Disk Utilities says: Reformat your Macbook hard drive and restore. How?

I am using Time Machine which is making accurate backups of my silver Sept 2008 Macbook.
Now trying to find an approved step-by-step process to:
1. Reformat my disc.
2. Reinstall Snow Leopard
3. Reinstall my Boot Camp partition
4. Reinstall my Macbook from Time Machine + MobileMe + iPad + portable hard drive.
NOTE: I can't find my original iLife discs. I am stuck in sunny Dubai, so there is no intelligent Mac store nearby.
Is there a location that shows this? For 24 hours I have been reading posts but none take you thru on a step by step basis. Surely the manufacturer has a page which displays this?
Thanks, in breathless anticipation, James.

1. Reformat my disc.
o Insert the Snow Leopard DVD and double-click the Install Mac OS X icon. A window appears with two choices: Utilities and Continue. Click Utilities.
o You now have two other choices: Go Back and Restart. Click Restart.
o After a few minutes, the installer will display the “Install Mac OS X” screen.
o Choose Utilities > Disk Utility.
o In the list on the left, select the volume you want to erase.
o Click the Erase button near the top of the window to display erase options.
o Make sure Volume Format is set to Mac OS Extended (Journaled) and click Erase.
o In the confirmation dialog, click Erase again. Disk Utility erases the disk, which takes just a few seconds.
o Choose Disk Utility > Quit Disk Utility. You should find yourself back on the “Install Mac OS X” screen.
2. Reinstall Snow Leopard
o On the “Install Mac OS X” screen, click Continue.
o The Software License Agreement appears. Click Agree to proceed with the installation.
o Select the volume you just erased.
o You will now have the opportunity to modify your selections of optional software.
o Click Install.
3. Reinstall my Boot Camp partition
Check out this Apple Support document: Boot Camp
Installation & Setup Guide
4. Reinstall my Macbook from Time Machine + MobileMe + iPad + portable hard drive.
o Make sure the Time Capsule is attached to your Mac to help expedite the restore.
o Insert your Mac OS X Install DVD and insert it in your MacBook’s optical drive.
o. Restart your MacBook. Immediately after you hear the startup chime, press and hold the C key until you see the gray Apple logo on the screen.
o. Click through the language selection screen.
o Choose Utilities > Restore System from Backup and click Continue.
o Select your Time Machine backup volume and click Continue again.
o If the Time Machine disk contains backups for more than one Mac, select the one you want from the Restore From pop-up menu. Then select the particular backup you want to restore. Click Continue.
o On the Select a Destination screen, select your MacBook's internal disk. Click Restore.
Time Machine should restore your data. When it finishes, follow the instructions to restart your computer.

Similar Messages

  • How do i reformat imac hard drive and restore time machine backup?

    How do I reformat my iMac internal hard drive and restore from a Time Machine backup?
    I have an iMac 20" Mid 2007 with a problematic hard drive.
    IntelCore 2 Duo, Processor speed 2 Ghz
    800 Mhz Bus speed
    4 GB RAM
    250 GB Western Digital Hard Drive
    10.6.3
    Was getting a question mark upon booting up, so I booted from a 10.6.3 Snow Leopard CD and ran disk utility. Repair disk was interrupted with an error message. 'Disk utility can't repair disk. Backup files, reformat disk and restore backed up files.'
    1. Should I select Erase, Mac OS Extended Journaled, Erase?
    2. If I do this, won't I lose my networkability, and therefore lose access to Time Machine backups?
    3. If it were you, would you go ahead and replace the hard drive? Not sure I should trust this hard drive!
    4. If I need to replace the hard drive, can you send instructions?
    Thanks!

    Clean Install of Snow Leopard
         1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
             with your computer.  Insert the disc into the optical drive and restart the computer.
             After the chime press and hold down the  "C" key.  Release the key when you see
             a small spinning gear appear below the dark gray Apple logo.
         2. After the installer loads select your language and click on the Continue
             button. When the menu bar appears select Disk Utility from the Utilities menu.
             After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
             size.)  Click on the Partition tab in the DU main window.  Set the number of
             partitions to one (1) from the Partitions drop down menu, click on Options button
             and select GUID, click on OK, then set the format type to MacOS Extended
             (Journaled, if supported), then click on the Apply button.
         3. When the formatting has completed quit DU and return to the installer.  Proceed
             with the OS X installation and follow the directions included with the installer.
         4. When the installation has completed your computer will Restart into the Setup
             Assistant. Be sure you configure your initial admin account with the exact same
             username and password that you used on your old drive. After you finish Setup
             Assistant will complete the installation after which you will be running a fresh
             install of OS X.  You can now begin the update process by opening Software
             Update and installing all recommended updates to bring your installation current.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.
    If you have your Time Machine backup drive connected, then you can use Setup Assistant to migrate your Home folder, application support files, and third-party applications and system preference files. I recommend doing this via the Setup Assistant when the option appears.

  • If I upgraded my MacBook Pro from Snow Leopard to Lion via the web and now wish to erase the hard drive and restore it to factory settings to sell.  How do I accomplish this?

    I upgraded the operating system on my MacBook Pro from Snow Leopard to Lion via the web.  Now I need to erase the hard drive and restore it to factory settings, so that I can pass it on.  How do I accomplish this?  When I insert the Mac OS X install disk, the only option is to erase the free space.  Any insight would be appreciated.
    Thank you

    You need to boot off the original Snow Leopard DVD's that came with the system.
    Once you are running off of the DVD you will be able to do a clean install of SL
    To boot off the DVD with the system up running Lion insert the DVD. Open Sytem Preferences->Startup Disk and select the DVD then restart the machine.
    Message was edited by: Frank Caggiano

  • I just replaced my hard drive and restored everything from Time machine. However, I am unable to open iphoto and the following message appears Your photo library was not found. Do you want to find your iPhoto Library?

    I just replaced my hard drive and restored everything from Time machine. However, I am unable to open iphoto and the following message appears Your photo library was not found. Do you want to find your iPhoto Library?
    Where do I find this library?
    thanks
    Shak

    Twas quite a hassle if I am honest which was eventually resolved but I don't feel qualified to help anyone through the process as it required a trip to my local apple store and a genius bar appointment.
    Personally, I would do anything like moving pictures out of folders etc. Certainly not creating a new users. i don't think that is an elegant solution
    Try the following which MAY just about rescue the situation for you but if they don't work you may have to do something more drastic.
    (1) Holding down Cmd & Alt at the same time, start iPhoto by clicking on the iPhoto icon. From the resulting menu choose Rebuild photo library by selecting all available options given to you and then pressing REBUILD!
    If that doesn't work
    (2) Fire up Utilities. Go to migration assistant. Chose 'From another Time machine back-up'. Open the 'Users' option that comes up next and from there select Pictures, then uncheck everything else like Applications etc (you don't want to do a full migration of everything) and click go.
    If that doesn't work, take a deep breath and this step is rather complicated but it worked for me. First of all close iPhoto! Then go to new Finder window.
    From the Finder window choose Pictures, then iPhoto library, press CMD and the letter i. It brings up a new window. Go to Sharing & permissions. From there select the padlock to unlock settings. and then select User account, then press the 'cog' icon next to +/- abd choose Apply to enclosed items.
    This may take a while. Once completed, re-open iPhoto.
    And that should (I stress should) cure it.
    Good luck.

  • How can I wipe my hard drive and restore to factory settings without the use of the original OS CD?

    I have a 2010 MacBook and I need to wipe the hard drive and restore to factory settings.
    The problem is that even though I have the original disc, the CD drive has stopped functioning and will reject any disc put into it.
    Therefore, is there another method to do this without the CD?

    Not very easily.  To restore to factory software you need the original installation DVD (CDs).
    If you have another Mac which is the same make and model so that those installation DVD (CDs) would work, you can use a Firewire cable between the 2 Macs and then put your Mac to be reset into Target mode and use the other Mac to install the software.  However I suspect that is unlikely.

  • I just replaced my hard drive and restored everything from Time machine. However, my itunes is empty.  No music, movies etc are there.  Please help thanks

    I just replaced my hard drive and restored everything from Time machine. However, my itunes is empty.  No music, movies etc are there.  Please help thanks

    Empty/corrupt library after upgrade/crash
    Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
    Windows images, but you get the point. Depending on the age of your library the library file might not include the .itl extention. Make it match the file you are replacing.
    See MusicFolder Files Not Added and Super Remove Dead Tracks for tools to catch up with any changes since the backup file was created.
    tt2

  • How do I back up my itunes to an external hard drive and restore from same if necessary

    How do I back up my entire itunes to an external hard drive and restore from same if necessary.
    Thanks

    This is where iTunes stores backups for different operating systems: http://support.apple.com/kb/HT4946
    I do not use a Windows machine, have a Windows Vista Dell I rarely startup now.  But, from what I remember with Win boxes is, you will have to create on the external hard drive a file system like that one iTunes normally uses, and then in the iTunes preferences or control panel edit the location for the storage to specify the name of the external hard drive, or its letter code, with the name of that file system you created on the exernal drive.
    I would also move all of the files from the internal file system to the external since you have now told iTunes that is where they are...before deleting from the internal drive, test iTunes to see that it goes where you want it to go.

  • Need to reformat hard drive and restore Time Machine backup. What's the safest way to proceed?

    I have a Mac desktop, purchased in 2007. We upgraded last year to Snow Leopard. It has been slow for a few days, and yesterday wouldn't go past the gray screen. Tried booting in recovery with no success, same for safe mode. Even tried fsck -fy. Eventually went to the Snow Leopard install disk and tried to repair disk, but got an "Disk Utility can't repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files" message. I've got Time Machine back ups on an external hard drive, but I want to make sure I do this right and don't make things worse. What steps do I need to take?

    In most of the cases, that Disk Utility message means that the hard drive is damaged.
    However, you can try to erase the disk and restore the Time Machine backup to see if it works. Follow these steps:
    1. Insert the Snow Leopard DVD and press the C key while your Mac is starting.
    2. Go to Utilities menu > Disk Utility, select Macintosh HD on the sidebar, go to Erase tab and erase the disk. If there's an error during this step, take the Mac to an Apple Store to get a new hard drive.
    3. Close Disk Utility, go to Utilities menu, choose the option to restore a Time Machine backup and follow the steps.
    If the computer is slow after doing this, take the Mac to an Apple Store as soon as you can

  • MacBook hard drive and SATA hard drive

    Can I use the Hitachi’s Travelstar 5K160 HTS541616J9SA00 2.5-inch SATA hard drive to, instead of putting their drive in the enclosure (it doesn’t come pre-installed), put my MAC Book (black model) hard drive in? I want to transfer the data from this hard drive into another MAC Book. My original computer had a problem with the board but I have my hard drive with data intact. I want to buy this SATA but am not sure if this would work, if I can put in the MacBook hard drive as if it was the SATA one... Help, anyone? Thanks!
    MacBook   Mac OS X (10.4.10)  

    Hi there,
    A number of people on NewEgg's product page for that drive say it's great for a MacBook, so I'd assume it's ok.
    You can put your old MacBook hard drive into any external USB2.0 enclosure and retrieve the data.
    Regards!

  • MacBook Hard Drive And iTunes

    Hi, I want to purchase a Black MacBook but the internal hard drive is not large enough. I wanted to purchase a Maxtor 300gb Network Hard Drive. I would be storing iTunes videos on it. How would the videos show up in iTunes and how could I download new videos to the external hard drive? Thanks

    Yes you will have to mount the network drive each time (although I believe you can have it set to automatically mount). iTunes will not need its preferences set each time. If the source of your tracks is not available it will only complain once you try to play each individual track.
    Yes, assuming the FireWire drive is already on and connected, when you turn on your MacBook the drive data will be immediately available to FrontRow.
    Assuming you are intending to leave both a network drive and a FireWire/USB2 drive (whichever you buy) on 24/7 you will have less issues with a FireWire/USB2 drive.

  • '09 MacBook Pro won't start up after installing new hard drive and restoring from an external hard drive.

    I am in the process of replacing my hard drive and have run into a problem. I reinstalled OSX 10.6.3 using a DVD I bought off Amazon. That went well and I then restored my hard drive using an external and Time Machine.
    After that, things still looked good but I couldn't log in to my user (and access my MacBook) because my password wasn't working even though my hint was correct. Yes, I am POSITIVE my password was correct; I even tried a couple other passwords to humor myself. I then gave up and decided to restart the computer.
    Now my MacBook won't start up at all. It goes o a gray screen with a still loading symbol for a couple minutes and then goes to a solid light blue screen. I've tried starting up while holding command+R and I tied holding just command and neither worked.
    Did I install the wrong OSX because I didn't use the same DVD that came with the laptop? Is there something wrong with my hard drive already?
    Please help =[

    You probably bought the wrong RAM that has different pin assignments, so it won't fit in the slot. Return it.
    I bought 4GB Memory online for my MacBook, so I could get it to run twice as fast.
    Doubling the memory does not make your computer run twice as fast.

  • Upgrade MacBook - Hard Drive and RAM

    I want to upgrade my daughter's early 2008 white MacBook - both internal drive and RAM.  I know how to install both and have done so before.  I have purchased the internal drive, the RAM and a large external drive for Time Machine backups now and for the future.  I also want to install Lion.  I'm not sure of the sequence...  Here is what I propose:
    1) format the new external hard drive and then back up the current internal drive using Time Machine.
    2) install the new RAM.
    3) install the new internal drive.
    4) boot up using Snow Leopard DVD.  Install OS 10.6
    5) upgrade to 10.6.8
    6) install Lion.
    7) import all of her applications, files, etc. from the Time Machine backup.
    8) done?
    Is this correct - will all work?
    9) back up the new internal drive using Time Machine.
    Will step #9 work when I select "Back Up Now" from the Time Machine?
    10) If yes, is her itunes account, etc. ready to use?  Can she sync iphone as before? 
    Thanks.

    I can make this easier for you:
    1) Download and install SuperDuper.
    2) Using SuperDuper, make a clone of the current internal drive to the large external.
    3) Test the clone by booting to the external drive
    4) If good, install the new internal drive.
    5) Boot from external, and use SuperDuper in reverse (clone back to new internal).
    6) When done, boot the mac normally.  Upgrade to Lion, and all should be good.

  • Time machine will not backup to empty external hard drive after replacing Mac's internal hard drive and restoring

    First - I live in a tiny fishing village in Belize, so getting support here is virtually non-existent. There is no one else in my village who even uses a Mac. Recently, my hard drive in my 2012 Macbook Pro 13" went bad (said it suffered a "shock"?) and I was traveling to Cozumel, Mexico, so had it replaced there. We used an external hard drive backup to restore the data to it's last time machine backup (October of 2014). Everything was working fine, until I returned home, added some pictures, and wanted to do a fresh backup. Now, time machine will start the backup, but gets about 113,000 of 181,000 done, and it locks up. I can do nothing - everything freezes, and I have to eventually power down the computer. I even tried deleting the old backup from the external hard drive, erasing it completely, and reformatting the external hard drive using disk utility. Still locking up. It is a 5 GB external hard drive, so space shouldn't be an issue, and it was backed up to the same external hard drive previously with no issues. I'm still running Mavericks, and don't want to try to upgrade to Yosemite until I can be sure I have a backup of my old data and pictures. I am a writer, and use that to make my meager living LOL
    I'm stumped. I've looked through the files endlessly but can't find anything similar to my issue. Any suggestions? I know just enough to be dangerous, and don't want to lose everything we worked so hard to retrieve when my hard drive crashed last month.
    Thanks!

    SMH5206 - I tried letting it sit and crank overnight twice. First time I thought it was my error causing it to lock up. Now I know better. I haven't changed any of my time machine settings - and actually never used time machine regularly. Only reason I had a fresh backup from last Oct was because I did one before I upgraded to mavericks. Everything worked fine then - and we used that to restore when the hard drive crashed and was replaced. I have actually deleted hundreds of pictures off my hard drive and one entire user, so it should actually be a much smaller backup - so if it did it before on the same external hard disk, I don't understand why it won't now.  I'm really confused.
    Kahjot - the external hard drive is the same one I backed up to previously - and I have completely erased it and reformatted, and the information I'm backing up now is less, so there should be no reason why it doesn't have enough room now, when there is actually less information on my current hard drive (see my reply to SMH5206). When I plug it in, it says it is a 500.07 GB WD "My Passport"
    I've even tried to have time machine only backup certain files, and not the whole thing. Still locking up.
    I'm sure it's my error somewhere, - I just don't know how or where

  • How do I replace a failed hard drive and restore with time machine

    My hard drive died on my 2009 MacBook Pro. I regularly backed up my data using Time Machine. How do I format the drive and restore fom my USB TimeMachine drive.

    If you haven't made a Lion or Mt Lion install USB thumb drive or used the Recovery Disk assistant to make a USB thumb of the Recovery HD then you will need to boot the system from the original OS Install disk that came with the system or a Snow Leopard disk you bought to upgrade to Snow Leopard. Then use the option to restore from TM backup.
    Or if you have made  New backup since install Lion or Mt Lion then that Tm backup may have a copy of the Recovery HD on it. Only way to tell is connect your TM backup drive and when starting the system hold down the Option key and see if you get a link that says Recovery HD.

  • Backing up images on external hard drive and restoring to new internal driv

    I recently purchased a new external hard drive and a new internal hard drive. Before installing the new internal drive, I backed up the old internal drive on the external drive. Then I installed the new internal drive to my Macbook Pro. However, when I tried to access and print my Aperture images on the new internal drive, I received an error message saying "versions with unavailable master images cannot be printed." I clicked on 'show referenced files," but couldn't determine how to recover my master images. I checked the forum and under "referenced files go offline after restore from a backup" it said to go to "File>manage referenced files" but nothing else. How can I recover my master images? Please help - I have nearly 6000 images that are lost without recovering the master images. And no, I was ultra stupid in not placing everything in a vault = but I'm relatively new to Mac OS and thought a backup would be sufficient. Thank!

    The volume name of the new hard drive needs to be the same as the old hard drive - rename it if you have to - then they should be fine.
    If you cannot seem to make this work then you will have to reconnect them with locate referenced files under the file menu. Select all the files that are disconnected before going into the dialog.
    RB

Maybe you are looking for