Disk related error (-43)

Hey guys, I recently bought an imac G3.
I am trying to install itunes 1.1 on it however i come across a problem.
When i double click on the itunes installer and application called "stuffit"
opens. This says its "decoding macbinary II".
I then get an error message saying:
"sorry, but a disk related error (-43) has prevented the operation from concluding."
Can anyone help me??
thanks, lozzdude.

Have you verified that iTunes will run on Mac OS 9.2?
You should try dragging the iTunes download onto stuffit.
Robert

Similar Messages

No Boot Disk or Boot Disk Failed error

I set up a Pavillion 500-c60 today but when I turned it on, I got a "No Boot Disk or Boot Disk Failed" error. Any suggestions?

Here is a guide related to your problem. It's step by step.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

VM will not boot after moving using Failover Cluster Manager - "a disk read error occurred......"

My current Configuration:
3 node cluster, using clustered shared storage and about 22 VM's.   The Host servers are running 2012 Data Center while all guest are running 2012 Standard. The SAN is EqualLogic and we are using HIT Kit 4.5.
I have a CSV that is running out of space, so I created another CSV so that I could move some of the VM's to a new home.    I tested this by creating a test VM, and moved it successfully 3 times.     I then moved an actual
LIVE VM and while it seemed to move ok, it will now not start.   The message is "a disk read error occurred Press ctrl+alt+del to restart".     I moved the test VM and it failed as well.
I have read several things about this, but nothing seems to relate to my specific issue.   I have verified that VSS is working and free of errors as well.    From the Settings menu for the VM, if I select "Inspect" the drive,
the properties all look fine.    It is a VHDX and both the current file size and maximum disk size seem correct.
The VM's were moved using the "move - virtual machine storage" option within Failover Cluster Manager.
Suggestions?
Thanks.

Lets see if I can answer all of those and I appreciate the brain storming.   This really needs to work, correctly.
1. The Storage is moving.
2.   VM's and SAN are on same device.
3. No, my Clustered Shared Volume, CSV, is out of room, (more one that later)
4. No, I actually have 2 sans grouped together.   However, I'm moving the VM', form one CSV to another CSV on the Same san. EqualLogic PS 6110 is the one I am trying to move VMS around on, and the other SAN not involved in any way except
for it is in a SAN group is an EqualLogic PS6010.
5. No error During move, it took about 5-10 minutes, no error messages.   Note, I did a test and it worked GREAT 3 times.   Now both a live VM, and the test VM are doing the same thing.
6. No, the machine is not to large.   The test making was a 50 gig drive, just 2012 standard installed with updates.   The live VM was a 75 gig VM that was my Trend Micro Server, or anti-virus host.
7. Expand the existing SCV?   Yes I should be able to, but there is an issue there.   The volume was expanded correctly, Equallogic sees the added space, Fail Over cluster manager sees the added space, however disk manager only
sort of does.    When looking at disk manager, there are 2 areas that tell you a little bit about the drive.   The top part and then the bottom part.   The top part only shows 500G, the original size, while the bottom part
says that it is 1 TB in size.   I call Dell's technical support and after they looked at it I was told by the technician that they had seen this a couple of times and the only way to fix it was to move all the VM's to another CSV and delete the troubled
CSV.   I thought about adding more space to the troubled CSV, but its on a production server with about 12 VM's running on it and I did not want to take a chance.   The Trend VM was running on CSV-1 and working fine.
I must admit that the test VM, was on CSV-2.    I moved the Test VM from csv-2 to csv-3 back and forth several times with no errors.   The Trend Server was on CSV-1 and was moved to CSV-3, however it failed. Again, I then moved
the test VM from CSV-2 to CSV-3 and it failed the same way.   I could not test the "TEST - VM" on csv-1 due to csv-1 not having enough space.
8.   I did disable the network from the VM to see if that mattered it did not.
9.   I have not yet had a chance to connect the VHDX to a new VM, but I will do that in about an hour, hopefully.    Once I am able to test that suggestion I will post the results as well.
Again, thanks for all the suggestions and comments, as I had rather have lots to look at and try.   I hope I answered them well enough.
Kenny

Disk Utility Error

Hey there, i am trying to create a new blank disc image in order to burn some data files. I am using disk utility, File -> New -> Blank Image: Give it a name, specify size (700mb,80 min cd) no encryption or anything. trying to use FAT so my windows machine can read it (says the help file) however i get an error "Can't create "disk name.dmg" (invalid argument)"
Making the format osx journaled doesn't come up with the same error. whats goin on?

Works fine here - check System Profiler/Logs for related errors.
Also check free space and be sure you have write permission to your target save locale.

Disk Insertoion Error

From time to time I run into an error message displayed in Tiger 10.4.11:
"Disk Insertion"
Disk you have installed was not readable by this computer:
Several options are provided:
Initialize, eject, cancel.
I have not installed a new disk.
I do have a external firewire enclosure which often take time to mount on the desk top--but there is no drive that I have recentaly installed without mounting it.
Is this just a pesky error that can be eliminated in the .plist files and which one is it?
bobg

I do not know which drive this disk insertion error relates to.
If I depress eject, nothing goes away.
I may be related to a different Titanium Scan Disk memory stick which I may have inserted and ejected. That display has come up on one the 4 GB stick that I use because of the normal ejection process is not that Mac friendly.
What has been noticed is my new LaCie d2 Quadra is linked with the Maxtor 200 HD in an MacAlly FW/USB enclosure. It is that enclosure which occasionally flickers red and green but I notice that it is doing this when the LaCie drive light flickers. This LaCie drive has been set to automatic. The light on the Lacie flickers and the light on the MacAlly flickers and may go red and then after a routine it will turn green.
When I go to the Systems utilities disk, it usually finds the drive after a search period and the drive mounts.
When the computer is restarted or shut down and rebooted, once in a while this disk insertion error is displayed it seems randomly.
Usually both drives mount on the desk top regularly. Occasionally the Maxtor in the MacAlly does not. It may mount after a time when the Disk utility searches the drives and mounts them.
I will check the Maxtor on my wife's Laptop G-4 iBook to see if it mounts normally.
I do not know if this is related to a messed up .plist file or what.
I also do not know if is related to the Mac Ally enclosure drive or something else.
bobg

Out of Disk Space Error while Generating Pivot Table

Hi!
I encountered the following error while Generating Pivot Table -
View pivotTableView!1 returned the following message:
Odbc driver returned an error (SQLExtendedFetch).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC
Location: saw.odbc.statement.fetch,
saw.cube.engine.execute.dataTraversal, saw.cube.engine.execute,
saw.cube.cache.processCube, saw.views.pivottable.displayer,
saw.subsystem.portal, saw.httpserver.request,
saw.rpc.server.responder, saw.rpc.server,
saw.rpc.server.socketServer, saw.threadPool, saw.threadPool,
saw.threads
File: ./project/webodbcaccess/odbcresultsetimpl.cpp, Line: 182
State: S1000. Code: 10058. [NQODBC] [SQL_STATE: S1000] [nQSError:
10058] A general error has occurred. Out of disk space. (S1000)

user11204020, what's your question?? :)
You're getting an out of disk space error ... which means you've run out of disk space, no?
Since it's saw related I'm guessing you'll need to make more space available to your OracleBIdata/tmp directory

Lightroom 4.3 Incorrectly gives 'critically low on disk space' errors

Lightroom 4.3 today started popping up random 'critically low on disk space' errors for the drive housing the catalog file.
The drive in question has over 500GB free. There are no errors in Windows logs showing that OS is throwing these errors.
Very frustrating to have this error pop up every couple of minutes.
Has anyone else run into this issue, and if so, found a fix?
-Daniel

I have the same issue with LR4.3. The catalog is on a disk that currently has 283 GB free out of 698 GB total.
Occassionally I get the out of space message:
Ad additional problem I am having is that when I click to IMPORT photos, the Import panel is excrutiatingly slow. Windows occassionally thinks that the program has crashed after I do something like start typing keywords to assign to the images about to be imported. The slowness occurs before any actual import is ordered or even an import source is selected.
I don't know if these problems are related, but they are both very annoying!
The system info:
Lightroom version: 4.3 [865747]
Operating system: Windows 7 Business Edition
Version: 6.1 [7601]
Application architecture: x64
System architecture: x64
Logical processor count: 8
Processor speed: 2.3 GHz
Built-in memory: 8073.0 MB
Real memory available to Lightroom: 8073.0 MB
Real memory used by Lightroom: 1389.0 MB (17.2%)
Virtual memory used by Lightroom: 1399.7 MB
Memory cache size: 1051.7 MB
Maximum thread count used by Camera Raw: 4
System DPI setting: 96 DPI
Desktop composition enabled: Yes
Displays: 1) 1920x1080, 2) 1920x1080, 3) 1680x1050
Application folder: C:\Program Files\Adobe\Adobe
Photoshop Lightroom 4.3
Library Path: D:\Images -- ALL\Lightroom\Lightroom 4
Catalog.lrcat
Settings Folder: C:\Users\Galen\AppData\Roaming\Adobe
\Lightroom
Adapter #1: Vendor : 8086
          Device : 126
          Subsystem : 4a31028
          Revision : 9
          Video Memory : 64
Adapter #2: Vendor : 10de
          Device : dfa
          Subsystem : 14a31028
          Revision : a1
          Video Memory : 7cf
AudioDeviceIOBlockSize: 1024
AudioDeviceName: Speakers / Headphones (IDT High
Definition Audio CODEC)
AudioDeviceNumberOfChannels: 2
AudioDeviceSampleRate: 44100
Build: 6.0x552
Direct2DEnabled: false
GL_ALPHA_BITS: 8
GL_BLUE_BITS: 8
GL_GREEN_BITS: 8
GL_MAX_3D_TEXTURE_SIZE: 2048
GL_MAX_TEXTURE_SIZE: 8192
GL_MAX_TEXTURE_UNITS: 8
GL_MAX_VIEWPORT_DIMS: 8192,8192
GL_RED_BITS: 8
GL_RENDERER: Intel(R) HD Graphics Family
GL_SHADING_LANGUAGE_VERSION: 1.40 - Intel Build
8.15.10.2418
GL_VENDOR: Intel
GL_VERSION: 3.1.0 - Build 8.15.10.2418
OGLEnabled: true
OGLPresent: true
GL_EXTENSIONS: GL_EXT_blend_minmax GL_EXT_blend_subtract
GL_EXT_blend_color GL_EXT_abgr GL_EXT_texture3D
GL_EXT_clip_volume_hint GL_EXT_compiled_vertex_array
GL_SGIS_texture_edge_clamp GL_SGIS_generate_mipmap
GL_EXT_draw_range_elements GL_SGIS_texture_lod
GL_EXT_rescale_normal GL_EXT_packed_pixels
GL_EXT_texture_edge_clamp GL_EXT_separate_specular_color
GL_ARB_multitexture GL_EXT_texture_env_combine
GL_EXT_bgra GL_EXT_blend_func_separate
GL_EXT_secondary_color GL_EXT_fog_coord
GL_EXT_texture_env_add GL_ARB_texture_cube_map
GL_ARB_transpose_matrix GL_ARB_texture_env_add
GL_IBM_texture_mirrored_repeat GL_EXT_multi_draw_arrays
GL_NV_blend_square GL_ARB_texture_compression
GL_3DFX_texture_compression_FXT1
GL_EXT_texture_filter_anisotropic
GL_ARB_texture_border_clamp GL_ARB_point_parameters
GL_ARB_texture_env_combine GL_ARB_texture_env_dot3
GL_ARB_texture_env_crossbar
GL_EXT_texture_compression_s3tc GL_ARB_shadow
GL_ARB_window_pos GL_EXT_shadow_funcs GL_EXT_stencil_wrap
GL_ARB_vertex_program GL_EXT_texture_rectangle
GL_ARB_fragment_program GL_EXT_stencil_two_side
GL_ATI_separate_stencil GL_ARB_vertex_buffer_object
GL_EXT_texture_lod_bias GL_ARB_occlusion_query
GL_ARB_fragment_shader GL_ARB_shader_objects
GL_ARB_shading_language_100
GL_ARB_texture_non_power_of_two GL_ARB_vertex_shader
GL_NV_texgen_reflection GL_ARB_point_sprite
GL_ARB_fragment_program_shadow
GL_EXT_blend_equation_separate GL_ARB_depth_texture
GL_ARB_texture_rectangle GL_ARB_draw_buffers
GL_ARB_color_buffer_float GL_ARB_half_float_pixel
GL_ARB_texture_float GL_ARB_pixel_buffer_object
GL_EXT_framebuffer_object GL_ARB_draw_instanced
GL_ARB_half_float_vertex GL_EXT_draw_buffers2
GL_WIN_swap_hint GL_EXT_texture_sRGB GL_ARB_multisample
GL_EXT_packed_float GL_EXT_texture_shared_exponent
GL_ARB_texture_rg GL_ARB_texture_compression_rgtc
GL_NV_conditional_render GL_EXT_texture_swizzle
GL_ARB_sync GL_ARB_framebuffer_sRGB
GL_EXT_packed_depth_stencil GL_ARB_depth_buffer_float
GL_EXT_transform_feedback GL_EXT_framebuffer_blit
GL_EXT_framebuffer_multisample GL_ARB_framebuffer_object
GL_EXT_texture_array GL_EXT_texture_integer
GL_ARB_map_buffer_range GL_EXT_texture_snorm
GL_INTEL_performance_queries GL_ARB_copy_buffer
GL_ARB_sampler_objects GL_NV_primitive_restart
GL_ARB_seamless_cube_map GL_ARB_uniform_buffer_object
GL_ARB_depth_clamp GL_ARB_vertex_array_bgra
GL_ARB_draw_elements_base_vertex
GL_ARB_fragment_coord_conventions
GL_EXT_gpu_program_parameters GL_ARB_compatibility
GL_ARB_vertex_array_object

Does anyone know how to solve: "Firmware update failure. Disk write error"?

Hi all,
Here is the list of all what went wrong and where I am now:
1. My Ipod worked well
2. I wanted to update it, you know, the normal thing with Itunes
3. Every time I tried, my computer froze. I was unable to add only one song (both automatically and manually).
4. I took my external drive (where my music is) at work and tried again: same result.
5. I decided to run the Updater I have on the CD that came with the Ipod.(2005-02-07; I usually avoid the newer version, having had once a problem when putting a newer version of Updater).
6. The Updater was unable to operate any action on my Ipode (I don't remember the messages now).
7. Like I tried what I describe here above like a hundred time. I decided to format the Ipod with Windows (My Computer, right click on the Ipod, format).
8. It did and now I have only the famous folder with an exclamation mark on my Ipod.
9. Now when I am running the Updater, it says it cannot Restore the factory settings giving this message "Firmware update failure. Disk write error".
I would appreciate any help because, during the last 2 hours, I read and tried all I found on the Support Help here on the Apple web side without any result yet.
Thank a lot for your answer

Hi Cyrille,
Have you looked at Knowledge Base Document #301267 on "Disk cannot be read from or written to" when syncing iPod or "Firmware update failure" error when updating or restoring iPod?
Jon
Mac Mini 1.42Ghz, iPod (All), Airport (Graphite & Express), G4 1.33Ghz iBook, G4 iMac 1Ghz, G3 500Mhz, iBook iMac 233Mhz, eMate, Power Mac 5400 LC, PowerBook 540c, Macintosh 128K, Apple //e, Apple //, and some more... Mac OS X (10.4.5) Moto Razr, iLife '06, SmartDisk 160Gb, Apple BT Mouse, Sight..

I've cleared almost 30 gig off of my hard drive in the past 2 weeks, and it will temporarily show that in the Get Info box. But hours later, I am still getting a disk full error and all of the memory has disappeared.

I've cleared almost 30 gig off of my hard drive in the past 2 weeks, and it will temporarily show that in the Get Info box. But hours later, I am still getting a disk full error and all of the memory has disappeared. I have cleared my backup logs from Time Machine, checked the mail folder, cleaned out tons of photos and videos and it still keeps filling back up.
In checking the log files, here is the message repeated over and over....
Jul 4 07:18:13 Donald-Keele-Jrs-iMac-123.local CalendarAgent[213]: CoreData: error: (21) I/O error for database at /Users/donjr/Library/Calendars/Calendar Cache. SQLite error code:21, 'unable to open database file'
Jul 4 07:18:13 Donald-Keele-Jrs-iMac-123.local CalendarAgent[213]: Core Data: annotation: -executeRequest: encountered exception = I/O error for database at /Users/donjr/Library/Calendars/Calendar Cache. SQLite error code:21, 'unable to open database file' with userInfo = {
NSFilePath = "/Users/donjr/Library/Calendars/Calendar Cache";
NSSQLiteErrorDomain = 21;
Jul 4 07:18:14 Donald-Keele-Jrs-iMac-123.local cfprefsd[180]: CFPreferences: error creating file /Users/donjr/Library/Preferences/com.apple.iPhoto.plist.t3l894p: 28
Jul 4 07:18:30 Donald-Keele-Jrs-iMac-123.local Printer Pro Desktop[275]: Empty task
Jul 4 07:18:33 Donald-Keele-Jrs-iMac-123.local Microsoft Sync Services[8149]: [0x16697c0] |ISyncSession|Warning| com.microsoft.Entourage2008: transitioning to cancel - session cancelled by server: Client 'com.microsoft.Entourage2008' tried to start a session for the plan 45AD80C3-0D52-4CF2-8CBA-103564B6C47C and the plan no longer exists.
Jul 4 07:18:33 Donald-Keele-Jrs-iMac-123.local Microsoft Sync Services[8149]: Warning: NSBundle NSBundle </Applications/Microsoft Office 2008/Office/Microsoft Sync Services.app/Contents/Resources/MicrosoftOfficeNotes.syncschema> (not yet loaded) was released too many times. For compatibility, it will not be deallocated, but this may change in the future. Set a breakpoint on __NSBundleOverreleased() to debug
Jul 4 07:18:33 Donald-Keele-Jrs-iMac-123.local Microsoft Sync Services[8149]: Warning: NSBundle NSBundle </Users/donjr/Library/Sync Services/Schemas/MicrosoftOfficeNotes.syncschema> (not yet loaded) was released too many times. For compatibility, it will not be deallocated, but this may change in the future. Set a breakpoint on __NSBundleOverreleased() to debug
Jul 4 07:18:45 Donald-Keele-Jrs-iMac-123 kernel[0]: (default pager): [KERNEL]: default_pager_backing_store_monitor - send LO_WAT_ALERT
Jul 4 07:18:45 Donald-Keele-Jrs-iMac-123 kernel[0]: macx_swapoff SUCCESS
Jul 4 07:19:31 Donald-Keele-Jrs-iMac-123.local Printer Pro Desktop[275]: Empty task
Any ideas on what to do next?
I'm running and iMac 20-inch early 2009
Processor 2.66 GHz Intel Core 2 Duo
Memory 8 GB 1067 MHz DDR3
Graphics NVIDIA GeForce 9400 256 MB
Software OS X 10.8.4 (12E55)

Step 1
Quit Calendar. Triple-click the line below to select it:
~/Library/Calendars/Calendar Cache
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu. A Finder window should open with a file named "Calendar Cache" selected.
Move the selected file to the Trash. There may be one or two other files in the same folder with names that begin in "Calendar Cache". If so, delete those files too.
Step 2
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash as well:
iPhoto ▹ Empty Trash
Then reboot. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of your data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
To locate large files, you can use Spotlight. That method may not find large folders that contain a lot of small files.
You can more effectively use a tool such as OmniDiskSweeper (ODS) to explore your volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
Install ODS in the Applications folder as usual. Quit it if it's running.
Triple-click the line of text below to select it, then copy the selected text to the Clipboard (command-C):
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The application window will open, eventually showing all files in all folders. It may take some minutes for ODS to list all the files.
I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with ODS, quit it and also quit Terminal.

"A Disk Read Error Has Occured" past 239 FSB?

The title says it all. I'm runnin an Neo Platinum 2 and when booting up overclocked past 239 FSB I get "A Disk Read Error Has Occured" and it asks me to reboot. Is this as simple as my SATA being overclocked too far? I was under the impression this board had an SATA lock, but I could be wrong. Any suggestions on getting past this? Or have I reached my peak?

Quote
Originally posted by sarlen
67 mghz? That doesn't make any sense - giving it a try right now though. The ram is tricky though, I hear Ballistix is unrealiable. I'm doing 2.5-2-2-5 at 243, but nothing will make it run 255 for me (next step up to keep my cpu at 2.55). I suppose 243 isn't bad, anyone have any ideas on getting more out of this ram though?
my 3200XL doesn't even reach 210 with ras cas at 2 :/

"firmware update failure. disk write error."

i get this when i use the ipod Updater after clicking "restore"... this thing is giving me a headache. Also get the previous mentioned "cannot read from or write to disk" error when using itunes after a couple downloads. i followed the steps in the link to those issues and ran some updates on my PC and still the same. HELP

Have you read both
For Firmware update failure. Disk write error please see
http://docs.info.apple.com/article.html?artnum=301267
http://docs.info.apple.com/article.html?artnum=300836

"No Disk Found" error during installation of Solaris 10[11/06] on HP 6710b

Hallo Guys,
I am trying to install Solaris 10 on my HP 6710b lap top but it fails with "No Disk Found" error.
I used "Solaris 10 support tool" to check my system and it reports that my system is supported.
You can find the report bellow. I am sure that my disk is OK and I am also using "CD-ROM" option in BIOS for installing solaris from my Solaris DVD.
I have also updated the drivers using "CPQary3-1.71-solaris10-i386".
Please help me.
Thanks,
Qumar
Report of Sun Device Detection Tool
The table below displays the devices detected in your system along with the corresponding driver status in Solaris 10 8/07 on x86/x64 platforms.
All detected devices are supported by Solaris OS.
Solaris Driver 32-bit
Solaris Driver 64-bit
Device Type
Vendor Name
Device Name
Solaris Bundled Driver: pcic
Solaris Bundled Driver: pcic
Bridge
Ricoh Co Ltd
RL5c476 II
Solaris Bundled Driver: hci1394
Solaris Bundled Driver: hci1394
Firewire
Ricoh Co Ltd
R5C832 IEEE 1394 Controller
Third-Party Driver: bcme (Note-1)
Third-Party Driver: bcme (Note-1)
Network
Broadcom Corporation
NetLink BCM5787M Gigabit Ethernet PCI Express
Solaris Bundled Driver: ahci
Solaris Bundled Driver: ahci
Storage
Intel Corporation
82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Controller #1
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Controller #2
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Controller #3
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Contoller #4
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Controller #5
Solaris Bundled Driver: ehci
Solaris Bundled Driver: ehci
USB
Intel Corporation
82801H (ICH8 Family) USB2 EHCI Controller #1
Solaris Bundled Driver: ehci
Solaris Bundled Driver: ehci
USB
Intel Corporation
82801H (ICH8 Family) USB2 EHCI Controller #2
[W] Solaris Bundled Driver: audiohd
[W] Solaris Bundled Driver: audiohd
Multimedia
Intel Corporation
82801H (ICH8 Family) HD Audio Controller
Solaris Bundled Driver: pci-ide
Solaris Bundled Driver: pci-ide
Storage
Intel Corporation
82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller
[W] Solaris Bundled Driver: vgatext
[W] Solaris Bundled Driver: vgatext
Video
Intel Corporation
Mobile GM965/GL960 Integrated Graphics Controller
Open Solaris Driver: wpi (Note-2)
Open Solaris Driver: wpi (Note-2)
Network
Intel Corporation
PRO/Wireless 3945ABG Network Connection
[W]: (1) No Dedicated Xorg Driver supporting Graphic Interface
(2) Driver support for indicated device not guaranteed
Note-1: http://www.broadcom.com/support/ethernet_nic/.
Note-2: http://opensolaris.org/os/community/laptop/wireless/wpi.

Hallo Guys,
I am trying to install Solaris 10 on my HP 6710b lap top but it fails with "No Disk Found" error.
I used "Solaris 10 support tool" to check my system and it reports that my system is supported.
You can find the report bellow. I am sure that my disk is OK and I am also using "CD-ROM" option in BIOS for installing solaris from my Solaris DVD.
I have also updated the drivers using "CPQary3-1.71-solaris10-i386".
Please help me.
Thanks,
Qumar
Report of Sun Device Detection Tool
The table below displays the devices detected in your system along with the corresponding driver status in Solaris 10 8/07 on x86/x64 platforms.
All detected devices are supported by Solaris OS.
Solaris Driver 32-bit
Solaris Driver 64-bit
Device Type
Vendor Name
Device Name
Solaris Bundled Driver: pcic
Solaris Bundled Driver: pcic
Bridge
Ricoh Co Ltd
RL5c476 II
Solaris Bundled Driver: hci1394
Solaris Bundled Driver: hci1394
Firewire
Ricoh Co Ltd
R5C832 IEEE 1394 Controller
Third-Party Driver: bcme (Note-1)
Third-Party Driver: bcme (Note-1)
Network
Broadcom Corporation
NetLink BCM5787M Gigabit Ethernet PCI Express
Solaris Bundled Driver: ahci
Solaris Bundled Driver: ahci
Storage
Intel Corporation
82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Controller #1
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Controller #2
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Controller #3
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Contoller #4
Solaris Bundled Driver: uhci
Solaris Bundled Driver: uhci
USB
Intel Corporation
82801H (ICH8 Family) USB UHCI Controller #5
Solaris Bundled Driver: ehci
Solaris Bundled Driver: ehci
USB
Intel Corporation
82801H (ICH8 Family) USB2 EHCI Controller #1
Solaris Bundled Driver: ehci
Solaris Bundled Driver: ehci
USB
Intel Corporation
82801H (ICH8 Family) USB2 EHCI Controller #2
[W] Solaris Bundled Driver: audiohd
[W] Solaris Bundled Driver: audiohd
Multimedia
Intel Corporation
82801H (ICH8 Family) HD Audio Controller
Solaris Bundled Driver: pci-ide
Solaris Bundled Driver: pci-ide
Storage
Intel Corporation
82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller
[W] Solaris Bundled Driver: vgatext
[W] Solaris Bundled Driver: vgatext
Video
Intel Corporation
Mobile GM965/GL960 Integrated Graphics Controller
Open Solaris Driver: wpi (Note-2)
Open Solaris Driver: wpi (Note-2)
Network
Intel Corporation
PRO/Wireless 3945ABG Network Connection
[W]: (1) No Dedicated Xorg Driver supporting Graphic Interface
(2) Driver support for indicated device not guaranteed
Note-1: http://www.broadcom.com/support/ethernet_nic/.
Note-2: http://opensolaris.org/os/community/laptop/wireless/wpi.

Certificate Related Error Message/Please Help

Today I received an "Unable to verify SSL server pop.gmail.com" message on my Mail server. I transfer mail from gmail to Mail.
"Mail was unable to verify the identity of this server, which has a certificate issued to "pop.gmail.com". The error was:
The certificate for this server has expired.
You might be connecting to a computer that is pretending to be "pop.gmail.com", and putting your confidential information at risk. Would you like to continue anyway?"
In the lower box, it lists the Version, Serial Number, Issuer Name (which is from Zaire, Western Cape, and lists the organization as Thawte Consulting cc and other info, Subject name is Google Inc, common name is pop.gmail.com, then gives a Signature Algorithm, Parameters, etc.
It won't let me Copy and Paste so I have not hit the Continue button for concern of losing that info for reference.
I went to Help which instructed me to do the following:
I'm getting a certificate-related error message
If you get an error message with the word "certificate" in it, make a copy of the message and contact your Internet service provider (ISP) or network administrator. The error message may help them diagnose your problem.
If your mail server uses a self-signed Secure Sockets Layer (SSL) certificate, each time you open Mail you'll see an error message stating that the certificate is not valid. You can continue, but you'll see the same message every time you open Mail. To stop seeing this message, you can permanently accept the certificate.
To permanently accept a self-signed SSL certificate:
Click the Show Certificate button in the error message.
The certificate appears with a certificate icon in the upper-left corner.
Hold down the Option key and drag the certificate icon to the desktop.
Double-click the certificate icon on the desktop, and choose X.509 Anchors from the pop-up menu. Click Add.
The certificate is permanently accepted.
You must have permission to administer the computer for this procedure to work.
For information about encryption, click "Tell me more."
Instead of asking for the "580 Anchors" , it asked simply "Do you want to add the certificates from pop.gmail.com.cer to a keychain?"
I clicked "Add"
The pop.gmail.com certificate AND Thawte Freemail Member AND Thawte Personal Freemail certificates is now entered in my Keychain.
There are no dates listed under "Created" or "Modified" for those certs under Keychain.
IS THIS OK OR DO I HAVE A PROBLEM SINCE THESE THAWTE CERTS ARE LOCATED IN ZAIRE???
IF IT IS A PROBLEM, HOW DO I FIX/CHANGE/OK/DELETE/MODIFY, ETC. IT? PLEASE BE CLEAR.
CAN I/SHOULD I JUST DELETE ALL THREE/SOME OF THE CERTS NOW IN KEYCHAIN?
WILL I STILL BE ABLE TO GET MAIL AS BEFORE THIS MESSAGE IF DELETE THE CERTS?
I believe this is the first time I have received a message concerning certificates so I am naive concerning this.
THANK YOU.

I had similar gmail/cert problem yesterday - not for the first time!
I deleted the prefs (user/library/preferences), deleted the gmail account (mail prefernces), ran applejack ( http://applejack.sourceforge.net/ ) & added the account from scratch.
Annoying I know, and my inbox was 200+ emails but nobody seems to know what or why this happens (my previous post) http://discussions.apple.com/thread.jspa?threadID=243186&tstart=0
Perhaps this is related to certain emails (an email scam), i run 3 macs & the mail account on the affected machine receives my business email & this is the only machine the gmail/cert problem occurs.

I am a OS10.7.4 user. yesterday i bought a Lacie external hard disk but error message appear said " You cant open the applicant LaCie setup assistant because PowerPC applicants are no longer support". please help me how to connect my mac with Lacie??

i am a OS10.7.4 user. yesterday i bought a Lacie external hard disk but error message appear said " You cant open the applicant LaCie setup assistant because PowerPC applicants are no longer support". please help me how to connect my mac with Lacie??

You do not need the Setup Assistant; in fact, you do not need any software on an external hard drive. I have two LaCie's; I erased the drive as soon as I plugged it in. You will need to format it anyway because most hard drives come Windows formatted. So, if you only want to use it with the Mac, highlight it in Disk Utility and choose Mac OS Extended (Journaled) as the format and the GUID Partition scheme under Options. While doing that, it will erase the drive (and get rid of the LaCie software) - once finished, your drive is ready to use for Time Machine or any other backup plans you have for it.

A strange Java related error occured when I tried to install a software

When I tried to install Maple 12 on my PC, I got a Java-related error as follow:
java.lang.NoClassDefFoundError: Could not initialize class javax.swing.UIManager
     at javax.swing.JPanel.updateUI(Unknown Source)
     at javax.swing.JPanel.<init>(Unknown Source)
     at javax.swing.JPanel.<init>(Unknown Source)
     at javax.swing.JPanel.<init>(Unknown Source)
     at javax.swing.JRootPane.createGlassPane(Unknown Source)
     at javax.swing.JRootPane.<init>(Unknown Source)
     at javax.swing.JFrame.createRootPane(Unknown Source)
     at javax.swing.JFrame.frameInit(Unknown Source)
     at javax.swing.JFrame.<init>(Unknown Source)
     at com.zerog.ia.installer.LifeCycleManager.g(DashoA10*..)
     at com.zerog.ia.installer.LifeCycleManager.h(DashoA10*..)
     at com.zerog.ia.installer.LifeCycleManager.a(DashoA10*..)
     at com.zerog.ia.installer.Main.main(DashoA10*..)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at com.zerog.lax.LAX.launch(DashoA10*..)
     at com.zerog.lax.LAX.main(DashoA10*..)
My OS is Windows XP Professional with SP3. However, I managed to install this version on a virtual machine (which also runs Windows XP SP3) therefore the problem does not come from the installer.
What can I do now to install Maple 12? I really need this software...
Thanks!
Edited by: uhobasa on Sep 28, 2008 6:41 PM

Did you find the solution for this problem? I am experiencing the same behavior trying to run Freemind.

Disk related error (-43)

Similar Messages

Maybe you are looking for