Disk, to Backup the disk connected (via USB) to Airport Extreme

Hi..
My 1.5TB disk (WD My Book Essential) is connected to Airport Extreme.
This disk contains photos, videos, etc. accessible/shared by some MacBook.
Now I need to back-up that disk, so probably I need 1 more disk as the backup disk, and the backup process can be scheduled.
Could someone please recommend me the solution. I am thinking of alternatives:
Alt-1. To have a NAS disk connected to the Airport Extreme via its ethernet port -- Is this a wise solution?
Alt-2. To split (using Hub) the USB from Airport Extreme into 2 hard disks (i.e. one disk is the existing 1.5TB disk for sharing files, while the other is one for the backup disk), and run the backup-process using Time Machine -- Is this a wise solution?
Thanks in advance.

Again, TM will not back up „airdisks“ (i.e. USB drives connected to the Extreme’s USB port or a NAS drive connected to one of the Extreme’s LAN ports). It will only back up drives that are connected directly to your Mac http://support.apple.com/kb/HT1733?viewlocale=en_US
The only option I can think of is to have the original drive hanging off your MacBook and another drive hooked to the Extreme (although this is not officially supported http://support.apple.com/kb/HT2038 , however, some have reported success going this route)
This would turn your lappy virtually into a desktop, though. I'm stuck with a similar set up until i get a mac mini to be my dedicated media server: 1 TB external FW drive holding my iTunes lib is connected to my MBP and backed up to my TC (along with my MBP's internal HD)

Similar Messages

Will Time Machine work with an external hard drive connected (via usb) to Airport Extreme?

Will Time Machine work with an external hard drive connected (via usb) to Airport Extreme?

Sorry, but this article is about 4 years old, and was printed based on preliminary information at the time.
The bottom line here is that Apple does not officially support Time Machine backups to a drive at the USB port of the AirPort Extreme.
If it works for you, great.
You might want to review the Apple Support documents below, which are far more recent than the article you reference:
http://docs.info.apple.com/article.html?path=Mac/10.6/en/15139.html
http://support.apple.com/kb/HT2038
It is supported.....
This is NOT correct. Please do not post false information on the forums.

Will a superdrive connected to USB on Airport Extreme be accessable via Wifi with a Macbook Pro Retina display?

I would like to connect 2 external drives to my Airport Extreme.
1. A standard USB 2.0 external hard drive. No issues.
2. An Apple Superdrive.
Will the superdrive work over Wifi with my Macbook Pro Retina display;
Or will it only work if connected to MBP via USB port on MBP?
Thanks

Welcome to Apple Communities
This port is for printers and external drives only

IPhone no longer connects via Airplay to Airport Extreme

Any device that was connected to my wifi was able to play music and video audio straight to my Airport Extreme. And then one day, it stopped. My iTunes on my computer connects to the Airport no problem, it's just the other devices. Yesterday, my friend connected with her iPhone but still not mine. She doesn't update any of her apps, ever. Is my iPhone simply to update to work with an older Express?? it's about four years old. Can someone help?

A simple first step is to reset your iPhone's network settings. Settings > General > Reset > Reset Network Settings. It will prompt for your passcode, and ask for confirmation. After that, you will need to connect to your wireless network again. No other settings will be altered.
If you still don't see an AirPlay icon, the gold standard for troubleshooting an Express is a "hard reset" (read below) after which you will need to reconfigure it. If you reset it, you might as well reset your iPhone's network settings again. Other devices may need to re-connect to your wireless network also.
To "hard reset" an AirPort Base Station: make sure it's powered up, then gently press and hold its tiny reset button. Don't apply any more force than required to feel a tactile click. Keep it depressed for five to ten seconds, long enough for its LED to flash amber rapidly. Release the reset button. Then, the LED will glow amber steadily for about a minute. Then, it will flash amber, slowly, about once every second or two, waiting for you to configure it with AirPort Utility.

Does the MX892 connect via USB cable

Even though this is a wireless printer, can I just leave the usb cable attached and by pass setting up a wireless system?
Solved!
Go to Solution.

Hi Zenjoo, thanks for posting! The PIXMA MX892 can be plugged into the computer via a standard USB printer cable, as well as be connected wirelessly. Please note that the printer does not come with a USB cable, you will be required to use the cable off your old printer, or supply your own. We hope this helps!

Can't connect to MacBook with Airport Extreme

I just swapped Airport Extreme base with new Airport Extreme 8012.N and now my Macbook can't connect to internet, keeps cutting out and dropping off. I have an iMac G5 connected via ethernet to Airport Extreme and Macbook in living room. It was working fine with old Airport Extreme router. I also have an Apple Express (not new 8012.N ) but it just blinks orange when plugged in. Any help would be appreciated.

You have to power down everything to start with. Make a clean slate so to speak.
I switched from an older Air Port Express to the new Extreme. Run the new software and when you power back up the new base station should show in the window. Follow the steps. It made me feel stupid the 1st time through and I had to do it again. You have to take your bent paperclip and reset.
After I got the new base station up and running I took the old Express and used it for Airtunes. At first it just blinked and wouldn't show up on the list of devices. I had to do the paperclip thing. And there it was! Green light! Follow the steps for Airtunes. Then I had to reconfigure my settings for my HP 3300 series wireless printer. That wasn't so bad, it all worked.
The machines all work well; we all just need pay close attention to the instructions.
I think that the Apple on line instructions could be a bit more clear. It all worked as it was supposed to but it was certainly a trial and error process.

How can I create a new folder in an external disk that is connected via USB to my Mac?

How can I create a new folder in an external disk that is connected via USB to my Mac?

Just like you would create a new folder anywhere. Open the drive's icon from your desktop or the Finder, and click shift-command-N. (Or use the Finder menu if you prefer - File - New Folder).
If you can't create a folder, your drive may be the wrong format (you can't write to a Windows/NTFS formatted drive, for example). You'll have to back up any files you have on there, and then use Disk Utility to reformat it to Mac Extended (if it will only be used on a Mac) or MS-DOS format (if you want to share it with a PC).
Matt

I have an imac i5 and have about 50 floppy disks I would love to read. I found a Sony 2x fdd floppy that connects via usb. When I connect it, nothing happens. Amy I just out of luck?

I have an imac i5 and have about 50 floppy disks I would love to read. I found a Sony 2x fdd floppy that connects via usb. When I connect it, nothing happens. The drive does not show on my monitor. Any suggestions or my I just out of luck?

Do you have Finder Preferences set to show other disks? Nothing wil show on the Desltop until you make that change:

Install Arch on hard disk connected via USB

Hi,
anyone tried this?
I had Arch Linux installed on hdd in my desktop, now I've connected this hdd to laptop via USB and I want to start system from it. I need to reinstall lilo, because I get kernel panic after booting from USB.
I don't know how to do this, I boot laptop from Archie Live CD and:
mount /dev/sda2 /mnt/m
chroot /mnt/m
editing /etc/lilo.conf
lilo
and I get error: Failed stat("/dev/dsa2")
Anyone know how to install lilo on hdd connected via USB?
thanks for any help

i know it's an old thread, but perhaps it'll help someone else later...
i first tried installing from cd, with some problems, using an arch 0.7 cd.
then i tried it with a newer one (arch 0.7.1) which did'nt recognize the external harddisk and my network device...
so i tried a ftp install from 0.7 cd - without problems.
then after trying to boot i got also this kernel panic, because the usb drive wasn't accessible like this.
with following steps i got it running:
boot from live cd (e.g. archie)
create a folder in /mnt/
mount usb drives partition with the installation there
chroot to mounted folder
edit /etc/mkinitrd.conf
configure it (usb,scsi,ide), there are useful comments in the file...
save it and run mkinitrd -auto
then edit and save /etc/lilo.conf as described in the wiki: http://wiki.archlinux.org/index.php/Initrd
installing lilo from the chrooted system doesn't work. so do this:
type exit (to leave chroot)
cd /
mv /etc/ /etcold/
mv /boot/ /bootold/
ln -s /mnt/yourmountfolder/boot
ln -s /mnt/yourmountfolder/etc
lilo
(if there's an other, easyer way to install lilo, let me know)
and then reboot...

HT201250 I have had my mac stolen, I have an external HD I connect via USB for these time machine backups, I now have a new replacement mac and wish to restore from my external HD, migration assistant doesn't seem to recognise or see my drive ? please hel

I have had my mac stolen, I have an external HD I connect via USB for these time machine backups, I now have a new replacement mac and wish to restore from my external HD, migration assistant doesn't seem to recognise or see my drive ? please help

See Pondini's Excellent information here...
Setting-up a new Mac from an old one, its backups, or a PC
See the Second Chance to Use Setup Assistant here...
http://Pondini.org/OSX/SetupLion.html

I have a canon mf5940dn, it is connected via USB to my macbook air, and yet, when i want to print smith, it says the printer is not connected. does anyone has any idea why? is there a guide to do it properly?

I have a canon printer mf5940dn, it is connected via USB to my macbook air, and yet, when I want to print smth, it says the printer is not connected. does anyone has any idea why? is there a guide to do it properly?

Hi,
I am currently replying to this as it shows in the iChat Community.
I have asked the Hosts to move it to Snow Leopard (you should not lose contact with it through any email links you get)
I also don't do Wirelss printing so I can't actaully help either.
10:01 PM Friday; July 29, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Iphone 4S - Windows Vista - 64 Bit (and photoshop elements 9.0) is not recognizing my iphone as a camera - therefore I cannot download pictures from my iphone. iTunes works fine with the iPhone, but I do not see it in "My Computer" when connected via USB

iphone 4S - Windows Vista - 64 Bit (and photoshop elements 9.0) is not recognizing my iphone as a camera - therefore I cannot download pictures from my iphone. iTunes works fine with the iPhone, but I do not see it in "My Computer" when connected via USB. I already tried uninstalling and reinstalling iTunes....still nothing. Any ideas?

Thank u verrrrrrrrrrry much FoxFifth u save my life thank u.

I was using a ps3 controller connected via usb as a gamepad when I had Snow Leopard installed - the other day I downloaded Mavericks and now it no longer works. Solutions?

I moved from 10.6.8 (Snow Leopard) to 10.9 (Mavericks). Apple support won't help because it's not their hardware. It's not a playstation controller, it's Spartan brand, and it never connected via bluetooth (it continues to not connect via bluetooth in Mavericks which is fine). I always just plugged it in and it ran because apparently Apple included drivers for it from Snow Leopard onward. However, in Mavericks that's not the case, as when I plug it in nothing picks it up, and when I tried to connect it via bluetooth I would enter the pairing code and then it wouldn't pair. Anyone got any thoughts/ideas?

Thanks for no help. Such a supportive community. I figured it out on my own. I can only connect it via usb cable (which I'm happy with) and in order to do that I had to go through the bluetooth connection steps for some reason. It doesn't show up as paired but I did the steps outlined in this video - http://www.youtube.com/watch?v=Efk77f6d98Y -, plugged the controller in via usb cable and then it worked.

I have a Canon LBP5360 laser printer connected via USB cable to my MacPro running 10.6.8 I have downloaded the latest UFR2 divers. I am trying to connect to the printer but the printer is not showing appearing in Print

I have a Canon LBP5360 laser printer connected via USB cable to my MacPro running 10.6.8
I have downloaded the latest UFR II driver. (UK Version)
I am trying to connect to the printer but the printer is not appearing in my Print/Fax Preferences.
When I click the box "More Printers" under the Default printer the drop down box gives me a heading "Canon IPv6 (UFRII) with the option to add or cancel. (The add is highlighted). But there are no printers showing in the box. Nothing. Can anyone help?
Is there a problem with my Mac setup or maybe a setting in my printer?

Mac UFR II Printmonitor
UFR II Printmonitor is application software that interfaces with the software for the printer, and is installed with the printer driver. You can start UFR II Printmonitor in the following folder to check the printer status, and errors. Refer to the Help how to use the Print Monitor.
MF3010, MF8000 Series, MF8000C Series, MF8300 Series, MF8300C Series:
Print Monitor: [Library] - [Printers] - [Canon] - [CUPSCMFP] - [Utilities]
Other Printers:
Print Monitor: [Library] - [Printers] - [Canon] - [UFR2] - [Utilities]

My external drive won't mount. Disk Utility says it can't repair disk and to backup the disk and reformat, but how can I do that if it won't mount?

My external drive won't mount. Disk Utility says it can't repair disk and to backup the disk and reformat, but how can I do that if it won't mount?

See mount section in 1st linked article.
Disk Unmount Using Terminal
Disk Utility – Force Mount Disk

Disk, to Backup the disk connected (via USB) to Airport Extreme

Similar Messages

Maybe you are looking for