Disk Utility doesn't burn DL DVD+R

I can burn DL only by using DVD decryptor on Winxp vm but not using Disk Utility
I can mount the iso and read all the files, so I know there us nothing wrong with the image
I'm am using latest version of Snow Leopard in 64 bit mode

Greencard wrote:
It is a Kodak DVD+R DL
I get message "try different media" or something similar when I put the blank DVD in (will return when I get home to get complete exact message)
However, it is not the media as the same blank DVD on the same drive works under WinXP emulation on same machine (I use Parallels Desktop). So it is either the disk utility program or the osx dvd drivers at fault
See Barney-15E's statement: While windows may have the appropriate drivers, Mac OS X may not.
You should try Verbatim.

Similar Messages

Disk Utility doesn't recognise inserted DVD-R DL

I upgraded to Leopard from Tiger a few week ago and Disk Utility has been working fine for a while. I bought a few blank DVD-R DL disks with 8.5Gig storage capacities, but, when inserted, Disk Utility doesn't show them in the top of the pane on the left side.
It shows the Super Drive, but doesn't show an inserted DVD below it like it usually should.
Any suggestions?
Message was edited by: jemorris55

Alright, so instead of burning to the disk specifically, I burned to the superdrive which automatically burned to the disk. It worked alright and now that the DVD has something on it, its icon pops up in Disk Utility. I don't know why it chenged...

By using "Disk Utility", will I burn a DVD to watch on TV or burn a DVD for storage?

Old Toad tells me to burn a DVD from"Disk Utility", but will that burn my DVD so I can watch it on TV, or will it store those files on a DVD?
If best, I would like to actually watch the DVD...

Disk Utility will create a data DVD for storage.
Ony iDVD will burn a video for playback with a DVD player or your Mac.
The current Apple thinking is that the entire world has access to fast broadband and wants to distribute home movies to friends and relatives via download (iCloud) rather than mailing them a DVD. The fact that in reality not all users do, has so far had no effect on this policy. If you scream and shout loudly enough down the phone Apple may send you a free copy of iDVD. That worked for some, but is now said to have been withdrawn by Apple. Also, you can complain bitterly here, perhaps suggesting that Apple could have provided a choice between using iCloud and burning DVDs:
http://www.apple.com/feedback/
Whilst Macs with a Superdrive continue to be able to burn video DVDs, the software for so doing, iDVD, is no longer included in the iLife bundle that comes with OS 10.7 Lion (which also omitted iWeb) or will come with OS 10.8 Mountain Lion. And it is no longer included in the iLife 11 from the online Apple Store: http://www.apple.com/ilife/. Your only solution is to look on Amazon or eBay and try to get an older version that includes iDVD.
However, the vastly more expensive FCPX can burn a DVD without iDVD or DVD Studio Pro involvement, but lack the themes etc of iDVD. Also, of course, there is Roxio Toast.

Disk Utility doesn't refresh when inserting new DVDs

I'm in the process of copying a few DVDs by making an image of them first and then burning the image onto a blank DVD through Disk Utility.
After I'm done with one and insert a new DVD to copy, Disk Utility doesn't refresh to show me the new disk is in the drive. Is it normal?
If it is, is there something I can press so that Disk Utility manually refresh its listing of drives?
I find that quitting and restarting Disk Utility just to make a new image is so inefficient.

I am suddenly having the same problem. When I insert a blank disc either cd or dvd it does not show up in the left column in disc utility. I have tried closing and then relaunching disc utility but nothing. The disc shows up on my desk top but not in disc utility. I fear this is a Snow Leopard problem. Toast has no problem recognizing the disc and burning to it.

Macbook Pro: Disk Utility doesn't see my HD

Hi guys,
My Macbook Pro has been running slower lately, but I honestly didn't think too much about it...until today. It's just over a year old, running Mac OS X, and I mostly use Safari as my browser, but I have to use Firefox for my online classes. Today, Firefox froze up and quit responding, so I Force Quit it. A few minutes after this, Safari did the same thing, and then it was my entire desktop. Nothing was responding; I had to shut down by pushing the power button.
And then, it wouldn't turn back on. The chime sounded, the apple appeared, and the spinning circle underneath it. And it spun, and spun...until a generic "stop" symbol replaced the apple logo. I immediately shut it back down and did an online search. I followed every fix recommended for this issue. I tried reseting the PRAM, and then the SMC, and still the same thing happened. I tried to boot in Safe Mode, and if seemed to be working...right up until an hour passed and nothing new was happening. I shut it down again, and tried booting from the install disc of Snow Leopard. That worked, and I tried to do Disk Utility with the intention of following the online apple directive of running first aid on my HD. Except Disk Utility doesn't see my HD, only the boot disc and DVD drive. I'm guessing this is a bad sign. I tried calling Apple Care, but they are closed right now. I will call them in the morning, but in the meantime, I thought I'd see if anyone here had any advice I haven't already tried. Sadly, I haven't run Time Machine in...months. I'll end up losing a lot of stuff because I just didn't do that if my HD is toast.
Any suggestions?

Sure seems to be a failed(ing) hard drive. If you happen to get it into safe mode again, the ONLY thing you should immediately do is copy off your Home folder to an external USB disk, SD card, something. Then just get it to an Apple store for check.
Try to copy your files off first and don't try anything else to get at that disk until you copy your home folder. If the disk is failing and you're trying to do things to it you'll loose the chance to get that data.

IPod Shuffle not recognized, device not recognized, disk utility doesn't...

...disk utility doesn't show up.
It's all on my wife's computer as it's her iPod. Up until yesterday - and she didn't change ANYTHING - iTunes 7.01 had no problem wiht the iPod. Today, however, iTunes nor her Mac recognizes the iPod. Can't do a thing with it. It displays a nice green light, but that's it. All connections checked and re-checked. Looked at the disk utility and there's no image for her iPod.
I plugged it into my own Mac and iTunes 7.02 tries to upload/access her library from her iPod and 1) after an interminable wait, say four to five minutes, it recognizes that there's a shared library available, and 2) then it says there's some firewall that won't let iTunes access the liberary.
I don't have an iPod of my own, so my experience is really limited. She uses her iPod all the time and, again, hasn't done anything different than she did last night.
What is to be done? Thanks in advance for GOOD tips.

Turns out she's running iTunes 7.1...
Still nothing.
Anyone out there, please?

Airport Disk Utility Doesn't See External Drive, But Airport Utility Does?

Hey! I am a recent Apple convert and just got a brand new MacBook and Airport Extreme. I am trying to get my Maxtor OneTouch 320GB HDD to work with the Extreme, but to no avail. The Airport Utility sees my HDD, but the Airport Disk Utility doesn't? Any hints/tips on how to fix this problem? Any help is appreciated! Thanks!

All I can think of is that the drive is formatted in NTFS which I have heard cannot be read by the AEBS(Airport Extreme Base Station), but I am confirming this right now in a different message. If you can copy the files, format your drive in HFS+(the Mac's standard file system), then reload the files. See if it works and reply back.

Lion Disk Utility doesn't finish erase

Since installing Lion (clean install) disk utility doesn’t finish erasing or partitioning external disks. I used the disk utility from the install drive to erase the internal drive before installing Lion, this worked fine, but ever since it failed to erase any of my external drives. It starts of as normal but the progress bar stops half way and just never finish. Disk Utility does respond.
I tried different format options, repair and verify but none of the processes finish.
I went back to the install drive that I used to erase the internal drive before Lion install and it also didn’t want to finish.
I copied the old disk utility from Snow Leopard to my desktop, it opens with a warning, but gives the same outcome.
Any advice?

I'm having the same problem on my late 2010 Air with Lion installed over Snow Leopard.
I've tried several usb memory drives and several external harddrives...all the same problem with the progress bar getting stuck halfway. wether I select 'partition' or 'erase'.
the 'genius' at the mac store told me that he advises a clean install of Lion. I did...or I thought I did but all my files were still in place and the problem was still there. Guess I will have to wipe the drive first.
Also, unable to repair permissions on the MAC drive.
But it is remarkable how few people seem to experience this problem thus far. A google search hardly returns any results.

Disk Utility doesn't recognize HD. Installed new one, same problem.

Hello,
I have a MBP. It suddenly wouldn't boot up, and had the flashing question mark folder upon starting up, so I figured that the HD needed to be replaced. I ordered a brand new drive, and when I try to install Leopard, it doesn't see the new hard drive. I open Disk Utility to partition the drive to GUID, but Disk Utility doesn't even see the new drive. Just my optical drive is listed.
I hooked up the old hard drive externally to another mac, and it appears to be working just fine. So it isn't a bad drive as I had originally thought.
What else could be wrong? The laptop fails to see any internal hard drives. Is there anything else that I can do to fix this problem? Thanks.

Purely conjecture, your serial ATA controller may be bad (or the cable). I assume nothing shows in System Profiler/Hardware/Serial-ATA either. Maybe try the SMC reset?
-If the computer is on, turn it off.
-Disconnect the AC Adapter and remove the computer's battery.
-Press and hold down the power button for 5 seconds and then release the button.
-Reconnect the battery and AC Adapter.
-Press the Power button to restart the computer.

Disk Utility can't burn DVD !

Hi
I've used disk utility to burn a DVD but it always report this message
" Unable to burn "h-mosl1063.dmg". (the device failed to calibrate the laser power level for this media "
The DVD i am using is :
Princo
DVD - R DL
Dual Layer
8.5GB
And this is my disk burning information :
MATSHITA DVD-R UJ-875:
Firmware Revision: DB09
Interconnect: ATAPI
Burn Support: Yes (Apple Shipping Drive)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -R DL, -RW, +R, +R DL, +RW
Write Strategies: CD-TAO, CD-SAO, DVD-DAO
Media: Insert media and refresh to show available burn speeds
May anyone help me to find what's the reason of not burning ?
Thanks

Hi DaddyPaycheck
I am sorry for being late to reply you, i just was very busy.
Actually, yes, I've tried many types of DVDs, the last one was " Imation DVD+R DL " & it's failed.
In fact, I was trying to burn SNOW-LEOPARD using Disk Utility and others applications, non of them worked.
So, I think the problem isn't in the type of DVD.
I have used another computer to burn the SNOW-LEOPARD and it's done, But i faced a new problem
that is the system doesn't read the DVD and it doesn't show the option of choosing which system I
want to boot ?
I really don't know wether the problem in the SNOW-LEOPARD file that i downloaded or it's is in my
system or in the DVD reader of my MACBOOK Pro.
Really need help !

Disk Utility won't burn a .cdr image to DVD – why and what do I do?

I've burned DVDs before and I've had success with my MB Pro. I know the steps and use this support article as a refresher each time to assure I'm following all the steps. Yesterday and today I've tried to burn 2 different .cdr images made with Disk Utility to blank DVDs without success. It starts to copy and within less than 2 minutes, I get the message:
"Unable to burn 'xxx.cdr' (The disc can't be burned; it might be incompatible with this disc drive. Please try a different brand of disc, or try burning at a slower speed.)"
I tried 3 different blank DVDs (they are DVD+Rs 16x|4.7GB), 2 different brands (TDK & Sony) but no success.
What's going on and what do I do to troubleshoot and resolve this problem?
Thanks!

Neither TDK nor Sony are considered reliable or quality media. Most of us here use Verbatim DVD-R and burn at only 2x or 4x.

Disk Utility won't burn with external dvd burner!!! HELP?!?!?!

Hello anyone/everyone!
I need some help, I'm trying to burn a file using the disk utility. Only thing is that the disk utility wants to used the drive installed on my iBook (combo drive) and not my external DVD drive! I couldn't find a way to be able to chnage the default burner, and I was hoping that someone/anyone could help me out? The file is too large for a regular 800mb disk so I have to use the external dvd burner. Help me please oh wise-ones?!
iBook G4 Mac OS X (10.3.9)

Find out if the external burner is Patchburn compatible. If it is, then apply it from http://www.patchburn.de/
If not, I'd sell the external burner and get one that is compatible like those from http://www.macsales.com/
You may find other tricks on http://www.xlr8yourmac.com/ as well.

Disk Utility doesn't run from installation dvd.....

hi there:)
i ran a scheduled maintenance check using Onyx. It turned out that the disk could not be verified and it had to be fixed by inserting the installation dvd and running 'disk utility'. i inserted the dvd and ran the 'disk utility', however, it quit unexpectedly. the following message came up:
Process: Disk Utility [417]
Path: /Volumes/Mac OS X Install Disc 1/Applications/Utilities/Disk Utility.app/Contents/MacOS/Disk Utility
Identifier: com.apple.DiskUtility
Version: 10.5.8 (198.16)
Build Info: DiskUtility-1981600~17
Code Type: X86 (Native)
Parent Process: launchd [172]
Date/Time: 2008-12-28 12:28:49.499 +0000
OS Version: Mac OS X 10.5.6 (9G55)
Report Version: 6
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Symbol not found: __commpagedsmos
Referenced from: /Volumes/Mac OS X Install Disc 1/Applications/Utilities/Disk Utility.app/Contents/MacOS/Disk Utility
Expected in: /usr/lib/libSystem.B.dylib
i really want to know what to do to save my mac book!
please help
regards,
rik

Rik,
Please reread my first post carefully & make sure you follow its instructions closely. The "Repair Disk" step (not the verify one) should be run while your Mac is started up from the install disk, then the "Repair Permissions" step should be run after you have restarted normally.
Some background info that may be helpful:
Disk Utility (& all such disk utilities) must temporarily "unmount" a disk to affect a repair of its file system (which is what the "Repair Disk" step does). Unmounting a disk makes it unavailable for normal use. The disk containing the operating system that is currently running the computer (the startup disk) cannot be unmounted. This is why the "Repair Disk" button is grayed out if you run Disk Utility with your startup disk as its target.
Repairing permissions does not require unmounting the disk but it does require a healthy file system, which is why the disk repair must precede it. Apple recommends repairing permissions on the start up disk while booted from it, which is why it should be done after restarting normally.
The verify steps do not actually repair anything. They just run the checks that the repair steps run to determine if any repairs are needed & report the results of those checks.
The routine that repairs permissions is part of the OS itself. Disk Utility, Onyx, & all other such utilities that repair permissions actually just tell the OS to perform this routine. Thus, it doesn't matter which one you use to do this repair, nor is one utility any better than another at doing this. So if you prefer, after restarting after doing the disk repair from the install disk you can do the permissions repair with Onyx.

Disk Utility will not burn DVDs

Disk Utility will no longer burn DVDs. I have tried both Memorex and Verbatim DVD+R DL -- Disk Utility tells me the disks are locked, not writable, capacity 0. These are fresh DVDs right off the spindle. I am, however able to write to these same DVDs using Burn, so it's not a media problem. Tried deleting preferences for Disk Utility, tried using Drive Genius 2 to repair the HD, but it didn't show any problems. Any solution short of doing a clean install of the system?

Hi-
Will the drive read any discs?
Have you tried burning a disc at slower speed?
Have you tried a different, quality brand of disc?

Disk Utility Doesn't Seem To Give The Same Info On CDs-DVDs As It Used To?

It's not a serious problem - just a bit of a puzzle.
I only use Disk Utility occasionally but I was sure that when a DVD etc. was inserted, Disk Utility would give a rundown of Maximum size of the DVD (eg. 4.7GB), amount used (eg. 2.8GB) and space remaining.
Yesterday when I opened it , all I could get it to show about the "size" of an empty DVD-RW was:-
Total Capacity : 0 Bytes
Write Ability : Read Only (DVD-RW)
Other CDs and DVDs were similar.
There is no problem in so far as I can burn CDs and DVDs OK in spite of this apparently altered wording.
Am I imagining things or has the info layout changed slightly?
If it has, the only things I can think of to account for it are the fact that some months ago I upgraded to 10.3.9 and last month I installed Toast 7.
Can anyone shed any light ?
Ian.

Instead of using the Erase tab, select the DRIVE (not the volume indent below) and go to the Partition tab.
In the Partition tab, select a Volume Scheme (change it from Current), even if you select +1 Partition+. Click on the Options button below the diagram. Select the appropriate Partition Map Scheme in the dialog box. For exclusive use with an Intel Mac, +GUID Partition Table+ is optimum. Click OK. Name the one or more partitions. The format should be Mac OS Extended (Journaled). Click Apply.
Hopefully by repartitioning, the erase procedure will work.

Disk Utility doesn't burn DL DVD+R

Similar Messages

Maybe you are looking for