Disk utility/erase and lost HD free space

HELP!
In an attempt to clear up space from deleted files I ran the disk utility>erase>erase free space>35-Pass erase deleted files programme. Then did verify disk permissions and repair disk permissions.
Iv now dropped from 7.8GB of free space to 1.8 of free space on the HD. So that things aren't working right. Plus, I can't download music that I bought on iTunes because there isn't enough space on the HD.
How do I get all that space back? What did I do wrong?
All I was doing was trying to free up space from deleted files that Iv been getting rid of. I know that when you delete from one portion of the HD it doesn't always delete it totally off the system only the portion where you're looking at it.
HELP

Do you by any chance have FileVault enabled?

Similar Messages

7-pass, or zero out-Disk Utility Erase Free Space

Hey Forum,
I want to clear my erase free space on disk utility. And I am confused, whether to use 7-pass or zero-out? Any suggestions which one to use. Is zero out enough, or is 7-pass too much, any suggestions of whether to use either of them is appreciated, thank you.
Ala.
P.S. What are zero-out, 7-pass, and the 35 thing for and their differences?

There is no need to post the same question twice, especially in the same forum.
Regarding what you can find with Google, an overly simplified or out of date treatment of the topic may lead you to the wrong conclusions. For example, the DoD 5220-22M standard is obsolete (& never recommended a 7 pass erase to begin with) & the 35 pass erase was intended for old, pre-2001 drives.
For modern ATA drives like you will find in any Mac capable of running Snow Leopard, one or at most a few zero data passes will do all any software-based secure erase method can do.
If you need verification of that, refer to the Epilogue section of Secure Deletion of Data from Magnetic and Solid-State Memory, the seminal paper on the subject by the author of the 35 pass method.

Disk Utility - Erase Free Space-what does it really do?

Hey Forum,
I am using mac os 10.6.4 on my macbook and i have a doubting question for quite sometimes, what does disk utility erase free space feature really do? Does it gives you more free space? or what? I know it prevents the recovery of deleted files but i want to know what more it does and do not do? Like, now my hdd free space kept increasing and decreasing, by a few 100 mbs or 50mbs etc, so do i erase free space so to solve this problem? Ok, i do not only want to know does it solve the previous problem, but also the questions stated in the whole long paragraph i have wrote. If you know anything related to disk utility's erase free space, feel free to tell me!
Pls help me, I need you guys' help!
Thank you.
Regards
Ala.

Erase free space simply writes zeros over the space occupied by deleted files to prevent data recovery. That's all it does. It does not give you extra disk space.
Your disk space goes up and down a bit because the system creates temporary files and logs which take up space, such as the Safari cache. You can clear these file using a utility like Onyx (which is free)

Killed Disk Utility Erase Free Space. Now 0 available

(I erroneously posted this earlier to the Safari forum; posting here again)
I ran Disk Utility "Erase free space" on my iMac G5 250GB boot drive (I had about 130GB free). It ran for about 50 minutes, and got to "creating temp file" and then seemed to hang (thermometer didn't move for 20 minutes). So I force killed it. It seems to have left that "temp file" that takes up all available space since Disk Utility now reports 0 bytes available (and MS Entourage says insufficient free space and exits). I ran Finder "Secure empty trash" to delete 57 files with no error. But Disk Utility still says 0 bytes available.
First Aid "Verify Disk" reports no problems. "Verify Permissions" reports no problems.
Is there a way to regain my available space?
Thanks,
Ken

Restart did it. Thanks very much.
Ken

Tip on How to Monitor Disk Utility Erase Free Space

When you use the Disk Utility Erase Free Space option, it can sometimes appear to hang and the progress bar isn't always a help.
By accident, I discovered that if you run the Activity Monitor and select Disk Usage, you can in fact monitor progress. The Space Free will gradually tick down, sometimes as slowly as 100K/sec, then when it hits zero, it will quicklt tick back up. If you observe this, just let Disk Utility complete to avoid any issues; Activity Monitor makes it easier to be patiet about this.
Hope this helps.

Great tip, thanks for the post!

I am unable to install Lion. I have a Core 2 Duo iMac with 4GB of Ram and 120GB of free space - and no Bootcamp or other partitions - and yet repeatedly get the 'no recovery' error. Can anyone help?

I am unable to install Lion. I have a Core 2 Duo iMac with 4GB of Ram and 120GB of free space - and no Bootcamp or other partitions - and yet repeatedly get the 'no recovery' error. Can anyone help?

Run Disk Utility located in /Applications/Utilities before trying to upgrade to Lion in case the startup disk needs repairing.
Using Disk Utility to verify or repair disks

I have an iMac mid 2010. After Disk utilities said the drive was corrupt, I ran the hardware test (extended) 3 times. No problems. I than ran Disk utility again and got 2 messages in red-keys out of order, and --Volume corrupt, can't be repaired. I tried

I have an iMac mid 2010. After Disk utilities said the drive was corrupt, I ran the hardware test (extended) 3 times. No problems. I than ran Disk utility again and got 2 messages in red…keys out of order, and ……Volume corrupt, can't be repaired.
I tried to do a system install, but message said…disk can't be changed. Will a complete erase and install fix this ?
Everything is backed-up.

There's hardware and software.
Your drive could physically be in good condition but something has caused the file structure to be messed up (it just happens sometimes). The directory that keep track of files is corrupt. Disk Utility can help determine if that is the issue. In some cases it can repair the problem but it cannot do it to a drive that is being used to boot the system while you are doing that. You have to boot from another drive. Some things DU cannot repair and you need to try a stronger utility such as Diskwarrior.
A failing hard drive (one with mechanical issues) can be a cause of file structure issues but this is by no means always the case. Apart from looking at the SMART diagnosis feature of Disk Utility (and smart isn't totally reliable) there often isn't a way to tell if a drive is failing until it suddenly happens, which is why you need to maintain backups.
In your situation it does sound serious and not just minor directory corruption. You can try erasing (formatting) the drive, You may need to do this if it is really corrupt, in which case there could be underlying physical issues. I use old technology but if you have the patience you can try erasing the drive with the security option of writing zeros once (don't do more unless you are going on a 3 week vacation). This makes the drive not simply assume everything is okay by forcing it try every part of the drive by writing data. If something is gong wrong you may find it marks a lot of bad sectors, or flat out refuses to format. Then you know you need a new drive.

I just restarted my mac then suddenly when it boots,disk utility came and says different option like repair disk, get help, reinstall OSX and I tried to click disk repair but it says that I am um able to repair the disk

i just restarted my mac then suddenly when it boots,disk utility came and says different option like repair disk, get help, reinstall OSX and I tried to click disk repair but it says that I am um able to repair the disk

It sounds like your hard drive either has a software problem that Disk Utility cannot fix or that the HD has failed (mechanically).
Your Mac may have booted either to your recovery partition or to internet recovery in an attempt to repair the drive- I can't tell from your post.
I'll assume that it was the recovery partition.
Try to boot into internet recovery (hold down option command R at restart), and see if you can repair your HD with Disk Utility. You should also repair permissions while you're there.
If that doesn't work, try to boot into single user mode (restart, hold down ⌘S until you see a black screen with white text) and repair your hard drive. Here's a reference with directions: Repair Your Hard Disk in Single User Mode | Everything Macintosh
If that doesn't work you have a few options:
If your mac originally came with installation disks, you can try to boot from the installation disk and then see if you can repair the HD.
There is a small chance that Techtool Pro 7 will be able to repair your HD if Disk Utility can't.
If none of that works then your HD has probably failed and will need to be replaced, which is not too difficult to do yourself if you can use a screwdriver.

SQL 2000 Log and data file free space

HI ~ In SQL 2000, are there any tsql I can get the free space of the mdf and ldf file ?

I would like to look into EACH ldf too like SQL 2005 onward using sysfiles
in SQL 2000
DBCC sqlperf(logspace) will just sum all the ldf size.....
Hello,
Below would work in SQL2000.I did not tested it on 2000 ,I dont have 2000 anymore.This will give information for data and log file free space for all databases
exec sp_msforeachdb 'SELECT name ,size/128.0 - CAST(FILEPROPERTY(name, ''SpaceUsed'') AS int)/128.0 AS AvailableSpaceInMB
FROM sysfiles';
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

My iPad free space was shrinking. Previously I did an iOS upgrade and got more free space so I tried a restore and the same thing happened. Do I have a setting wrong?

My iPad free space was shrinking. Previously I did an iOS upgrade and got more free space so I tried a restore and the same thing happened. Do I have a setting wrong? There was a significant change from 4.3 GB to now 10.2 GB. I still have all the same apps, photos, songs, etc. So what's up? Why does my space not recover after I delete things?

This is what I did to resolve the issue. First I did a simple Reset (Home and on/off until the Apple logo appears) and it didn't help. Then I did a Restore with a reload from the backup and that also accomplished nothing. Then, I did a Restore as new with NO reload from backup and that resolved my issue.
IF you choose to try the same thing, here are some cautions. Make absolutely certain that all apps, music, movies, etc. are present in the iTunes library. Also make absolutely certain that all "regular" data, such as pdf files, Word files, etc. are present and accessible somewhere on the computer's hard drive. Be aware that you will probably lose all game data (scores, etc.). I did not investigate a solution for that because I don't play many games and I really don't care about the game history. Finally, be forewarned that it is a bit tedius recreating all your folders and putting each app where you want it.

Disk Utility - Erase Free Space

Hey Forum,
I am using mac snow leopard on my macbook and I wanted to erase the free space on my hard drive, so is the zero-out free space enough, or do I need the 7-pass erase free space. I just wanted more disk space, thats it. So can anyone tell me what are each options for? And do i need to 7-pass erase if i just wanted more disk space?
I await your favorable replies.
Thank you.
Regards.
Ala.

As The hatter says, the erase free space option has nothing to do with creating more free disk space -- the space is already free.
If you are confused about this, just open Disk Utility to the "Erase" tab & click the purple question mark at the bottom of the window. This will open Disk Utility Help to the topic *Erasing disks*. Refer to the last subject, *Securely erasing empty space* & if necessary click the link below it to go to the help topic *Erasing free disk space*, which explains this function in more detail.
FWIW, should you ever need to use this security function, a one pass secure erase is probably adequate to make the data unrecoverable.

Disk Utility Erase Free Space Option Nonexistant

Have an iMAC 1 GHZ PowerPC G4 256 MB DDR SDRAM OS 10.3.9. According to various google results I should be able to call up Disk Utilities>Partition>Erase>Erase Free Space. Its not there. (Its exactly where it should be on a nearby G5 running 10.5.8.).
It will allow me to erase the entire disk or either of two partitions but the Erase Free Space isn't just grayed out, it is completely missing.
1) The hard drive was partitioned at some point in the past I think to get around some admin thing. One partition has 51 out of 60 GB filled, the other has 12.4 of 16.3 GB filled.
2) Don't ask about the admins, my Entourage has been broken for 9 months - I am not joking.
3) My computer knowledge is spotty - you've been warned.
Help!

Try starting the iMac in Target Disk Mode while attached to one of your newer computers with a firewire cable. This basically makes the iMac an external hard drive. I've not tried this but you should then be able to use a newer version of Disk Utility on that drive.
[How to use FireWire target disk mode|http://support.apple.com/kb/HT1661] includes description of hardware and software requirements.
[What to do if your Mac doesn't enter FireWire Target Disk Mode|http://docs.info.apple.com/article.html?artnum=75414], also read about [Open Firmware Password Protection|http://www.apple.com/support/downloads/openfirmwarepassword.html] which can disable Target Disk Mode.
I'm not a technician but I don't think it "misses" areas, it's just more a matter of covering up what was written there before. Think of it as you write something on a piece of paper, then erase it and write something down in the same space. If you look closely you can see what was written there before. Now erase that again and write something else. It'll be pretty difficult to make out what was written there the very first time. Do that 7 times and it will be very, very, very difficult. Do that 32 times and it will be impossible. However, all that erasing and writing will take its toll on the paper and take a long time. I'd say anything more than a erase once would really have to be justified by very sensitive data. Anybody wanting to recover the data would have to use pretty specialized equipment.

Disk Utility: erasing free space

I read a recent magazine feature about file security and, based on its advice, clicked the Erase Free Space button in Disk Utility to overwrite the free space on my hard drive.
Everything ran smoothly until the last minute, when the countdown switched to "Creating Temporary File". After five minutes, a dialog box appeared warning me that the start-up disk was almost full.
I'm not concerned that I might lose material on the start-up disk since I have an external drive as a complete bootable back-up of the hard drive. But:
1. What's is being created in this temporary file and why?
2. How do I get Disk Utility just to erase the free space next time and not bother with the temporary file that seems to fill all the space (and more) that has just been cleaned?
Thanks in advance.
PowerMac G4 867MhZ Mac OS X (10.4.6) iGB RAM
PowerMac G4 867MhZ Mac OS X (10.4.6) iGB RAM

You're Welcome Norman!
I'm happy that I could help!
Also, I notice that you have not marked your topic as answered, nor utilized the Helpful or Solved options. That may be intentional, but, if you are not aware of the benefits, of using that function, here is some information.
When you mark the appropriate posts as Helpful (5 pts) 2 available, or Solved (10 pts) 1 available, you are Thanking the contributors, by awarding them points.
In threads with multiple replies, it also alerts other readers, to which answers may have been helpful, or solved the issue.
This info, and more, can be viewed by clicking on
? Help & Terms of Use, located under your login name, on all "Discussions" pages.
Specifically What are question answers?.
The Helpful and Solved buttons, that award points, are to the left of the Reply button in each response.
These are not the same as these Which do not award points, as explained Here.
Thank You, for considering extending the courtesy, of awarding stars in Discussions, as this is not a requirement, nor mandatory.
ali b

Disk Utility - Erase Free Space - Creating Temporary File Freezes

BDAqua: I tried responding to your reply to my original posting but I get an error message that I was not authorized to reply. I logged out. I can't find the original posting in my Activity so I approached from the link in my e-mail saying you had replied. Now it says the area is restricted. What's up with that?
Rod
Here's the original post:
I used "Erase Free Space" with Disk Utility after trashing several files I no longer wanted on the hard drive or recovered. I used "Zero Out Deleted Files" option. It took over 12 hours before an error message appeared "Your start up disk is almost full. You need to make more space available on your start up disk by deleting files." I thought that was what I was doing. Disk Utility continued but got stuck on "Creating Temporary File." I force quit Disk Utility after several more hours. I had to manually shut down the computer because the restart command wouldn't work. It rebooted and appears to be OK. Evidently, this temporary file consumes significant amounts of disk space. This is an older iMac with 10.4.11 (18 GHz PowerPC G5) - I know, pretty old but I still have OS 9 on it and several files I need to extract before I trash it.
1. Should I do nothing? The iMac seems to be working fine.
2. How do I know if this Temporary File exists and consuming space? Spotlight doesn't find it. Where is it?
3. Is my start up disk in fact almost full? How would I know that?

Here's what I tried to say in my response that I wasn't authorize to make:
I can't seem to reply to your response BD . . . says I'm not authorize . . . so I'll try to reply to my original post.
Thanks BD for your reply. Here's the info on the drive: 1.3 TB capacity with 1,017 GB available. Eventually I will recycle the computer at Best Buy who guarantees the hard drive will be erased. I just want to get all my files off first. I'll just do another Erase Free Space and see, as you suggest, if there are any files to be zeroed out. Maybe there aren't any. I've extracted most of what I want but am debating how to move the entire iPhoto library to an external drive so I can access it from my Mavericks machine. Can I just drag and drop the iPhoto Library, or do I need to export it somehow?

Disk Utility - Erase Free Space - Creating Temporary File Freeze

I used "Erase Free Space" with Disk Utility after trashing several files I no longer wanted on the hard drive or recovered. I used "Zero Out Deleted Files" option. It took over 12 hours before an error message appeared "Your start up disk is almost full. You need to make more space available on your start up disk by deleting files." I thought that was what I was doing. Disk Utility continued but got stuck on "Creating Temporary File." I force quit Disk Utility after several more hours. I had to manually shut down the computer because the restart command wouldn't work. It rebooted and appears to be OK. Evidently, this temporary file consumes significant amounts of disk space. This is an older iMac with 10.4.11 (18 GHz PowerPC G5) - I know, pretty old but I still have OS 9 on it and several files I need to extract before I trash it.
1. Should I do nothing? The iMac seems to be working fine.
2. How do I know if this Temporary File exists and consuming space? Spotlight doesn't find it. Where is it?
3. Is my start up disk in fact almost full? How would I know that?
Thanks!

Then I would not do any secure erasing. It's exceptionally time consuming and unnecessary. Before you take it in for recycling boot it from your OS X installer DVD. Do this:
Drive Partition and Format
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Apply button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
A one-pass Zero Data option is all that is required to prevent access to your erased files.

Disk utility/erase and lost HD free space

Similar Messages

Maybe you are looking for