Disk Utility Can't Verifty or Repair HDD!
I just tried to verify my HDD with Disk Utility (I put in the Mac OS X Install DVD and held C at startup), and it said:
Invalid node structure.
Volume check failed.
Error: Filesystem verify or repair failed.
Now when I tried to reboot my Macbook, the gray Apple comes up and so does the spinning wheel, but after a couple of minutes, it shuts down.
I've also tried Safe Boot but that didn't work.
Please help ASAP!
To repair your startup drive:
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger, and 4.1 for Leopard) and/or TechTool Pro (4.6.1 for Leopard) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Similar Messages
-
Disk Utility can't verify or repair hard drive
I started up my Tibook using the install disk and ran disk utility to try and repair my hard drive and it went through the verification process and then said that there was an error and it could not repair the disk. It says that it needs repaired, any suggestions?
Also, when I come back to my computer after being gone several hours, I'm having trouble getting the computer to respond. It's not supposed to go to sleep or go to screen saver, but when I come back, the programs take a long time to respond - any ideas on how to fix this?
thanks in advance.This is what Disk Utility says when I try to verify:
Verifying volume “Hard Drive”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Overlapped extent allocation (file 479297)
Overlapped extent allocation (file Overlapped extent allocation (file plications/Backup.app/Contents/Resources/Japanese.lproj/Backup Help/pgs/eco85.html)
Overlapped extent allocation (file 640270 /Applications/Backup.app/Contents/Resources/Japanese.lproj/Backup Help/pgs/eco9.html)
Overlapped extent allocation (file 640272 /Applications/Backup.app/Contents/Resources/Japanese.lproj/Backup Help/pgs2/dev.html)
Overlapped extent allocation (file 640273 /Applications/Backup.app/Contents/Resources/Japanese.lproj/Backup Help/pgs2/dw.html)
640273 /Applications/Backup.app/Contents/Resources/Japanese.lproj/Backup Help/pgs2/dw.html
ped extent allocation (file %@)",1)
640274 /Applications/Backup.app/Contents/Resources/Japanese.lproj/Backup Help/pgs2/kbshortcuts.html
Overlapped extent allocation (file 640275 /Applications/Backup.app/Contents/Resources/Japanese.lproj/Backup Help/pgs2/la.html)
Overlapped extent allocation (file 640276 /Applications/Backup.app/Contents/Resources/Japanese.lproj/Backup Help/pgs2/sp.html)
Overlapped extent allocation (file Overlapped extent allocation (file Japanese.lproj/Backup Help/pgs2/tips.html)
Overlapped extent allocation (file 640278 /Applications/Backup.app/Contents/Resources/Japanese.lproj/Backup Help/pgs2/toc01.html)
Overlapped extent allocation (file 640279 /Applications/Backup.app/Contents/Resources/Japanese.lproj/Backup Help/pgs2/toc02.html)
Overlapped extent allocation (file 640280 /Applications/Backup.app/Contents/Resources/Japanese.lproj/Backup Help/pgs2/toc03.html)
640280 /Applications/Backup.app/Contents/Resources/Japanese.lproj/Backup Help/pgs2/toc03.html
640281 /Applications/Backup.app/Contents/Resources/Japanese.lproj/Backup Help/pgs2/toc04.html
Overlapped extent allocation (file 640282 /Applications/Backup.app/Contents/Resources/Japanese.lproj/Backup Help/pgs2/toc06.html)
Overlapped extent allocation (file 640283 /Applications/Backup.app/Contents/Resources/Japanese.lproj/Backup Help/pgs2/tocstart.html)
Overlapped extent allocation (file Overlapped extent allocation (file /wn.html)
Overlapped extent allocation (file 640286 /Applications/Backup.app/Contents/Resources/Japanese.lproj/Backup Help/shrd/nav.js)
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Volume Bit Map needs minor repair
Checking volume information.
Invalid volume free block count
(It should be 2799915 instead of 2799941)
Volume Header needs minor repair
The volume Hard Drive needs to be repaired.
Error: The underlying task reported failure on exit
1 HFS volume checked
Volume needs repair -
Error disk utility can't repair this disk...disk and restore your backed-up files
I have been working on a project using an external hard disk. I used my Macbook Pro (2010) to create this project and files (about 31 GB). Now I am trying to open the disk on my iMac (2014) and it doesn't show up. I can see the HDD when I use disk utility but get this message when I try to repair/restore the disc:
"error disk utility can't repair this disk...disk and restore your backed-up files"
The funny thing is that the disk works absolutely fine with my Macbook Pro. What am I missing?
Imac :OSX 10.9.4 , 2.7 GHz Intel Core i5, 8 Gb Ram.Nico,
Did you find a way?
This just happened to me too.
https://discussions.apple.com/thread/5981446
-John -
After getting the dreaded gray/blue screen, I tried to run disk repair on the internal disk. I got an error message saying "Disk Utility can't repair this disk and restore your backed-up files. The volume Macintosh HD could not be verified completely." What do I do now? This is an iMac and I'm running 10.6.8.
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it. See below for how to clone a drive.
1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
with your computer. Insert the disc into the optical drive and restart the computer.
After the chime press and hold down the "C" key. Release the key when you see
a small spinning gear appear below the dark gray Apple logo.
2. After the installer loads select your language and click on the Continue
button. When the menu bar appears select Disk Utility from the Utilities menu.
After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
size.) Click on the Partition tab in the DU main window. Set the number of
partitions to one (1) from the Partitions drop down menu, click on Options button
and select GUID, click on OK, then set the format type to MacOS Extended
(Journaled, if supported), then click on the Apply button.
3. When the formatting has completed quit DU and return to the installer. Proceed
with the OS X installation and follow the directions included with the installer.
4. When the installation has completed your computer will Restart into the Setup
Assistant. Be sure you configure your initial admin account with the exact same
username and password that you used on your old drive. After you finish Setup
Assistant will complete the installation after which you will be running a fresh
install of OS X. You can now begin the update process by opening Software
Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
You may be able to backup your data if you have an erased external drive you can use. Before you do the above but after you have opened Disk Utility you can try to clone your drive:
Clone using Restore Option of Disk Utility
1. Open Disk Utility.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Select the destination volume from the left side list and drag
it to the Destination entry field.
5. Select the source volume from the left side list and drag it to
the Source entry field.
6. Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
Now this will only work if the drive is accessible and can be cloned by Disk Utility. Otherwise, you would need to access your drive from another Mac that you can connect via Firewire - Target Disk Mode. -
Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
*** ??? I need to take out the data from a WD320 that shows this error and then format the WD and put the data into again
THANKS !!!I'm sorry, is there a question here? You seem to know precisely what you need to do…
-
Can I fix a disk with this message?
Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.Some problems can indeed be fixed this way. But working from Recovery_HD or Disk Warrior DVDs and working in the restricted environment those provide can be difficult. You can literally spend days working on this problem (while your regular work is unavailable) only to discover the old drive is unsalvageable.
There is no way to know up front whether you are facing a major Hardware failure or a minor software glitch, or something in between. Often you are forced to work from the drive you no longer trust. I continue to recommend you do this work from a different, fully functioning Mac OS X booted from a different drive.
If you have had the foresight to (as The hatter often recommends) clone your virgin install onto another drive for use in such situations, you will be able to recover from such problems in record time. If not, my previous recommendations stands:
Buy a new Drive. Or two. Install Mac OS X from scratch on a new drive, and get your Mac running again. Later, you can use the full power of Mac OS X to attempt to rescue your data, if needed. Then Zero the old drive, to see if it can hold data again reliably.
If the old drive eventually provides some needed data, and is salvageable, Merry Christmas. -
"Disk Utility can't repair this disk...and restore the backed up files"
Hello, my macbook crashed a few days a go as well and after going to the recovery drive and OX Utilities tried to verify and repair disk it gives me this error "Disk Utility can't repair this disk...and restore the backed up files" is the second time that occurs after replacing the hard drive for a new SSD, i thought my problem was solved and is not. Any Ideas? the only other thing i can think of is the logic board?
Backup your files and arrange for an appointment at an Apple store genius bar for a free evaluation.
Ciao. -
My computer is shutting down before fully booting up. I am running the disk utilities program and have this message: Error: Disk Utility can't repair this disk . . . disk, and restore your backed-up files. Can anyone suggest what I should do next?
So, you can't Install OSX to the external?
Or you can't boot from it when you do?
You're not the only one wondering... I'm reminded of the Goose that laid the Golden Egg story. -
Disk Utility can't repair this disk...disk, and restore your backuped-up file.
Computer got uber slow.
I started to worry.
Now computer won't start.
VERY worried.
Tried to repair disk. Received error message above.
Any help would be greatly appreciated.sulaver wrote:
Computer got uber slow.
I started to worry.
Now computer won't start.
VERY worried.
Tried to repair disk. Received error message above.
Any help would be greatly appreciated.
You can't have received an error message "Disk Utility can't repair this disk...disk, and restore your backuped-up file." since that is pure gobbledegook and isn't even good English.
What may have happened is that
(a) your hard drive has become so full that the operating system can't find any space in which to.... operate.
(b) as macjack says, it has crashed - possibly as a result of (a).
(c) you have been allowing Time Machine to back up to your internal hard drive instead of to a backup disk, which has caused (a) to happen. -
External Hard Drive Disk Utility Can't Repair the Disk
Hi,
I have a Seagate 1 TB Backup Plus Drive which was working perfectly fine until I plugged it into a USB hub. It detected it while in the hub and I was able to get files off of it, but when I ejected it from the hub and put it back into the USB slot on the computer it was not detected by finder. It shows up in the disk utility and I clicked verify and repair and it says:
Verify and Repair volume “Seagate Backup Plus Drive”
Checking file system
Volume repair complete.
Updating boot support partitions for the volume as required.
Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
Is there any way to get this to work properly again? Or if not is there a way for me to recover my files on the external hard drive?
Thanks
I have a Macbook PRO late 2011 running OS X Mavericks.Use a more powerful utility such as DiskWarrior, or a product such as those listed here.
(108710) -
Disk Utility can't repair permissions
For the first time I neglected to repair permissions before security upgrade and now I find I can no longer repair permissions. Everything goes as normal until about 75% done and then it just freezes. I have tried running it from the install CD but it does the same. I used the disk repair and got this error message;
ERROR: The underlying task reported failure on exit (~9972)
1 Volume could not be repaired.
Computer otherwise OK. AHT reported all OK.
Is this the start of an HD failure or some querky software malfunction? Help needed!
G4 867 MDD Mac OS X (10.3.9) Extra 120Gb HD, 1.75Gb SDRAM LG 4163B SuperdriveIf my HD has developed a bad sector then surely a clone will not work?
My best guess is that the cloning would fail when it tried to access the data that's referenced in the bad directory node. I've had similar problems when trying to copy files when there were directory problems. You may not have a bad sector per se, but certainly the directory record is damaged in such a way that Disk Utility can't reconstruct the record.
If I moved all my APPS folder to another HD and then did a Zero and format on this one could I then still use the APPS folder with a new install by repairing permissions?
You have to remember that apps store files in other locations - particularly in the /Library, /System/Library/ and /Users/username/Library directories. While you can copy the Applications directory to another drive, you're liable to miss supporting files the apps are going to look for. Since there's no real way to determine what the damaged directory is referencing, you'd be chancing something's going to get missed and leave you with apps that won't run. The only way I've ever been able to find what directory erorrs were pointing to was to copy files to another drive one chunk at a time until I found the offending directory and then narrow down the search by copying files individually. Given the nature of OS X to store files in directories that are otherwise hidden from the user, this can be a complicated and tedious process.
Since Disk Utility running from the install disk can't repair the damaged directoy record, I'd go to the Disk Warrior repair strategy next.
-Douggo -
Disk Utility can't repair TM backup disk
Hello all
Recently, my external backup disk (a 750 GB WD My Passport) that I use with Time Machine has been acting up. At first, it wouldn't show up on the desktop, but was being recognized in Disk Utility (with the "Time Machine Backup" partition greyed out). After multiple restarts and unplugging/replugging the hard drive, I finally got to be properly recognized, i.e. it showed up on the desktop with the proper Time Machine hard drive icon. So I thought the problem was gone and started a routine backup. However, Time Machine returned an error:
"Unable to complete backup. An error occurred while creating the backup folder."
I search the forums, and followed the advice here: http://web.me.com/pondini/Time_Machine/C10.html
I tried repairing the disk, but DU couldn't repair it:
Verify and Repair volume “Time Machine Backups”
Checking Journaled HFS Plus volume.
Detected a case-sensitive volume.
Checking extents overflow file.
Checking catalog file.
Incorrect number of thread records
Checking multi-linked files.
Checking catalog hierarchy.
Checking extended attributes file.
Checking multi-linked directories.
Checking volume bitmap.
Checking volume information.
Invalid volume file count
(It should be 3991498 instead of 3904049)
Invalid volume directory count
(It should be 678218 instead of 673790)
Invalid volume free block count
(It should be 9588404 instead of 11784378)
Volume header needs minor repair
The volume Time Machine Backups was found corrupt and needs to be repaired.
Volume repair complete.Updating boot support partitions for the volume as required.
Error: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
So now I'm still following the advice on the above mentioned page by posting on here. Any help at all would be greatly appreciated. I am using a 2010 15in 2.66 i7 MBP, if that makes a difference, although my guess is the problem's with the harddrive itself. I think there may have been one time about a month ago when Time Machine stopped responding (or something like that) which forced me to pull out the harddrive, possibly corrupting the data. But I'm not sure, and I do recall making at least one successful backup after that. Well, actually TM confirms this: "Latest successful backup: 5/27/11 at 11:51 PM". So I have no idea what's going on. Again, any help would be appreciated.You can't tell what's corrupted or where. Time Machine backups have a very complex structure, all linked together. So, you can often do new backups, or restore individual items, or even entire backups, as long as you don't stumble over the damage.
There's a chance a heavy-duty 3rd-party disk repair app, such as Disk Warrior, can repair them. It's about $100, and probably a good investment for the future, but there's no guarantee it can fix them.
If not, or if you don't want to spend the money, your only option is to erase the disk and let Time Machine start fresh.
It sounds like you may have other data on it; if that's in the same partition, that's not a good idea. This is a good time to copy the data off, erase the disk, and make 2 (or more) partitions on it, so Time Machine has its own, exclusive space. See #3 in Time Machine - Frequently Asked Questions for details and instructions. -
Disk utility can't repair a partition on external hard drive
I have a 1TB Western Digital external FW drive that's only a couple years old (2 or 3, probably). I have it split into partitions, one of which I'm using for Time Machine. The non-Time Machine partition checked out fine with DIsk Utility, but when I ran Disk Utility on the Time Machine partition, I received this message:
Disk Utility stopped reparing "Time Machine." Disk Utility can't repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
Does this mean the drive itself is failing? I erased the Time Machine partition and recreated it through Disk Utility, and then I verified it. Everything checked out okay, but I want to make sure, especially since I'm hosting my iTunes music in the other partition (it's backed up to a 2nd external drive, so if the drive does die, at least I don't lose everything).
Before this problem happened, both partitions dropped off the Finder and the light on the drive went off. I unplugged the drive and plugged it back in again a couple times, but nothing happened. Finally, the light went back on after plugging it back in for the 3rd or 4th time, but I'm wondering if the drive could be going bad, which would surprise me since it isn't very old.Brad Cook wrote:
Disk Utility stopped reparing "Time Machine." Disk Utility can't repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
Does this mean the drive itself is failing?
Possibly, but not necessarily. The File System on the disk was so badly corrupted that Disk Utility couldn't fix it. That might indicate a problem with the drive. It's not unusual for consumer-quality (ie, inexpensive) drives to fail after 2-3 years, although many will run for several years. It's a bit of a crapshoot.
Before this problem happened, both partitions dropped off the Finder and the light on the drive went off.
Whatever caused that is another good possibility -- if a drive is improperly disconnected, OSX can't "close it out" properly, and that can cause damage to the file system. Sometimes Disk Utility can fix it, sometimes it can't. And sometimes heavy-duty 3rd-party disk repair apps like DiskWarrior can fix things Disk Utility can't.
A power dip or spike could have caused it, or an overheated electronic component, etc. If it has it's own power supply, be sure it's on a good (ie, not cheap) surge protector or U.P.S. system.
Otherwise, keep an eye on it. If you don't have "secondary" backups, this would be an excellent time to get another drive for that purpose. See #27 in Time Machine - Frequently Asked Questions for some suggestions.
Bottom line: personally, I'd not trust my only backups to that drive.
(But then, I'd never trust my backups to any single drive, no matter how new or high-quality.) -
Disk Utility can't repair this disk
I have been having trouble booting. It started when I connected a router to it. It seemed to eat up the free disk space and I only have 77 MB left or something around that.
Anyway, I tried deleting files with command-s commands, and it worked one time and it freed up 2 GB of space. I restarted the computer and when I tried to start it up, it still got stuck in the gray screen with the whirly thing at the bottom. I checked the space and it was 77MB now.
I decided to boot from the Install Disk (Snow Leopard 10.6.0).
I checked Disk Utility first and verified the disk. It came up with the message:
"Error: Disk Utility can't repair this disk .... disk, and restore your backed-up files."
What should I do now?
I have the Mac HD volume on backup already so I don't have to do the back up stage.
Should I erase the disk while I am in Disk Utility?
And format it to Mac OS Extended Journal?
And then install the operating system again?
Thanks.To answer your questions, first, some other options...
If you fill your disk up that far, you are going to have problems. Don't ever do this, 10% is a bare minimum, you may need even more, depending on the size of your disc.
I have seen before where a disc repair utility couldn't perform its function simply because there was not enough slack space available on the drive. While I have never seen this with disc utility, it is possible that the disc is repairable as-is, if you could just free up a couple more gigs of space first.
Secondly, you could also try Disk Warrior, or to a lesser extent, Techtool Pro, or even iDefrag. I have personally never had Techtool Pro fix anything that Disk Utility or Disk Warrior couldn't fix, so I hesitate to even mention it, but I have had Disk Warrior and iDefrag clear up problems that Disk Utility either couldn't detect, or couldn't fix.
If you are still in dire straits, you should re-partition the drive using disk utility. This is the safest route, then go from there.
good luck!
-a -
In reference to question the computer gave no warning but lost internet connectivity. I shut down for a while and when returned it would only boot to gray logo screen with spinning gear. Ran disk utility and on Mac HD drive it stopped after "Updating boot support partitions as required". Then in red: Error: Disk utility can' repair this disk ....disk, and restore backed up files. I'm running OS X 10.8 and had just updated the iOS about three days ago. Not familiar with reformat process on MacBook Pro and would like some ideas whether I should go to the Genius Bar here in Sydney or try it on my own. I have been using time machine to back up to a 1TB La Cie drive right up to the crash. Thanks for any advice.
Well it turned out the drive was shot. Took it to the genius bar yesterday and they ran a test on the drive before trying the restore routine again. Drive failed.
Replaced the drive and got the MBP back today. Pretty quick and decent service once you get an appointment.
Now having trouble figuring how to do the Time Machine saved files. Have several applications which I'd like to keep but not sure how to trans the apps from my backup to the new. Hunting for answers on that on the web.
Thanks for you help, Eustace.
Maybe you are looking for
-
Trying to install Adobe PS without opening OS9
I am trying in install Adobe PS on my eMac 10.4.11 without launching OS9. I need to be able to print a postscript file but can't get it to work.
-
I installed Canon software on my macpro laptop and it takes forever to startup and shut down
Hello. I recently got a Canon Rebel T3 and in order to download photos to my macbook pro I had to install their software. Well, after installing it, it takes VERY long to shut down and start up my laptop. Can someone help? I already deleted the s
-
Issue in capturing in transit in SNP interactive planning book
Hi, We are facing issue in capturing in trasit in SNP interactive planning book. We are using standard planning area ( 9ASNP02) on which we have build up planning book which is copy of standard planning book. Earlier standard planning area was contai
-
Is there some download I need so that CS4 can open my RAW files? Thanks for your help. Esther
-
Can't install Authoware Web Player
Hello I am having issues installing Authorware Web Player. I have tried on numerous machines all running Windows XP with Internet Explorer 7. I install the product and then I go to the Authoware test page (also tried it through a Plato Science assign