Disk Utility can't create a new partition

Hello,
I'm trying to create a new partition to install Windows 7 on, but I am unable to do so.
At first I tried to do this with Boot Camp Assistant, but it didn't work.
Then I tried to create a FAT partition with Disk Utility, which didn't work either.
So I verified and repaired the disk, tried to create the partition again, yet it still didn't work.
I verified and repaired the disk and tried to create the partition while running the OS, in Safe Mode and from the Mac OSX Install DVD.
Neither of them worked.
I noticed while running the OS, the info of the HD said the capacity is 749.81 GB, while checking that from the Mac OSX Install DVD it only says about 700 GB (I mentioned 698.6 GB).
Strange..
It might also be important to mention that I recently (2 days ago) I installed a new HD: Western Digital Scorpio Black 750 GB, and today I swapped my 2x 2GB RAM for 2x 4GB RAM (Samsung).
On my previous HD, the Fujitsu 250GB, this proces was no problem at all. I installed W7 on that drive just a week ago.
I made a clone of the Fujitsu HD and "back-upped" it to my new WD HD. The W7 partition on the Fujitsu HD was 50GB, which is the difference in capacity mentioned above. I'm not sure if there's a link here..
I've got a MacBook Pro from mid 2009.
I'm not sure what to do next... I'm stuck!
Any help is greatly appreciated!

Good thing to mention that, I forgot to do that.
Unfortunately it did not help.. The screen to remove the existing Boot Camp partition does not pop up, it just tries to create the new Boot Camp partition.
The partition I'm trying to create it 150GB. The 50GB mentioned above was on the stock Fujitsu 250GB disk.
Edit:
I'm actually trying to avoid using Boot Camp Assistant.. I became to dislike the utility due to problems creating a partition on my previous HD.
I would like to create a partition using Disk Utility and then install Windows 7 by selecting that DVD to boot from.
Thank you for the tip though, I'll post it there as well!

Similar Messages

Disk Utility Hangs When Creating a New Partition

Hello,
I recently purchased a Late 2005 Power Mac G5. My problem is, that the hard drive is 250 MB and only one partition appears in the disk utility of 37 GB. I try to add a new partition, but it hangs on "modifying partition map". Any Help?
Additional info -
Main Disk
Name : WDC WD2500JD-41HBC0
Type : Disk
Partition Map Scheme : Apple Partition Map
Disk Identifier : disk0
Media Name : WDC WD2500JD-41HBC0 WDC WD2500JD-41HBC0
Media Type : Generic
Connection Bus : Serial ATA
Connection ID : Device 0, "A (upper)"
Device Tree : first-boot/@0:0
Bay : "A (upper)"
Writable : Yes
Ejectable : No
Mac OS 9 Drivers Installed : No
Location : Internal
Total Capacity : 232.9 GB (250,059,350,016 Bytes)
S.M.A.R.T. Status : Verified
Disk Number : 0
Partition Number : 0
Partition -
Name : Mac OSX 10.5
Type : Volume
Disk Identifier : disk0s3
Mount Point : /
File System : Mac OS Extended (Journaled)
Connection Bus : ATA
Device Tree : first-boot/@0:3
Writable : Yes
Universal Unique Identifier : 989D8CCE-3C5D-3ECC-9A12-C025D2DF23F2
Capacity : 37.1 GB (39,873,503,232 Bytes)
Free Space : 24.5 GB (26,274,824,192 Bytes)
Used : 12.7 GB (13,598,679,040 Bytes)
Number of Files : 484,775
Number of Folders : 110,579
Owners Enabled : Yes
Can Turn Owners Off : Yes
Can Repair Permissions : Yes
Can Be Verified : Yes
Can Be Repaired : Yes
Can Be Formatted : Yes
Bootable : Yes
Supports Journaling : Yes
Journaled : Yes
Disk Number : 0
Partition Number : 3
Thanks

Have you tried doing this first:
Repair the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
If there are no errors reported then try the routine I suggested rather than trying to expand the existing partition just try to Add a second partition as you have tried before.
If this still gets you nowhere, then I'm afraid you're left with having to repartition from scratch. You'll want to backup the existing files if you don't wish to lose them. I would then do this:
Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
When the above is completed quit DU and return to the installer. Complete the OS X installation.

How can I create a new partition to install Windows 7 by not using Bootcamp

How can I create a new partition to install Windows 7 by not using Bootcamp?

If you want to dualboot you have to use boot camp i think. I think you have already a full disc and cannot make another partition I'm I right?
Your question seems a bit blurry so I'm giving you a general tip here.
If you want to just try the beta you can always use Sun's "Virtualbox".

Can't create a new partition

Hi,
I want to create a new partition as I have done before a few times.
Now, the problem is, that I get an error message, when I'm trying to create one.
Unfortunetally the error message is in German, so I try to translate it:
"Partitioning failed
During partitioning is occurred an error:
MediaKit reports: System has for the desired process not enough memory"
You can see the screenshot under following link:
http://www.apfeltalk.de/forum/partitionen-zusammenf-hren-t174556.html
The point is: I have 2 GB RAM and more than 100 GB on my harddisc free!
Probably this problem occured with Mac OS X 10.5.5.
Does anybody know an solution?
How can I contact Apple to inform them about this problem and get some help?!
Best regards
Stefano

Your translation is probably a little off and rather than meaning there's not enough RAM it means there's not enough contiguous hard drive space to make a partition of that size. I'm assuming that you are trying to partition a drive that already has data on it. If I am right, before the drive can be partitioned, it has to be defragmented so that the drive has no data in a group of tracks equal to the size you requested. It is possible to request a partition size that looks like it should fit but there's one or more files that cannot be moved out to make space for it. That, is what I think has happened to you.
If I am right you can try defragging your hard drive with a program dedicated to defragmenting and optimizing. Some people have had success doing this and others have used such a program and still couldn't partition their drive. You can clone the drive to another hard drive (SuperDuper! and CarbonCopyCloner are two good cloning programs) and then turn around and clone right back to original. This will work because as the files are copied to the target drive they will all be placed in contiguous sectors so the drive will be completely defragmented. Or you can try making a smaller partition.

Disk Utility can't repair and refuse Partition to work

Hi,
Is there any ways to solve this message appearing in the Disk Utility?
When i click repair disk on Disk Utility, message shown;
Repairing permissions for “Macintosh HD”
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/Deploy.bundle/ Contents/Resources/JavaPluginCocoa.bundle/Contents/Resources/Java/deploy.jar", should be lrwxr-xr-x , they are lrw-r--r-- .
Repaired "System/Library/Frameworks/JavaVM.framework/Versions/A/Resources/Deploy.bundle/ Contents/Resources/JavaPluginCocoa.bundle/Contents/Resources/Java/deploy.jar".
Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/readconf ig" has been modified and will not be repaired.
Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/writecon fig" has been modified and will not be repaired.
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle/Contents/Resources/Java/deploy.jar", should be -rw-r--r-- , they are lrwxr-xr-x .
Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle/Contents/Resources/Java/deploy.jar".
Permissions differ on "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle/Contents/Resources/Java/libdeploy.jnilib", should be -rwxr-xr-x , they are lrwxr-xr-x .
Repaired "System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Resources/JavaPlugin Cocoa.bundle/Contents/Resources/Java/libdeploy.jnilib".
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
Permissions repair complete
Then i thought its might not be repair just by one repair.
After that i try repair again however this message still appear.
I ever try restarting and shutting down my MacBook but the message still appear.
I do some research and find that one of the message in the list can be safety ignore
http://support.apple.com/kb/ts1448
Hence i just ignore the message.
Meanwhile i try to partition my hard disk and message shown;
Partition failed
Partition failed with the error:
Could not modify partition map because filesystem verification failed
I getting too frustrated about this problem.... ARRRGGGGHHHH!!!!
Any solutions are welcome. Thanks

You can find an extensive discussion of the permissions repair messages you can ignore at Topic: Permissions Snow Leopard 10.6.4. Nothing on your list of permissions messages is unusual or indicates an issue that needs correction.
However, the partition failed message indicates that you need to run Disk Utility's Repair Disk function on the disk volume. Note that if this is your normal startup volume, you will have to start up from some other disk, such as your installer disc, & run the Repair Disk step from it.
If Disk Utility is unable to repair the HD, you can try more powerful (& costly) utilities like Disk Warrior, but there are no guarantees that any of them will be able to fix all possible problems the HD may have.

Disk Utility - can't create sparse bundle images

Hopefully this is something simple I overlooked, but no matter which options I seem to choose, I can't seem to create a sparse bundle disk image to encrypt private documents.
It always complains with a "resource busy"

Have you tried using Disk Utility to Repair Permissions, first? That may solve your problem, so I would try it first.
If that doesn't do it, go to Users/Library/Preferences and find the com.apple.DiskUtility.plist file and drag it to your Desktop. Then launch Disk Utility and try to create a .dmg file. If the problem is solved, then you can Trash the file on your Desktop.
Mulder
If my answer helped solve your problem, please consider awarding some points. Why Reward Points?
iMac G4 700Mhz Mac OS X (10.3.9)

Can't create a 3rd partition in Disk Utility

Long story short I have used Boot Camp to get Windows, so I have 2 partitions. But, I need to create another partition to install another copy of Windows on it, but Disk Utility has grayed out the '+' to allow me to create a new partition. All I can do is delete the 'BOOTCAMP' partition which I don't want to do. I tried another way by going into Boot Camp Assistant and installing Windows through there. I have a bootable USB drive and I know how to install it, all that's stopping me is the partition issue.
Any ideas?
If it helps, I'm using a Late 2013 MacBook Pro with a 15" Retina Display, 2.5 GHz, 512 GB SSD, 16 GB RAM and a NVIDIA GT 750 M.
Thank you for your help

Good thing to mention that, I forgot to do that.
Unfortunately it did not help.. The screen to remove the existing Boot Camp partition does not pop up, it just tries to create the new Boot Camp partition.
The partition I'm trying to create it 150GB. The 50GB mentioned above was on the stock Fujitsu 250GB disk.
Edit:
I'm actually trying to avoid using Boot Camp Assistant.. I became to dislike the utility due to problems creating a partition on my previous HD.
I would like to create a partition using Disk Utility and then install Windows 7 by selecting that DVD to boot from.
Thank you for the tip though, I'll post it there as well!

How can I create a new folder in an external disk that is connected via USB to my Mac?

How can I create a new folder in an external disk that is connected via USB to my Mac?

Just like you would create a new folder anywhere. Open the drive's icon from your desktop or the Finder, and click shift-command-N. (Or use the Finder menu if you prefer - File - New Folder).
If you can't create a folder, your drive may be the wrong format (you can't write to a Windows/NTFS formatted drive, for example). You'll have to back up any files you have on there, and then use Disk Utility to reformat it to Mac Extended (if it will only be used on a Mac) or MS-DOS format (if you want to share it with a PC).
Matt

Disk utility can't repair a partition on external hard drive

I have a 1TB Western Digital external FW drive that's only a couple years old (2 or 3, probably). I have it split into partitions, one of which I'm using for Time Machine. The non-Time Machine partition checked out fine with DIsk Utility, but when I ran Disk Utility on the Time Machine partition, I received this message:
Disk Utility stopped reparing "Time Machine." Disk Utility can't repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
Does this mean the drive itself is failing? I erased the Time Machine partition and recreated it through Disk Utility, and then I verified it. Everything checked out okay, but I want to make sure, especially since I'm hosting my iTunes music in the other partition (it's backed up to a 2nd external drive, so if the drive does die, at least I don't lose everything).
Before this problem happened, both partitions dropped off the Finder and the light on the drive went off. I unplugged the drive and plugged it back in again a couple times, but nothing happened. Finally, the light went back on after plugging it back in for the 3rd or 4th time, but I'm wondering if the drive could be going bad, which would surprise me since it isn't very old.

Brad Cook wrote:
Disk Utility stopped reparing "Time Machine." Disk Utility can't repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
Does this mean the drive itself is failing?
Possibly, but not necessarily. The File System on the disk was so badly corrupted that Disk Utility couldn't fix it. That might indicate a problem with the drive. It's not unusual for consumer-quality (ie, inexpensive) drives to fail after 2-3 years, although many will run for several years. It's a bit of a crapshoot.
Before this problem happened, both partitions dropped off the Finder and the light on the drive went off.
Whatever caused that is another good possibility -- if a drive is improperly disconnected, OSX can't "close it out" properly, and that can cause damage to the file system. Sometimes Disk Utility can fix it, sometimes it can't. And sometimes heavy-duty 3rd-party disk repair apps like DiskWarrior can fix things Disk Utility can't.
A power dip or spike could have caused it, or an overheated electronic component, etc. If it has it's own power supply, be sure it's on a good (ie, not cheap) surge protector or U.P.S. system.
Otherwise, keep an eye on it. If you don't have "secondary" backups, this would be an excellent time to get another drive for that purpose. See #27 in Time Machine - Frequently Asked Questions for some suggestions.
Bottom line: personally, I'd not trust my only backups to that drive.
(But then, I'd never trust my backups to any single drive, no matter how new or high-quality.)

HT4718 i need to install a fresh copy of OS X onto my macbook pro 13. i did erase the old partition "macintosh hd" & now when i am trying to create a new partition, it shows "partition failed..couldnt unmount disk"...pls help !!

i need to install a fresh copy of OS X onto my macbook pro 13. i did erase the old partition "macintosh hd" & now when i am trying to create a new partition, it shows "partition failed..couldnt unmount disk"...pls help !!

First of all, I have to ask, why to you "need" to install a fresh copy of OSX?
This may mean that your hard drive is failing, so hopefully you have a backup.
I'm assuming you were in your recovery partition when you did this.
I would, from the recovery partition, repair your hard drive and permissions.
When to Run First Aid in Mountain Lion's Disk Utility - For Dummies
And then try to create the partition again.
If that doesn't work, you have a few options:
Try a third party utility like DiskWarrior or TechTool which may be able to repair your hard drive:
DiskWarrior 4 - The Disk Utility for Mac Disk Repair, Mac Directory Repair, Mac Disk Recovery, Mac Data Recovery or Techtool Pro 7
Try internet recovery, perhaps erase the entire hard drive and reinstall ML.
If nothing else works, then I'd replace the HD and start over.

I have created a new partition on the Mac HD for Lion as I would like to dual boot. Do I need to install Snow Leopard on that partition before installing Lion? If so, can I use one of my Time Machine backups to do this?

I have created a new partition on the Mac HD for Lion as I would like to dual boot. Do I need to install Snow Leopard on that partition before installing Lion? If so, can I use one of my Time Machine backups to do this?

zoominnana wrote:
Can I set up 2 different time capsule backups? one for the lion partition and one for the snow leopard partition?
No, you can't partition a Time Capsule's internal HD. Both partitions will back up to the same sparse bundle. keeping the backups for each partition separate.
Time Machine will not take the two OSX partitions as two different computers, but for best results, exclude the Snow Leopard drive from backups on the Lion partition, and exclude the Lion partition from backups on the Snow Leopard partition.
There may be some files on the Lion partition that Time Machine on Snow Leopard won't like, among other things. See #10 in Time Machine - Frequently Asked Questions for details.

Partition errors - "Disk Utility can't repair this disk"

I partitioned my external 1TB WD HD into two drives (950GB + 50GB) using Disk Utility (OS X Mavericks 10.9.1). However the 950GB partition will no longer mount. It is recognised in Disk Utility, but grayed out. "Verify Disk" and "Repair Disk" in Disk Utility lead to the worrying error message "Disk Utility can't repair this disk."
From the Disk Utility logs, the initial partition was successful:
Partition 1:
Name: “Media Centre”
Size: 948.13 GB
File system: Mac OS Extended (Journaled)
Do not erase contents
Partition 2:
Name: “Media Centre 2”
Size: 50.03 GB
File system: Mac OS Extended (Journaled)
Do not erase contents
Mounting disk
Partition complete
Afterwards, I changed the name of the second partition “Media Centre 2” to "BOOTCAMP" (I was going to try to install Windows 7), but then changed my mind and tried to remove the second partition. At that point the log gives the error "Mount of “Media Centre” failed".
Partition 1 ("Media Centre") now seems to be in limbo, stuck as 950GB, and "Verify Disk" and "Repair Disk" in Disk Utility lead to the worrying error message "Disk Utility can't repair this disk". Also in Disk Utility, Partition 1 ("Media Centre") now has the format classification "Mac OS Extended" rather than "Mac OS Extended (Journaled)".
Any idea how I can get my hard drive to mount and get the data back?

In Disk Utility select the Top most entry on the left, the drive model and or manufacturer name and size entry, then click the Partition tab and Repartition it to your liking. If that fails the drive is bad.

Disk Utility can't repair TM backup disk

Hello all
Recently, my external backup disk (a 750 GB WD My Passport) that I use with Time Machine has been acting up. At first, it wouldn't show up on the desktop, but was being recognized in Disk Utility (with the "Time Machine Backup" partition greyed out). After multiple restarts and unplugging/replugging the hard drive, I finally got to be properly recognized, i.e. it showed up on the desktop with the proper Time Machine hard drive icon. So I thought the problem was gone and started a routine backup. However, Time Machine returned an error:
"Unable to complete backup. An error occurred while creating the backup folder."
I search the forums, and followed the advice here: http://web.me.com/pondini/Time_Machine/C10.html
I tried repairing the disk, but DU couldn't repair it:
Verify and Repair volume “Time Machine Backups”
Checking Journaled HFS Plus volume.
Detected a case-sensitive volume.
Checking extents overflow file.
Checking catalog file.
Incorrect number of thread records
Checking multi-linked files.
Checking catalog hierarchy.
Checking extended attributes file.
Checking multi-linked directories.
Checking volume bitmap.
Checking volume information.
Invalid volume file count
(It should be 3991498 instead of 3904049)
Invalid volume directory count
(It should be 678218 instead of 673790)
Invalid volume free block count
(It should be 9588404 instead of 11784378)
Volume header needs minor repair
The volume Time Machine Backups was found corrupt and needs to be repaired.
Volume repair complete.Updating boot support partitions for the volume as required.
Error: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
So now I'm still following the advice on the above mentioned page by posting on here. Any help at all would be greatly appreciated. I am using a 2010 15in 2.66 i7 MBP, if that makes a difference, although my guess is the problem's with the harddrive itself. I think there may have been one time about a month ago when Time Machine stopped responding (or something like that) which forced me to pull out the harddrive, possibly corrupting the data. But I'm not sure, and I do recall making at least one successful backup after that. Well, actually TM confirms this: "Latest successful backup: 5/27/11 at 11:51 PM". So I have no idea what's going on. Again, any help would be appreciated.

You can't tell what's corrupted or where. Time Machine backups have a very complex structure, all linked together. So, you can often do new backups, or restore individual items, or even entire backups, as long as you don't stumble over the damage.
There's a chance a heavy-duty 3rd-party disk repair app, such as Disk Warrior, can repair them. It's about $100, and probably a good investment for the future, but there's no guarantee it can fix them.
If not, or if you don't want to spend the money, your only option is to erase the disk and let Time Machine start fresh.
It sounds like you may have other data on it; if that's in the same partition, that's not a good idea. This is a good time to copy the data off, erase the disk, and make 2 (or more) partitions on it, so Time Machine has its own, exclusive space. See #3 in Time Machine - Frequently Asked Questions for details and instructions.

Disk Utility: Unable to create "ImageName.dmg" error -39

Ladies,
Gentlemen,
I used Disk Utility to backup the internal hard drive of my iMac G5 iSight.
The last backup of the hard drive was unsuccessful, ending with next message: Unable to create "ImageName.dmg"; error -39.
The iMac is running OS X 10.4.11.
I proceed as follows:
Boot from the OS X 10.4.2 installation DVD and firing up Disk Utility.
Menu option: File, New, Disk Image from disk0s3 (Mac HD)
The target disk is Porche_LaCie FireWire drive.
After +/- 2 hours I end up with the above message.
The hard drive has following characteristics:
Name : Mac HD
Type : Volume
Disk Identifier : disk0s3
Mount Point : /
File System : Mac OS Extended (Journaled)
Connection Bus : ATA
Partition Type : Apple_HFS
Device Tree : sata/k2-sata@0/@0:3
Writable : Yes
Universal Unique Identifier : 9AFCA71A-DD8B-376E-9776-EE7EDDBB328C
Capacity : 148,9 GB (159.907.627.008 Bytes)
Free Space : 96,9 GB (103.996.362.752 Bytes)
Used : 52,1 GB (55.911.264.256 Bytes)
Number of Files : 419.419
Number of Folders : 104.321
Owners Enabled : Yes
Can Turn Owners Off : Yes
Can Repair Permissions : Yes
Can Be Verified : Yes
Can Be Repaired : Yes
Can Be Formatted : Yes
Bootable : Yes
Supports Journaling : Yes
Journaled : Yes
S.M.A.R.T. Status : Verified
Disk Number : 0
Partition Number : 3
The target drive characteristics:
Name : Porche_LaCie
Type : Volume
Disk Identifier : disk1s1
Mount Point : /Volumes/Porche_LaCie
File System : Mac OS Extended (Case-sensitive, Journaled)
Connection Bus : FireWire
Partition Type : Apple_HFS
Device Tree : fw/node@d04b7417066788/sbp-2@c000/@0:1
Writable : Yes
Universal Unique Identifier : BCCEBED2-08F5-3C21-8750-75716AF060B9
Capacity : 232,9 GB (250.056.705.024 Bytes)
Free Space : 160,8 GB (172.646.076.416 Bytes)
Used : 72,1 GB (77.410.627.584 Bytes)
Number of Files : 15
Number of Folders : 4
Owners Enabled : No
Can Turn Owners Off : Yes
Can Be Formatted : Yes
Bootable : Yes
Supports Journaling : Yes
Journaled : Yes
S.M.A.R.T. Status : Not Supported
Disk Number : 1
Partition Number : 1
The target drive already contains 3 earlier images. The biggest image has a size of 28,14 GB. And as you can see this drive ha enough place for other images.
So what is going wrong?
I Googled for this error -39 without any success and I have not found any thing about this particular error in Apple's discussions or support pages.
I would feel a lot safer with a decent image of my Hard Drive. I already lost one and do not want to repeat this again...
Can any one help?

If you want to create a backup of your system volume, then do not use disc images. They are not bootable. Here's a far better solution:
How to Clone Using Restore Option of Disk Utility
1. Open Disk Utility from the Utilities folder.
2. Select the backup or destination volume from the left side list.
3. Click on the Erase tab in the DU main window. Set the format type to Mac OS Extended (journaled, if available) and click on the Erase button. This step can be skipped if the destination has already been freshly erased.
4. Click on the Restore tab in the DU main window.
5. Select the backup or destination volume from the left side list and drag it to the Destination entry field.
6. Select the startup or source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
You can also do the same using other backup utilities that can create bootable backups:
Backup Software Recommendations
My personal recommendations are (order is not significant):
1. Retrospect Desktop (Commercial - not yet universal binary)
2. Synchronize! Pro X (Commercial)
3. Synk (Backup, Standard, or Pro)
4. Deja Vu (Shareware)
5. Carbon Copy Cloner (Donationware)
6. SuperDuper! (Commercial)
7. Intego Personal Backup (Commercial)
8. Data Backup (Commercial)
Also read How to Back Up and Restore Your Files.

Boot Camp can't create a Windows partition

Hello,
I'm trying to create a new partition to install Windows 7 on, but I am unable to do so.
At first I tried to do this with Boot Camp Assistant, but it didn't work.
Then I tried to create a FAT partition with Disk Utility, which didn't work either.
So I verified and repaired the disk, tried to create the partition again, yet it still didn't work.
I verified and repaired the disk and tried to create the partition while running the OS, in Safe Mode and from the Mac OSX Install DVD.
Neither of them worked.
I noticed while running the OS, the info of the HD said the capacity is 749.81 GB, while checking that from the Mac OSX Install DVD it only says about 700 GB (I mentioned 698.6 GB).
Strange..
It might also be important to mention that I recently (2 days ago) I installed a new HD: Western Digital Scorpio Black 750 GB, and today I swapped my 2x 2GB RAM for 2x 4GB RAM (Samsung).
On my previous HD, the Fujitsu 250GB, this proces was no problem at all. I installed W7 on that drive just a week ago.
I made a clone of the Fujitsu HD and "back-upped" it to my new WD HD. The W7 partition on the Fujitsu HD was 50GB, which is the difference in capacity mentioned above. I'm not sure if there's a link here..
I've got a MacBook Pro from mid 2009.
I'm not sure what to do next... I'm stuck!
Any help is greatly appreciated!

Did you do an upgrade to Leopard? If so, some files may be scattered over your HD, making it impossible for BC to find a single contiguous area on the drive.
Also, be sure you did not have eDisk installed - that's the thing from the TechTools disk that comes with AppleCare.
This is not an uncommon problem. It's not just you.
If you have a complete backup of Leopard, you can use the DU to make a single partition. You may be lucky and not lose any data, but backup anwyay.
In DU, repair the disk, if necessary and verify/repair permissions.
Once you have done this try again.
If BC still fails, you will need to erase the HD and then copy everything back from the backup.
I always suggest a bootable clone for the backup and be sure to test it first to see it works.

Disk Utility can't create a new partition

Similar Messages

Maybe you are looking for