Disk Utility doesn't account for the total HDD capacity

I tried installing Windows 8 and Ubuntu on my Mac. The Windows 8 worked, the Ubuntu did not. I decided to try again, and tried to erase and remove the partitions for Ubuntu and Windows (~200GB together).
After erasing and removing the parititions, diskutil shows this:
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *500.1 GB   disk0
   1:                        EFI                         209.7 MB   disk0s1
   2:                  Apple_HFS Macintosh HD            305.1 GB   disk0s2
Where is the 200GB??? How do I get it back?

You removed that partition by trying to erase the other partitions you created. Now you have a minor problem. Try correcting it using Disk Utility, not diskutil. Repartition your drive by trying to add back a standard OS X partition where you removed the other partitions.

Similar Messages

  • Disk Utility doesn't recognize HD.  Installed new one, same problem.

    Hello,
    I have a MBP. It suddenly wouldn't boot up, and had the flashing question mark folder upon starting up, so I figured that the HD needed to be replaced. I ordered a brand new drive, and when I try to install Leopard, it doesn't see the new hard drive. I open Disk Utility to partition the drive to GUID, but Disk Utility doesn't even see the new drive. Just my optical drive is listed.
    I hooked up the old hard drive externally to another mac, and it appears to be working just fine. So it isn't a bad drive as I had originally thought.
    What else could be wrong? The laptop fails to see any internal hard drives. Is there anything else that I can do to fix this problem? Thanks.

    Purely conjecture, your serial ATA controller may be bad (or the cable). I assume nothing shows in System Profiler/Hardware/Serial-ATA either. Maybe try the SMC reset?
    -If the computer is on, turn it off.
    -Disconnect the AC Adapter and remove the computer's battery.
    -Press and hold down the power button for 5 seconds and then release the button.
    -Reconnect the battery and AC Adapter.
    -Press the Power button to restart the computer.

  • TS1338 I have 4 Trojan Horse viruses on my external drive I use for Time Machine.  My MacBook Pro hard drive is clean.  I have eased the external drive 3 times using Disk Utility and it still has the 4 Trojan Horse viruses. How do I get rid of them. Wayne

    I have 4 Trojan Horse viruses on my external drive I use for Time Machine.  My MacBook Pro hard drive is clean.  I have eased the external drive 3 times using Disk Utility and it still has the 4 Trojan Horse viruses. How do I get rid of them. I am using 10.8.3  Wayne

    ksu62 wrote:
    The infection names are:  classload.jar-719ef6a5.zip
                                              classload.jar-5db452le31.zip
                                              ar3.jar-6ce3b2f-45l483f.zip
                                              classload.jar-lef99412-63bsd3fl.zip
    Those look alot like file names and not infection names. I don't find any reference to anything like that on Norton or VirusTotal. Since you said these were Trojans, I would expect to see "Trojan" as part of the infection name.
    ".jar" files are executable Java applets. The random alpha-numerics would seem to indicate a cache file, likely from a browser with Java enabled. And we all know what ".zip" means.
    Worst case is that you had Java enabled in a browser and were infected by one of the late variants of the Flashback Trojan over a year ago or one of a couple of other attacks using the same vulnerability but targetted against a small number of political sympathizers. Much more probable is that thes were Windows only Trojans. Hopefully you have a fully up-to-date OS X, including Java, and have disabled Java in all your browsers by now.

  • Macbook Pro: Disk Utility doesn't see my HD

    Hi guys,
    My Macbook Pro has been running slower lately, but I honestly didn't think too much about it...until today. It's just over a year old, running Mac OS X, and I mostly use Safari as my browser, but I have to use Firefox for my online classes. Today, Firefox froze up and quit responding, so I Force Quit it. A few minutes after this, Safari did the same thing, and then it was my entire desktop. Nothing was responding; I had to shut down by pushing the power button.
    And then, it wouldn't turn back on. The chime sounded, the apple appeared, and the spinning circle underneath it. And it spun, and spun...until a generic "stop" symbol replaced the apple logo. I immediately shut it back down and did an online search. I followed every fix recommended for this issue. I tried reseting the PRAM, and then the SMC, and still the same thing happened. I tried to boot in Safe Mode, and if seemed to be working...right up until an hour passed and nothing new was happening. I shut it down again, and tried booting from the install disc of Snow Leopard. That worked, and I tried to do Disk Utility with the intention of following the online apple directive of running first aid on my HD. Except Disk Utility doesn't see my HD, only the boot disc and DVD drive. I'm guessing this is a bad sign. I tried calling Apple Care, but they are closed right now. I will call them in the morning, but in the meantime, I thought I'd see if anyone here had any advice I haven't already tried. Sadly, I haven't run Time Machine in...months. I'll end up losing a lot of stuff because I just didn't do that if my HD is toast.
    Any suggestions?

    Sure seems to be a failed(ing) hard drive. If you happen to get it into safe mode again, the ONLY thing you should immediately do is copy off your Home folder to an external USB disk, SD card, something. Then just get it to an Apple store for check.
    Try to copy your files off first and don't try anything else to get at that disk until you copy your home folder. If the disk is failing and you're trying to do things to it you'll loose the chance to get that data.

  • DIsk Utility doesn't allow creating a partition

    Hi all,
    I just bought a new MacBookPro and installed Mountain Lion yesterday. I decided to use a encrypted file system (File Vault). So far everything worked fine.
    This morning I decided to do a clean install, as Migration Assistent carried over some data I do not need.
    So I booted into Recovery Mode, selected the harddisk and chose "Erase". As I wanted an encrypted volume again, Disk utility asked me for a password which I specified. Immediately after clicking ok, Disk Utility said "Not enough RAM to complete this request". After clicking OK, my partition went and since then I am strugglign to find out how to activate it (data not important, as everythign backed up).
    Apple Care also doesn't knwo what to recommend anymore.
    Here's what I tried:
    1) Command+R boot and Disk Utility
    2) Boot from external HD and Disk Utility
    3) Internet Recovery (ends with error)
    4) Delete PR
    The strange thing is that Disk Utility shows Macintosh HD on the top level with the option to partition (it doesn't show any indended partitions) but all options are grayed out. It's like Disk Utility somehow confused Parttion with physical drive and now gets confused.
    Any other idea other than sending the macbookPro back to Apple?
    Thanks
    Matt

    You should of taken the encryption off before you started that proccess. That is one thing they don't tell you. Never try to modify an encrypted partition.
    You may have to boot to the Internet (Online) Recovery HD system lto Re-Partition the drive as one partition.
    Hold down Command+Option+r keys at boot and keep them held down until you see a spinning globe in the center of the screen, then you can let them up. Have the computer WIRED to your unternet router.
    Once that loads open disk utility and select the Drive Name (Not volume name, IE Macintosh HD) and then the partition tab and select One partition from the Partition Layout drop down.
    If that doesn't work then the drive is FUBAR.

  • Disk Utility doesn't run from installation dvd.....

    hi there:)
    i ran a scheduled maintenance check using Onyx. It turned out that the disk could not be verified and it had to be fixed by inserting the installation dvd and running 'disk utility'. i inserted the dvd and ran the 'disk utility', however, it quit unexpectedly. the following message came up:
    Process: Disk Utility [417]
    Path: /Volumes/Mac OS X Install Disc 1/Applications/Utilities/Disk Utility.app/Contents/MacOS/Disk Utility
    Identifier: com.apple.DiskUtility
    Version: 10.5.8 (198.16)
    Build Info: DiskUtility-1981600~17
    Code Type: X86 (Native)
    Parent Process: launchd [172]
    Date/Time: 2008-12-28 12:28:49.499 +0000
    OS Version: Mac OS X 10.5.6 (9G55)
    Report Version: 6
    Exception Type: EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Crashed Thread: 0
    Dyld Error Message:
    Symbol not found: __commpagedsmos
    Referenced from: /Volumes/Mac OS X Install Disc 1/Applications/Utilities/Disk Utility.app/Contents/MacOS/Disk Utility
    Expected in: /usr/lib/libSystem.B.dylib
    i really want to know what to do to save my mac book!
    please help
    regards,
    rik

    Rik,
    Please reread my first post carefully & make sure you follow its instructions closely. The "Repair Disk" step (not the verify one) should be run while your Mac is started up from the install disk, then the "Repair Permissions" step should be run after you have restarted normally.
    Some background info that may be helpful:
    Disk Utility (& all such disk utilities) must temporarily "unmount" a disk to affect a repair of its file system (which is what the "Repair Disk" step does). Unmounting a disk makes it unavailable for normal use. The disk containing the operating system that is currently running the computer (the startup disk) cannot be unmounted. This is why the "Repair Disk" button is grayed out if you run Disk Utility with your startup disk as its target.
    Repairing permissions does not require unmounting the disk but it does require a healthy file system, which is why the disk repair must precede it. Apple recommends repairing permissions on the start up disk while booted from it, which is why it should be done after restarting normally.
    The verify steps do not actually repair anything. They just run the checks that the repair steps run to determine if any repairs are needed & report the results of those checks.
    The routine that repairs permissions is part of the OS itself. Disk Utility, Onyx, & all other such utilities that repair permissions actually just tell the OS to perform this routine. Thus, it doesn't matter which one you use to do this repair, nor is one utility any better than another at doing this. So if you prefer, after restarting after doing the disk repair from the install disk you can do the permissions repair with Onyx.

  • IPod Shuffle not recognized, device not recognized, disk utility doesn't...

    ...disk utility doesn't show up.
    It's all on my wife's computer as it's her iPod. Up until yesterday - and she didn't change ANYTHING - iTunes 7.01 had no problem wiht the iPod. Today, however, iTunes nor her Mac recognizes the iPod. Can't do a thing with it. It displays a nice green light, but that's it. All connections checked and re-checked. Looked at the disk utility and there's no image for her iPod.
    I plugged it into my own Mac and iTunes 7.02 tries to upload/access her library from her iPod and 1) after an interminable wait, say four to five minutes, it recognizes that there's a shared library available, and 2) then it says there's some firewall that won't let iTunes access the liberary.
    I don't have an iPod of my own, so my experience is really limited. She uses her iPod all the time and, again, hasn't done anything different than she did last night.
    What is to be done? Thanks in advance for GOOD tips.

    Turns out she's running iTunes 7.1...
    Still nothing.
    Anyone out there, please?

  • Disk utility doesn't show external Time Capsule harddisk

    Hi.
    With an older OS X, it was possible to use disk-utility for making some changes at my TimeCapsule(3rd.Gen.)-harddisk.
    Now i tried this with the latest version of Yosemite. I think, at the 1st view to to disk utility window, there was an TC-ikon shown under the SuperDrive-ikon. But some seconds later it was gone! I tried it again after restart my iMac an the TC, but every time finder-window and disk-utility-window looks like this ..
    ... with added comments in green ("Finder"-window, "disk utility"-window) and red (lost "TC-Harddisk?"-ikon).
    I tried this also with a MacBook-air (newest version) - same result
    What happened? Is it a Yosemite-Problem?
    Can I do something with the terminal-app to get the connection?
    <<<---- I posted this Nov.2014 at Mac OS & System Software / OS X Yosemite
    Today I connected an USB-Stick with my TimeCapsule. Then I opened Disk Utility and was happy - for some minutes.
    At the window of the Disk Utility I saw the TC-Harddisc an the memory-stick too.
    But when I tried to add an partition to the TC-Harddisc, it was gone away.
    I closed-and-started the disk Utility again - now TC-Harddisc was shown.
    I disconnected-and-connected the memory-stick again - now TC-Harddisc was shown at the disc-utility-window.
    Thanks for Help!

    You cannot partition a TC disk from disk utility in the Mac.. that has always been the case.
    What you did last time is partition the sparsebundle.. that is a virtual disk created by the computer.. merely partitioning a virtual disk is pointless.
    You simply need to create another sparsebundle or dmg file to use as virtual disk.
    But the fact that Yosemite continually loses connection to the TC .. oh yeah that is because Yosemite is buggy.
    Reset your TC to factory.
    Do this manually..
    Factory reset universal
    Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
    N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
    Then redo the setup in the airport utility. Use short names with no spaces and pure alphanumeric characters.
    Same with passwords only longer.
    I recommend you then mount the TC in finder manually by its IP address if at all possible not by name.
    The problem here is the IP must be static which it is by default if the TC is the main router but it will have to be specially setup if the TC is bridged.
    Use Go, Connect to Server.
    SMB://10.0.1.1
    When asked for the disk password type that in and do not forget to save it in the keychain.
    Then you can mount a TM sparsebundle in disk utility if you want.. although I suggest that is pointless other than to verify your backup.
    Do not partition it.. that is not helpful at all.

  • Disk Utility doesn't see Time capsuleDisk

    I'm trying to migrate a backup did with Time Machine to a brand new Airport Time Capsule Disk.
    This is for don't loess the previous backups having ones new.
    I got some information and it looks I should connect both  disks (old HD and new Time capsule) to my Mac , then restore the new one using as source the old backups.
    The matter is that DISK UTILITY APP doesn't see the Time Capsule disk .
    Who may help me in doing this operation?
    Many thanks
    ivano

    Niel, many thanks for your reply. I've gone trough the instructions you've indicated but I've not found my case.
    Let me try to explain my situation
    Till now I did the backups in an external Western Digital HD (MyBookLive) using Time Machine.
    The disk was gonna be full so I bought a Time Capsule bigger than the WD I had.
    My intention was to continue to do backups using TimeMachine on the new TimeCapsule KEEPING ONLINE the old backups.
    I read that I should use DISK UTILITY APP and restore the old spares bundle file into a new one locate into the Time Capsule.
    My problem is that using DISK UTILITY I cannot see both the WD Disk neither the Time Capsule  .
    Many thanks in advance for your support
    ivano

  • Disk Utility doesn't recognise inserted DVD-R DL

    I upgraded to Leopard from Tiger a few week ago and Disk Utility has been working fine for a while. I bought a few blank DVD-R DL disks with 8.5Gig storage capacities, but, when inserted, Disk Utility doesn't show them in the top of the pane on the left side.
    It shows the Super Drive, but doesn't show an inserted DVD below it like it usually should.
    Any suggestions?
    Message was edited by: jemorris55

    Alright, so instead of burning to the disk specifically, I burned to the superdrive which automatically burned to the disk. It worked alright and now that the DVD has something on it, its icon pops up in Disk Utility. I don't know why it chenged...

  • Disk Utility has Lost Connection with the Disk Managment Tool

    Hi,
    For starters, this problem is not associated with the thread that Brian Z. has posted at the top of this forum. Having said that, here's my problem:
    I had installed Security Update 2006-003, and Quicktime 7.1. Permissions were repaired before and after each installation, and all went well.
    Some hours later, I was experimenting with Apple Remote Desktop. I had activated ARD in the System Preferences>Sharing pane, and it provided me an IP address associated with ARD. I then turned on Airport, and ARD provided me with an IP address associated with that connection. However when I turned off my modem connection, System Preferences>Sharing hung, and had to be Force Quit.
    Console Log follows:
    ===== Mon May 15 2006 ===== 21:09:09 America/Anchorage =====
    2006-05-15 21:09:17.488 System Preferences[2732] Can't open input server /Library/InputManagers/Menu Extra Enabler.bundle
    2006-05-15 21:09:28.224 System Preferences[2732] ### Error:268435460 File:FileSharing.m Line:308
    2006-05-15 21:09:38.230 System Preferences[2732] ### Error:268435460 File:FileSharing.m Line:343
    2006-05-15 21:09:48.415 System Preferences[2732] ### Error:268435460 File:FileSharing.m Line:343
    Thinking a plist had become corrupted, I trashed the following:
    com.apple.systempreferences.plist
    com.apple.RemoteDesktop.plist
    com.apple.Remotemanagement.plist
    com.apple.sharing.firewall.plist.
    System Preferences started out very slowly, but then all the panes except Sharing would work ok.
    I booted from the install disk and performed a Disk Repair. There were no problems reported.
    When I tried to run a Repair Permissions, after about 20 seconds I got the, "Disk Utility has lost connection with the disk management tool and can not continue. Please quit and relaunch Disk Utility."
    I quit D.U. and the Installer, and was able to successfully run a Repair Permissions from the D.U. in my Utilities folder. It had no problems to report.
    Continuting to troubleshoot the System Preferences problem, I then trashed the com.apple.preferencepanes.cache. This solved my System Preferences>Sharing problem.
    However, I am still unable to perform a Repair Permissions after booting from my install disk (I get the subject message). Repairing permissions from the Disk Utility in my Utilies folder works fine.
    Any thoughts out there on a logical way to troubleshoot where my problem is? Is there a way to get a console log when I'm running DU from the install disk, or a comparable source??
    Thanks,
    Bob

    I found this crash log that was generated about the time I had problems with System Preferences hanging.
    Thoughts?
    Bob
    Entitled "writeconfig.crash.log"
    Host Name: Bobs-Big-Mac.local
    Date/Time: 2006-05-15 21:08:17 -0800
    OS Version: 10.3.9 (Build 7W98)
    Report Version: 2
    Command: writeconfig
    Path: /System/Library/PrivateFrameworks/Admin.framework/Resources/writeconfig
    Version: ??? (???)
    PID: 2707
    Thread: 0
    Exception: EXC_BREAKPOINT (0x0006)
    Code[0]: 0x00000001
    Code[1]: 0x90a8d2c0
    Thread 0 Crashed:
    0 com.apple.Foundation 0x90a8d2c0 _NSRaiseError + 0xf8
    1 com.apple.Foundation 0x90a349d8 -[NSConnection sendInvocation:] + 0x6a4
    2 com.apple.Foundation 0x90a2d8e0 -[NSObject(NSForwardInvocation) forward::] + 0x198
    3 libobjc.A.dylib 0x90866810 objcmsgForward + 0xb0
    4 writeconfig 0x0000baac 0x1000 + 0xaaac
    5 writeconfig 0x0000ec84 0x1000 + 0xdc84
    6 writeconfig 0x0000ad88 0x1000 + 0x9d88
    7 writeconfig 0x0000abfc 0x1000 + 0x9bfc
    PPC Thread State:
    srr0: 0x90a8d2c0 srr1: 0x0202f030 vrsave: 0x00000000
    cr: 0x24000442 xer: 0x00000000 lr: 0x90a8d298 ctr: 0x90a23528
    r0: 0x00000000 r1: 0xbffff430 r2: 0xa0a204bc r3: 0xa0a34e20
    r4: 0x9086eb88 r5: 0x20000000 r6: 0xbffff110 r7: 0x00000000
    r8: 0x00000001 r9: 0x0030d370 r10: 0x00000239 r11: 0x28000442
    r12: 0x90a23528 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000
    r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000
    r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000000
    r24: 0x00310680 r25: 0xbffffcd8 r26: 0x00311c50 r27: 0xa0a2af6c
    r28: 0xa0a30e7c r29: 0xa0a24ae0 r30: 0x003109a0 r31: 0x90a8d1d0
    Binary Images Description:
    0x1000 - 0x28fff writeconfig /System/Library/PrivateFrameworks/Admin.framework/Resources/writeconfig
    0x80830000 - 0x8090efff libxml2.2.dylib /usr/lib/libxml2.2.dylib
    0x8c2bc000 - 0x8c2c5fff libBSDPClient.A.dylib /usr/lib/libBSDPClient.A.dylib
    0x8fe00000 - 0x8fe4ffff dyld /usr/lib/dyld
    0x90000000 - 0x9014ffff libSystem.B.dylib /usr/lib/libSystem.B.dylib
    0x901c0000 - 0x9026efff com.apple.CoreFoundation 6.3.9 (299.37) /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
    0x902b0000 - 0x90529fff com.apple.CoreServices.CarbonCore 10.3.7 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonC ore.framework/Versions/A/CarbonCore
    0x905a0000 - 0x90610fff com.apple.framework.IOKit 1.3.6 (???) /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
    0x90640000 - 0x906c8fff com.apple.CoreServices.OSServices 3.0.1 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/OSServi ces.framework/Versions/A/OSServices
    0x90733000 - 0x90740fff com.apple.CommonPanels 1.2.1 (1.0) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/CommonPanels. framework/Versions/A/CommonPanels
    0x90810000 - 0x90810fff com.apple.ApplicationServices 1.0 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Application Services
    0x90860000 - 0x908cffff libobjc.A.dylib /usr/lib/libobjc.A.dylib
    0x908f5000 - 0x90912fff com.apple.audio.SoundManager 3.9 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/CarbonSound.f ramework/Versions/A/CarbonSound
    0x90940000 - 0x909b3fff com.apple.DesktopServices 1.2.5 /System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Desk topServicesPriv
    0x90a20000 - 0x90b7bfff com.apple.Foundation 6.3.8 (500.61) /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
    0x90d40000 - 0x90d40fff com.apple.Carbon 10.3 (???) /System/Library/Frameworks/Carbon.framework/Versions/A/Carbon
    0x90d50000 - 0x90d6bfff com.apple.SystemConfiguration 1.7.1 (???) /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfi guration
    0x90d7c000 - 0x90d8cfff com.apple.speech.recognition.framework 3.3 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SpeechRecogni tion.framework/Versions/A/SpeechRecognition
    0x90dd0000 - 0x90df0fff com.apple.DirectoryService.Framework 1.7.2 /System/Library/Frameworks/DirectoryService.framework/Versions/A/DirectoryServi ce
    0x90e10000 - 0x90e11fff com.apple.ServerControl 10.2.3 /System/Library/PrivateFrameworks/ServerControl.framework/Versions/A/ServerCont rol
    0x90e13000 - 0x90e4bfff com.apple.LaunchServices 10.3.5 (98.4) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ LaunchServices.framework/Versions/A/LaunchServices
    0x90e60000 - 0x90e66fff com.apple.ServerPrefs 10.2.3 /System/Library/PrivateFrameworks/ServerPrefs.framework/Versions/A/ServerPrefs
    0x90e80000 - 0x90e9ffff com.apple.MediaKit 2.6 (232.3) /System/Library/PrivateFrameworks/MediaKit.framework/Versions/A/MediaKit
    0x90ec0000 - 0x90ec0fff com.apple.Cocoa 6.3 (???) /System/Library/Frameworks/Cocoa.framework/Versions/A/Cocoa
    0x9102d000 - 0x91047fff com.apple.openscripting 1.2.1 (???) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/OpenScripting .framework/Versions/A/OpenScripting
    0x910c0000 - 0x910c1fff com.apple.AFPDefines 2.0.1 /System/Library/PrivateFrameworks/AFPDefines.framework/Versions/A/AFPDefines
    0x910e0000 - 0x91134fff com.apple.bom 1.2.7 (64.1) /System/Library/PrivateFrameworks/Bom.framework/Versions/A/Bom
    0x91141000 - 0x91141fff com.apple.CoreServices 10.3 (???) /System/Library/Frameworks/CoreServices.framework/Versions/A/CoreServices
    0x91230000 - 0x9123afff com.apple.framework.machinesettings 1.3.3 /System/Library/PrivateFrameworks/MachineSettings.framework/Versions/A/MachineS ettings
    0x91242000 - 0x9124cfff com.apple.framework.AppleTalk 1.2.0 (???) /System/Library/Frameworks/AppleTalk.framework/Versions/A/AppleTalk
    0x91251000 - 0x9125afff com.apple.DiskArbitration 2.0.5 /System/Library/PrivateFrameworks/DiskArbitration.framework/Versions/A/DiskArbi tration
    0x912e0000 - 0x912f7fff com.apple.LangAnalysis 1.5.4 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ LangAnalysis.framework/Versions/A/LangAnalysis
    0x91303000 - 0x91370fff libvDSP.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libvDSP.dylib
    0x913a0000 - 0x9145ffff ColorSync /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ColorSync.framework/Versions/A/ColorSync
    0x915e0000 - 0x91699fff com.apple.QD 3.4.71 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ QD.framework/Versions/A/QD
    0x916f0000 - 0x91728fff com.apple.AE 1.4 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ AE.framework/Versions/A/AE
    0x91760000 - 0x917f3fff com.apple.print.framework.PrintCore 3.3 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ PrintCore.framework/Versions/A/PrintCore
    0x9194f000 - 0x9194ffff com.apple.audio.units.AudioUnit 1.3.3 /System/Library/Frameworks/AudioUnit.framework/Versions/A/AudioUnit
    0x91970000 - 0x919befff com.apple.print.framework.Print 3.3 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Print.framewo rk/Versions/A/Print
    0x91a40000 - 0x91ab3fff com.apple.NavigationServices 3.3.3 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/NavigationSer vices.framework/Versions/A/NavigationServices
    0x91afb000 - 0x91b0bfff com.apple.ImageCapture 2.1.5 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/ImageCapture. framework/Versions/A/ImageCapture
    0x91b30000 - 0x91b44fff libCGATS.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libCGATS.A.dylib
    0x91b60000 - 0x91b6bfff libCSync.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libCSync.A.dylib
    0x91ba3000 - 0x91bbdfff libresolv.9.dylib /usr/lib/libresolv.9.dylib
    0x91bd0000 - 0x91bdffff libPSRIP.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libPSRIP.A.dylib
    0x91c00000 - 0x91c13fff libRIP.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libRIP.A.dylib
    0x92037000 - 0x92052fff libcurl.2.dylib /usr/lib/libcurl.2.dylib
    0x92070000 - 0x92096fff com.apple.FindByContent 1.4 (1.2) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ FindByContent.framework/Versions/A/FindByContent
    0x92170000 - 0x92357fff com.apple.security 2.4 (179) /System/Library/Frameworks/Security.framework/Versions/A/Security
    0x927f0000 - 0x92827fff com.apple.CFNetwork 1.2.2 (7) /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CFNetwo rk.framework/Versions/A/CFNetwork
    0x9283f000 - 0x92857fff com.apple.WebServices 1.1.1 (1.1.0) /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/WebServ icesCore.framework/Versions/A/WebServicesCore
    0x92880000 - 0x92c05fff com.apple.HIToolbox 1.3.7 (???) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox
    0x92de0000 - 0x92e30fff com.apple.HIServices 1.4.1 (0.0.1d1) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ HIServices.framework/Versions/A/HIServices
    0x92e70000 - 0x9336ffff com.apple.AppKit 6.3.10 (743.42) /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit
    0x93680000 - 0x93958fff com.apple.CoreGraphics 1.203.30 (???) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/CoreGraphics
    0x939d0000 - 0x939d4fff libmathCommon.A.dylib /usr/lib/system/libmathCommon.A.dylib
    0x93a50000 - 0x93a64fff libcups.2.dylib /usr/lib/libcups.2.dylib
    0x93a6a000 - 0x93a84fff libPDFRIP.A.dylib /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libPDFRIP.A.dylib
    0x93bec000 - 0x93ca4fff com.apple.audio.toolbox.AudioToolbox 1.3.4 /System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox
    0x94270000 - 0x94333fff com.apple.DiskImagesFramework 10.3.8 (77) /System/Library/PrivateFrameworks/DiskImages.framework/Versions/A/DiskImages
    0x94580000 - 0x9458bfff com.apple.securityhi 1.2 (90) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/SecurityHI.fr amework/Versions/A/SecurityHI
    0x94593000 - 0x9459ffff com.apple.help 1.0.1 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Help.framewor k/Versions/A/Help
    0x945b0000 - 0x945b9fff libz.1.dylib /usr/lib/libz.1.dylib
    0x94650000 - 0x946affff com.apple.SearchKit 1.0.2 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/SearchK it.framework/Versions/A/SearchKit
    0x94720000 - 0x94721fff com.apple.securityfoundation 1.0 (6) /System/Library/Frameworks/SecurityFoundation.framework/Versions/A/SecurityFoun dation
    0x94800000 - 0x9488cfff com.apple.ink.framework 101.1.4 (55.12) /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/Ink.framework /Versions/A/Ink
    0x94e0b000 - 0x94e1efff com.apple.speech.synthesis.framework 3.2 /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ SpeechSynthesis.framework/Versions/A/SpeechSynthesis
    0x95140000 - 0x951b5fff com.apple.DiscRecordingEngine 2.1.17 /System/Library/Frameworks/DiscRecording.framework/Versions/A/Frameworks/DiscRe cordingEngine.framework/Versions/A/DiscRecordingEngine
    0x954c0000 - 0x95ac6fff libBLAS.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libBLAS.dylib
    0x95b20000 - 0x95df0fff libLAPACK.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libLAPACK.dylib
    0x95f00000 - 0x95f20fff libvMisc.dylib /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libvMisc.dylib
    0x96028000 - 0x960f0fff libcrypto.0.9.7.dylib /usr/lib/libcrypto.0.9.7.dylib
    0x968d0000 - 0x969b2fff libicucore.A.dylib /usr/lib/libicucore.A.dylib
    0x96a04000 - 0x96a6dfff com.apple.htmlrendering 1.1.2 /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HTMLRendering .framework/Versions/A/HTMLRendering
    0x96aa0000 - 0x96acefff libssl.0.9.7.dylib /usr/lib/libssl.0.9.7.dylib
    0x96b50000 - 0x96bdffff ATS /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ATS.framework/Versions/A/ATS
    0x96c00000 - 0x96c67fff com.apple.audio.CoreAudio 2.1.3 /System/Library/Frameworks/CoreAudio.framework/Versions/A/CoreAudio
    0x96cb0000 - 0x96d9efff libiconv.2.dylib /usr/lib/libiconv.2.dylib
    0x96de0000 - 0x96df0fff com.apple.vecLib 3.0.3 (vecLib 3.0.3) /System/Library/Frameworks/vecLib.framework/Versions/A/vecLib
    0x96ee0000 - 0x96ee8fff libbsm.dylib /usr/lib/libbsm.dylib

  • Service accounts for the Workspace Database service permission Error while creating Tabular Mode from PowerPivot

    Hi All,
    Please help me out against this issue. I have spent so much (3 working days) time just figuring out what is the issue and its solution.
    I am learning Tabular Mode and trying to create a mode based on PowerPivot model. I am getting following error message:
    'The PowerPivot workbook could not be imported. The service account for the workspace database server does not have permission to read from the PowerPivot workbook.'
    Here is my infrastructure:
    1. SSAS in Tabular Mode is installed on my Windows 8 Laptop
    2. PowerPivot is also in my laptop
    3. There is only my account (as Admin of course) for SSAS
    Here are my questions:
    1. What is this error and how can I cope with that? A step by step explanation would be highly appreciated :-)
    2. Do I need to change something in Windows settings or in SSAS?
    3. I am confused about my workspace database server as well, Do I have to install SSAS twice; one for development and one for workspace?
     Looking forward for the expert advise.
    Tahir
    Thanks, TA

    Hi,
    I suspect you might have more luck if you try the SSAS forum: http://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlanalysisservices
    Regards
    Jamie
    ObjectStorageHelper<T> – A WinRT utility for Windows 8 |
    http://sqlblog.com/blogs/jamie_thomson/ |
    @jamiet |
    About me

  • Apache Sling JCR Resource Resolver doesn't work for the anchor tags which is been rendered through j

    Certainly I realized that Apache Sling JCR Resource Resolver doesn't work for the anchor tags which is been rendered through jquery or javascript.
    e.g.
    In Felix Console , in Apache Sling JCR Resource Resolver configuration I have added following mapping.
    /content/myproject/-/
    So If any anchor tag is there like <a href="/content/myproject/en.html"> click me </a> then it will be mapped to "/en.html" automatically.
    But the problem is there in following scenario.
    I have an anchor tag as follows.
    <a href="#" id="test"> click here </a>
    And I am assigning the href to anchor through JQUERY.
    <script>
    $("#test").attr("href","/content/myproject/en.html");
    </script>
    Ideally this should have been mapped to "/en.html".
    But it is not mapping to "/en.html". It still shows "/content/myproject/en.html".
    How to resolve this.
    Thanks,
    Sai

    In a servlet you have access to the resourceResolver so if you know which attributes contain links then it's relatively easy to apply resourceResolver.map to those links.
    Your challenge is clearly how do you know which attributes are links and which aren't. Its is the same challenge that makes parsing the response and rewriting it on the way out difficult - the JSON doesn't have any semantic meaning so how do identify which attributes require rewriting. There really is no good answer ot that question in my experience - all the options have down sides.
    Create some convention - all attributes matching this pattern X get mapped before being converted to JSON (could be attributes whose name ends in link, or it could a convention applied to the value of the attribute - if the attribute is a string that starts with /content apply the resource resolver mapping. In this case you have train your developers to follow this convention which is the down side.
    Create some configurable list of attribute names that require mapping. This is brittle, requires training and is easy to break.
    Implement a client side version of the resource resolver mapping. It wouldn't be as full proof as server side mapping (because that takes into account but you could make it work for simple logic like stripping of /content/site/en. If ou are just trying to solve the simple version of this issue - stripping off the top of the repository path this might be your best option.
    Not worry about it and set up Apache 301 redirects that catch any long URLs and redirect them to short URLs (so configure apache to look for any URL matching /content/site/en and strip off /content/site/en and do a 301 redirect to the shortened URL. You end up with a lot of extra HTTP request because of all the 301s but it would work (I wouldn't recommend this option - but it is possible).

  • Disk utility doesn't see internal HD

    A friend gave me a 17" Late 2006  Core 2 Duo, iMac 5.1, model MA590LL, it was working fine.
    Donor asked me to zero out data before I used it so I did with Disk Utility. about 3/4 of the way through it hung up. I restarted it and now, starting up from the original install discs (10.4.7) hard drive will not show up anywhere in disk utility or as a destination volume for the OS reinstall.
    Did the HD die during zeroing data?
    if so what type replacement do I need? The original was 160gb which was plenty for the use this will see. Is all I need a 3.5 SATA HD?
    thanks,
    Rob

    Thanks Niel,
    I see the I can get a 160GB  3.5" SATA  pretty cheap from Amazon, I really don't need anything more than that.  Do I need to match rpm (7200 or 10,000), cache size (8mb or 16mb) and transfer (1.5Gb/s or 3gb/s) rate also?
    If so where can I find what the originals were?
    Are the connectors standard?
    thanks,
    Rob

  • Disk Utility doesn't refresh when inserting new DVDs

    I'm in the process of copying a few DVDs by making an image of them first and then burning the image onto a blank DVD through Disk Utility.
    After I'm done with one and insert a new DVD to copy, Disk Utility doesn't refresh to show me the new disk is in the drive. Is it normal?
    If it is, is there something I can press so that Disk Utility manually refresh its listing of drives?
    I find that quitting and restarting Disk Utility just to make a new image is so inefficient.

    I am suddenly having the same problem. When I insert a blank disc either cd or dvd it does not show up in the left column in disc utility. I have tried closing and then relaunching disc utility but nothing. The disc shows up on my desk top but not in disc utility. I fear this is a Snow Leopard problem. Toast has no problem recognizing the disc and burning to it.

Maybe you are looking for