Disk utility can't repair a partition on external hard drive

I have a 1TB Western Digital external FW drive that's only a couple years old (2 or 3, probably). I have it split into partitions, one of which I'm using for Time Machine. The non-Time Machine partition checked out fine with DIsk Utility, but when I ran Disk Utility on the Time Machine partition, I received this message:
Disk Utility stopped reparing "Time Machine." Disk Utility can't repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
Does this mean the drive itself is failing? I erased the Time Machine partition and recreated it through Disk Utility, and then I verified it. Everything checked out okay, but I want to make sure, especially since I'm hosting my iTunes music in the other partition (it's backed up to a 2nd external drive, so if the drive does die, at least I don't lose everything).
Before this problem happened, both partitions dropped off the Finder and the light on the drive went off. I unplugged the drive and plugged it back in again a couple times, but nothing happened. Finally, the light went back on after plugging it back in for the 3rd or 4th time, but I'm wondering if the drive could be going bad, which would surprise me since it isn't very old.

Brad Cook wrote:
Disk Utility stopped reparing "Time Machine." Disk Utility can't repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
Does this mean the drive itself is failing?
Possibly, but not necessarily. The File System on the disk was so badly corrupted that Disk Utility couldn't fix it. That might indicate a problem with the drive. It's not unusual for consumer-quality (ie, inexpensive) drives to fail after 2-3 years, although many will run for several years. It's a bit of a crapshoot.
Before this problem happened, both partitions dropped off the Finder and the light on the drive went off.
Whatever caused that is another good possibility -- if a drive is improperly disconnected, OSX can't "close it out" properly, and that can cause damage to the file system. Sometimes Disk Utility can fix it, sometimes it can't. And sometimes heavy-duty 3rd-party disk repair apps like DiskWarrior can fix things Disk Utility can't.
A power dip or spike could have caused it, or an overheated electronic component, etc. If it has it's own power supply, be sure it's on a good (ie, not cheap) surge protector or U.P.S. system.
Otherwise, keep an eye on it. If you don't have "secondary" backups, this would be an excellent time to get another drive for that purpose. See #27 in Time Machine - Frequently Asked Questions for some suggestions.
Bottom line: personally, I'd not trust my only backups to that drive.
(But then, I'd never trust my backups to any single drive, no matter how new or high-quality.)

Similar Messages

Can't Mount Second Partition on External Hard Drive

I have a 1 TB Seagate External HD that I have two partitions on...a 700 GB one for Time Machine and 300 GB for my personal files (called Nick's External). I was initially having trouble with it and transferred the files from the Nick's External partition to a Western Digital external. I then reformatted the Seagate one into two partitions (Mac OS Extended) and transferred everything back. After attempting a time machine backup and it seizing up, I attempted to eject both partitions. It wasn't done correctly, and now when I plug in the external I can see the drive in Disk Utility and see the first Time Machine partition, but the second partition only comes up as the disk identifier (disk2s3). It cannot be repaired.
I've tried running Disk Warrior but it only sees the first partition (Time Machine) and not the partition I actually have files on (Nick's External). I am also unable to mount the second partition, either through Disk Utility or Terminal.
Any ideas would be greatly appreciated!!

Brad Cook wrote:
Disk Utility stopped reparing "Time Machine." Disk Utility can't repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
Does this mean the drive itself is failing?
Possibly, but not necessarily. The File System on the disk was so badly corrupted that Disk Utility couldn't fix it. That might indicate a problem with the drive. It's not unusual for consumer-quality (ie, inexpensive) drives to fail after 2-3 years, although many will run for several years. It's a bit of a crapshoot.
Before this problem happened, both partitions dropped off the Finder and the light on the drive went off.
Whatever caused that is another good possibility -- if a drive is improperly disconnected, OSX can't "close it out" properly, and that can cause damage to the file system. Sometimes Disk Utility can fix it, sometimes it can't. And sometimes heavy-duty 3rd-party disk repair apps like DiskWarrior can fix things Disk Utility can't.
A power dip or spike could have caused it, or an overheated electronic component, etc. If it has it's own power supply, be sure it's on a good (ie, not cheap) surge protector or U.P.S. system.
Otherwise, keep an eye on it. If you don't have "secondary" backups, this would be an excellent time to get another drive for that purpose. See #27 in Time Machine - Frequently Asked Questions for some suggestions.
Bottom line: personally, I'd not trust my only backups to that drive.
(But then, I'd never trust my backups to any single drive, no matter how new or high-quality.)

Disk utility recovery of files after deleting from external hard drive?

I had downloaded some files to add to an external hard drive, the hard drive was assigned to a pc before adding these files so it wouldn't let me add files from my MacBook..
Had a look around online and made some changes (well thats what I thought) and I was able to transfer files form my MacBook onto the external hard drive.
What I then figured out was that there was nothing left on the hard drive except for the two file sI just transferred..
It turns out I deleted everyting without noticing.
The stpes I followed was to go to disk utility then select the hard drive and click erase (not knowing this would erase evrything).
So now I have two files on my hard drive and no idea how to recover the 'delted' files.
I tried using Disk Drill, which found the files but then it said I need to buy the full version to recover them.
I am wondering if there is any free methods to recover these files at all, any help is appreciated.

The files are still on the drive, and will remain unless and until you overwrite them with new data. So don't write anything more to the drive in addition to the two files you added after reformatting it, and do download the free trial version(s) of one or more data recovery utilities:
Data Rescue 3: http://www.prosofteng.com/products/data_rescue.php
FileSalvage 7: http://subrosasoft.com/OSXSoftware/index.php?main_page=product_info&products_id= 1
Each is offered in a free demo version that will show you exactly what the full version could recover before you have to pay for anything. There are others on the market, but these are the ones I'm familiar with.
To recover data using any such utility, you must have another drive available on which to save the recovered files. Saving them on the same drive they're being recovered from would just overwrite other files that haven't yet been recovered.

Disk Utility Wont do anything on my new External Hard Drive

DU won't mount, unmount, eject, erase or partition, i have tried doing the force unmount and erase commands in terminal, i have also tried doing it at the start up command + R page. Hard drive mount ad works perfectly fine on imac

it worked when i first plugged it in then i formatted it to MS-DOS(FAT) after that it didn't work, It sometimes shows up in DU the disk will appear but the partition will be grey (unmounted)
if i try to use another (working) hard drive in to the usb port the i've had this on in it wonk work either until i restart
both usb ports work fine with other hard drives
the imac it works on is running mountain lion

Partition errors - "Disk Utility can't repair this disk"

I partitioned my external 1TB WD HD into two drives (950GB + 50GB) using Disk Utility (OS X Mavericks 10.9.1). However the 950GB partition will no longer mount. It is recognised in Disk Utility, but grayed out. "Verify Disk" and "Repair Disk" in Disk Utility lead to the worrying error message "Disk Utility can't repair this disk."
From the Disk Utility logs, the initial partition was successful:
Partition 1:
Name: “Media Centre”
Size: 948.13 GB
File system: Mac OS Extended (Journaled)
Do not erase contents
Partition 2:
Name: “Media Centre 2”
Size: 50.03 GB
File system: Mac OS Extended (Journaled)
Do not erase contents
Mounting disk
Partition complete
Afterwards, I changed the name of the second partition “Media Centre 2” to "BOOTCAMP" (I was going to try to install Windows 7), but then changed my mind and tried to remove the second partition. At that point the log gives the error "Mount of “Media Centre” failed".
Partition 1 ("Media Centre") now seems to be in limbo, stuck as 950GB, and "Verify Disk" and "Repair Disk" in Disk Utility lead to the worrying error message "Disk Utility can't repair this disk". Also in Disk Utility, Partition 1 ("Media Centre") now has the format classification "Mac OS Extended" rather than "Mac OS Extended (Journaled)".
Any idea how I can get my hard drive to mount and get the data back?

In Disk Utility select the Top most entry on the left, the drive model and or manufacturer name and size entry, then click the Partition tab and Repartition it to your liking. If that fails the drive is bad.

After getting the dreaded gray/blue screen, I tried to run disk repair on the internal disk. I got an error message saying "Disk Utility can't repair this disk and restore your backed-up files. The volume Macintosh HD could not be verified completely

After getting the dreaded gray/blue screen, I tried to run disk repair on the internal disk. I got an error message saying "Disk Utility can't repair this disk and restore your backed-up files. The volume Macintosh HD could not be verified completely." What do I do now? This is an iMac and I'm running 10.6.8.

Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it. See below for how to clone a drive.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. Be sure you configure your initial admin account with the exact same
         username and password that you used on your old drive. After you finish Setup
         Assistant will complete the installation after which you will be running a fresh
         install of OS X. You can now begin the update process by opening Software
         Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
You may be able to backup your data if you have an erased external drive you can use. Before you do the above but after you have opened Disk Utility you can try to clone your drive:
Clone using Restore Option of Disk Utility
1. Open Disk Utility.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Select the destination volume from the left side list and drag
       it to the Destination entry field.
5. Select the source volume from the left side list and drag it to
      the Source entry field.
6. Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
Now this will only work if the drive is accessible and can be cloned by Disk Utility. Otherwise, you would need to access your drive from another Mac that you can connect via Firewire - Target Disk Mode.

External Hard Drive Disk Utility Can't Repair the Disk

Hi,
I have a Seagate 1 TB Backup Plus Drive which was working perfectly fine until I plugged it into a USB hub. It detected it while in the hub and I was able to get files off of it, but when I ejected it from the hub and put it back into the USB slot on the computer it was not detected by finder. It shows up in the disk utility and I clicked verify and repair and it says:
Verify and Repair volume “Seagate Backup Plus Drive”
Checking file system
Volume repair complete.
Updating boot support partitions for the volume as required.
Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
Is there any way to get this to work properly again? Or if not is there a way for me to recover my files on the external hard drive?
Thanks
I have a Macbook PRO late 2011 running OS X Mavericks.

Use a more powerful utility such as DiskWarrior, or a product such as those listed here.
(108710)

Disk Utility can't repair TM backup disk

Hello all
Recently, my external backup disk (a 750 GB WD My Passport) that I use with Time Machine has been acting up. At first, it wouldn't show up on the desktop, but was being recognized in Disk Utility (with the "Time Machine Backup" partition greyed out). After multiple restarts and unplugging/replugging the hard drive, I finally got to be properly recognized, i.e. it showed up on the desktop with the proper Time Machine hard drive icon. So I thought the problem was gone and started a routine backup. However, Time Machine returned an error:
"Unable to complete backup. An error occurred while creating the backup folder."
I search the forums, and followed the advice here: http://web.me.com/pondini/Time_Machine/C10.html
I tried repairing the disk, but DU couldn't repair it:
Verify and Repair volume “Time Machine Backups”
Checking Journaled HFS Plus volume.
Detected a case-sensitive volume.
Checking extents overflow file.
Checking catalog file.
Incorrect number of thread records
Checking multi-linked files.
Checking catalog hierarchy.
Checking extended attributes file.
Checking multi-linked directories.
Checking volume bitmap.
Checking volume information.
Invalid volume file count
(It should be 3991498 instead of 3904049)
Invalid volume directory count
(It should be 678218 instead of 673790)
Invalid volume free block count
(It should be 9588404 instead of 11784378)
Volume header needs minor repair
The volume Time Machine Backups was found corrupt and needs to be repaired.
Volume repair complete.Updating boot support partitions for the volume as required.
Error: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
So now I'm still following the advice on the above mentioned page by posting on here. Any help at all would be greatly appreciated. I am using a 2010 15in 2.66 i7 MBP, if that makes a difference, although my guess is the problem's with the harddrive itself. I think there may have been one time about a month ago when Time Machine stopped responding (or something like that) which forced me to pull out the harddrive, possibly corrupting the data. But I'm not sure, and I do recall making at least one successful backup after that. Well, actually TM confirms this: "Latest successful backup: 5/27/11 at 11:51 PM". So I have no idea what's going on. Again, any help would be appreciated.

You can't tell what's corrupted or where. Time Machine backups have a very complex structure, all linked together. So, you can often do new backups, or restore individual items, or even entire backups, as long as you don't stumble over the damage.
There's a chance a heavy-duty 3rd-party disk repair app, such as Disk Warrior, can repair them. It's about $100, and probably a good investment for the future, but there's no guarantee it can fix them.
If not, or if you don't want to spend the money, your only option is to erase the disk and let Time Machine start fresh.
It sounds like you may have other data on it; if that's in the same partition, that's not a good idea. This is a good time to copy the data off, erase the disk, and make 2 (or more) partitions on it, so Time Machine has its own, exclusive space. See #3 in Time Machine - Frequently Asked Questions for details and instructions.

Disk Utility can't repair this disk

I have been having trouble booting. It started when I connected a router to it. It seemed to eat up the free disk space and I only have 77 MB left or something around that.
Anyway, I tried deleting files with command-s commands, and it worked one time and it freed up 2 GB of space. I restarted the computer and when I tried to start it up, it still got stuck in the gray screen with the whirly thing at the bottom. I checked the space and it was 77MB now.
I decided to boot from the Install Disk (Snow Leopard 10.6.0).
I checked Disk Utility first and verified the disk. It came up with the message:
"Error: Disk Utility can't repair this disk .... disk, and restore your backed-up files."
What should I do now?
I have the Mac HD volume on backup already so I don't have to do the back up stage.
Should I erase the disk while I am in Disk Utility?
And format it to Mac OS Extended Journal?
And then install the operating system again?
Thanks.

To answer your questions, first, some other options...
If you fill your disk up that far, you are going to have problems. Don't ever do this, 10% is a bare minimum, you may need even more, depending on the size of your disc.
I have seen before where a disc repair utility couldn't perform its function simply because there was not enough slack space available on the drive. While I have never seen this with disc utility, it is possible that the disc is repairable as-is, if you could just free up a couple more gigs of space first.
Secondly, you could also try Disk Warrior, or to a lesser extent, Techtool Pro, or even iDefrag. I have personally never had Techtool Pro fix anything that Disk Utility or Disk Warrior couldn't fix, so I hesitate to even mention it, but I have had Disk Warrior and iDefrag clear up problems that Disk Utility either couldn't detect, or couldn't fix.
If you are still in dire straits, you should re-partition the drive using disk utility. This is the safest route, then go from there.
good luck!
-a

Macbook Pro (mid 2012) Disk Utility can't repair HD

I have a friend's MacBook Pro in my possession that is not working and has not been used for about two months. After startup, seeing the loading bar, and getting stuck on the spinning wheel of death, I have taken some steps to try to get a boot into Mac OS X. I've reset the PRAM, tried booting in safe mode, and lastly tried to repair Macintosh HD via Disk Utility in the recovery partition. No luck. I get this message after an attempted repair.. "Disk Utility can't repair this disk...disk, and restore your backed up file".
This is a similar problem to this discussion thread here:
Disk Utility cannot repair Macintosh HD
However, in this scenario, my friend does not have any Time Machine backups and would like to recover his files.
I know that I can re-format and do a fresh install of OS X...but where does that leave me with file recovery?
Is it possible to retrieve the files at all?
Any help from the community would be GREATLY appreciated!
Thanks

I have a friend's MacBook Pro in my possession that is not working and has not been used for about two months. After startup, seeing the loading bar, and getting stuck on the spinning wheel of death, I have taken some steps to try to get a boot into Mac OS X. I've reset the PRAM, tried booting in safe mode, and lastly tried to repair Macintosh HD via Disk Utility in the recovery partition. No luck. I get this message after an attempted repair.. "Disk Utility can't repair this disk...disk, and restore your backed up file".
This is a similar problem to this discussion thread here:
Disk Utility cannot repair Macintosh HD
However, in this scenario, my friend does not have any Time Machine backups and would like to recover his files.
I know that I can re-format and do a fresh install of OS X...but where does that leave me with file recovery?
Is it possible to retrieve the files at all?
Any help from the community would be GREATLY appreciated!
Thanks

MB pro shuts off after bootup chime, hd damaged/volumeheader related - disk utility can't repair - how do i recover/backup my files??

Hi guys,
My macbook pro late(dec) 2011, doesn't boot up anymore, it just turns off after the chime (whilst a gray bar is loading a bit and then the MB shuts off)...
This all happened after I upgraded to mavericks, safari and chrome were spontaneously shutting off, my macbook kept restarting (all after recommended app store updates), it had kernel panics etc. Last night after an update it just wouldn't boot up anymore! Pff.. what should i do?
Disk utility can't repair the damaged HD, it had something to do with volume headers..
I basically want to access my macbook's files and documents so that i can transfer them onto an external hd or back them up.. i just want my files afterwards i can reformat or whatever as long as i get the files and contents of my hd back..
Ive read of diskwarrior? Can i burn that on a dvd and insert it into my mac, then start my mac and then it allows me to drag and drop all the contents of my hd onto an external hd?
I need a genius to help me!! A step by step guide would really mean the world to me!!
Thanks in advance mysterious genius!!!

Step 4(a) open Disk Utility from Utilities on the menu bar, then proceed to highlight the external drive in the left sidebar as you say and choosing Partition from the row of buttons that appear top center in the main window of DU.
5(a) click Restore on the bar of buttons top center of the main DU window, then what you say. But use the name you have given the external drive in step 4, Mac OS X Extended (Journaled) is the way it has been formatted, use a name such as Backup or something obvious to you.
Step 7, On the menu bar, click File, then New Finder Window. In the left sidebar you will see Devices and the internal and external drives will be listed. Click the name of the external drive and then in the main part of the window you should see the contents of the external drive. You can click on the folder for Users, then your user name, and see what folders appear...make sure the folders such as Documents, Pictures and whatever else you use appear and have the content you expect to be there.
You want to be sure all the content has been copied over since the step of erasing the internal drive is going to permanently remove it from that drive.
And then after step 8, add step 9, from Utilities on the menu bar, choose Install Mac OS X, and if it asks where to install, choose the internal, Macintosh HD, as where to install.

Disk utility can't repair disk, back up and restore files......I need help, I'm worried I'll lose all my photos, files etc

Mac started hanging up while streamlining a kids show. Restarted and got the screen with the apple and the circle. restarted with control-option p and r. Ran disk repairitem got the following results;
invalid index key,
it rebuilds catalog b-tree,
volume repair complete,
updating boot support partitions for the volume as required,
Error disk utility can't repair disk
I'm then prompted to back up all files, reformat the disk and restore backed up files.
Obviously need help here as I think I'm in danger of losing my files, photos etc if I don't do this right.
Can anyone help
Steve

You might want to back up the disk as soon as possible, do the repair, then back it up again. First time will have the issues that Disk Utility can't fix, however, you'll have the data saved. Then, once you get things repaired, make a new backup, and go from there.
If you're going to use a hard drive directly connected to your iMac for backup, this is what I mentioned earlier: http://twelvesouth.com/products/backpack/ Great way to use space behind the iMac without adding something else to the desk top. You can buy it through Apple online/stores or Amazon, and there are probably other sources too.
For external hard drives, I like those sold by OWC at http://eshop.macsales.com/shop/firewire/ as many of them use Oxford chip sets, wihch work well with macs (I've used several for years with no issues). Most pre-packaged drive/cases have a 3 year warranty, although you can buy a case and add your own hard drive. I like Western Digital Scorpio Blacks that have a 5 year warranty.

Error: Disk Utility can't repair this disk.

My Server's non-boot volume, while using Disk Utility I get the message Volume bitmap needs minor repair for orphaned blocks. Then checking volume information. Invalid volume file count. It should be 472587 instead of 472588; Invalid bolume free block count. It should be 236325120 instead of 236325119. The volume was found corrupt and needs to be repaired. Volume repair complete. Updating boot support partitions for the volume required. Error: Disk Utility can't repair this disk.
I received this error a month ago and replaced the drive. It worked fine for a month, but now I receive the same message.

Did you restore from a time machine backup? If so, what i would suggest is doing an erase then reinstalling, do not restore from time machine during intail setup. Setup a fresh account then use migration assistant to restore from your backup.

TS1901 Disk Utility can't repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.

Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
*** ??? I need to take out the data from a WD320 that shows this error and then format the WD and put the data into again
THANKS !!!

I'm sorry, is there a question here? You seem to know precisely what you need to do…

Error disk utility can't repair this disk...disk and restore your backed-up files

I have been working on a project using an external hard disk. I used my Macbook Pro (2010) to create this project and files (about 31 GB). Now I am trying to open the disk on my iMac (2014) and it doesn't show up. I can see the HDD when I use disk utility but get this message when I try to repair/restore the disc:
"error disk utility can't repair this disk...disk and restore your backed-up files"
The funny thing is that the disk works absolutely fine with my Macbook Pro. What am I missing?
Imac :OSX 10.9.4 , 2.7 GHz Intel Core i5, 8 Gb Ram.

Nico,
Did you find a way?
This just happened to me too.
https://discussions.apple.com/thread/5981446
-John

Disk utility can't repair a partition on external hard drive

Similar Messages

Maybe you are looking for