Disk Permissions changed after connecting mac via firewire on Target Disk Mode.

I have connected 2 macbook pros using firewire in target disk mode and the permissions on the destination macbook pro have changed. Now when I try to start the macbook pro, it stays on the grey screen and the apple sign changes to a prohibitory sign, therefore I cant log in.
Please help!
Thanks

I am unable to perform a safe boot, it simply wont happen.
I tried to start from mac osx install disk and that works so I am able to go disk utility, I can run 'verify disk' and 'repair disk' and it shows that everything is ok, however, I cant 'verify disk permissions' or 'repair disk permissions' as both are greyed out because 'the selected disk is not mounted'. I try mounting but that wont work either, I am told to 'disk can not be mounted, run first aid first and then retry'.
Furthermore, I try to perform 'archive and install' so I follow these instructions:
http://support.apple.com/kb/HT1710
But on number 7, intead of being able to choose volume to install to, there is nothing I can choose! There is no list. And of course I cant continue.
Any help is appreciated!

Similar Messages

  • Disk permissions changed after switching off FileVault

    Hi,
    I found my disk permissions changed after switching off FileVault, nearly everything belongs to "system" now.
    Can anyone PLEASE tell me what permissions are standard for
    -Desktop
    -Applications
    -System
    -Libary
    ore doesn't it matter anyway ????
    Thanks a lot...

    Assuming you're just talking about the Owner being System then:
    The owner of Desktop should be your user name.
    Applications and System should be System. Since these are not in your Home folder these permissions would have been corrected when you ran Repair Disk Permissions.
    The Library folder depends on which Library folder you are talking about. If it's the Library folder that's in the same folder as System and Applications, then the Owner should be System, as well. Again, if that is not in your Home folder, then the permissions repair would have corrected it.
    If, however, it's the Library that's in your Home folder, then it should have your username as the Owner.
    Filevault only affects things that are in your Home folder so turning it on/off doesn't affect permissions anywhere else.

  • Why do disk permissions change and should I worry?

    I noticed that my JavaAppletPlugin disk permission says that it should be something that it is not.  I can temporarily fix it by doing a repair disk permissions but sometime later the JavaAppletPlugin disk permissions change back to the settings prior to the repair.
    Why do these particular disk permissions change and should I worry about them?

    Thank you for your answer and I appreciate it.  However, I do have to admit that I am still bothered because, although it may be nothing to worry about, it still pops up as something my Mac thinks is in need of repair and I don't know why the permissions changed if they were supposed to be something specific before.  Call me crazy but it seems like it should not pop up if everything were ok.

  • Using a Mac mini as a target disk for a G4 Powerbook

    Hello,
    I saw a post that dealt with the above issue but i would like to get a bit more specific. I bought my Powerbook in 2005 and by now it's a bit dated. I use it to run Logic Pro, but also love games... So would it be possible to get a Mac mini Intel Duo 2Ghz, connect it to my Powerbook G4 and run games or other applications on the Mac mini but using the display and controls of my Powerbook? So in a few words, play on the Powerbook but run the game from the Mac mini. It sounds possible, but i am no computer genie! What do you think?
    Or should i just spend an extra £200 and a get a Macbook...?
    Thanks for your time,
    Dimitris
    Message was edited by: dimis
    Message was edited by: dimis

    When you run a computer in Target Disk Mode, the primary unit is what utilizes the processor, and the secondary unit in Target Disk Mode is only serving as the boot volume.
    What does this mean?
    Let's use two "equal" machines. At least, ones I've worked with. An iMac G3 400MHz and a 12-inch PowerBook G4 1.5GHz.
    If you connect your PowerBook in Target Disk Mode to the iMac G3, your iMac will not run faster and things that work with your PowerBook, say, Pages or iWork '05, won't run on your iMac. The primary unit is the iMac and all it is doing is accessing the PowerBook for the startup volume and any files. But it still runs at G3 speed and won't take advantage of the G4 speed since it is not the machine being used. All the iMac is doing is accessing the PowerBook as if it were a bare external drive. (Well, not bare in that sense).
    Vice versa, if you were to connect your iMac G3 in Target Disk Mode to your 12-inch PowerBook, things you saw that were slow at 400MHz, will fly at 1.5GHz and in G4 speeds, since the PowerBook is now your primary unit.
    To put it in your terms, what you want to do is really use an Intel Mac mini as your primary unit and connect your PowerBook to it in Target Disk Mode so that you will see speed increases there. What you outlined in your post will not be possible.
    If you connect an Intel Mac mini in Target Disk Mode to your PowerBook, the G4 processor will be the one being utilized, and in that case, you won't be able to run things like, say, Tiger Woods PGA Tour from EA (Electronic Arts) because while that runs and only runs on Intel-based Macs, with the Mac mini in Target Disk Mode, it will not use the Intel processor.
    Vice versa, if you were to connect your PowerBook in Target Disk Mode to your Intel Mac mini, things like OS9 apps in Classic mode wouldn't run on the Mac mini since it's accessing the files on the PowerBook, but the processor being utilized is the Intel one, and Classic is not compatible with Intel-based Macs.
    However, Logic Pro, as long as it was the Universal version, would fly on the Mac mini if using your PowerBook in Target Disk Mode.
    So, after all that, the best thing to do would be to buy a MacBook, or in an "apples to apples" comparison, the professional equivalent in the MacBook Pro.

  • I have the new macbook pro from late 2011. when i try plugging my cannon gl2 into the mac via firewire 800 it does not show up in iMovie as an option to import from. i even have gone into my settings on the camera and changed it to vcr.

    I have the new MacBook Pro from late 2011. "the one before the new ritina display" i have a cannon gl2 video camera which is mini dv. when i plug it into my mac via firwire 800 it does not show up in the iMovie. i have set the settings on the camera to vcr mode and changed it to av->dv out. when i click on the import from camera on imovie it doesnt even show my camera in it. it just gives me the option to import video from my facetime camera. the camera is turned on the wires are connected i know for fact that its a firewire and not a usb. i know what they each look like. i bought the firewire cable and it was marked down cause it was an opened and used item. would it be possible that it could be deffected and if that is not the reason what other options do i have?

    I would say that odds are high that you have a bad cable. Maybe that is why they returned it.
    I would suggest trying a different firewire cable.
    You can find Firewire cables inexpensively at monoprice.com. You need a 4 pin to 9 pin firewire cable.
    Here is a link.
    http://www.monoprice.com/products/subdepartment.asp?c_id=102&cp_id=10301
    Other things to check:
    Is your camera plugged in to wall power (not to batteries only). Must be hooked to an AC power source to import.

  • Migration Assistant not recognizing other Mac via FireWire

    I am trying to transfer files from my G4 Mirror Doors Power Mac to my new Intel iMac via the instructions that come up on the new iMac. I am running the latest version of 10.4 on the G4.
    I have the two machines connected via FireWire. I restarted the G4 holding the "T" key down and sure enough, the floating "FireWire" icon comes up but shortly after that, the new iMac says, "There are no versions of OS X on the older machine" which is obviously not true.
    I tried the Ethernet route and loaded the Install Disk from the iMac into the G4 as instructed but that disk did not recognize either of my 2 internal drives as valid for installation.
    Any suggestions?

    FWIW, I have had no problems using Migration Assistant or understanding its prompts, at least when using the version included in the recent Migration and DVD and CD Sharing Update. In this version or later, every option has both a title & descriptive info below it & there are no places I can see in which everything is called a document. You may want to check your MA version number & make sure it is version 1.2.3 or later, as described in About the Migration and DVD/CD Sharing Update. This may help avoid any confusion you have had.
    However, keep in mind that MA is designed to migrate files from one backup or startup disk at a time. It will transfer items from one home folder on a connected drive to the corresponding one on the new drive but these items must be enclosed in a home folder (in /Users/) on that drive. If you have elected to store these items on a non-startup drive lacking that hierarchy, you must import them using some other method & decide where to put them on the new drive. MA cannot make that decision for you.
    Moreover, if you tell MA to import only your "Documents" folder, it will not import such items as your Movies, Music, Pictures, or other home folders, so for example your ~/Pictures/iPhoto Library file will not be imported, nor will be your ~/Music/iTunes folder (which contains your iTunes database files, even if the iTunes Music folder containing all your music files is stored elsewhere).
    Without knowing exactly how you have 'piecemealed' other files & folders into your new drive, I do not know what to tell you to do to best complete the migration process. If you can supply more info about that, & about where exactly the original files & folders are stored on the older Mac, perhaps I or someone else can give you more useful info about doing that.

  • Kernel panic immediately after connecting Android via USB

    Hi!
    I am getting a kernel panic immediately after I connect my Android phone via MTP. It wasn't happening before (on pre-Yosemite version).
    It may be relevant to know that I installed Samsung Kies before, which installs it's kernel modules, but I removed both modules and software itself since then.
    OS X Yosemite 10.10.1 (14B25)
    MacBook Pro (Retina, 13-inch, Mid 2014)
    2,8 GHz Intel Core i5
    8 GB 1600 MHz DDR3
    Intel Iris 1536 МБ
    Anonymous UUID:  
    8665615D-E61C-C529-9014-C37C6BB9FEB7
    Mon Dec 29 21:37:49 2014
    *** Panic Report ***
    panic(cpu 0 caller 0xffffff800701e80a): Kernel trap at 0xffffff7f8904c728, type 14=page fault, registers:
    CR0: 0x000000008001003b, CR2: 0xffffff80ed657000, CR3: 0x0000000249d80038, CR4: 0x00000000001626e0
    RAX: 0x0000000000003ff8, RBX: 0x0000000010533000, RCX: 0x000000000000e078, RDX: 0xffffff80d90f6f89
    RSP: 0xffffff8110f83910, RBP: 0xffffff8110f83940, RSI: 0xffffff8110f83840, RDI: 0x0000000000000000
    R8:  0xffffff7f8905d71d, R9:  0x0000000000000008, R10: 0xffffff8007555a60, R11: 0x0000000000000000
    R12: 0xffffff801acff000, R13: 0x0000000000000009, R14: 0xffffff80ed647020, R15: 0x0000000000003fef
    RFL: 0x0000000000010293, RIP: 0xffffff7f8904c728, CS:  0x0000000000000008, SS:  0x0000000000000010
    Fault CR2: 0xffffff80ed657000, Error code: 0x0000000000000000, Fault CPU: 0x0
    Backtrace (CPU 0), Frame : Return Address
    0xffffff8110f835c0 : 0xffffff8006f3a811
    0xffffff8110f83640 : 0xffffff800701e80a
    0xffffff8110f83800 : 0xffffff800703a443
    0xffffff8110f83820 : 0xffffff7f8904c728
    0xffffff8110f83940 : 0xffffff7f8904a88e
    0xffffff8110f83980 : 0xffffff7f88fa186f
    0xffffff8110f839b0 : 0xffffff7f88fa91c1
    0xffffff8110f839d0 : 0xffffff7f88fa915d
    0xffffff8110f83a00 : 0xffffff7f88fbd999
    0xffffff8110f83a60 : 0xffffff7f88fb8739
    0xffffff8110f83ab0 : 0xffffff7f88fc250a
    0xffffff8110f83b30 : 0xffffff8007501156
    0xffffff8110f83b60 : 0xffffff800750283b
    0xffffff8110f83bc0 : 0xffffff8007500003
    0xffffff8110f83d00 : 0xffffff8006fea517
    0xffffff8110f83e10 : 0xffffff8006f3e91c
    0xffffff8110f83e40 : 0xffffff8006f235a3
    0xffffff8110f83e90 : 0xffffff8006f33e8d
    0xffffff8110f83f10 : 0xffffff800700a142
    0xffffff8110f83fb0 : 0xffffff800703ac66
    Kernel Extensions in backtrace:
    com.apple.iokit.IOAcceleratorFamily2(156.4)[20DDCE61-E3EC-3CC1-8B79-170CEF2B603A ]@0xffffff7f88f9f000->0xffffff7f8900bfff
    dependency: com.apple.iokit.IOPCIFamily(2.9)[766FC23F-452C-3B74-951C-598BB17BCF06]@0xffffff 7f87724000
    dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[6D99A3BE-D531-3780-880B-13F2FC894A4A]@0 xffffff7f880da000
    com.apple.driver.AppleIntelHD5000Graphics(10.0)[C7C58F5A-B67C-3222-A925-15744468 8E57]@0xffffff7f8901a000->0xffffff7f89078fff
    dependency: com.apple.iokit.IOSurface(97)[B4E2654D-4087-3875-9D59-E899A0A04F0E]@0xffffff7f8 7fe6000
    dependency: com.apple.iokit.IOPCIFamily(2.9)[766FC23F-452C-3B74-951C-598BB17BCF06]@0xffffff 7f87724000
    dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[6D99A3BE-D531-3780-880B-13F2FC894A4A]@0 xffffff7f880da000
    dependency: com.apple.iokit.IOAcceleratorFamily2(156.4)[20DDCE61-E3EC-3CC1-8B79-170CEF2B603 A]@0xffffff7f88f9f000
    BSD process name corresponding to current thread: WindowServer
    Mac OS version:
    14B25
    Kernel version:
    Darwin Kernel Version 14.0.0: Fri Sep 19 00:26:44 PDT 2014; root:xnu-2782.1.97~2/RELEASE_X86_64
    Kernel UUID: 89E10306-BC78-3A3B-955C-7C4922577E61
    Kernel slide:     0x0000000006c00000
    Kernel text base: 0xffffff8006e00000
    __HIB  text base: 0xffffff8006d00000
    System model name: MacBookPro11,1 (Mac-189A3D4F975D5FFC)
    System uptime in nanoseconds: 370997774733658
    last loaded kext at 370920828472959: com.apple.driver.AppleUSBCDC   4.2.2b5 (addr 0xffffff7f8962b000, size 20480)
    last unloaded kext at 370983258406476: com.apple.driver.AppleUSBCDC 4.2.2b5 (addr 0xffffff7f8962b000, size 16384)
    loaded kexts:
    org.pqrs.driver.Karabiner   10.5.0
    org.virtualbox.kext.VBoxNetAdp  4.3.14
    org.virtualbox.kext.VBoxNetFlt  4.3.14
    org.virtualbox.kext.VBoxUSB 4.3.14
    org.virtualbox.kext.VBoxDrv 4.3.14
    com.paceap.kext.pacesupport.snowleopard 5.9
    com.apple.filesystems.smbfs 3.0.0
    com.apple.filesystems.autofs    3.0
    com.apple.iokit.IOBluetoothSerialManager    4.3.1f2
    com.apple.driver.AudioAUUC  1.70
    com.apple.driver.X86PlatformShim    1.0.0
    com.apple.driver.AGPM   100.14.37
    com.apple.driver.ApplePlatformEnabler   2.1.0d1
    com.apple.driver.AppleHDA   267.0
    com.apple.driver.AppleUpstreamUserClient    3.6.1
    com.apple.driver.AppleOSXWatchdog   1
    com.apple.driver.AppleThunderboltIP 2.0.2
    com.apple.iokit.IOUserEthernet  1.0.1
    com.apple.driver.AppleBacklight 170.4.12
    com.apple.driver.AppleSMCLMU    2.0.4d1
    com.apple.driver.AppleIntelHD5000Graphics   10.0.0
    com.apple.driver.AppleMCCSControl   1.2.10
    com.apple.Dont_Steal_Mac_OS_X   7.0.0
    com.apple.driver.AppleHWAccess  1
    com.apple.driver.AppleHV    1
    com.apple.driver.AppleCameraInterface   5.23.0
    com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.3.1f2
    com.apple.driver.AppleLPC   1.7.3
    com.apple.driver.AppleIntelFramebufferAzul  10.0.0
    com.apple.driver.AppleUSBTCButtons  240.2
    com.apple.driver.AppleUSBCardReader 3.5.0
    com.apple.driver.AppleUSBTCKeyboard 240.2
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
    com.apple.BootCache 35
    com.apple.driver.AppleUSBHub    705.4.1
    com.apple.driver.XsanFilter 404
    com.apple.iokit.IOAHCIBlockStorage  2.6.5
    com.apple.driver.AppleAHCIPort  3.0.7
    com.apple.driver.AirPort.Brcm4360   901.19.10
    com.apple.driver.AppleUSBXHCI   705.4.14
    com.apple.driver.AppleSmartBatteryManager   161.0.0
    com.apple.driver.AppleRTC   2.0
    com.apple.driver.AppleACPIButtons   3.1
    com.apple.driver.AppleHPET  1.8
    com.apple.driver.AppleSMBIOS    2.1
    com.apple.driver.AppleACPIEC    3.1
    com.apple.driver.AppleAPIC  1.7
    com.apple.nke.applicationfirewall   161
    com.apple.security.quarantine   3
    com.apple.security.TMSafetyNet  8
    com.apple.driver.AppleBluetoothHIDKeyboard  175.5
    com.apple.driver.IOBluetoothHIDDriver   4.3.1f2
    com.apple.driver.AppleHIDKeyboard   175.5
    com.apple.kext.triggers 1.0
    com.apple.driver.DspFuncLib 267.0
    com.apple.kext.OSvKernDSPLib    1.15
    com.apple.iokit.IOAudioFamily   200.6
    com.apple.vecLib.kext   1.2.0
    com.apple.driver.AppleBacklightExpert   1.1.0
    com.apple.driver.AppleHDAController 267.0
    com.apple.iokit.IOHDAFamily 267.0
    com.apple.iokit.IOSurface   97
    com.apple.driver.X86PlatformPlugin  1.0.0
    com.apple.driver.AppleSMBusController   1.0.13d1
    com.apple.driver.AppleSMC   3.1.9
    com.apple.iokit.IOBluetoothHostControllerUSBTransport   4.3.1f2
    com.apple.iokit.IOBluetoothFamily   4.3.1f2
    com.apple.iokit.IOUSBUserClient 705.4.0
    com.apple.driver.IOPlatformPluginFamily 5.8.0d49
    com.apple.iokit.IOSerialFamily  11
    com.apple.iokit.IONDRVSupport   2.4.1
    com.apple.AppleGraphicsDeviceControl    3.7.21
    com.apple.iokit.IOAcceleratorFamily2    156.4
    com.apple.iokit.IOGraphicsFamily    2.4.1
    com.apple.iokit.IOSCSIBlockCommandsDevice   3.7.0
    com.apple.iokit.IOUSBMassStorageClass   3.7.0
    com.apple.iokit.IOSCSIArchitectureModelFamily   3.7.0
    com.apple.driver.AppleUSBMultitouch 245.2
    com.apple.iokit.IOUSBHIDDriver  705.4.0
    com.apple.driver.AppleUSBMergeNub   705.4.0
    com.apple.driver.AppleUSBComposite  705.4.9
    com.apple.driver.CoreStorage    471
    com.apple.driver.AppleThunderboltDPInAdapter    4.0.6
    com.apple.driver.AppleThunderboltDPAdapterFamily    4.0.6
    com.apple.driver.AppleThunderboltPCIDownAdapter 2.0.2
    com.apple.iokit.IOAHCIFamily    2.7.0
    com.apple.driver.AppleThunderboltNHI    3.1.7
    com.apple.iokit.IOThunderboltFamily 4.2.1
    com.apple.iokit.IO80211Family   700.52
    com.apple.driver.mDNSOffloadUserClient  1.0.1b8
    com.apple.iokit.IONetworkingFamily  3.2
    com.apple.iokit.IOUSBFamily 705.4.14
    com.apple.driver.AppleEFINVRAM  2.0
    com.apple.driver.AppleEFIRuntime    2.0
    com.apple.iokit.IOHIDFamily 2.0.0
    com.apple.iokit.IOSMBusFamily   1.1
    com.apple.security.sandbox  300.0
    com.apple.kext.AppleMatch   1.0.0d1
    com.apple.driver.AppleKeyStore  2
    com.apple.driver.AppleMobileFileIntegrity   1.0.5
    com.apple.driver.AppleCredentialManager 1.0
    com.apple.driver.DiskImages 389.1
    com.apple.iokit.IOStorageFamily 2.0
    com.apple.iokit.IOReportFamily  31
    com.apple.driver.AppleFDEKeyStore   28.30
    com.apple.driver.AppleACPIPlatform  3.1
    com.apple.iokit.IOPCIFamily 2.9
    com.apple.iokit.IOACPIFamily    1.4
    com.apple.kec.Libm  1
    com.apple.kec.pthread   1
    com.apple.kec.corecrypto    1.0
    System Profile:
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x112), Broadcom BCM43xx 1.0 (7.15.124.12.10)
    Bluetooth: Version 4.3.1f2 15015, 3 services, 27 devices, 1 incoming serial ports
    Thunderbolt Bus: MacBook Pro, Apple Inc., 17.2
    Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1600 MHz, 0x02FE, -
    Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1600 MHz, 0x02FE, -
    USB Device: Internal Memory Card Reader
    USB Device: USB2.0 Hub
    USB Device: Ableton Push
    USB Device: USB-PS/2 Optical Mouse
    USB Device: AudioBox USB
    USB Device: BRCM20702 Hub
    USB Device: Bluetooth USB Host Controller
    USB Device: Apple Internal Keyboard / Trackpad
    Serial ATA Device: APPLE SSD SM0512F, 500.28 GB
    Model: MacBookPro11,1, BootROM MBP111.0138.B11, 2 processors, Intel Core i5, 2.8 GHz, 8 GB, SMC 2.16f68
    Network Service: Wi-Fi, AirPort, en0
    Graphics: Intel Iris, Intel Iris, Built-In

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Time machine disk permissions changed to read only

    Somehow, my Time Machine disk permissions have now changed tand my backups are failing;
    The permissions are:
    Me - read/write, Staff  - read/write, Everyone - read only. I clicked on the lock and entered my system password, but I cannot change anything.
    Then I ran Disk Utilities to repair and verify. Still nothing. I rebooted, logged out, logged back in, etc.
    There is plenty of space left on the 2 GB drive. It is a Seagate GoFlex drive.This seems to be a new problems that has not surfaced before. My backups always ran flawlessly.
    What to do?

    10/22/13 7:44:57.820 AM com.apple.backupd[49208]: Backup failed with error: The target volume is read-only.
    10/22/13 7:44:57.851 AM coreservicesd[66]: Application App:"UserNotificationCenter" [ 0x0/0xdd9dd9]  @ 0x0x7fb372e4b9c0 tried to be brought forward, but isn't in fPermittedFrontASNs ( ( ASN:0x0-0xdc8dc8:, ASN:0x0-0xa50a5:) ), so denying.
    10/22/13 7:44:57.851 AM WindowServer[1075]: [cps/setfront] Failed setting the front application to UserNotificationCenter, psn 0x0-0xdd9dd9, securitySessionID=0x186af, err=-13066
    10/22/13 7:55:27.048 AM CalendarAgent[25590]: [com.apple.calendar.store.log.caldav.queue] [Account refresh failed with error: Error Domain=CoreDAVHTTPStatusErrorDomain Code=401 "The operation couldn’t be completed. (CoreDAVHTTPStatusErrorDomain error 401.)" UserInfo=0x7ffba30190c0 {AccountName=Gmail, CalDAVErrFromRefresh=YES, CoreDAVHTTPHeaders=<CFBasicHash 0x7ffba247e7c0 [0x7fff7fa61110]>{type = immutable dict, count = 11,
    entries =>
        0 : Case Insensitive Key: X-Content-Type-Options = <CFString 0x7ffba24c02e0 [0x7fff7fa61110]>{contents = "nosniff"}
        1 : Case Insensitive Key: Content-Type = <CFString 0x7ffba2469b10 [0x7fff7fa61110]>{contents = "application/vnd.google.gdata.error+xml; charset=UTF-8"}
        2 : Case Insensitive Key: Server = <CFString 0x7ffba24e5590 [0x7fff7fa61110]>{contents = "GSE"}
        3 : Case Insensitive Key: Transfer-Encoding = <CFString 0x7fff7f24e928 [0x7fff7fa61110]>{contents = "Identity"}
        6 : Case Insensitive Key: Date = <CFString 0x7ffba2483320 [0x7fff7fa61110]>{contents = "Tue, 22 Oct 2013 11:55:26 GMT"}
        7 : Case Insensitive Key: X-Frame-Options = <CFString 0x7ffba249b8c0 [0x7fff7fa61110]>{contents = "SAMEORIGIN"}
        8 : Case Insensitive Key: X-XSS-Protection = <CFString 0x7ffba24f24d0 [0x7fff7fa61110]>{contents = "1; mode=block"}
        9 : Case Insensitive Key: Www-Authenticate = <CFString 0x7ffba24b3d40 [0x7fff7fa61110]>{contents = "GoogleLogin realm="https://www.google.com/accounts/ClientLogin", service="cl""}
        10 : Case Insensitive Key: Alternate-Protocol = <CFString 0x7ffba24e68f0 [0x7fff7fa61110]>{contents = "443:quic"}
        11 : Case Insensitive Key: Cache-Control = <CFString 0x7ffba24e0ee0 [0x7fff7fa61110]>{contents = "private, max-age=0"}
        12 : Case Insensitive Key: Expires = <CFString 0x7ffba24c1290 [0x7fff7fa61110]>{contents = "Tue, 22 Oct 2013 11:55:26 GMT"}
    10/22/13 8:01:07.101 AM WindowServer[1075]: handle_will_sleep_auth_and_shield_windows: no lock state data
    10/22/13 8:01:07.102 AM loginwindow[1074]: ERROR | -[LWScreenLock(Private) screenIsLockedTimeExpired:] | No lock state found, use built in check
    10/22/13 8:01:07.103 AM WindowServer[1075]: Created shield window 0x809 for display 0x003f003d
    10/22/13 8:01:07.103 AM WindowServer[1075]: handle_will_sleep_auth_and_shield_windows: no lock state data
    10/22/13 8:01:07.103 AM WindowServer[1075]: Created shield window 0x80a for display 0x003f003e
    10/22/13 8:01:07.103 AM WindowServer[1075]: handle_will_sleep_auth_and_shield_windows: no lock state data
    10/22/13 8:01:07.108 AM WindowServer[1075]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x04241110 device: 0x103b5d110  isBackBuffered: 1 numComp: 3 numDisp: 3
    10/22/13 8:01:07.232 AM loginwindow[1074]: resume called when there was already a timer
    10/22/13 8:01:29.746 AM coreaudiod[202]: Disabled automatic stack shots because audio IO is active
    10/22/13 8:01:30.373 AM coreaudiod[202]: Enabled automatic stack shots because audio IO is inactive
    10/22/13 8:01:33.595 AM com.apple.iCloudHelper[52460]: AOSKit ERROR: Setup request failed, [email protected], url=https://setup.icloud.com/setup/get_account_settings, requestHeaders=
        "Accept-Language" = "en-us";
        Authorization = "Basic ...";
        "X-APNS-Token" = f399cac3645458297dd7be50afbcef111e82ed4220706386f776a845c51135c9;
        "X-Aos-Accept-Tos" = false;
        "X-Mme-Client-Info" = "<MacPro5,1> <Mac OS X;10.8.5;12F45> <com.apple.AOSKit/152.4 (com.apple.systempreferences/12.0)>";
        "X-Mme-Country" = US;
        "X-Mme-Timezone" = EDT;
    error=Error Domain=AOSErrorDomain Code=5002 "The operation couldn’t be completed. (AOSErrorDomain error 5002.)" UserInfo=0x7fcb08435310 {HttpStatusCode=401, DialogInfo={
        AlternateButtonLabel = "";
        AlternateButtonLink = "";
        Body = UNAUTHORIZED;
        DefaultButtonLabel = "mme.setupservice.SetupServiceJS.OK";
        DefaultButtonLink = "";
        DialogType = PasswordDialog;
        ErrorID = UNAUTHORIZED;
        Header = "";
        HelpLink = "";
        description = "These account credentials are unauthorized.";
        localizedError = UNAUTHORIZED;
        protocolVersion = 2;
    }}, httpStatusCode=401, responseBody=
    <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
        <dict>
            <key>protocolVersion</key>
            <string>2</string>
            <key>DefaultButtonLabel</key>
            <string>mme.setupservice.SetupServiceJS.OK</string>
            <key>Body</key>
            <string>UNAUTHORIZED</string>
            <key>ErrorID</key>
            <string>UNAUTHORIZED</string>
            <key>DialogType</key>
            <string>CustomDialog</string>
            <key>AlternateButtonLink</key>
            <string></string>
            <key>AlternateButtonLabel</key>
            <string></string>
            <key>localizedError</key>
            <string>UNAUTHORIZED</string>
            <key>DefaultButtonLink</key>
            <string></string>
            <key>Header</key>
            <string></string>
            <key>HelpLink</key>
            <string></string>
            <key>description</key>
            <string>These account credentials are unauthorized.</string>
        </dict>
    </plist>
    10/22/13 8:01:35.293 AM System Preferences[52480]: Unknown serviceID: com.apple.Dataclass.SharedStreams
    10/22/13 8:01:35.423 AM System Preferences[52480]: Unknown serviceID: com.apple.Dataclass.SharedStreams
    10/22/13 8:01:35.423 AM System Preferences[52480]: Unknown serviceID: com.apple.Dataclass.SharedStreams
    10/22/13 8:01:35.900 AM com.apple.iCloudHelper[52460]: AOSKit ERROR: Quota usage request failed, [email protected], url=https://p20-quota.icloud.com:443/quotaservice/external/osx/1170343864/getQuotaIn fo, requestHeaders=
        "Accept-Language" = "en-us";
        Authorization = "Basic ...";
        "X-Mme-Client-Info" = "<MacPro5,1> <Mac OS X;10.8.5;12F45> <com.apple.AOSKit/152.4 (com.apple.systempreferences/12.0)>";
        "X-Mme-Country" = US;
        "X-Mme-Timezone" = EDT;
    error=Error Domain=AOSErrorDomain Code=1000 "The operation couldn’t be completed. (AOSErrorDomain error 1000.)" UserInfo=0x7fcb0984dc00 {HttpStatusCode=401, DialogInfo={
        DialogType = Unknown;
    }}, httpStatusCode=401
    10/22/13 8:01:36.357 AM System Preferences[52480]: Unknown serviceID: com.apple.Dataclass.SharedStreams
    10/22/13 8:01:36.358 AM System Preferences[52480]: Unknown serviceID: com.apple.Dataclass.SharedStreams
    10/22/13 8:01:36.502 AM System Preferences[52480]: Unknown serviceID: com.apple.Dataclass.SharedStreams
    10/22/13 8:01:36.503 AM System Preferences[52480]: Unknown serviceID: com.apple.Dataclass.SharedStreams
    10/22/13 8:01:36.535 AM System Preferences[52480]: handleOpenParameter called activateIgnoringOtherApps
    10/22/13 8:01:36.583 AM System Preferences[52480]: Unknown serviceID: com.apple.Dataclass.SharedStreams
    10/22/13 8:01:36.941 AM com.apple.time[1108]: Interval maximum value is 946100000 seconds (specified value: 9223372036854775807).
    10/22/13 8:01:37.161 AM aosnotifyd[52497]: bootstrap_look_up failed (44e)
    10/22/13 8:01:38.098 AM fseventsd[48]: Logging disabled completely for device:1: /Volumes/Recovery HD
    10/22/13 8:01:38.153 AM fseventsd[48]: disk logger: failed to open output file /Volumes/JRL1/.fseventsd/00000000043da126 (No such file or directory). mount point /Volumes/JRL1/.fseventsd
    10/22/13 8:01:38.241 AM fseventsd[48]: disk logger: failed to open output file /Volumes/JRL1/.fseventsd/00000000043da126 (No such file or directory). mount point /Volumes/JRL1/.fseventsd
    10/22/13 8:01:38.771 AM locationd[52500]: NOTICE,Location icon should now be in state 0
    10/22/13 8:01:39.397 AM System Preferences[52480]: INFO: FMM: containsRecoveryPartition: YES, version: 12E55
    10/22/13 8:01:39.438 AM System Preferences[52480]: INFO: FMM: containsRecoveryPartition: YES, version: 12E55
    10/22/13 8:01:39.672 AM System Preferences[52480]: INFO: FMM: recoveryPartitionNeedsUpdate: NO
    10/22/13 8:01:39.672 AM System Preferences[52480]: INFO: FMM: containsRecoveryPartition: YES, version: 12E55
    10/22/13 8:01:39.672 AM System Preferences[52480]: INFO: FMM: recoveryPartitionNeedsUpdate: NO
    10/22/13 8:01:39.673 AM System Preferences[52480]: INFO: FMM: can enable: YES
    10/22/13 8:01:39.678 AM System Preferences[52480]: Unknown serviceID: com.apple.Dataclass.SharedStreams
    10/22/13 8:01:39.758 AM System Preferences[52480]: INFO: FMM: containsRecoveryPartition: YES, version: 12E55
    10/22/13 8:01:39.758 AM System Preferences[52480]: INFO: FMM: recoveryPartitionNeedsUpdate: NO
    10/22/13 8:01:39.758 AM System Preferences[52480]: INFO: FMM: containsRecoveryPartition: YES, version: 12E55
    10/22/13 8:01:39.759 AM System Preferences[52480]: INFO: FMM: recoveryPartitionNeedsUpdate: NO
    10/22/13 8:01:39.759 AM System Preferences[52480]: INFO: FMM: can enable: YES
    10/22/13 8:01:39.759 AM System Preferences[52480]: INFO: FMM: containsRecoveryPartition: YES, version: 12E55
    10/22/13 8:01:39.759 AM System Preferences[52480]: INFO: FMM: recoveryPartitionNeedsUpdate: NO
    10/22/13 8:01:39.760 AM System Preferences[52480]: INFO: FMM: containsRecoveryPartition: YES, version: 12E55
    10/22/13 8:01:39.760 AM System Preferences[52480]: INFO: FMM: recoveryPartitionNeedsUpdate: NO
    10/22/13 8:01:39.760 AM System Preferences[52480]: INFO: FMM: can enable: YES
    10/22/13 8:01:40.022 AM System Preferences[52480]: INFO: FMM: containsRecoveryPartition: YES, version: 12E55
    10/22/13 8:01:40.022 AM System Preferences[52480]: INFO: FMM: recoveryPartitionNeedsUpdate: NO
    10/22/13 8:01:40.023 AM System Preferences[52480]: INFO: FMM: containsRecoveryPartition: YES, version: 12E55
    10/22/13 8:01:40.023 AM System Preferences[52480]: INFO: FMM: recoveryPartitionNeedsUpdate: NO
    10/22/13 8:01:40.023 AM System Preferences[52480]: INFO: FMM: can enable: YES
    10/22/13 8:01:40.151 AM System Preferences[52480]: Unknown serviceID: com.apple.Dataclass.SharedStreams
    10/22/13 8:01:40.340 AM com.apple.iCloudHelper[52460]: AOSKit ERROR: Quota usage request failed, [email protected], url=https://p20-quota.icloud.com:443/quotaservice/external/osx/1170343864/getQuotaIn fo, requestHeaders=
        "Accept-Language" = "en-us";
        Authorization = "Basic ...";
        "X-Mme-Client-Info" = "<MacPro5,1> <Mac OS X;10.8.5;12F45> <com.apple.AOSKit/152.4 (com.apple.systempreferences/12.0)>";
        "X-Mme-Country" = US;
        "X-Mme-Timezone" = EDT;
    error=Error Domain=AOSErrorDomain Code=1000 "The operation couldn’t be completed. (AOSErrorDomain error 1000.)" UserInfo=0x7fcb08412810 {HttpStatusCode=401, DialogInfo={
        DialogType = Unknown;
    }}, httpStatusCode=401
    10/22/13 8:01:47.781 AM System Preferences[52480]: Unknown serviceID: com.apple.Dataclass.SharedStreams
    10/22/13 8:01:53.583 AM App Store[52489]: No alternate URLs found for packageId com.apple.pkg.MakeQueuesScript
    10/22/13 8:04:35.496 AM Mail[52536]: Using V2 Layout
    10/22/13 8:04:35.675 AM librariand[52538]: MMe quota status changed: under quota
    10/22/13 8:04:39.533 AM com.apple.SecurityServer[15]: Session 100508 created
    10/22/13 8:04:42.421 AM com.apple.iCloudHelper[52460]: AOSKit ERROR: Setup request failed, [email protected], url=https://setup.icloud.com/setup/get_account_settings, requestHeaders=
        "Accept-Language" = "en-us";
        Authorization = "Basic ...";
        "X-APNS-Token" = f399cac3645458297dd7be50afbcef111e82ed4220706386f776a845c51135c9;
        "X-Aos-Accept-Tos" = false;
        "X-Mme-Client-Info" = "<MacPro5,1> <Mac OS X;10.8.5;12F45> <com.apple.AOSKit/152.4 (com.apple.syncdefaultsd/0.0)>";
        "X-Mme-Country" = US;
        "X-Mme-Timezone" = EDT;
    error=Error Domain=AOSErrorDomain Code=5002 "The operation couldn’t be completed. (AOSErrorDomain error 5002.)" UserInfo=0x7fcb09b00080 {HttpStatusCode=401, DialogInfo={
        AlternateButtonLabel = "";
        AlternateButtonLink = "";
        Body = UNAUTHORIZED;
        DefaultButtonLabel = "mme.setupservice.SetupServiceJS.OK";
        DefaultButtonLink = "";
        DialogType = PasswordDialog;
        ErrorID = UNAUTHORIZED;
        Header = "";
        HelpLink = "";
        description = "These account credentials are unauthorized.";
        localizedError = UNAUTHORIZED;
        protocolVersion = 2;
    }}, httpStatusCode=401, responseBody=
    <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
        <dict>
            <key>protocolVersion</key>
            <string>2</string>
            <key>DefaultButtonLabel</key>
            <string>mme.setupservice.SetupServiceJS.OK</string>
            <key>Body</key>
            <string>UNAUTHORIZED</string>
            <key>ErrorID</key>
            <string>UNAUTHORIZED</string>
            <key>DialogType</key>
            <string>CustomDialog</string>
            <key>AlternateButtonLink</key>
            <string></string>
            <key>AlternateButtonLabel</key>
            <string></string>
            <key>localizedError</key>
            <string>UNAUTHORIZED</string>
            <key>DefaultButtonLink</key>
            <string></string>
            <key>Header</key>
            <string></string>
            <key>HelpLink</key>
            <string></string>
            <key>description</key>
            <string>These account credentials are unauthorized.</string>
        </dict>
    </plist>
    10/22/13 8:04:42.834 AM WindowServer[1075]: CGXSetWindowBackgroundBlurRadius: Invalid window 0xffffffff
    10/22/13 8:04:45.323 AM System Preferences[52480]: Unknown serviceID: com.apple.Dataclass.SharedStreams
    10/22/13 8:04:45.342 AM xpcd[25595]: AOSAlertManager[52545]: registration request failed: (0x12, 0xd) process failed sandbox check
    10/22/13 8:04:45.369 AM System Preferences[52480]: INFO: FMM: containsRecoveryPartition: YES, version: 12E55
    10/22/13 8:04:45.369 AM System Preferences[52480]: INFO: FMM: recoveryPartitionNeedsUpdate: NO
    10/22/13 8:04:45.370 AM System Preferences[52480]: INFO: FMM: containsRecoveryPartition: YES, version: 12E55
    10/22/13 8:04:45.370 AM System Preferences[52480]: INFO: FMM: recoveryPartitionNeedsUpdate: NO
    10/22/13 8:04:45.370 AM System Preferences[52480]: INFO: FMM: can enable: YES
    10/22/13 8:04:53.708 AM System Preferences[52480]: Unknown serviceID: com.apple.Dataclass.SharedStreams
    10/22/13 8:04:53.796 AM AppleIDAuthAgent[48807]: SERVER AppleIDAuth: Already existing account "jo...ne@?????.???" re-added; succeeded.[ NULL ]  (__AppleIDDoAddAppleID()/AppleIDAuthenticationImpl.cpp #169) com.apple.coreservices.appleid.authentication.peer.0x7fa3eb600e.xpcq

  • Connecting Macs via Airport net

    I am using 3 Macs: A, B and C. All are running OS 10.6.6. I enabled file sharing on all of them. On each Mac I could find the other 2 in the Finder. After connecting all 3 Macs between each other I for example could see in the Finder of Mac A the files of Mac B and Mac C.
    "Suddenly" - I did not change any settings - Mac A and Mac B dont connect any longer. Mac A and Mac B appear in the Finder of Mac A, but no connection is possible. Connection between Mac A and Mac C continues working in both directions. The same for Mac B and Mac C.
    The 3 Macs are connected over WLAN (Time Capsule)
    Regards

    Assuming you are correct that nothing in the configurations have changed, then I would start by shutting down all three computers, the TC, and your cable/DSL modem. Wait at least one minute. First, turn on the modem and wait for the status lights to indicate connection to your ISP. Next, turn on the TC and wait until it boots and the status lights indicate communication with the modem. Lastly, power up the computers. See if this restores your network function.

  • Transfer files bewteen 2 macs via firewire problem

    I have an imac intel 17inch and i want to send files to a g5 powermac tower through a firewire. when i put my g5 into "T" mode and connect the two macs i do not see the g5 drive in my imac desktop. im using a 6 pin to 6 pin firewire cable. what do i need to do to get the drive to show up on my imac so i can put files in it?
    imac has 400mb/s firewire g5 has 800mb/s firewire

    Hi and Welcome to Apple Discussions...
    On the iMac, select the General tab in Finder/Preferences. Make sure: "Hard disks" is selected.
    Try here for more help. http://support.apple.com/kb/ht1661> How to use and troubleshoot FireWire target disk mode
    Carolyn

  • Alias Name Changed after Connecting a Disabled Mailbox

    Hi all, Good day.
    I have a quetion. A mailbox was disabled by mistake, so I have to connect it. Now problem appearred: the correct format of our email address is
    [email protected], but after connecting, the email address became
    [email protected], but the username is still peter.fiala.
    Environment: Windows Server 2008 R2 + Exchange Server 2013.
    How can I connect the disabled mailbox with the correct address/alias? Thank you.

    Hi,
    I was wondering if you have setup of the global email address policy, though you can manually add the email address via going into the properties of the mailbox >> mailbox features >> email address but you need to identify the cause of this email
    change, global email address policy should be at the HUB server - check the properties of the policy.
    To edit the existing email address follow the below steps
    In the EAC, navigate to Recipients > Mailboxes.
    In the list of user mailboxes, click the mailbox that you want to add an email address to, and then click Edit .
    On the mailbox properties page, click Email Address.
    Note:
    On the Email Address page, the primary SMTP address is displayed in bold text in the address list, with the uppercase SMTP value in the Type column.
    Click Add ,
    and then click SMTP to add an SMTP email address to this mailbox.
    Note:
    SMTP is the default email address type. You can also add Exchange Unified Messaging (EUM) addresses or custom addresses to a mailbox. For more information, see "Change user mailbox properties" in the Manage
    user mailboxes topic.
    Type the new SMTP address in the Email address box, and then click OK.
    The new address is displayed in the list of email addresses for the selected mailbox.
    Click Save to save the change.
    Best of luck
    Inderjit

  • More disk permissions problems after updating to 10.5.1

    After updating to 10.5.1, my hard disk shows more disk permissions problems. But for 10.5.0, there is only one permission problem which cannot be repaired.
    Repairing permissions for “Macintosh HD”
    Warning: SUID file "usr/libexec/load_hdi" has been modified and will not be repaired.
    Warning: SUID file "System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/Resources /DiskManagementTool" has been modified and will not be repaired.
    Warning: SUID file "System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Reso urces/Locum" has been modified and will not be repaired.
    Warning: SUID file "System/Library/PrivateFrameworks/Install.framework/Versions/A/Resources/runner " has been modified and will not be repaired.
    Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/readconf ig" has been modified and will not be repaired.
    Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/writecon fig" has been modified and will not be repaired.
    Warning: SUID file "usr/libexec/authopen" has been modified and will not be repaired.
    Warning: SUID file "System/Library/CoreServices/Finder.app/Contents/Resources/OwnerGroupTool" has been modified and will not be repaired.
    Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
    Permissions repair complete

    I'm also getting similar results:
    Repairing permissions for “Macintosh HD”
    Warning: SUID file "usr/libexec/load_hdi" has been modified and will not be repaired.
    Warning: SUID file "System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/Resources /DiskManagementTool" has been modified and will not be repaired.
    Warning: SUID file "System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Reso urces/Locum" has been modified and will not be repaired.
    Warning: SUID file "System/Library/PrivateFrameworks/Install.framework/Versions/A/Resources/runner " has been modified and will not be repaired.
    Permissions differ on "private/var/log/secure.log", should be -rw------- , they are -rw-r----- .
    Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/readconf ig" has been modified and will not be repaired.
    Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/writecon fig" has been modified and will not be repaired.
    Warning: SUID file "usr/libexec/authopen" has been modified and will not be repaired.
    Warning: SUID file "System/Library/CoreServices/Finder.app/Contents/Resources/OwnerGroupTool" has been modified and will not be repaired.
    User differs on "System/Library/Frameworks/JavaVM.framework/Versions/1.5.0/Home/lib/jvm.cfg", should be 0, user is 95.
    User differs on "System/Library/Frameworks/JavaVM.framework/Versions/1.5.0/Libraries/classlist" , should be 0, user is 95.
    Permissions repair complete
    At least the progress bar is fixed
    Mark

  • Connecting iPod via Firewire

    Hey guys,
    i'm sorry if this topic already exists but i didn't find anything.
    By now it isn't possible to connect the iPod Video to a normal
    PC via Firewire, right?
    Does anybody know, if Apple has announced somekind of Upgrade
    or stuff? Or will there always be just USB 2.0 because it's "the technology of the future"?
    Post your answers, please!
      Windows XP  

    By now it isn't possible to connect the iPod Video to a normal
    PC via Firewire, right?
    That's correct. The 5th Gen iPod does not have a firewire controller in it.
    Does anybody know, if Apple has announced somekind of Upgrade
    or stuff?
    No, Apple has not made any indications that firewire will return to the iPod.
    For now, USB is your only syncing option.

  • URLconnection.getLastModified cannot identify file changes after connection

    In my code, I am using URLconnection.getLastModified to watch for file changes. Unfortunately, when the file changes after the URLconnection is made, it does not recognize the file changes. Any ideas on how to make this work?
    Thanks
    public FileChangeMonitor(URL fileURL) throws IOException {
    targetURLconnection = fileURL.openConnection();
    targetURLconnection.setUseCaches(false);// This didn't seem to help - can be deleted.
    public static void main(String[] args) throws InterruptedException {
    FileChangeMonitor testFileChangeMonitor = null;
    try {
    URL MyDataFile = new URL("http://localhost/MyDataFile.xml");
    testFileChangeMonitor = new FileChangeMonitor(MyDataFile);
    } catch (IOException i) {
    testFileChangeMonitor.start();
    @Override
    public void run() {
    long lm = targetURLconnection.getLastModified();
    long lm2 = 0;
    try {
    while (true) {
    Thread.sleep(POLL_INTERVAL);
    lm2 = targetURLconnection.getLastModified();
    if (lm2 != lm) {
    flag = FLAG_CHANGED;
    lm = lm2;
    fireStateChanged();
    System.out.println("MyDataFile Changed!!!");
    } catch (InterruptedException e) {
    e.printStackTrace();
    }

    If (hypothetically speaking) you had an HTTP URL (which of course points to a resource in general but it might happen to be a file in your case), then a common way to examine its last-modified date is to send an HTTP HEAD request and examine the headers in the response.

  • Connect mac via thunderbolt

    Hello,
    I was messing around with my 2011 imac, retina display macbook pro and a thunderbolt cable. I wondered wether it would be possible for the to computers to be "connected", not via any target mode (display or disc). just connected, i know it sounds weird but i think it would be cool to work on both computers with one mouse and keyboard. This way i dont have to switch from one pc to another. Besides using 1 keyboard, sharing files would be super easy.
    I was wondering if a function like this exists. If not, apple please look in to it. I hate restarting my macbook or imac for file transfer via thunderbolt...
    Thanks in advance!

    See Target Display Mode And Thunderbolt.

Maybe you are looking for