Disk Utility Error-Please Help

I tried to repair my hard disk. I couldn't repair straight away as the repair button was greyed out so I varified the HD. The message came up:
*Disk Utility*
*First Aid*
*Disk Utility stopped verifying “Macintosh HD” because the following error was encountered:*
*The underlying task reported failure on exit*
The result of the varifacation was:
*Verifying volume “Macintosh HD”*
*Checking HFS Plus volume.*
*Checking Extents Overflow file.*
*Checking Catalog file.*
*Incorrect size for file objects.nib*
*(It should be 0 instead of 4514)*
4514
*ng multi-linked files.",0)*
*Checking Catalog hierarchy.*
*Checking Extended Attributes file.*
*Checking volume bitmap.*
*Checking volume information.*
*he volume %@ needs to be repaired.",1)*
*Macintosh HD*
*Error: The underlying task reported failure on exit*
*1 HFS volume checked*
* Volume needs repair*
Could someone please advise me how to fix this.
Thank you.
Simon

You can only Repair Disk from a different boot volume so boot from your Tiger installer disk, select your language and then from the menu>Utilities>Disk Utility. select your hard drive and then Repair Disk. If Disk Utility can't repair it you will need a stronger utility like DiskWarrior to rebuild the directory.

Similar Messages

  • VERIFY DISK with DISK UTILITY error PLEASE HELP

    Hi every body today i used DISK UTILITY and i tryed to VERIFY DISK and i get the following error:
    Verifying volume “Macintosh HD”
    Checking HFS Plus volume.
    Checking Extents Overflow file.
    Checking Catalog file.
    Illegal name
    Illegal name
    Checking multi-linked files.
    Checking multi-linked files.
    g Catalog hierarchy.",0)
    Checking Extended Attributes file.
    Checking volume bitmap.
    Checking volume information.
    ed.",1)
    Macintosh HD
    Error: The underlying task reported failure on exit
    1 HFS volume checked
    Volume needs repair
    is my hard drive ok ? is it going to die ?
    PLEASE HELP
    Thank you

    Hi alexandros.c;
    If after doing what Michael suggested you are still not able to repair your disk, you may need a more powerful such as DiskWarrior to repair it I have found that when the the disk has problems that the tools within OS X are unable to repair then DW usual does it.
    If DW is not able to do it for you about the only other alternative is to reformat and start over again.
    You should have a good backup before doing either of these solutions to protect yourself.
    Allan

  • How to reinstall OS X? Disk Utility error. HELP!

    My iMac failed start up normally so I have to enter the recovery mode (by holding the option key or command+R).
    After researching online, I found my mac might have been corrupted. So I tried to use the first aid option in disk utility to verify and repair it but evertime I clicked repair, it shows a message "Error: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.""
    I don't think I have a time machine backup as I tried the time machine back up option but there were no back-ups found. I can't create one now either since I'm on the starting gray screen. So I don't want to erase and reinstall since I don't have a back up.
    So then I tried to reinstall OS X (Yosemite). But after following the first few steps, when it asks to choose the disk where you want to install the OS, it either says "this disk is locked" or "cannot install on Macintosh/Recovery HD." I still have about 273 GB available.
    I've tried all this many times but it doesn't seem to work. I'm really stuck now and don't know any other option so please HELP!

    If you want to preserve the data on the startup drive, and it's not already backed up, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data, you can skip this step.
    There are several ways to back up a Mac that is not fully functional. You need an external hard drive or other storage device to hold the data.
    1. Start up from the Recovery partition, from Internet Recovery, or from a local Time Machine backup volume (option key at startup.) Launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
    If you use FileVault 2, then you must first unlock the startup volume. Select its icon ("Macintosh HD," unless you gave it a different name.) It will be nested below another disk icon, usually with the same name. Click the Unlock button in the toolbar. Enter your login password when prompted.
    2. If Method 1 fails because of disk errors, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
    3. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    4. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.

  • Adobe Photoshop Scratch Disk Full/Startup Disk Full error - PLEASE HELP

    Dear ALL,
    I have started to notice recently that when I run Photoshop CS on my Mac OSX Tiger, I am getting the Startup Disk Full error message. Never happended before.
    Since my initial post I downloaded Macaroni (utility) and have run the daily/weekly/monthly backups, checked the /private/var/vm and /private/var/log and /Volumes. Nothing unusual there...
    When I started getting this error I had 32GB left on a looked at my HD and I seem to have 32GB available on a 152GB drive. Now after deleting I have 76GB capacity left.
    But when I tried to open a Photoshop PSD or TIFF file and do a crop I still get tge Startup Disk is Full error followed by the Adobe Photoshop error Scratch Disk is Full.
    I am thinking of running the Disk Utility from the Applications/Utilities/Disk Utility and doing a Verify Disk and Verify Disk Permissions followed by Repair Disk Permissions. I will be logged into the machine whilst doing this. Is there any danger in this as I have read elsewhere that I need to do this from a bootable volume. If that is the case how do I create a bootable disk/cd? If not then what is the cure to my Disk Full as surely there is now nearly 50% FREE!!!!!
    Please help.
    Max

    PS will always use the boot disk for scratch to some extent even with an alternate primary scratch disk.
    Be sure to turn off Spotlight as it causes problems.
    4GB of RAM would be nice, I understand small files don't work well if there is more than 4GB RAM but large files will. OS X uses free RAM as cache and RAM disk before using disk drives.
    How much RAM is allocated to PS? More RAM would help.
    A dedicated lean boot drive helps. Install just what is needed for your work, use a separate drive for data, and yet another RAID volume for scratch.
    When in doubt, backup with SuperDuper, and do an erase and then restore. Always backup before repairing; and never, ever, use an old version of Tiger CD/DVD - like 10.4.2 on 10.4.7/.8. Use "fsck" instead, or your emergency boot drive.
    Also, give Applejack a shot and delete the cache folders and swap files from time to time to keep a system humming. CS/CS2 and Tiger benefit nicely from more RAM.

  • Boot Camp Assistant: Using disk utility? (PLEASE HELP!)

    I am trying to download Windows XP with boot camp and I waited for the disk to be partitioned (I'm not even really sure what that means) and then it says:
    The disk cannot be partitioned because some files cannot me moved. Back up the disk and use Disk Utility to format it as a single MAC OS Extended (Journaled) Volume. Restore your information to the disk and try using Boot Camp Assistant again.
    Okay, so I went to Disk Utility and now I have no idea what I am supposed to do. Please help!

    If you use Time Machine you can reinstall Leopard and then using the Install Disc go to the Utilities and go to the Restore from Time Machine. You can restore your new drive to any of the saved days. It would save them to the hard disk defragmented. Another program is SuperDuper! which can make a clone of your Macintosh HD to an external disc as a bootable option. This is easier and faster though this program has not been confirmed to work with Leopard yet. And as I said before you can buy iDefrag for $30 and not have to restore and erase anything. But what ever you do, make sure to back your files up.

  • Startup Disk Full Error - Please help

    Dear ALL,
    I have started to notice recently that when I run Photoshop CS on my Mac OSX Tiger, I am getting the Startup Disk Full error message.
    I have no clue as to how to correctly fix this issue. I looked at my HD and I seem to have 32GB available, which I would have thought would have been ample space. I have started to remove unwanted files and backup to CD large image files. So this should free up some more space. The question is will this be enough to get rid of this issue and is it associated with the amount of HD space on my drive? or would I need to run some script etc? or download/buy some other product to fix this?
    Your help is greatly appreciated.
    Max

    OK I tried Macaroni...and when I tried to work with a TIFF file I get the same Startup Disk is FULL message. The I get an adobe message saying Scratch Disk is FULL.
    Any further suggestions would be appreciated.

  • Installer and disk utility deleted please help

    I'm using an eMac 10.3.9 700mhz .The installer, terminal, and disk utilities have somehow been deleted from the utilities folder and I'm don't know how to replace them. I no longer have panther CD-roms, and did not think to back them up. Any ideas how I could get them back?

    the installer shouldn't be in a folder with disk utility, or not the main installer anyway. what you should do at this point is get the install disks for the current operating system and do an archive and install of the operating system. http://docs.info.apple.com/article.html?artnum=107120 make sure you run disk repair beforehand and that you fix any errors that come up. you may have to reinstall some third party applications. good luck and let me know how you're doing. Sherry

  • Windows - No Disk Error - Please help!

    Windows - No Disk Error - Please help!
    Hi,
    I have the following set up:
    * Lenovo T-61p
    * Windows XP Pro, SP 3
    * HP Photosmart 8250 printer (with nothing plugged into the various card readers, and USB slot in the printer)
    I am getting the following error:
    Windows - No Disk
    Exception Processing Message 0xc0000013 Parameters 0x75CE023C
    0x84C40C84 0x75CE023C
    I have done a lof experimenting and thru process of  elimination, and believe I have determined that this only happens when the HP Photosmart 8250 printer is plugged in to the USB slot of the computer.
    I can stop it from happening by safely removing hardware, and removing the drive that the 8250 creates on your computer when you plug it in.  In my case, this is drive E.  I'm guessing if there was something in the the various card readers, and USB slot in the printer, that's what those would be, but I don't those use those functions of the printer.
    I understand there is more at work than simply the printer, because I did not used to get this error, so some software changed as well, that is scanning all ports, and finding a drive that has no disk, and producing the error.
    A simple google search finds a lot people all over the world having this problem, and are solving it in different ways, because the suspected source is different: Norton, HP, etc.
    I have tried everything I have read, and the only thing that works was my own idea, of manually safely removing the drive the printer creates each time I plug in the printer.
    Anyone every any better, more permanent solutions?  Or know what the real root of the problem is?  What is scanning all the drives and being showing an error message because it found an empty drive?
    Thanks and Happy Holidays/New Year!

    I've been getting the same error on my 4G nano for the past week. I've had my nano for about a month and the first few weeks were fine. Tried it on 2 different computers (Vista and XP) and same problem. Tried it on a 3rd (XP) and it started ok. Problem started coming back after a day.
    I was able to find a quick fix though. I noticed that sometimes the message says something like "iexplore.exe... no disk..." even if I don't even use IE. What I do is end iexplore.exe on task manager before running iTunes and syncing my nano. I don't get the error whenever I do this, but one drawback is that the contents of my nano suddenly pops up in a window - even when disk use is not enabled.
    I've reset/restored my nano dozens and dozens of times to make sure it's clean. Leads me to believe it's a driver issue. Either that or I have a friggin malware problem I can't seem to find.
    I'll be posting updates every now and then. I'm no expert so I'm hoping an Apple expert also steps in to give some input.

  • My ipod generation 5 will not come out of recovery mode. i was simply updating my software and this happened. it will not let me restore it comes up with and error. please help, thanks.

    my ipod generation 5 will not come out of recovery mode. i was simply updating my software and this happened. it will not let me restore it comes up with and error. please help, thanks.

    Hey erinoneill24,
    Thanks for using Apple Support Communities.
    Sounds like you can't update your device. You don't mention an error that it gives you. Take a look at both of these articles to troubleshoot.
    iPod displays "Use iTunes to restore" message
    http://support.apple.com/kb/ts1441?viewlocale=it_it
    If you can't update or restore your iOS device
    http://support.apple.com/kb/HT1808?viewlocale=de_DE_1
    If you started your device in recovery mode by mistake, restart it to exit recovery mode. Or you can just wait—after 15 minutes the device will exit recovery mode by itself.
    Have a nice day,
    Mario

  • I cannot use iCloud on Windows 7, as it won't recognize my apple ID when i try to sign in to icloud it i get error saying "you can't sign in because of a server error (please help some one)

    I cannot use iCloud on Windows 7, as it won't recognize my apple ID when i try to sign in to icloud it i get error saying "you can't sign in because of a server error (please help some one)

    Although your message isn't mentioned in the symptoms, let's try the following document with that one:
    Apple software on Windows: May see performance issues and blank iTunes Store

  • HT201442 I did this but still i am getting the same error , please help me .

    I did this but still i am getting the same error , please help me .
    <Email Edited by Host>

    Look at http://support.apple.com/kb/ts4451
     Cheers, Tom

  • I am not able to update my iphone 4 ,when ever i tried to update it its show 1309 error...and at times 9006 error ,please help me ..

    i am not able to update my iphone 4 ,when ever i tried to update it its show 1309 error...and at times 9006 error ,please help me ..

    Hey alkarim2008,
    If you are having an issue with being unable to update or restore your iPhone, I would suggest that you troubleshoot using the steps in this article - 
    Resolve iOS update and restore errors in iTunes - Apple Support
    Thanks for using Apple Support Communities.
    Happy computing,
    Brett L 

  • Disk Utility Error: The underlying task reported failure on exit 1

        #!/bin/bash
          # Author : Bill Hernandez
        # Location : Plano, Texas
        # Updated : Saturday, June 6, 2009 (1:48 PM)
        # script name : setdisk_ownerenabled
        # make sure to set permissions to execute
        <hr>
        # Description :
        <hr>
        # I've noticed that sometimes when using disk utility I cannot repair permissions, or I might get :
        # ERROR: The underlying task reported failure on exit 1
        # This shell script seems to have solved the problem.
        # It worked very well for me,
        # IF YOU USE THIS SCRIPT, IT IS AT YOUR OWN RISK...
        # DO NOT USE IT UNLESS YOU UNDERSTAND WHAT IT DOES
        # After running it, it is best to restart before using Disk Utility again
        <hr>
        # Details :
        <hr>
        # After partitioning a disk using "Disk Utility", and then begin using it, at some point I would get
        # an arror message when trying to save to one of the partitions, yet when I looked at the permissions
        # everything looked fine. I would then try to use Disk Utility to repair permissions and end up with a
        # cryptic error that pretty much told me nothing.
        # I noticed that while in Disk Utility, if I selected a partition the lower LH corner of the dialog
        # showed : Owners Enabled : No
        # I tried selecting the partitions at the Desktop and doing a (CMD-I) and at the very bottom of each
        # info dialog there was a checkbox :
        # [ ] ignore ownership of this volume
        # which I would check, even after logging in as root, and I couldn't seem to get a consistent way
        # to get rid of the permissions dialog failure, so I found the vsdbutil command which can be used
        # as follows to get partition, or disk info :
        # $ vsdbutil -c /Volumes/driveor_partitionname
        # ----> Permissions on '/Volumes/driveor_partitionname' are enabled.
        # if it is not enabled you can enable the disk or partition using :
        # $ vsdbutil -a /Volumes/driveor_partitionname
        # It will set "Owners Enabled : Yes"
        # This below script loops through the mounted disks, partitions, etc. and gives you information.
        # You can leave the three flags below all set to TRUE, or selectively use what you want and change
        # the rest to false...
        <hr>
        # CHOOSE {"TRUE", "FALSE"}
        <hr>
        getvolumestatus="TRUE"         # get "Owners Enabled : (Yes|No)" status
        setvolumestatus="TRUE"         # set "Owners Enabled : Yes"
        list_volumes="TRUE"                   # show volume names
        <hr>
        # DO NOT CHANGE ANYTHING BELOW HERE
        <hr>
        if [ $getvolumestatus == "TRUE" ]; then
         echo '============================='
         echo '$getvolumestatus'
         echo '============================='
         # get "Owners Enabled : (Yes|No)" status
         for i in $( df -l | sort -u | awk '{print $6}' | grep '/' ); do
         vsdbutil -c $i
         done
        fi
        <hr>
        if [ $setvolumestatus == "TRUE" ]; then
         echo '============================='
         echo '$setvolumestatus'
         echo '============================='
         sudo echo -n
         # set "Owners Enabled : Yes"
         for i in $( df -l | sort -u | awk '{print $6}' | grep '/' ); do
         sudo vsdbutil -a "$i"
         echo "setting Owners Enabled : Yes for ---> $i"
         done
        fi
        <hr>
        if [ $list_volumes == "TRUE" ]; then
         echo '============================='
         echo '$list_volumes'
         echo '============================='
         for i in $( df -l | sort -u | awk '{print $6}' | grep '/' ); do
         echo $i
         done
        fi
        <hr>
        

    As it turns out, this didn't completely solve the problem, it solved part of the problem.
    Here is a summary to the root cause of the problem.
    SUCCESS...
    Problem Summary : The system crashed and would hangup during boot, tried many things, until I eventually erased the disk and started over again.
    iMacG5 24 GHZ Intel with One internal disk partitioned into 3 logical drives
    Cub_1 OS X 10.5.7
    Cub_2 OS X 10.5.7 (Carbon Copy Cloner backup of Cub_1)
    Cub_3 OS X Server 10.5.7 (standard os x server setup)
    At some point after setting up standard preferences, OS X Server crashed.
    When I tried to restart, the machine would hang up during boot.
    Finally after several attempts, ran Disk Utility from install dvd and repaired Cub_3
    When I tried to run "Repair Permissions" on Cub_3 from install dvd, I got an error
    Disk Utility Error: The underlying task reported failure on exit 1.
    Rebooted, and started in single user mode (CMD-S) during boot until I saw the unix commands on the screen
    RAN : root # fsck -fy
    Then I began seeing the same command filling the screen :
    posix_spawnp("/usr/sbin/mDNSResponder") could not find file or directory
    Called Enterprise Support and spoke to Frank Alcorn, he said this was most likely a permissions problem and asked me to try repairing permissions from the install dvd. I told him about the error, but nevertheless I tried it again and got the same Disk Utility Error: The underlying task reported failure on exit 1..
    He asked me to try booting into single user mode again, and to try
    root # chmod 775 /
    root # reboot
    During the reboot process the machine got hung up again, and could not get the single user mode to work at all.
    Frank said the command needed to be :
    root # chmod 1775 /
    Frank asked me if I had changed anything in file sharing, and I told him I had. He asked me what I had shared, and I said the entire drive Cub_3. He asked me what I had done for permissions, if I had denied permissions to anyone. I told him that I had set myself up as the only user that could have access to it, and when he said that's where the problem was the lightbulb went off, and it made sense.
    Shortly after I set the sharing preferences is when the server crashed. It all makes sense now...
    Frank said not to share the entire disk, only portions (share points) of it. I had done this in Panther Server, and Tiger Server and it worked fine, but apparently Leopard Server works a little differently, maybe more secure.
    It seems to me that if sharing the entire disk, which is what I needed would cause such a problem there should have been some sort of warning from the operating system, but there wasn't. I had run into this problem several times over the past three weeks since I had started working with Leopard Server, but in each case I ended up re-installing OS X Server and starting over again.
    I told him I would try to reboot from the OS X partition (Cub_1) and try it from there.
    He asked me to let him know if it worked, and I said I would...
    Problem FIX :
    I booted back into the partition containing OS X (Cub_1) and did the following via the Terminal.
    $ su - root
    $ chmod 1775 /
    $ reboot
    During the reboot process I held down the (OPTION) key, and selected Cub_3 (the os x server partition) and sure enough after a few minutes of holding my breath the login window magically appeared. So I logged in, and did not have to re-install the server. Hallellujah....
    This solved the boot hang problem. It is great to finally have an answer. In retrospect it makes sense, but that's why its hindsight...
    The reason for sharing the entire disk in my mind was that since I was the only user on the system, it was easier to have one disk mounted on my workstation rather than several folders. It made sense to me, it still does. I don't need a bunch of folders, just one disk is easier...

  • My iphone won't pass the connect to itunes. when i try to restore is says that there is an error. please help!

    hi my iphone is broken. it won't pass the connect to itunes. when i try to restore is says that there is an error. please help!
    thanks,
    jg2013
    <Subject Edited by Host>

    Hello, 02633. 
    Thank you for visiting Apple Support Communities. 
    If your iPhone is disabled, you will need to process the steps in the article below.
    iOS: Forgotten passcode or device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    Cheers,
    Jason H.

  • HT4623 I have updated my iphone with the current software but it is showing you need to connect to  of itunes to activate your phone, when i did that it is continuously showing an error.please help me to get through.

    I have updated my iphone with the current software but it is showing you need to connect to  of itunes to activate your phone, when i did that it is continuously showing an error.please help me to get through.
    Kindly Activate my phone.

    Rajan Gupta wrote:
    ...it is continuously showing an error.
    See here  >  http://support.apple.com/kb/TS3424
    Also see this discussion.
    https://discussions.apple.com/message/21189708

Maybe you are looking for

  • Capturing error records and messages in BDC ?

    Hi Experts, I am recording a infotype using BDC recording and I got successfull updation in recording.But I  dont want the output message generated by BDC recording which is obtained by perform bdc_transaction using 'pa30' generated by recording. I w

  • Serial number invalid CS2

    i am having trouble loading CS2 on my new HP i7 which has windows 7 on it. I have the original CS2 premium which i purchased 9 years ago. firstly i loaded it from the CD. it then was giving me a problem to register. eventually after googling it said

  • Trying to find mounting bracket

    I am tring to find this metal mounting bracket so I can connect my ThinkVision monitor directly to my docking station instead of having it sit on the stand. Someone else in my office has one, so I know they exist.  Here is a picture of what it looks

  • HT1849 what can i do if there's a song thats not playing it properly after purchased

    the song i purchased on itunes was not playing properly as it suppose to. so is there any way i can fix that?

  • MR11_GR/IR difference

    I got the below issue. What are the possibilities to get the difference. The MR11 code Maintain GR/IR clearing account does not balance to a GL enquiry for account 210100. This is out by £3474.08. The MR11 is excluding the following items PO 45000017