the Utilities menu, the Restore From Backup option).
Using a 10.5.5 install disc doesn't matter, as you didn't actually load anything from it, just used it's installer to do the restore from TM.
So you selected a previous backup, from before all the trouble started, right?
My backup drive's condition is alright, so I doubt that I restored corrupted files.
Everything now on your system came from your TM drive.
I'd suggest booting from your Leopard Install disk, and using it's copy of Disk Utility to do a +Repair Disk+ on your internal HD, then a +Repair Permissions.+

Can't repair disk permissions, System Updates wont install

Hi there,
I wondered, why any system update wont install on my MacBook Pro with Leopard 10.5.5. So I tried to repair disk permissions which causes an error that calls something like "there is an error in quitting the process" (sorry ... have only the german version, so this is nearly what it says).
Repairing the permissions from a Leopard DVD ends up the same way.
Repairing the harddisk works fine.
Updating the 10.5.5 Combo Update quits with an error that says "The Installation package couldn't install some of the files in "/". Contact the Manufacturer."
Any ideas what this could be ? Thought it startet a couple of days ago with the installation of a new Java Version, but I'm not sure if this causes any problems.
Thanks for any suggestions

ok,
I've found this in the logfiles:
Started verify/repair permissions on disk disk0s2 Macintosh HD
Error -9972: The underlying task reported failure on exit
Finished verify/repair permissions on disk disk0s2 Macintosh HD
Error detected while verifying/repairing permissions on disk0s2 Macintosh HD: The underlying task reported failure on exit (-9972)
Repairing the keychains worked fine but didn't solve the problem at all.

Why won't my macbook pro repair disk permissions after upgrading to Mountain Lion?

I upgraded my 2010 Macbook pro with 2.4gHz core 2 duo processor to Mountain Lion and ever since it has been giving me issues. One of my biggest concerns is that it will no longer repair disk permissions. The progress bar goes about half way and just sits there without finishing, and this is something i'm used to doing very regularly. Other than that it has been crashing fairly often and just acting strange where on Snow Leopard it never crashed or had any issues. Any suggestions?

Quit Safari. From the Finder click on Go > Go to Folder and type ~/Library/Preferences. Delete the com.apple.Safari.plist file. Logout/Login and restart Safari. Try to save a bookmark to the Bookmarks bar.
Message was edited by: hpr3

Puzzled - Boot Disk full after update to 10.5.7

Hi,
I have updated to 10.5.7. The following may or may not be connected!
My Boot Disk (69GB) previously had roughly 13GB of free space. However this morning the Boot Disk was reported as being full.
I don't believe there were any other significant downloads/installations in the past few days. Furthermore I have a copy of the Boot Disk which I made using SuperDuper last night. This copy shows up in Finder as 56GB.
I've also used WhatSize to examine the Boot Disk. It reports the drive almost full but at the same time indicates that there is only 53GB used on the disk. See [WhatSize screen grab|www.naomhfionnbarra.ie/WhatSize.png]
Any thoughts before I take radical action?
Frank

I have two suggestions.
10.5.7 has some flaws - no kidding. they seem to relate to permission issues.
Use cocktail 4.3.2 to repair permissions
And, their is a program called genius repairs drives and corrects problems. Both programs are available from MacOs Software.
However, I had a similar problem, I couldn't copy files to my external drive and went to macfixit. They suggested to safe boot your computer by holding down the shift key. Then use your disk utility program and correct the permissions. Then reinstall 10.5.7 combo and then repair your permissions a second time after the reinstallation of 10.5.7 from:http://support.apple.com/downloads/MacOS_X_10_5_7_ComboUpdate
Good luck

Library file permissions after update

I just updated to iTunes 8 and was having a problem with permissions for the library files. I was not listed as having access, and additionally is an account named "wheel" that I've never heard of that has access. The icon for this account shows the outline of two people.
I also noticed this issue with an album I recently transferred into iTunes that would not play after I deleted it and transferred it back in. I'm not really sure what's with this. Does anyone have any clues? I'm deleting this "wheel" account from access, but I'm hesitant to do that w/o knowing what it is. Please help. Thanks.

Also, there's another account for "system" that was set to "read & write", but none of my other files or folders have this on them.
Every other file/folder just has my account, "staff", and "everyone". Could someone also please direct me to more information about permissions and these various account? Thanks.

Leftover "disk" icons after updates, installs?

Probably this question is dumb and should't be here, but I get stumped sometimes-Many times, after installing software updates, or downloading new software, a "dive" looking icon remains on the desktop, and I can't get rid of it. After following all the instal instructions, this seems to be leftover. If I am successful in trashing it, do I lose the software also? Why doesn't the update or software just go to the applications folder, like some do?

344/2790
Hi Steve,
To continue Barbara's excellent reply,
and if ejecting a disk image seems to get rid of the whole application, it means that you didn't actually install it:
You were just running it from the disk image.
Just like you'd have run it from a CD.
"Why doesn't the update or software just go to the applications folder, like some do?"
They automatically go to the applications folder, because they are installed by an Installer.
The ones you have to drag yourself to the applications folder, are the ones that don't need an installer.
(That's how they also can run from the image, without being installed, creating only a preference file in your user's Library).
This looks confusing, but the good side of it is that applications in Mac OS are "self-containing": they don't spread multiple invisible files all over the place like in Windows.
Axl

Cannot see cluster disk resources after updating Windows base MP

Hello - we've recently updated the Windows base MP for SCOM 2007 R2. Once we did that we lost monitoring of our clustered disk resources. They're discovered but not monitored any more. Can someone please help!!! TIA
Mike Zamborini

Hi,
From the "Windows Server Operating System Management Pack Guide.docx" - page 42
Known Issue: Cluster Disks Managed by Third-Party Software are Not Monitored
Issue: If the Cluster disks are managed by third party software, and they change the resource type to anything other than “Physical Disk”, these disks will be discovered but we do not provide monitoring for these.
Workaround: There is no workaround currently available. In future, we will be removing discovery for these too.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Disk Permissions after update

Similar Messages

Maybe you are looking for