Disk utility 12 not compatible with Mavericks

I upgraded my late 2008 Mac Book Pro to Mavericks several months ago and just tried to open Disk Utility and get a message that the version I have is not compatible with Mavericks. Mine is Disk Utility 12, is there an upgrade available? I looked on the Apple site and couldn't find one. Thanks!

Well, I'm not on my Mavericks machine at the moment, but my Mountain Lion machine has Disk Utility 13, so Mav must have at least that or higher.
Since Disk Utility is not a stand alone application, but an integral part of the OS, I'd suggest you use your recovery partition - hit Command + R keys during restart/boot up and choose to reinstall the OS. That should bring everything up to date.

Similar Messages

Epson Stylus Photo PX710W is not compatible with Mavericks

I still cannot scan with my Epson Stylus Photo PX710W. My scan driver (scan.app version 3.7.1) is not compatible with Mavericks. Who can help me?
Epson does not react to my question when the correct driver will be available.
Epson indicate to their FAQ’s, but this is will not help since the ICA scan only works when my printer/scanner is connected to my Mac via USB. I bought this EPSON printer/scanner because it was wireless. Now after just 3 years I miss this important option.
I see a lot of discussion about Epson scan drivers but little help from Epson
Who can lead me to an appropriate scan driver for my Epson device?

I disagree a bit because my Epson printer/scanner worked very well for over 3 years. It worked under Snow Leopard, Lion and Mountain Lion. But since I installed Mavericks my scanner doesn't work anymore. It's just a case that Epson is very slow in upgrading the drivers within an appropriate time on the one hand and not giving any foresight how long it takes to repair drivers on the other hand. Their website is inadequate and gives me absolute no information at all. I can understand their vision when it comes to printer/scanners which are very old i.e 10 years and mor. But not for relatively new printer/scanners.
So, if anybody can help i'll be very greatefull.

The truesuite is NOT compatible with Mavericks!!!!!

The truesuite is NOT compatible with Mavericks!!!!! Do you wanna solve this problem in a short time? Please HELP me!!!!

http://support.apple.com/kb/TS5338?viewlocale=en_US&locale=en_US

CS5 not compatible with Mavericks 10.9.3?

I just spent 2 grands with the new iMac Mavericks 10.9.3 and now someone told me all my CS5 apps are not compatible with it and I have to upgrade? Seriously????

CS5 is unsupported. It might work, it might not but you're on your own.

HT1338 How do I update osx 10.4.8 if the network admin utility is not compatible with my apple airport extreme and I an't connect to the internet?

I was given an iMac desktop computer, operating system OSX 10.4.8 (2011). The network admin utility is not compatiable with my airport extreme router, and I am unable to connect to the internet to update the software. Can someone please tell me how to update the software or download a newer version on the network admin, or how to connect this computer to the internet?
Thanks,

I assume you have a PPC. There is another update for the Intel.
PPC:
http://support.apple.com/kb/dl177
Download. Do not expand. Copy to your mac. double click on dmg icon.
Have you tried an ethernet cable?
Ethernet Bridge
Ethernet Bridge "The versatile Wireless-G Ethernet Bridge can make any wired Ethernet-equipped device a part of your wireless network." from linksys example: http://www.amazon.com/Linksys-RE1000-Wireless-N-Range-Extender/dp/B005FDXMJS/ref =sr_1_1?ie=UTF8&qid=1314563758&sr=8-1
This linksys bridge is the safest solution since it doesn't require any Mac OS drivers.
Airport ExpressAirport Express is an external unit and you can configure it as a bridge. 802.11n ( I bevieve you will need a more modern version of Mac OS X to configure. Sadly, Apple uses a configuration program to configure, not a web browser. )
USB dongle
Newer Technology MAXPower 802.11g/b Wireless USB 2.0 Stick Adapter $15.99 http://eshop.macsales.com/item/Newer%20Technology/MXP2802GU2/
Newer Technology MAXPower 802.11n/g/b USB Adapter. The easiest way to add Wireless Connectivity to ANY computer! 'n' speed is the newest and fastest. $29.99 http://eshop.macsales.com/item/Newer%20Technology/MXP802NU2C/

Disk utility is not working with 10.9

when i try to open disk utility , a massage appear says (you cant use this version of the application "Dish Utility" with this version of OS X)
Anyone know how to solve this ?

So, it seems you update to 10.9 but disk utility didn;t update?
Run software update to make sure verything is up to date.
After that, I'm at a loss.
i am not fond of incremental upgrades. Back in the days of DVDs I did clean installs - always.
Grant

HPL Editor not compatible with Mavericks

Hi, so recently I've upgraded to mavericks and I've noticed that HPL Editor (used for amnesia the dark descent to make custom stories etc.) is not compatible, it always says the same thing:
Fatal Error: Could not load vertex buffer from mesh 'core_box.dae'
Its strange because every time I reinstall the editors it works just fine, but once I launch it the second time it gives me the error message
Is there a way to solve this?
I was thinking of reinstalling mavericks to mountainlion, but I cant find a way to do it without a backup from time machine, I started doing backups recently and I have none from os mountainlion.
Is there a download or something, cause I would really love to have my editors back, just to say there are also some amnesia issues related for example when I put it to 2880x1800 in a ration of 16:10, it just shows me the bottom corner of the screen, similar with some other games such as league of legends.
So thats it, please help I would love to get my editors and stuff back fully functioning.
Thanks!

Same problem here as well, but good news they are working on a compatible Epson Scan software...
About Image Capture Pro, it is an Apple software, you will find it in System Preferences, Printers & Scanners, you should see your printer... then go on the "scan" window, then "open scanner" (your printer has to be on) then you can pretty much scan anything you want, just like Epson Scan...
That's what I'm doing since I started using Mavericks, and it works fine for me.
If it doesn't work, it means that your ICA Scanner Driver is not working since you upgraded to Mavericks... You need to download it again, you can use this site to get a new one:
http://www.epson.com/cgi-bin/Store/support/SupportMavericks.jsp?BV_UseBVCookie=y es
or you can use our own uk page
http://www.epson.co.uk/gb/en/viewcon/corporatesite/products/mainunits/support/10 990
you'll need to get "Epson Scan" in the "drivers" section, not the other one NOT WEB INSTALLER (I noticed there where 2 of these on the page and you don't get the ICA driver with the second link) and it should download the ICA driver as well as Epson Scan.
Don't bother with epson scan (it doesn't work on Mavericks) and install the ICA package (double-click).
Try scanning using image capture pro and it should work.
PS: I tried dowloading it for you (epson374583eu.dmg) and the ICA driver is there, just dowload the right "epson scan" on the page

Pegasus R6 not compatible with Mavericks

Has anyone found a solution to the problem of Mavericks becoming unstable when connected to a Promise Pegasus R6?

Clinton, thanks for the reply.
I've had 3 disks fail in the R6 since I acquired it. The first 2 failed under OSX Lion and I had no issues in accessing the R6 with the Promise Utility. Under Mavericks, there was no time available after start-up to do anthing more than bring up the Promise Utility and try to diagnose the problem of the failing disk before the whole system became unstable. The only way I managed to rebuild the disk array on the R6 was to quickly start the rebuild off and then unmounting the R6 and close the Promise Utility before the sytem hung,
Anyway, if it happens again, I'll know what I can do to fix it.
Stuart

Promise pegasus pr 6 update not compatible with mavericks?

Promise Pegasus PR6 with Thunderbolt has crashed with Promise Utility Update 3.18.0000.18. New Thunderbolt Bridge does not configure nor does it work. Mac cannot Find RAID. Tried everything. Boot and Re-boot and Power cycle. Mac cannot find the PR6...PR6 cannot find the Mac. On OS 10.9.1.

We're glad that you have been helped! For anyone else reading this, if you have a serious problem like this, call us at Promise Technical Support 408-228-1500 and/or open a web support case at http://support.promise.com
Joe Engledow
Technical Support
Promise Technology

Now that iBiz is not compatible with Mavericks, what type of accounting software works with ical.

I use iBiz for a small business that tracks appointments and expenses. I don't need payroll. Most importantly, I need the software to communicate with calendar since I have to keep my partner's calendar up to date and he uses calendar on his iphone. Now that iBiz is phasing out, I would like to find a replacement.

Your post here is different from the original topic of discussion. It's generally better to start your own Topic, rather than adding onto an existing one ="Threadjacking."
Please start a new topic about your issue so it can receive more focused attention.
=============
In addition to the above.....
When posting in Apple Communties/Forums/Message Boards.......It would help us to know which Mac model you have, which OS & version you're using, how much RAM, etc. You can have this info displayed on the bottom of every post by completing your system profile and filling in the information asked for.
CLICKY CLICK---> https://discussions.apple.com/docs/DOC-3602
CLICKY CLICK-----> Help us to help you on these forums
***This will help in providing you with the proper and/or correct solutions.***

If Java 7 is not compatible with Mavericks, as an answer on another thread seems to indicate, what can I do to restore the functionality of programs that rely on Java 7?

Any ideas? One of the programs my wife uses is suddenly on the blink, and I just upgraded from Snow Leopard to Mavericks.

Thanks Mike!
I'm just so frustrated, its bad enough my other laptop wasn't even 2 yrs old
yet and I've spent $800 to have it fixed twice already, this 3rd time I was
DONE... so I moved onto Sony, but this Vista just is making my life a living
hell, I just spent a fortune on the laptop, and now I have to buy Adobe 9
when my adobe 7 isn't even 2 yrs old... ugh... its just very frustrating and
nerve racking and is costing more than I make in a week in this business
(real estate processing)... I should sell Microsoft for a living, I'd be a
millionaire!
My husband's Mac has been through hell and back physically, is 5 yrs old and
we've never had to take it in for any upgrades or issues, its SO easy to
use... why can't Microsoft be the same?!?!
Thanks for your input and for being understanding of my frustration, I bet
you see those often! LOL

Is my e2500 router compatible with mavericks?

I am trying to reset my linksys e2500 wireless router and when i run the disc it tells me that I am not up to date. Is this router not compatible with Mavericks??

Am using Mac Pro 5,1.
The drop outs to internet happen when connected to a DSL modem via my Asante router. All connections are ethernet; not using wireless.
When I connect directly via ethernet to my Qwest DSL modem, and bypas the router, no problem.
Drop outs while Safari is open, or Google Chrome is open, can occur anytime. If Google Chrome and Safari are both open at the same time, internet dropout occurs for both simultaneously. They occur after waking from sleep also.
I can get back internet connectivity in both Chrome and Safari by unplugging the DC power to the Asante router for 5 seconds, and plugging the power back in; internet connectivity resumes instantly in both Chrome and Safari.
So the problem is not isolated to Safari.
The problem seems isolated to my Mavericks install completed yesterday because:
This same Mac Pro running Win 8.1 from a separate SSD and separate boot to Win 8.1 through the router does not have the problem.
My tenant downstairs running Win 7 through the router does not have any connection problems.
There were no internet drop outs when connected to DSL modem via this same router when I ran Mountain Lion.
Sparky, can you describe a "step-by-step" on how you reset your IP address, etc?
Is this a "handshaking problem" between Mavericks and my router?
Do others have suggestions for solution paths to try?
Will report back right away.
Thank you.

I have an icon on my MAC desktop called disk utility. When I click it on it a message says it is not compatible with this version of OS X. Can I then delete this set of files?

I have an icon on my MAC desktop called disk utility. When I click it on it a message says it is not compatible with this version of OS X. Can I then delete this set of files?

gjspross wrote:
I did upgrade and here is the current version: OS X 10.8.2 (12C60)
I was able to get to and open disk utility through Application> utilities
I thought the disk utility icon on the desktop may be related to my old software. I was going to move it totrash but it had over 2000 files and so I did know if it was still being used or could be moved to trash.
What kind of files are in there? Sounds like a carry over from your last system. DiskUtility should only be kept in Utilities with a shortcut in the dock or an alias on the desktop, idealy.
Cheers
Pete

Disk Utility not compatible with Leopard

Disk Utility does not work.
When I run "Repair Permissions", all errors are unable to be fixed.
The same error messages appear when starting up with the Leopard DVD (pressing "C" during start) via the Disk Utility from the menu.
Now, I am stuck because iTunes will not import anything.
Please help!

Alright, then that's okay.
I managed to solve the mystery of the iTunes files.
It turns out that although the file extensions were the same (.AIFF), I had inadvertently selected Apple/SGI 32 bit (float) = not compatible.
The solution was to select Apple/SGI16 bit (PCM) = compatible with iTunes.
Now how will we be able to rely on Disk Utilities when it reports false information?

Disk Warrior not compatible with OS 10.4.6?

I purchased DiskWarrior (version 3.03) last year and used it once on my old 1.6 GHz iMac with OS 10.3.6.
I now have a 2.1 GHz non-Intel iSight iMac with Mac OS 10.4.6.
I have tried twice to start up from the DiskWarrior CD - the first time, I never got beyond the grey apple and very loud fans whirring; the second time, I got another grey icon (sort of like a traffic sign - a circle with a line through it) along with the spinning wheel. Both times I gave up after 30 minutes and turned the iMac off with the power button.
This is a bit expensive for a one time use. It seems that DiskWarrior is not compatible with OS 10.4.6 and/or the iSight iMac? I checked the Alsoft website - v. 3.03 is the latest version available.

Wow! I think that you will either need to wait until your external drive is free to be erased, or to buy another external drive to be able to do everything you want all at once.
Once you have a free drive, divide it into two partitions, including one that is only about 5GB. Install a bare system using your iMac's Install & Restore Disc 1 onto this small partition. Customize your installation by choosing not to install printer drivers, languages, iLife applications, extra fonts or X11. This installation will be a little over 2GB.
When you first visit this system's Desktop, go to Software Update and install only the 10.4.6 Combined Update, any Java updates and possibly QuickTime 7.0.4. Reboot and repair permissions. Remove everything from the Dock but Safari and System Preferences. Drag Disk Utility into the Dock from your Applications/Utilities/ folder.
Launch Safari, go to shirtpocket.com and download and install the cloning utility, SuperDuper! Drag SuperDuper!'s icon from your Utilities folder to the Dock. Register it if you want the added features, or use the unregistered version to make your clones fresh each time.
Next, insert the Disk Warrior disc (any version of Disk Warrior 3.0.3 will do here) and drag DW to your /Applications/Utilities/ folder. Drag Disk Warrior's icon in your Utilities folder to the Dock.
Now you need only boot into your small maintenance partition to launch Disk Warrior so you can run it on your iMac and/or the clone that is on the external's larger partition. And of course, you'll clone your iMac to the larger partition on your external drive by booting into the smaller partition and running SuperDuper! from there.
Simple!

Disk utility 12 not compatible with Mavericks

Similar Messages

Maybe you are looking for