Disk Utility 10.5.1 on AGP and MacBook Pro intel
I started up Disk Utility on my AGP, it showed "estimated 1 minute", After about 30 minutes the scan was still said "estimated 1 minute" and the blue bar had not moved. So I hit the red button to close/quit and then the window came to life and showed the scan detail and the blue bar started moving. Of course I canceled the quit and the Disk Utility completed the job. Estimated times for repair are not even close on the AGP, Results listed below.
On my MacBook Pro, the Disk Utility was fast and no problems,
Both machines gave the exact warnings and errors. see report:
Repairing permissions for “The System”
Warning: SUID file "usr/libexec/load_hdi" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/Resources /DiskManagementTool" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Reso urces/Locum" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Install.framework/Versions/A/Resources/runner " has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/readconf ig" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/writecon fig" has been modified and will not be repaired.
Warning: SUID file "usr/libexec/authopen" has been modified and will not be repaired.
Warning: SUID file "System/Library/CoreServices/Finder.app/Contents/Resources/OwnerGroupTool" has been modified and will not be repaired.
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
Permissions repair complete
Good Morning,
Honestly this is a known issue. Disk Utility is acting really "Odd™" under Leopard when it comes to time and speed.
I'm sure it will be corrected with either a hotfix or in 10.5.2.
Hope this helps!
David
Similar Messages
-
Difference in quality of iSight on Macbook Pro C2D and Macbook Pro Intel
Hi there
I currently have a MacBook Pro Intel 2.16mhz 17" laptop and I just bought a new MacBook Pro 2.33 C2D laptop. I have noticed that the picture quality of the built in iSight camera of the standard Dual Core is much better than on my new C2D version. The new C2D version seems to have more 'noise' over the whole picture than my standard Dual Core. Does anyone know why this should be?
Many thanks in advance
Dan
MacBook Pro 17" Intel & Macbook Pro 17" C2D Mac OS X (10.4.8)I have just bought my C2D 15,4" 2,16Ghz model and iSight has a very good quality. Compared to the CD model I don't see any difference
-
Disk Utility wont erase SD card on my Macbook Pro
Im trying to erase an SD card on my Macbook Pro OS X (10.6.8) through disk utility. When I select the SD card in the left window, then after selecting the erase tab next to first aid, raid and restore, at the bottom of erase, all 3 tabs : erase free space, security options and erase are grey and unavailable. All i want to do is format my sd card. What do i need to do?
Thanks,
tellparksyHi,
zezzerinsnow wrote:
And its just more for understanding, than a reel problem. If I chose "Annuller", the finder window dos not close down.
Because "Annuller" is the localized name of the cancel button.
The normal behavior of the cancel button is immediately leave the script.
The solution is to use another word
on run {input, parameters}
-- åbner mappen
tell application "Finder" to open "32 GB Kingston:Overførelse til harddisk"
--undersøger og fordeler
--beder om bekræftelse på at filer må slettes
set question to display dialog "Vil du slette filerne?" buttons {"Annullere", "Slet filer"}
set answer to button returned of question
if answer is equal to "Annullere" then
tell application "Finder" to close front window
else -- the answer is equal to "Slet filer"
tell application "Finder"
delete (every item of folder "Overførelse til harddisk" of disk "32 GB Kingston")
close front window
end tell
--bekræfter at filerne er overflyttet
display dialog "Filerne er overflyttet" buttons {"Ok"}
end if
return input
end run
or a try block
try
set answer to button returned of (display dialog "Vil du slette filerne?" buttons {"Annuller", "Slet filer"})
on error --cancel
set answer to "Annuller"
end try -
Dvcpro hd and Macbook pro intel duo core
Hello friends, I have MBP 15" duo core 2ghz ,2gb ram, can i edit dvcpro hd material in fcp studio. i mean will my MBP be able to take the load i plan to use express card, e-sata drives, or do i have to transcode it to dv format. it will be only 1 layer track.
If you use a e-sata express card with a external e-sata HD, then you will have enough performance. A e-sata drive will be just as fast as your internal drive.
Maybe if you have a nice 3.5 inch e-sata HD you will have better performace then the internal 2.5 inch laptop HD. -
when i did all that shows up in disk utility now is something called expansion and all my opitions are greyed out in the partation tab, it doesnt mount and idk what to do please help.
Running macbook pro 2.53ghz late 2010
mountain lion
8gbs memI would try it on a PC and see if you can format it, then put it back on the Mac and try again. If it's not seen on a PC, then there's the strong likelihood that there's a hardware issue; either the bridge/chip set or the HD itself is dying/dead. There's also the small possibility that the cable is faulty, so I'd try a different cable too.
-
applications on my Macbook Pro 10.8.5 (8 GB) hang frequently. Disk Utility keeps repairing iTunes, system libraries and applications, but the next time I start my notebook, again applications hang. What do I do? Itunes, Preview window, Microsoft Office 11 are the programs with most frequent hangs.
HI again. installed and then uninstalled both Mackeeper and Blackberry with their software. Etrecheck still shows the same 'failed to load' error. Pasted below. Could you pls advise what is still going wrong? What am I missing? I donot seem to understand the detailed procedure of home/library etc for checking complete removal of clean my mac. Sorry to bother you and thank you a million times for your assistance!
Hardware Information:
MacBook Pro (13-inch, Mid 2012)
MacBook Pro - model: MacBookPro9,2
1 2.9 GHz Intel Core i7 CPU: 2 cores
8 GB RAM
Video Information:
Intel HD Graphics 4000 - VRAM: 512 MB
Startup Items:
GT Network Tuning - Path: /System/Library/StartupItems/GT Network Tuning
NMPCCardDaemonVMC - Path: /System/Library/StartupItems/NMPCCardDaemonVMC
NMPPPMonitor - Path: /System/Library/StartupItems/NMPPPMonitor
Freecorder - Path: /Library/StartupItems/Freecorder
HWNetMgr - Path: /Library/StartupItems/HWNetMgr
System Software:
OS X 10.8.5 (12F45) - Uptime: 0 days 0:9:7
Disk Information:
APPLE HDD HTS547575A9E384 disk0 : (750.16 GB)
disk0s1 (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) /: 749.3 GB (225.09 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-8A8
USB Information:
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Apple Inc. Apple Internal Keyboard / Trackpad
FireWire Information:
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Kernel Extensions:
com.rim.driver.BlackBerryUSBDriverInt (0.0.97)
com.rim.driver.BlackBerryVirtualPrivateNetwork (1.0.15)
com.silex.driver.sxuptp (1.5.1)
Problem System Launch Daemons:
[loaded] BkBackupScheduler.plist
Problem System Launch Agents:
Launch Daemons:
[loaded] com.adobe.fpsaud.plist
[not loaded] com.Affinegy.InstaLANd.plist
[loaded] com.intego.BackupAssistant.daemon.plist
[loaded] com.microsoft.office.licensing.helper.plist
[loaded] com.oracle.java.JavaUpdateHelper.plist
[loaded] com.rim.BBDaemon.plist
[not loaded] com.rim.nkehelper.plist
[loaded] com.rim.tunmgr.plist
[loaded] org.macosforge.xquartz.privileged_startx.plist
Launch Agents:
[failed] cn.com.zte.usbswapper.plist
[loaded] com.Affinegy.InstaLANa.plist
[loaded] com.intego.backupassistant.agent.plist
[loaded] com.rim.BBLaunchAgent.plist
[loaded] com.rim.blackberrylink.BlackBerry-Link-Helper-Agent.plist
[loaded] com.rim.PeerManager.plist
[not loaded] de.novamedia.NovamediaDiskSupressor.plist
[loaded] org.macosforge.xquartz.startx.plist
User Launch Agents:
[loaded] com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
[loaded] com.google.GoogleContactSyncAgent.plist
[loaded] com.google.keystone.agent.plist
[loaded] com.macpaw.CleanMyMac.helperTool.plist
[loaded] com.macpaw.CleanMyMac.trashSizeWatcher.plist
[loaded] com.macpaw.CleanMyMac.volumeWatcher.plist
User Login Items:
None
3rd Party Preference Panes:
Flash Player
FUSE for OS X (OSXFUSE)
Growl
Java
Internet Plug-ins:
AdobePDFViewer.plugin
AdobePDFViewerNPAPI.plugin
Flash Player.plugin
FlashPlayer-10.6.plugin
iPhotoPhotocast.plugin
JavaAppletPlugin.plugin
OfficeLiveBrowserPlugin.plugin
QuickTime Plugin.plugin
RL Secure Plug-In Layer.plugin
SharePointBrowserPlugin.plugin
Silverlight.plugin
User Internet Plug-ins:
ContentManager.plugin
RocketEngine.plugin
UploadManager.plugin
Bad Fonts:
None
Top Processes by CPU:
2% hidd
2% Safari
1% EtreCheck
1% fontd
1% PluginProcess
1% WindowServer
0% WebProcess
0% PeerManager
0% BBLaunchAgent
0% mDNSResponder
Top Processes by Memory:
147 MB WebProcess
139 MB Safari
66 MB mds
57 MB com.apple.dock.extra
57 MB CalendarAgent
49 MB Dock
41 MB BlackBerry-Link-Helper-Agent
41 MB Finder
41 MB WindowServer
33 MB PluginProcess
Virtual Memory Statistics
5.69 GB Free RAM
1015 MB Active RAM
125 MB Inactive RAM
1.20 GB Wired RAM
244 MB Page-ins
0 B Page-outs -
My Time machine won't back up. Recently updated to OS x 10.7.5. Error message is as follows: "The backup disk image “/Volumes/Time Machine Backup/Scott’s MacBook Pro.sparsebundle” is already in use." What is wrong and how do I fix it? Thanks.
Have you tried restarting the computer? Also, see Time Machine Error from this pages sidebar under More Like This.
-
Start up Disk full and MacBook Pro won't reboot. Only white screen but can sleep, restart, shut down.
Reboot into Safe Mode (hold the shift key down at the sound of the chime, release when the progress bar appears) Safe Mode will take longer to boot than normal.
-
I purchased snow leopard from online macstore in Australia and got a disk with OSX 10.6.3 but my macbook with intel processor and 1 gig won't update from 10.5.8. It restarts but doesn't update after disk installs. Do I need 10.6.0 to install first?
Insert the Snow Leopard DVD, restart your MacBook while holding down the C key, this should start your Mac from the optical drive instead of your hard drive. Choose your language and install Snow Leopard. When it's done and you've restarted on your new 10.6.3 system run software update to upgrade to 10.6.8. Done.
-
AEBS, TimeMachine and Macbook Pro
Ok guys, this is hard to describe but I will give it my best. Please bear with me.
Since about April, my airport and macbook pro (08 model) simply wouldnt work properly.
Took the airport to the apple service centre, and he simply replaced the airport for me
All problems solved, until tonight. The exact problem came back.
All firmware/software is up to date.
Its like this. Everything will work great for ages and then my timemachine airdisk will simply dissappear with resulting errors - cannot find disk etc. <-Annoying.
The mac connects to the airport extreme over wireless N only (5ghz) on startup, SOMETIMES. Other times the AEBS will simply not appear in the wireless network list. If I connect to my wireless modem (billion 7401vgp), the airport is suddenly in the list inside Airport Utility. I can open the advanced config etc and change settings. The aebs is not frozen. The light is green on the base itself and in airport utility.
Sometime later, it will come back to the wireless network list, and all is good, except for the airdisk.
Other times, all will work fine the moment i get home, and then randomly and suddenly, the AEBS will lose the net, and a few moments later, will disconnect and the mac will fall back and connect to the wireless modem, which is good for the net, but i bought an AEBS for the wireless N speeds (around 270-290mbit most of the time)
Obviously the first base station was not the problem. I have tried anything and everything but cannot force faults to replicate. iStumbler shows this is the only 5gig network in the area, and only sometimes can see 2-3 other 2.4gig networks.
Any and all help greatly appreciated.
/rantSee page 33 of the Motorola SURFboard SB4220 User Guide for multiple users setup with this modem. By default, the device connected to either the USB or Ethernet port will get it's IP address from the modem's DHCP server. In turn, when you connect the AEBSn to the modem's Ethernet port, it would get one of these addresses; however, the AEBSn providing NAT & DHCP services itself, will create another subnet of IP address to devices connected to it.
To allow all devices to be on the same subnet, just connect the PC, via Ethernet or wirelessly, to the AEBSn instead of it's USB connection to the modem. -
Techtool Deluxe and MacBook Pro
I see this message on the Apple Techtool download site:
Note: The Mac Pro (Early 2008), MacBook (Early 2008) and MacBook Pro (Early 2008) are not fully compatible with this version of TechTool Deluxe. The MacBook Air is fully compatible with this version of TechTool Deluxe when used with the MacBook Air SuperDrive. Please check back later for a new version of TechTool Deluxe.
Since it is not listed what exactly this means, is it still safe to use??
Message was edited by: powerbook1701There is always an extended delay in the updating of TechTools Deluxe for new Macs, powerbook1701. If you have a Mac that it is not shown as compatible DO NOT use TTD on it. In the past this has caused some serious problems. Out of date disk utilities generally can do a lot of harm to directory structures and the like.
You should NEVER use an old version of TTD or TTP or DiskWarrior, or Drive Genius, or even Apple's own Disk Utility, on a new computer unless the manufacturer specifically endorses it for your model and OS version
(An "Early MBP17", like the one that jw2 says he has, is a very different computer to yours. The fact that he has used it with no problems is not relevant to your situation.)
Cheers
Rod -
I have a iMac Desktop and MacBook Pro laptop. I generate my work related files on both of these machines. After a few days or weeks, I have new files on some folders on either of the machines that is not on the other machine. What is the best way to keep the files in these machines synchronized?
How did you transfer the files to the iMac. If you exported the files out of the MB library using Kind = Current you should get the edited version. Any other option may not.
If you want to keep the two libraries "synced" any photos you want to move to the iMac should be added to an album, connect the two Mac with a LAN, Target Disk Mode, Transferring files between two computers using FireWire, with WiFi. and use the paid version of iPhoto Library Manager to copy that album from the MB library to iMac library. It will also copy the original and edited versions, keywords, titles, etc.
OT -
Can't Connect MacBook and MacBook Pro at same time to AEBS
I can't connect a MacBook and MacBook Pro to an Airport Extreme Base Station at the same time. Whichever one connects first works and the other one doesn't. It was working fine for months and then stopped working. Can only use one computer at at time. There's nothing else on the network. It may have been a software update that caused the problem, but I'm not sure which one. Have done all software updates and am not using any security on the network, so that's not the problem. Many sleepless nights trying to get this fixed, so any help would be greatly appreciated!
bcassid
Do me a favor. So many users are experiencing this (no myself though) and I have suggested so many things with nothing constantly working. There are successes here and there, but nothing consistently solves the problem. However, try the following in Airport Utility and both Macs, and then let us know what happens.
*Can’t Access Certain Web Sites / DNS Server Settings Issues*
I'm wondering if either or both Airport Utility & Network Prefs have proper DNS server settings. Try this
Launch Airport Utility.
Select TC on left.
Click "Manual Setup".
Select "Internet" from the toolbar above.
What's listed for "DNS Server(s):"?
Try putting in these servers from OpenDNS
208.67.222.222
208.67.220.220
Click "Update".
Your TC will restart with the new settings.
Next, launch System Prefs --> Network Prefs.
Select the service you usually connect with on the left (Airport or Ethernet).
Then click, "Advance..."
Click the "DNS" tab.
What's listed for "DNS Server(s):"?
Usually "10.0.1.1" will be listed first in gray. This refers back to the settings in the Airport Utility.
Nevertheless, it doesn't hurt to add the DNS servers noted above here as well.
Click "OK" then click "Apply".
Finally, reboot your Mac.
Now see if you have internet access all around.
Let us know if this resolves your issue.
Cheers! -
Due to problems with my original email I changed my apple id email and password months ago. Suddenly it is reverting to my old email. How do I get it to totally forget the original? I have iPhone, iPad and MacBook Pro.
Hey 1Jerry,
Thanks for the question. You'll want to delete and re-add your iCloud account (utilizing the new Apple ID address). When prompted, opt to keep as much information on your device as possible. The following article provides information on how to do so:
iCloud: Change iCloud feature settings
http://support.apple.com/kb/PH2613
Turn off iCloud completely
Depending on whether you want to stop using iCloud on all or only some devices, do one or more of the following:
On your iOS device’s Home screen, tap Settings > iCloud, then at the bottom of the screen, tap Delete Account.
Thanks,
Matt M. -
Leopard on MacBook and MacBook Pro / running repair permissions
I upgraded both MacBook and MacBook Pro without major problems. I have been trying to repair permissions on the Mac Harddrive , and just get the spinning wheel. I have in the past run Onyx to perform routine maintenance tasks, but did not want to run any third party programs in relation to maintenance. Do I need to run it from the text tool disc? I never used to have to run it from disc.
Thanks.
Jon Pousette-DartI used Cocktail, Onyx, and YASU before Leopard, but had some problems with repairing disk permissions since upgrading to Leopard. Didn't know Cocktail had upgraded to Leopard. I'm impervious to snide remarks from self proclaimed experts.
We run a studio here north of NYC ( which is a standard ProTools HD Accel facility and won't touch Leopard for sometime) Leopard is on two laptops which seem to run good but slower since the Leopard upgrade. Might try the upgraded Cocktail.
As far as Beta Testors, That was the verbatim words out of level two Mac support. Their words not mine. Not one of the guys I talked to even planned on running Leopard on their own machines, as none of us in the pro community will either.
Having said that, it's on two of my laptops, just not the machines I run to do final mixes on.
Jon Pousette-Dart
www.pousette-dart.com
Maybe you are looking for
-
I wonder if there's any firmware version to connect to our providers like Beeline. For I've installed the firmware from MirWiFi.org and have difficulties with setting up. But there's no Internet link with LinkSys jriginal firmware. Could You help me,
-
Dumb newbie question on iphone development
Hi there, just a quick dumb question: Can i develop Iphone apps in Windows platform? This is b'coz I dun have Mac machine.
-
Hi I have defined items batch wise , i want tariff & Supplier ref no automatically should come row wise when in goods receipt po i enter items batch wise. These things are required in Create Batches form. Can anybody help me with the solution Thank
-
Datasource connection failing with error "Cannot open resource"
Hi All, I have created a datsource in VA with JDBC 1.X driver type for a SQL Server. However, now when I try to connect to the datasource from an udf in the Message Mapping, I am getting the below error: Error: com.sap.engine.services.dbpool.exceptio
-
How can I change the color of the font with the Property Inspector?
In Dreamweaver CS6, can one change the font color with the property inspector? How? I don't know if I will automatically be notified when someone responds, and I don't want to be running back to this site every day to check. So if you have an answe