Disk space after deleting partition

Hello
I had partitioned my 500gb HD into two. One was used for osx (~400gb) and another ~60gb for Bootcamp to run windows.
After Yosemite the bootcamp had issues and I decided to erase that partition leaving me with this
The top Macintosh HD says 499 GB and the bottom HD says 400GB
My question is.... Is there a way to have bottom HD combine with the above? does it matter?

More clarification to the question
My Mac says I have 500GB but the Macintosh HD says I have 400gb (I'm assuming this is because I had partitioned the 500gb into 400/100) But I have since then deleted the 100gb but I can't see it. Where would this be?

Similar Messages

  • How do i recover disk space after deleting windows partition?

    I have a macbook pro running on maverick. I removed the windows partition using bootcamp assistant, but I did not gain the disk space back. The disk space is 500gb but it's still showing 250gb?

    Yes, that matters. So your partition map looks something like this:
    You see one single space surrounded in blue with the disk name in the center, sort of like the above. But, you say that this space is only 250 GBs of your 500 GB drive. In other words the space in the Size field reads 250 GBs, mol? Am I correct in my understanding?
    I suggest you might give this a try: repair the hard drive using Disk Utility. Then restart the computer. See if that recovers the space. It would also help if you could send me a screen image like mine but of your Disk Utility display on the same settings.

  • Why Oracle Linux 5 cannot recover disk space after delete files ?

    Folks,
    Hello. When I create a Virtual Machine for Oracle Linux 5 to install EBS R12, I allocate 300GB to the VM. I download EBS R12 Source Files (45.7GB) and unzip the files (46GB). Total size of stage area directory(EBS_R12) is 91.7GB.
    Because some files are corrupted and cannot install, I move the folder EBS_R12 into trash but cannot empty trash. I move EBS_R12 from trash back to the directory. Then at root user, use command "rm -rf " to delete EBS_R12 completely.
    I shut down Oracle Linux 5 and restart it, 91.7GB disk space cannot recover.
    I download some other files into Oracle Linux files and then delete those files, but disk space cannot be recovered either.
    It seems that OEL5 virtual disk only can expand but cannot be reduced. The VM disk space is less than 200GB now and not enough to install EBS R12.
    Can any folks tell me how to make 91.7GB disk space and some more disk space come up ?

    Folks,
    Hello. Thanks a lot for replying.
    Host OS is Windows 7, Guest OS is Oracle Linux 5 on the top of VMPlayer 3. The VM of Oracle Linux 5 is created on the external USB drive and not on the local hard disk.
    There is a directory /tmp/VMwareDnd/376c7cae/EBS_R12 in Oracle Linux 5 file system. I copy/Paste the folder of EBS_R12 from Windows 7 into Oracle Linux 5. All of zip files and unzipped files are placed in the folder of EBS_R12.
    After EBS_R12 is deleted, the external USB drive(F:) doesn't come up 91.7GB disk space.
    My question is:
    Where to run "boot>linux rescue" command ?
    Does this command work correctly in the external USB drive ?

  • Reclaim disk space after delete an index

    Hi ,
    I have deleted unused indexes from a history table to reclaim the disk space was allocated for these indexes , yet the size on the disk is the same , any steps I can follow to achieve this would be greatly appreciated..
    indexes size is 70 GB
    table size is 45 GB , # of rows is above 200 Million
    Thanks in advance

    in order to reclaim space after your big delete.  Don't shrink your data files unless you have no other choice.
    The space will automatically go back to SQL server. You don't have to do anything.
    The database size will be the same plus the growth of your log file due to logging the transactions. However, internally, SQL server knows that it still has that space to play with.
    Other wise you can go for  update the statistics and rebuild indexes . but I think it would be the part of your normal weekend nightly maintenance plan
    Please click "Propose
    As Answer" if a post solves your problem, or "Vote
    As Helpful" if a post has been useful to you

  • Lost 110 GB of disk space after deleting files in target mode... A mystery?

    Dear all,
    Yesterday, I used my MBP in Target Disk mode and deleted a directory with approx. 110 GB of files in it. Now I found out that this space is mysteriously gone: the available free space on my hard disk did not increase, and the files are not in the trash or anywhere where I can find them.
    I tried Disk Utility doing ‘Verify Disk’ as well as ‘Repair Disk Permissions’, but with no success.
    Could any one advice me how I can recover my disk space?
    Thanks in advance....
    /Rudi

    Thanks, Tony.
    No, they are not in the trash of the other computer. It would also have taken the computer a while to transfer these files (110 GB takes a while, even over FireFire 800).
    The issue is not that I want to recover these files (I have backup copies), I just would like to have my disk space back. It is siting somewhere but 'lost' to the DOS.
    Best, Rudi

  • Reclaiming disk space after deleting virtual hard drive

    Hello forum, I have to temporarily create a 200GB virtual disk and attach to a virtual server. The purpose of the disk is for moving some files across different servers. Once the files have been moved, I would like to delete the disk and release the space back to the datastore. Can this be done? I have a datastore with enough disk space from which the temporary disk will be created. But I would like to release the space back to that datastore once purpose is solved. Any inputs?
    Thanks in advance.

    Like already stated above, make sure select the option Remove from virtual machine and delete files from disk when removing the disk from virtual machine. Take in mind that VM must not be running from a snapshot, otherwise only the delta file will be deleted: VMware KB: Removing a harddisk from a virtual machine through the vSphere client does not release the desired space.…

  • Recovering disk space after deleting files.

    Hello,
    I am used to using Panther and now I'm using Leopard. When I deleted files then emptied the trash and later logged out or shut down it would ask me do I want to recover the disk space on my drive, then once this is finished I could see the more space on my hard drive. I find now that with Leopard I have deleted a lot of old music etc that I copied over and I have emptied the trash but the file space doesn't get reclaimed. So, my question is: does emptying the trash really delete the fills or is there something I need to do additionally to get the disk space back once I delete something.
    Thanks in advance for any help.

    I have the same problem. I transferred and deleted several gigs of music and photo files but the hard drive is not recognizing the free space. any help would be greatly appreciated. thanks.

  • Disk Utility lost disk space after cancelling partition resizing

    Hi,
    I accidentally cancelled the process of creating new partition (by shrinking old).
    Now I have 50 GB of disk space lost.
    How can I fix it?
    Thanks.

    Yeah, I found the solution of the space problem caused by same reason here:
    Disk Utility quit. Missing HD space!
    Nothing happened. So probably will have to reinstall it.

  • Regain hard drive space after deleting partition

    Hello all,
    I had a lot of issues after updating to Snow Leopard so I ended up doing a clean install of SL rather than the update to fix all the issues. It works great now with no lag or any issues of the sort. However I was following a tutorial on how to do the clean install and it had me first partition the hard drive then install. Later I went to erase the old partition of the hard drive and now I cannot regain the space with the new partition. (P.S. sorry if I am not explaining this well.)
    Here is a picture showing my issue. 30 gb of my hard drive is just greyed out and I cannot figure out how to recover that.
    Thank you guys if you can help me resolve this!

    I don't think you can without starting from scratch and re-partitioning the drive with 1 partition.
    Had the unused space been at the bottom of the window, I understand you could have dragged the divider down to regain the space, however it doesn't work dragging the top up.

  • Reclaim Disk Space After Deleting Versions.

    We've recently went through a few large Document Libraries using Power-Shell and deleted tens of thousands of versions of files we didn't need the version history for. 
    Unfortunately the DB size has not gotten any smaller. I went in to try and shrink the DB however there is very little available space to reclaim. 
    Is there something else that needs to be done after versions are deleted to fully release the drive space on our SQL box?

    Measuring the MDF/LDF isn't going to be a good calculation. For one, you have padding done by SQL Server itself, then you have index space and other metadata storage, and of course you have all of the information that is associated with the BLOB anyhow.
    But with 3 versions of the document, again only the differences are stored, so it wouldn't be 600KB * 3 in that case.
    http://blogs.technet.com/b/wbaer/archive/2012/11/12/introduction-to-shredded-storage-in-sharepoint-2013.aspx
    Also, why are you wanting to shrink the database? Shrinking destroys the indices and generally degrades performance (e.g. if you encounter another data file expansion).
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Lost all my HDD space after cancelling partition!

    Short Story...Ive lost all my HDD space after cancelling partition, i had 1TB now i only have 13gb
    Long story...I installed parraeles desktop 8, went to install windows 7, it said i only had 60gb free, went to disk utility to try and partition to 150gb but only allowed me to partition 50:50 for unknown reason, i began the partition and then cancelled it as i wanted to try and only allow 150gb for windows 7, now it does not show partition at all, and says i only have 13gb free!!!
    PLEASE HELP ASAP!!!!!!
    Running OXs 10.8.2

    Do you have a Time Machine backup of your system, if not make one.  Then go back into disk utility and delete the partition you just made.  To install Windows 7 via Parallels Desktop 8 you don't need to partition your hard drive the program takes care of the entire install.  

  • External HD won't free-up space after deleting files

    Hello. My old Maxtor 500 Gb external hard-drive won't free-up any space after deleting many, many files. I'm using a late 2009 iMac i5 desktop with Snow Leopard. I had 6 Time Machine backups of my old MacBook Pro on the drive - each taking up roughly 70-80 Gb of space. I deleted 3 of the Time Machine backups as they were close enough in date to other backups so I wasn't going to lose any data. This should have freed up more than 200 Gb of space on the external hard drive. However, the hard drive still shows having only 10 Gb of space available. I deleted the Trash from the Dock. The Trash is empty. I unmounted the hard drive, turned it off and reconnected it. I restarted the computer. Still no change. Please help me. Thanks!

    Welcome to Apple Discussions-
    Are you using FileVault? If so, you have to log out or restart in order for the disk space to be reclaimed.

  • Exfat drive does not free up space after deleting files

    My external exfat formatted drive does not free up space after deleting files using a mac....however if I delete files using a PC, it will free up space.
    I've even tried the *erase free space* using Disk Utility, but nothing.....
    Thoughts/Suggestions??

    Thanks for the suggestion.
    I ran WhatSize and here is the result. Oddly, it says there is 40.2 GB used (in the top-left) which conflicts with the information directly below it: "Capacity 108 GB, Used 103GB, Available 4.27 GB". Not so helpful.
    Disk Inventory X solved the problem, however. Much thanks! I wasted most of my weekend troubleshooting this sad issue. Anyway, Disk Inventory X revealed a bug where my external hard drive for photos was still appearing as a mounted volume, even though the HD was no longer connected. Freaky.
    After moving it to the trash and deleting it, I've recovered the space.
    Again, thanks! Contact me if you're curious about the details, as this might help you diagnose similar problems in the future.
    - Mike

  • Freeing space after deleting files

    Has anyone tried to free the LOB space after deleting a file? We've been using the aging feature but none of the space utilized by files that have been migrated to disk was freed after the file was moved to BFILE.

    Hi,
    there is old posting from you,
    Questions with Third-Party Access Management Systems
    I am trying integration of Oracle SSO and Oracle EBS but headers are not reaching in custom java file. Would be very thankful if you could help
    thanks in advance.
    prakash

  • Nas drive does not recalculating space after deleting files on Nas Drive??

    Greetings to Respected expert,
    Actually we have configure Window server 20082 Storage server.We have NAS drive configured which have 300GB quota limit. The actual data in the folder is 185 GB but it shows only 15 GB free and shows a warning .Please assist me why NAS server does not re-calculate
      the space after deleting files or does not leave space. Pardon me if I am not able to clear you my problems.this is very urgent for me.
    Thanks And Regards
    Rajnish Singh

    Hi Rajnish,
    As you mentioned "quota limit", it is set via FSRM or specific function on NAS?
    Meanwhile could you confirm the number 185GB is accurate? Sometimes a part of used space is just not calculated. You can confirm with checking the total space on NAS locally.
    If the number is correct and quota is set via FSRM, check if it is the Disk Quota which not re-calculated the released space. Try to clear the Quota setting and reconfig with 300GB limitation and see if issue still exists.
    If you have any feedback on our support, please send to [email protected]

Maybe you are looking for

  • Address Lookup option has disappeared

    hi all, my company recently moved to google mail and i am using a BB with curve 9300. all seems to be working fine except for 2 things. firstly when i go to compose an email on my BB and look for a company name in the address book i no long have the

  • Drag And Drop operations do not call custom IRM Protector

    We are developing our own custom IRM Protector,  So far we have successfuly integrated our IRM Protector into Sharepoint, and download operations and upload operations do protect and unprotect documents. Also move operations between libraries, throug

  • New Login Page/Authentication Method

    Hello Forum users, This weekend we have gone live with a new method of authentication in the NI Discussion Forums. This change is setting us up to successfully log users in to both Forums and Community simultaneously in the future. This change should

  • html:text tag

    Hi everybody, I am new to Struts concept. I am trying to develop astruts application. I am writing one textbox on that I want call one javascript function for onchange event my html:text tag looks like the following: <% int i=0; %>      <logic:iterat

  • Software keeps quitting for no reason

    Hi I wonder if anyone has any ideas about this, Adobe Illustrator (CS2 v) keeps quitting when I attempt to use certain tools. Occasionally Adbe Bridge just quits also. Is this a software issue or a Mac issue? It never seems to happen when I use photo