Disk Utility Disk Repair
When I verify the hard drive using disk utility, it says it needs to be repaired. But when I start up from the install disk and run disk utility, trying to repair it, it says that the disk does not need to be repaired. But I'm still having problems getting my computer to read a CD I'm trying to upload. What should I do?
If you're referring to the same boot drive, that's possible.
It's extremely difficult to do a complete verification on the disk that you're running from; OSX has to temporarily stop some processes and do various other gyrations to check everything.
When you boot from the Install disc and do a +*Repair Disk,+* DU can check things much more easily. So if that says everything's ok, then everything's ok.
Similar Messages
-
Time machine backups are failing. I've followed the instructions I found on the Time Machine troubleshooting page (http://pondini.org/TM/Troubleshooting.html) but have gotten to where I don't know what to do next.
Sequence of events:
The main error message is always:
An error occurred while copying files. The problem could be temporary. If the problem persists, use Disk Utility to repair your backup disk.
Yesterday, I opened Disk Utility and verified the disk. Got this error:
Error: This disk needs to be repaired using the Recovery HD. Restart your computer, holding down the Command key and the R key until you see the Apple logo. When the OS X Utilities window appears, choose Disk Utility.
I ran Disk Utility and repaired the hard drive. Then I manually started the backup before going to bed, figuring it was going to take a long time to run. When I got up this morning, the backup had failed with the same "could be temporary" error. I checked the log, which says:
Starting manual backup
Attempting to mount network destination URL: afp://Tery%20Griffin;[email protected]/Tery%20Griffin's%20Time%20Ca psule
Mounted network destination at mount point: /Volumes/Tery Griffin's Time Capsule using URL: afp://Tery%20Griffin;[email protected]/Tery%20Griffin's%20Time%20Ca psule
Disk image /Volumes/Tery Griffin's Time Capsule/Tery Griffin’s Computer (44).sparsebundle mounted at: /Volumes/Time Machine Backups
Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
Event store UUIDs don't match for volume: Macintosh HD
Error: (-36) Applying backup protections to /Volumes/Time Machine Backups/Backups.backupdb/Tery Griffin’s Computer (44)/2014-03-05-201742.inProgress/ABB10CF2-F041-4DE5-B6AE-3C228B59ADCC
Error: (5) setxattr for key:com.apple.backupd.SnapshotStartDate path:/Volumes/Time Machine Backups/Backups.backupdb/Tery Griffin’s Computer (44)/2014-03-05-201742.inProgress/ABB10CF2-F041-4DE5-B6AE-3C228B59ADCC size:17
Error: (5) setxattr for key:com.apple.backupd.SnapshotState path:/Volumes/Time Machine Backups/Backups.backupdb/Tery Griffin’s Computer (44)/2014-03-05-201742.inProgress/ABB10CF2-F041-4DE5-B6AE-3C228B59ADCC size:2
Deep event scan at path:/ reason:must scan subdirs|new event db|
Finished scan
Found 145601 files (11.88 GB) needing backup
16.1 GB required (including padding), 620.77 GB available
Copied Zero KB of 11.88 GB, 0 of 145601 items
Copied 0 files (Zero KB) from volume Macintosh HD.
Copy stage failed with error:11
Backup failed with error: 11
Ejected Time Machine disk image: /Volumes/Tery Griffin's Time Capsule/Tery Griffin’s Computer (44).sparsebundle
Ejected Time Machine network volume.
Starting automatic backup
Attempting to mount network destination URL: afp://Tery%20Griffin;[email protected]/Tery%20Griffin's%20Time%20Ca psule
Mounted network destination at mount point: /Volumes/Tery Griffin's Time Capsule using URL: afp://Tery%20Griffin;[email protected]/Tery%20Griffin's%20Time%20Ca psule
Disk image /Volumes/Tery Griffin's Time Capsule/Tery Griffin’s Computer (44).sparsebundle mounted at: /Volumes/Time Machine Backups
Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
Event store UUIDs don't match for volume: Macintosh HD
Error: (-36) Applying backup protections to /Volumes/Time Machine Backups/Backups.backupdb/Tery Griffin’s Computer (44)/2014-03-05-201742.inProgress/9F8E7957-9C50-49C3-8314-880E5203E3D9
Error: (5) setxattr for key:com.apple.backupd.SnapshotStartDate path:/Volumes/Time Machine Backups/
Does anyone know what the problem is here and what I should do?
Thanks,
TeryYou have repaired your boot drive (which is good) but have you repaired your time machine drive? I don't own a Time Capsule so I don't know if disk utility can operate on it. If it can, you should repair it as well. You may need to erase it and start a new backup. That happens to time machine volumes from time to time and is why people who are serious about their data never rely on a single source of backup.
-
Phantom restarts / crashes with Maverick. Under restore Disk Utility, disk can't be repaired says "live system repair is not supported" Is there a fix yet? Or is Maverick "FREE" because Apple no longer offers free phone support?
Get onto the integrated iOS + Mac OS and end support for "legacy" Mac 10.8 and earlier.
Force older hardware users like me to upgrade to new hardware which is where $$ are.
Make apps work across tablets, phone, and computer with similar (though not the "same" app, but able to read and use the same file format).
Simplify.
I don't think anyone incl. Microsoft knew Windows 8.1 was going to be a free upgrade, I didn't and read that it would be more like $30.
No OS is ready for everyone on the day it is launched. iOS 7 is now 7.04 and climbing, Mac OS tends to really not be ready until the last patch and version is out, often a year or more after it was first issued. Ship it, then plan to fix the bugs left in or that surface.
www.macperformanceguide.com is saying "No" to Maverick for now. Of course there will be no "No" on new Mac Pro 2013 6,1 when those ship (Late Jan? ) -
DISK UTILITY STOPPED REPAIRING MACINTOSH HD!
So initially, my mac just was stuck on the white screen with grey apple logo and the spinning wheel. It wouldn't move! So I held down the power button and turned it off, let it rest for good 8 hours, turned it back on and it was still the same! With the help of some online postings: command + control + p + r, I got to the Disk Utility page and I tried checking for any damage. For most part everything was"ok" or "clear"! Then I ran 'VERIFY DISK' for MACINTOSH HD and some problems occurred. I clicked on 'REPAIR DISK' as promted. It said "DISK UTILITY STOPPED REPAIRING MACINTOSH HD: Disk Utitlity can't repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
I HAVE ABSOLUTELY NO IDEA HOW TO DO THAT ! I have not backed up a single thing on my mac!If you want to preserve the data on the boot drive, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data, you can skip this step.
There are several ways to back up a Mac that is unable to fully boot. You need an external hard drive to hold the backup data.
1. Boot from the Recovery partition or from a local Time Machine backup volume (option key at startup.) Launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
2. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
3. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data. -
Disk Utility stopped repairing Mac HD - Now what?
My computer has been running slow so I cleaned up my desktop, trashed a bunch of old files and went to verify permissions. I was then told to use disk repair.
In the middle of doing so I got this message - "Disk Utility stopped repairing 'Macintosh HD'. Disk Utility can't repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files."
Besides occasional slowness, my computer is working fine and I was able to get back to my desktop. Is this slow down issue going to get progressively worse if I don't reformat the disk? Should I do what the message says? If so, how? I've never reformatted before...it sounds a little scary.
I back up about once a week (just did so this morning) so I should be good to go there. I have AppleCare. Is this something I should bring the computer in for or can I fix this issue on my own?
Thanks in advance for any help.Do as instructed. Get your self a backup drive if you don't have one. Backup your files. Then erase your OS X volume and reinstall Mountain Lion.
Install or Reinstall Lion/Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
the Security button and set the Zero Data option to one-pass. Click on
the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion/Mountain Lion and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless. -
I followed all of the directions after seeing that my laptop flashed the folder with the question mark. But when I went to disk utility to repair/ verify issues w/ start up disk it would not allow me to. The buttons to repair and modify we're there but they were grey and couldn't be pressed.
Were you trying to repair the disk you were booted from? You can't do that - you need to boot from your install disk, and choose 'Disk Utility' from the 'install' menu.
-
Disk utility - disk repair permissions
I recently upgraded from OSX Tiger to Snow Leopard and also upgraded Firefox to 20.0, but have kept Safari as the default browser. Ever since, it doesn't take long for everything to slow down especially the 'net. I use disk utility to repair disk permissions (almost daily!) which helps. This takes about an hour. The problem seems to be in the System Library Core Services; e.g under Remote Management Resources Library it should be "drwxr-xr-x" but is "-rwxr-xr-x" and so on down the line including System Library Frameworks, Java..... What caused this and what can I do to get back to proper functioning?
I use disk utility to repair disk permissions (almost daily!) which helps.
No it doesn't. That's a complete waste of time.
First, back up all data immediately, as your boot drive might be failing.
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
Otherwise, take the steps below when you notice the problem.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
Step 2
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long. -
have a mac book pro that crashed. ran disk utility to repair. comp booted and ran for short time. then crashed. ran repair again. disk utility said it could not repair disk and needed to format and start again.
comp said it could not unmount disk and now when comp trys to boot all i get is a question mark on the screen. helpErase and Install
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Quit DU after formatting completes and return to the installer. Install Snow Leopard.
5. After restart into Snow Leopard download and install Mac OS X 10.6.8 Update Combo v1.1. -
I recently starting receiving the error message "Time Machine couldn't complete the backup to... An erro occurred while copying files. The problem may be temporary. If the problem persists, use Disk Utility to repair your backup disk. I have had no problems backing up my MacBook Pro 2011 to my Western Digital My Book Live through a Linksys EA4500 router until recently. I've made no major changes. I've ran a diagnosis on my back up drive with no problems. The Time Machine back up starts, but about after about 5 to 10 minutes I get the error message. I can see the shared drive in Finder. The light on the drive blinks while it starts the back up. I can see the shared folders on the networked drive. The backup process starts but for some reason it just stops. Can anyone help?
You can't repair a network volume in Disk Utility.
Backing up to a third-party NAS with Time Machine is risky, and unacceptably risky if it's your only backup. I know this isn't the answer you want, and I also know that the manufacturer says the device will work with Time Machine, and that it usually seems to work. Except when you try to restore, and find that you can't.
If you want network backup with Time Machine, use as the destination either an Apple Time Capsule or an external hard drive connected to another Mac or to an 802.11ac AirPort base station. Only the 802.11ac base stations support Time Machine, not any older model.
If you're determined to keep using the NAS for backup, your only recourse for any problems that result is to the manufacturer (which will blame Apple.) -
Disk Utility stops repairing Time Capsule backup with no info
After having problems backing up to a long-term stable backup on TC, I have tried using Disk Utility to repair the sparsebundle.
The repair begins, but never finishes. And no details are left in DU to decode what happened.
Does this mean sparsebundle corrupt? Or a problem with DU?Sugith Varughese wrote:
Wow, DU by ethernet IS much faster than wireless!
Unfortunately, DU said the sparse bundle was okay, but when I tried another TC backup, it failed again.
I assume this means there's no option but to delete the sparse bundle and start again?
No. There may be nothing at all wrong with the TC or sparse bundle. We need to know why it failed. Without the actual message(s), we're shooting in the dark. Start with #C2 in Time Machine - Troubleshooting. It will show you how to locate the message(s) that describe the problem, then help you fix it.
If that doesn't help, post back with details, including all the messages, your setup, what you've done, and the results. -
Disk Utility: Can Repair Permissions = no. Why?
Disk Utility: Can Repair Permissions = no
Why?It might help a little more if you would explain your situation enough so that people can make a guess what the problem might be. My guess is that the Repair Permissions button is grayed out - you can only repair permissions on a volume that has OSX installed on it. See http://docs.info.apple.com/article.html?artnum=106712 for more information.
-
Here's the log of my Macbook Pro, as I'm using a chinese version,
so log can only appear as below.
Reason I try to use Disk Utility's Repair is because the finder got not respond so ofter, it happen after my unscuessful power loss issues happen at home, before I doing Disk Utility's Repair I have try to build another admin account and guest user to reslove the ifnder not respond problem and it fix......
I'm sure problem was cause after using Disk Utility's Repair tool..
Now I can turn on by using Safy mode, just can't plugin USB =(
Anyone can help for solving, thanks a lot
Disk Utility's Repair log
磁碟工具程式 as Disk Utility's Repair
2011-05-28 14:58:27 +1000: “磁碟工具程式”已啟動。
2011-05-28 14:58:45 +1000: “磁碟工具程式”已啟動。
2011-06-08 04:45:07 +1000: “磁碟工具程式”已啟動。
2011-07-07 01:21:13 +1000: “磁碟工具程式”已啟動。
2012-07-18 17:12:15 +1000: “磁碟工具程式”已啟動。
2012-07-18 17:12:34 +1000: “磁碟工具程式”已啟動。
2012-07-18 17:13:02 +1000: 正在修復“Macintosh HD”的權限
2012-07-18 17:13:10 +1000: “Library”上的權限不同,應該為 drwxrwxr-t ,它們為 drwxrwxr-x 。
2012-07-18 17:13:10 +1000: 已修復“Library”。
2012-07-18 17:13:58 +1000: “System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/zh_TW.lproj/RemoteDesktopMenu.nib” 上的權限不同,應該為 drwxr-xr-x ,它們為 -rw-r--r-- 。
2012-07-18 17:13:58 +1000: 已修復“System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/zh_TW.lproj/RemoteDesktopMenu.nib” 。
2012-07-18 17:13:58 +1000: “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/zh_TW.lproj/UIAgent.nib”上的權限不同,應該為 drwxr-xr-x ,它們為 -rw-r--r-- 。
2012-07-18 17:13:58 +1000: 已修復“System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/ Remote Desktop Message.app/Contents/Resources/zh_TW.lproj/UIAgent.nib”。
2012-07-18 17:13:58 +1000: “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/zh_TW.lproj/MainMenu.nib”上的權限不同,應該為 drwxr-xr-x ,它們為 -rw-r--r-- 。
2012-07-18 17:13:58 +1000: 已修復“System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents /Support/LockScreen.app/Contents/Resources/zh_TW.lproj/MainMenu.nib”。
2012-07-18 17:13:58 +1000: “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/zh_TW.lproj/MainMenu.nib”上的權限不 同,應該為 drwxr-xr-x ,它們為 -rw-r--r-- 。
2012-07-18 17:13:58 +1000: 已修復“System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents /Support/LockScreenLeopard386.app/Contents/Resources/zh_TW.lproj/MainMenu.nib”。
2012-07-18 17:14:05 +1000: “System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/zh_CN.lproj/RemoteDesktopMenu.nib” 上的權限不同,應該為 drwxr-xr-x ,它們為 -rw-r--r-- 。
2012-07-18 17:14:05 +1000: 已修復“System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/zh_CN.lproj/RemoteDesktopMenu.nib” 。
2012-07-18 17:14:06 +1000: “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/zh_CN.lproj/UIAgent.nib”上的權限不同,應該為 drwxr-xr-x ,它們為 -rw-r--r-- 。
2012-07-18 17:14:06 +1000: 已修復“System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/ Remote Desktop Message.app/Contents/Resources/zh_CN.lproj/UIAgent.nib”。
2012-07-18 17:14:06 +1000: “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/zh_CN.lproj/MainMenu.nib”上的權限不同,應該為 drwxr-xr-x ,它們為 -rw-r--r-- 。
2012-07-18 17:14:06 +1000: 已修復“System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents /Support/LockScreen.app/Contents/Resources/zh_CN.lproj/MainMenu.nib”。
2012-07-18 17:14:06 +1000: “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/zh_CN.lproj/MainMenu.nib”上的權限不 同,應該為 drwxr-xr-x ,它們為 -rw-r--r-- 。
2012-07-18 17:14:06 +1000: 已修復“System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents /Support/LockScreenLeopard386.app/Contents/Resources/zh_CN.lproj/MainMenu.nib”。
2012-07-18 17:14:40 +1000: “System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/ko.lproj/RemoteDesktopMenu.nib”上的權 限不同,應該為 drwxr-xr-x ,它們為 -rw-r--r-- 。
2012-07-18 17:14:40 +1000: 已修復“System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/ko.lproj/RemoteDesktopMenu.nib”。
2012-07-18 17:14:40 +1000: “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/ko.lproj/UIAgent.nib”上的權限不同,應該為 drwxr-xr-x ,它們為 -rw-r--r-- 。
2012-07-18 17:14:40 +1000: 已修復“System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/ Remote Desktop Message.app/Contents/Resources/ko.lproj/UIAgent.nib”。
2012-07-18 17:14:40 +1000: “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/ko.lproj/MainMenu.nib”上的權限不同,應該為 drwxr-xr-x ,它們為 -rw-r--r-- 。
2012-07-18 17:14:40 +1000: 已修復“System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents /Support/LockScreen.app/Contents/Resources/ko.lproj/MainMenu.nib”。
2012-07-18 17:14:40 +1000: “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/ko.lproj/MainMenu.nib”上的權限不同,應 該為 drwxr-xr-x ,它們為 -rw-r--r-- 。
2012-07-18 17:14:40 +1000: 已修復“System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents /Support/LockScreenLeopard386.app/Contents/Resources/ko.lproj/MainMenu.nib”。
2012-07-18 17:15:02 +1000: “System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/Dutch.lproj/RemoteDesktopMenu.nib” 上的權限不同,應該為 drwxr-xr-x ,它們為 -rw-r--r-- 。
2012-07-18 17:15:03 +1000: 已修復“System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/Dutch.lproj/RemoteDesktopMenu.nib” 。
2012-07-18 17:15:03 +1000: “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/Dutch.lproj/UIAgent.nib”上的權限不同,應該為 drwxr-xr-x ,它們為 -rw-r--r-- 。
2012-07-18 17:15:03 +1000: 已修復“System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/ Remote Desktop Message.app/Contents/Resources/Dutch.lproj/UIAgent.nib”。
2012-07-18 17:15:03 +1000: “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/Dutch.lproj/MainMenu.nib”上的權限不同,應該為 drwxr-xr-x ,它們為 -rw-r--r-- 。
2012-07-18 17:15:03 +1000: 已修復“System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents /Support/LockScreen.app/Contents/Resources/Dutch.lproj/MainMenu.nib”。
2012-07-18 17:15:03 +1000: “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/Dutch.lproj/MainMenu.nib”上的權限不 同,應該為 drwxr-xr-x ,它們為 -rw-r--r-- 。
2012-07-18 17:15:03 +1000: 已修復“System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents /Support/LockScreenLeopard386.app/Contents/Resources/Dutch.lproj/MainMenu.nib”。
2012-07-18 17:15:10 +1000: “System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/Italian.lproj/RemoteDesktopMenu.ni b”上的權限不同,應該為 drwxr-xr-x ,它們為 -rw-r--r-- 。
2012-07-18 17:15:10 +1000: 已修復“System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/Italian.lproj/RemoteDesktopMenu.ni b”。
2012-07-18 17:15:10 +1000: “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/Italian.lproj/UIAgent.nib”上的權限不同,應該為 drwxr-xr-x ,它們為 -rw-r--r-- 。
2012-07-18 17:15:10 +1000: 已修復“System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/ Remote Desktop Message.app/Contents/Resources/Italian.lproj/UIAgent.nib”。
2012-07-18 17:15:10 +1000: “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/Italian.lproj/MainMenu.nib”上的權限不同,應該為 drwxr-xr-x ,它們為 -rw-r--r-- 。
2012-07-18 17:15:10 +1000: 已修復“System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents /Support/LockScreen.app/Contents/Resources/Italian.lproj/MainMenu.nib”。
2012-07-18 17:15:10 +1000: “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/Italian.lproj/MainMenu.nib”上的權 限不同,應該為 drwxr-xr-x ,它們為 -rw-r--r-- 。
2012-07-18 17:15:10 +1000: 已修復“System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents /Support/LockScreenLeopard386.app/Contents/Resources/Italian.lproj/MainMenu.nib” 。
2012-07-18 17:15:20 +1000: “System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/Spanish.lproj/RemoteDesktopMenu.ni b”上的權限不同,應該為 drwxr-xr-x ,它們為 -rw-r--r-- 。
2012-07-18 17:15:20 +1000: 已修復“System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/Spanish.lproj/RemoteDesktopMenu.ni b”。
2012-07-18 17:15:20 +1000: “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/Spanish.lproj/UIAgent.nib”上的權限不同,應該為 drwxr-xr-x ,它們為 -rw-r--r-- 。
2012-07-18 17:15:20 +1000: 已修復“System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/ Remote Desktop Message.app/Contents/Resources/Spanish.lproj/UIAgent.nib”。
2012-07-18 17:15:20 +1000: “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/Spanish.lproj/MainMenu.nib”上的權限不同,應該為 drwxr-xr-x ,它們為 -rw-r--r-- 。
2012-07-18 17:15:20 +1000: 已修復“System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents /Support/LockScreen.app/Contents/Resources/Spanish.lproj/MainMenu.nib”。
2012-07-18 17:15:20 +1000: “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/Spanish.lproj/MainMenu.nib”上的權 限不同,應該為 drwxr-xr-x ,它們為 -rw-r--r-- 。
2012-07-18 17:15:20 +1000: 已修復“System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents /Support/LockScreenLeopard386.app/Contents/Resources/Spanish.lproj/MainMenu.nib” 。
2012-07-18 17:15:28 +1000: “System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/French.lproj/RemoteDesktopMenu.nib ”上的權限不同,應該為 drwxr-xr-x ,它們為 -rw-r--r-- 。
2012-07-18 17:15:28 +1000: 已修復“System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/French.lproj/RemoteDesktopMenu.nib ”。
2012-07-18 17:15:28 +1000: “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/French.lproj/UIAgent.nib”上的權限不同,應該為 drwxr-xr-x ,它們為 -rw-r--r-- 。
2012-07-18 17:15:28 +1000: 已修復“System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/ Remote Desktop Message.app/Contents/Resources/French.lproj/UIAgent.nib”。
2012-07-18 17:15:28 +1000: “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/French.lproj/MainMenu.nib”上的權限不同,應該為 drwxr-xr-x ,它們為 -rw-r--r-- 。
2012-07-18 17:15:28 +1000: 已修復“System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents /Support/LockScreen.app/Contents/Resources/French.lproj/MainMenu.nib”。
2012-07-18 17:15:28 +1000: “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/French.lproj/MainMenu.nib”上的權限 不同,應該為 drwxr-xr-x ,它們為 -rw-r--r-- 。
2012-07-18 17:15:28 +1000: 已修復“System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents /Support/LockScreenLeopard386.app/Contents/Resources/French.lproj/MainMenu.nib”。
2012-07-18 17:15:36 +1000: “System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/German.lproj/RemoteDesktopMenu.nib ”上的權限不同,應該為 drwxr-xr-x ,它們為 -rw-r--r-- 。
2012-07-18 17:15:36 +1000: 已修復“System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/German.lproj/RemoteDesktopMenu.nib ”。
2012-07-18 17:15:36 +1000: “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/German.lproj/UIAgent.nib”上的權限不同,應該為 drwxr-xr-x ,它們為 -rw-r--r-- 。
2012-07-18 17:15:36 +1000: 已修復“System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/ Remote Desktop Message.app/Contents/Resources/German.lproj/UIAgent.nib”。
2012-07-18 17:15:36 +1000: “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/German.lproj/MainMenu.nib”上的權限不同,應該為 drwxr-xr-x ,它們為 -rw-r--r-- 。
2012-07-18 17:15:36 +1000: 已修復“System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents /Support/LockScreen.app/Contents/Resources/German.lproj/MainMenu.nib”。
2012-07-18 17:15:36 +1000: “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/German.lproj/MainMenu.nib”上的權限 不同,應該為 drwxr-xr-x ,它們為 -rw-r--r-- 。
2012-07-18 17:15:36 +1000: 已修復“System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents /Support/LockScreenLeopard386.app/Contents/Resources/German.lproj/MainMenu.nib”。
2012-07-18 17:15:44 +1000: “System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/Japanese.lproj/RemoteDesktopMenu.n ib”上的權限不同,應該為 drwxr-xr-x ,它們為 -rw-r--r-- 。
2012-07-18 17:15:44 +1000: 已修復“System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/Japanese.lproj/RemoteDesktopMenu.n ib”。
2012-07-18 17:15:45 +1000: “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/Japanese.lproj/UIAgent.nib”上的權限不同,應該為 drwxr-xr-x ,它們為 -rw-r--r-- 。
2012-07-18 17:15:45 +1000: 已修復“System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/ Remote Desktop Message.app/Contents/Resources/Japanese.lproj/UIAgent.nib”。
2012-07-18 17:15:45 +1000: “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/Japanese.lproj/MainMenu.nib”上的權限不同,應該為 drwxr-xr-x ,它們為 -rw-r--r-- 。
2012-07-18 17:15:45 +1000: 已修復“System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents /Support/LockScreen.app/Contents/Resources/Japanese.lproj/MainMenu.nib”。
2012-07-18 17:15:45 +1000: “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/Japanese.lproj/MainMenu.nib”上的 權限不同,應該為 drwxr-xr-x ,它們為 -rw-r--r-- 。
2012-07-18 17:15:45 +1000: 已修復“System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents /Support/LockScreenLeopard386.app/Contents/Resources/Japanese.lproj/MainMenu.nib ”。
2012-07-18 17:17:05 +1000: “System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/English.lproj/RemoteDesktopMenu.ni b”上的權限不同,應該為 drwxr-xr-x ,它們為 -rw-r--r-- 。
2012-07-18 17:17:05 +1000: 已修復“System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/English.lproj/RemoteDesktopMenu.ni b”。
2012-07-18 17:17:06 +1000: 警告:SUID 檔“System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDA gent”已修改,且將不會進行修復。
2012-07-18 17:17:06 +1000: “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/English.lproj/UIAgent.nib”上的權限不同,應該為 drwxr-xr-x ,它們為 -rw-r--r-- 。
2012-07-18 17:17:06 +1000: 已修復“System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/ Remote Desktop Message.app/Contents/Resources/English.lproj/UIAgent.nib”。
2012-07-18 17:17:06 +1000: “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/English.lproj/MainMenu.nib”上的權限不同,應該為 drwxr-xr-x ,它們為 -rw-r--r-- 。
2012-07-18 17:17:06 +1000: 已修復“System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents /Support/LockScreen.app/Contents/Resources/English.lproj/MainMenu.nib”。
2012-07-18 17:17:06 +1000: “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/English.lproj/MainMenu.nib”上的權 限不同,應該為 drwxr-xr-x ,它們為 -rw-r--r-- 。
2012-07-18 17:17:06 +1000: 已修復“System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents /Support/LockScreenLeopard386.app/Contents/Resources/English.lproj/MainMenu.nib” 。
2012-07-18 17:17:12 +1000: “System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/libruby.dylib”上的 權限不同,應該為 lrwxrwxrwx ,它們為 lrwxr-xr-x 。
2012-07-18 17:17:12 +1000: 已修復“System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/libruby.dylib ”。
2012-07-18 17:17:47 +1000: “usr/libexec/cups/backend/fax”上的權限不同,應該為 lrwx------ ,它們為 lrwxr-xr-x 。
2012-07-18 17:17:47 +1000: 已修復“usr/libexec/cups/backend/fax”。
2012-07-18 17:17:52 +1000: “Library/Application Support/Apple/ParentalControls”上的權限不同,應該為 drwxrwxr-x ,它們為 drwxr-xr-x 。
2012-07-18 17:17:52 +1000: 已修復“Library/Application Support/Apple/ParentalControls”。
2012-07-18 17:17:52 +1000: “Library/Application Support/Apple/ParentalControls/ALRHelperJobs”上的權限不同,應該為 drwxrwxr-x ,它們為 drwxr-xr-x 。
2012-07-18 17:17:52 +1000: 已修復“Library/Application Support/Apple/ParentalControls/ALRHelperJobs”。
2012-07-18 17:18:12 +1000:
2012-07-18 17:18:12 +1000: 權限修復完成
2012-07-18 17:18:12 +1000:
2012-07-18 17:18:13 +1000:
2012-07-18 22:19:33 +1000: “磁碟工具程式”已啟動。
2012-07-18 22:21:36 +1000: “磁碟工具程式”已啟動。
2012-07-18 22:22:34 +1000: “磁碟工具程式”已啟動。
2012-07-18 22:22:47 +1000: 正在製作映像檔“Macintosh HD.dmg”
2012-07-18 22:22:55 +1000: 正在準備用來製作映像檔的引擎⋯
2012-07-18 22:23:03 +1000: 正在讀取整個磁碟 (Apple_HFS : 0)⋯I called Apple Support after getting no usuable help through the Apple Forums. The rep felt is was a problem with the two older USB 2.0 drives compatablility with the Retina Macbook Pro's USB 3.0. He kindly offered to send me a Compatable USB 3.0 Drive, but could not offer a solution.
FYI, I tried using different cords and both USB 3.0 ports on my Retina MacBook Pro and both are self powered.
Thanks,
Chris -
I have a MacBook Pro 2.8 GHz Intel Core 2 Duo with 4GB, 500GB HDD, running 10.8.2 My computer as been running slow and fearing my HDD might die. I bought a brand new 1TB G-Drive from Apple yesterday and started my back up. It gets to just over 22GB backed up then I get this error message:
"An error occurred while copying files. The problem may be temporary. If the problem persists, use Disk Utility to repair your backup disk."
Anyone out there who might be able to help me fix this?I have a MacBook Pro 2.8 GHz Intel Core 2 Duo with 4GB, 500GB HDD, running 10.8.2 My computer as been running slow and fearing my HDD might die. I bought a brand new 1TB G-Drive from Apple yesterday and started my back up. It gets to just over 22GB backed up then I get this error message:
"An error occurred while copying files. The problem may be temporary. If the problem persists, use Disk Utility to repair your backup disk."
Anyone out there who might be able to help me fix this? -
Disk Utility to repair Disk???
ok, SO I have attempted installing Windows Home Vista Basic. Every time I try to I click partition It clicks but it takes about 5 minutes and I get this Message " Verification failed. This disk could not partitioned. then below it says " Use Disk Utility to repair this disk ". So i go to Disk utility and verify the disk and it will get about 1/2 through at about 10 minutes. Then I get another error message saying my disk could not be verified. I have no clue what to do now! It also tells me that Macintosh HD needs to be repaired but the repair button isn't able to be clicked Please help!
Restart the computer with the Shift key held down; doing this quietly runs the repair function.
(43886) -
applications on my Macbook Pro 10.8.5 (8 GB) hang frequently. Disk Utility keeps repairing iTunes, system libraries and applications, but the next time I start my notebook, again applications hang. What do I do? Itunes, Preview window, Microsoft Office 11 are the programs with most frequent hangs.
HI again. installed and then uninstalled both Mackeeper and Blackberry with their software. Etrecheck still shows the same 'failed to load' error. Pasted below. Could you pls advise what is still going wrong? What am I missing? I donot seem to understand the detailed procedure of home/library etc for checking complete removal of clean my mac. Sorry to bother you and thank you a million times for your assistance!
Hardware Information:
MacBook Pro (13-inch, Mid 2012)
MacBook Pro - model: MacBookPro9,2
1 2.9 GHz Intel Core i7 CPU: 2 cores
8 GB RAM
Video Information:
Intel HD Graphics 4000 - VRAM: 512 MB
Startup Items:
GT Network Tuning - Path: /System/Library/StartupItems/GT Network Tuning
NMPCCardDaemonVMC - Path: /System/Library/StartupItems/NMPCCardDaemonVMC
NMPPPMonitor - Path: /System/Library/StartupItems/NMPPPMonitor
Freecorder - Path: /Library/StartupItems/Freecorder
HWNetMgr - Path: /Library/StartupItems/HWNetMgr
System Software:
OS X 10.8.5 (12F45) - Uptime: 0 days 0:9:7
Disk Information:
APPLE HDD HTS547575A9E384 disk0 : (750.16 GB)
disk0s1 (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) /: 749.3 GB (225.09 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-8A8
USB Information:
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Apple Inc. Apple Internal Keyboard / Trackpad
FireWire Information:
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Kernel Extensions:
com.rim.driver.BlackBerryUSBDriverInt (0.0.97)
com.rim.driver.BlackBerryVirtualPrivateNetwork (1.0.15)
com.silex.driver.sxuptp (1.5.1)
Problem System Launch Daemons:
[loaded] BkBackupScheduler.plist
Problem System Launch Agents:
Launch Daemons:
[loaded] com.adobe.fpsaud.plist
[not loaded] com.Affinegy.InstaLANd.plist
[loaded] com.intego.BackupAssistant.daemon.plist
[loaded] com.microsoft.office.licensing.helper.plist
[loaded] com.oracle.java.JavaUpdateHelper.plist
[loaded] com.rim.BBDaemon.plist
[not loaded] com.rim.nkehelper.plist
[loaded] com.rim.tunmgr.plist
[loaded] org.macosforge.xquartz.privileged_startx.plist
Launch Agents:
[failed] cn.com.zte.usbswapper.plist
[loaded] com.Affinegy.InstaLANa.plist
[loaded] com.intego.backupassistant.agent.plist
[loaded] com.rim.BBLaunchAgent.plist
[loaded] com.rim.blackberrylink.BlackBerry-Link-Helper-Agent.plist
[loaded] com.rim.PeerManager.plist
[not loaded] de.novamedia.NovamediaDiskSupressor.plist
[loaded] org.macosforge.xquartz.startx.plist
User Launch Agents:
[loaded] com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
[loaded] com.google.GoogleContactSyncAgent.plist
[loaded] com.google.keystone.agent.plist
[loaded] com.macpaw.CleanMyMac.helperTool.plist
[loaded] com.macpaw.CleanMyMac.trashSizeWatcher.plist
[loaded] com.macpaw.CleanMyMac.volumeWatcher.plist
User Login Items:
None
3rd Party Preference Panes:
Flash Player
FUSE for OS X (OSXFUSE)
Growl
Java
Internet Plug-ins:
AdobePDFViewer.plugin
AdobePDFViewerNPAPI.plugin
Flash Player.plugin
FlashPlayer-10.6.plugin
iPhotoPhotocast.plugin
JavaAppletPlugin.plugin
OfficeLiveBrowserPlugin.plugin
QuickTime Plugin.plugin
RL Secure Plug-In Layer.plugin
SharePointBrowserPlugin.plugin
Silverlight.plugin
User Internet Plug-ins:
ContentManager.plugin
RocketEngine.plugin
UploadManager.plugin
Bad Fonts:
None
Top Processes by CPU:
2% hidd
2% Safari
1% EtreCheck
1% fontd
1% PluginProcess
1% WindowServer
0% WebProcess
0% PeerManager
0% BBLaunchAgent
0% mDNSResponder
Top Processes by Memory:
147 MB WebProcess
139 MB Safari
66 MB mds
57 MB com.apple.dock.extra
57 MB CalendarAgent
49 MB Dock
41 MB BlackBerry-Link-Helper-Agent
41 MB Finder
41 MB WindowServer
33 MB PluginProcess
Virtual Memory Statistics
5.69 GB Free RAM
1015 MB Active RAM
125 MB Inactive RAM
1.20 GB Wired RAM
244 MB Page-ins
0 B Page-outs -
The problem may be temporary. Try again later to back up. If the problem persists, use Disk Utility to repair your backup disk.
what does this mean?? why can't i backup before i have to get my hard drive replaced?!!? arghhbrahr3 wrote:
I am getting the same error message: "The problem may be temporary. Try again later to back up. If the problem persists, use Disk Utility to repair your backup disk." I don't have a TC but rather an external drive, which is twice the size of my harddisc, and it still has plenty of free space. The problem has lasted for 5 days. I even used a different external drive -- still same error message. Needless to say that I have run Disc Utility several times. Can anybody help? Thanks
I am having issues with some USB drives on Mountain Lion.. work perfectly on another computer with Snow Leopard.. not even recognised by ML.
Is the disk recognised?
If so and TM cannot pick it up.. do a full reset of TM and try again.
A4 http://pondini.org/TM/Troubleshooting.html
Maybe you are looking for
-
The search function in the itunes store does not work. It will accept a request and suggest searches but then it locks up and will not search. Clicking on the magnifying glass or a suggested search does nothing. Re-installing itunes has not helped
-
I changed from a dial up to a high speed network and can no longer get Firefox to work as my browser. What can I do. I did try to download Firefox again, but still will not work.
-
My ipad is saying connect to itunes because it has been disabled. but my itunes says i need to unlock it before i cant do anything. i need help.
-
Remote Deployment W/O installing SUN One AS.
Hi, I am trying to deploy an archive using wsdeploy.bat command. For this I need to have SUN One AS installed on my localmachine. Is it possible to issue the wsdeploy.bat command W/O installing the SUN One AS on my localmachine or I can copy only the
-
How to use GROUP BY in this Query
The below query has TRUNC funtion and I don't want the NMR field to put in group by, but it should be in select. Please help SELECT H.SAM_ATTUID AS ATTUID1, B.AGENT_ID, TRUNC (NVL (FORC_ANNREV_PAID, CALC_ANNREV_PAID) / 12, 2) AS NMR, PRODUCT_GROUP FR