Disk utility filesystem verify or repair failed

hi this is my first time need some help. I ran disk utilty and got this first aid failed invalid directory item count, error filesystem verify or repair failed,it should read 35 instead of 34 mac hd needs to be repaired. I also have a 13 inch mac book and get the same error. Im not sharing the book with the i mac the only thing i did was apple updates to both i wonder if this caused this

Two ways of going about this:
Try a Safe Boot -- hold Shift Key down at startup -- it will take longer than usual to boot as it's checking and repairing the directory, if possible. If it finishes on a screen with Safe Boot in red, you should be OK, but go back and verify again from DU.
Sometimes, the errors reported from DU verify, as it is performing "Live Verification," may be spurious. Better to check with DU Repair Disk booted from the DVD.
Boot from the Install DVD by holding the C key down at startup.
See "Try Disk Utilitiy"
http://support.apple.com/kb/TS1417
If it reports failure, try it a few more times.
If that doesn't help, you need stronger medicine. Available at the Apple Store.
Disk Warrior
Message was edited by: WZZZ

Similar Messages

Disk Util"Filesystem verify or repair failed"& failed hardware test w/CD

Calling all mac gurus...
My trusty MacBook Pro is starting to play up. i.e. crashing unexpectedly & at random, no particular program can cause the screen to dim and a box come up in different languages saying you must restart with a pic of the power button.
the probs started around/after I deleted XP from the laptop, and ran the system upgrade(from 10.5.6 to 10.5.7)
Disk Utility: I run the verify disk on the system volume. results with error:
2009-08-08 17:46:04 +0100: Verifying volume “Macintosh HD”
Starting verification tool: 2009-08-08 17:46:04 +0100
2009-08-08 17:46:04 +0100:
2009-08-08 17:46:05 +0100: Performing live verification.
2009-08-08 17:46:05 +0100: Checking Journaled HFS Plus volume.
2009-08-08 17:46:05 +0100: Checking Extents Overflow file.
2009-08-08 17:46:05 +0100: Checking Catalog file.
2009-08-08 17:46:30 +0100: Invalid extent entry
2009-08-08 17:46:42 +0100: 2009-08-08 17:46:42 +0100: Incorrect block count for file CACHE_003
2009-08-08 17:46:42 +0100: 2009-08-08 17:46:42 +0100: 2009-08-08 17:46:42 +0100: (It should be 279 instead of 282)
2009-08-08 17:46:42 +0100: Checking multi-linked files.
2009-08-08 17:46:58 +0100: Checking Catalog hierarchy.
2009-08-08 17:48:28 +0100: Checking Extended Attributes file.
2009-08-08 17:48:28 +0100: Checking volume bitmap.
2009-08-08 17:48:28 +0100: Checking volume information.
2009-08-08 17:48:28 +0100: 2009-08-08 17:48:28 +0100: The volume Macintosh HD needs to be repaired.
2009-08-08 17:48:28 +0100: Error: Filesystem verify or repair failed.2009-08-08 17:48:28 +0100:
2009-08-08 17:48:28 +0100: Disk Utility stopped verifying “Macintosh HD” because the following error was encountered:
Filesystem verify or repair failed.
2009-08-08 17:48:28 +0100:
I have also run a hardware test after the disk verify didn't work from the install cd.
results on hardware test:
Last Run: 3/08/09 4:24 PM
Version: 3A134
Test Suite: Extended Test
Loop Count: 2
Result: Failed
Failure code: 4MEM/12/40000000: 199640c8
Any help would be much appreciated. as I use this Laptop for work, and cant really send it away anywhere to be fixed.
Message was edited by: Mß

Mß wrote:
so, I have done re-install from the OSX disk - the first time it failed. I think because I selected the option to keep the user profiles/settings etc, may have been a conflict between vers on OSX CD and vers on HDD? I don't know.
No, it can do that. There are clearly other issues.
anyway an error came back saying the disk was corrupt
The install disc or the HD?
now I thought that sorted it. but after doing the updates. and then going to repair the disk permissions/repair the disk it came back with same error. and also the hardware test is still failing.
The system will never be stable until the HD directory is repaired.
- is the version of the hardware tester I have not compatible with the OS or the firmware i have upgraded to? or does the tester just check the integrity of the hardware regardless of firmware & os vers.
If this is the AHT disc that shipped with your MBP, it is fine, regardless of what OS you have installed.
I really would prefer to not start from scratch again. But could this be an user account problem?
No.
I'll set up a new usr acct and use that for a while. just a pain to bring the files over from my current usr acct to the new one.
I believe that's a waste of your time. As has already been stated, at least one of the issues is the damaged HD directory. Until/unless that is repaired, what you install on the HD isn't going to work correctly, if at all. The big question is, is some other part of the hardware causing the directory damage, or did the directory take a freak "hit" and repairing it will resolve things? It's quite possible that bad RAM or the logic board could have caused the directory damage. You're either going to have to bring it in to an Apple Store "genius" bar and see how much they'll test for free, or do some things yourself. For things you can do yourself, apart from trying one RAM module at a time, and running Repair Disk repeatedly (I don't think that's going to do it), you're going to need to either get your hands on Disk Warrior (or comparable utility), or a different HD, or try the HD in an external enclosure, or get your hands on some different RAM to try.

WD External disk Error: Filesystem verify or repair failed

Hi all
My Western Design external hard drive has started to run really slowly when accessing data as well as transferring. After plugging the usb to the mac it takes about 30 seconds to pick up the drive with a DISK ERROR message. I have been into disk utilities and tried verifying the disk and repairing with the following message coming up...
Verify and Repair volume “LEILA”
** /dev/disk1s1
** Phase 1 - Preparing FAT
** Phase 2 - Checking Directories
Unable to read directory (Input/output error)
Error: Filesystem verify or repair failed.
Details of the external follow:
Disk Description : WD Elements 1023 Media
Total Capacity : 465.8 GB (500,105,740,288 Bytes)
Connection Bus : USB
Write Status : Read/Write
Connection Type : External
Partition Map Scheme : Master Boot Record
Any help would be appreciated
Thanks

It sounds like your WD drive is failing. Download Smart Utility from http://www.volitans-software.com/smart_utility.php and see what it says about the health of the drive.
If you scan various discussion groups, you'll see issues with WD external drives, as the electronics can be problematic.

Disk Utility: FIlesystem verify/repair failed

I get this message when I try to run Disk Utility:
"Verifying volume “Macintosh HD”
Performing live verification.
Checking Journaled HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume information.
Invalid volume file count
(It should be 763103 instead of 763104)
Invalid volume directory count
(It should be 183470 instead of 183469)
The volume Macintosh HD needs to be repaired.
Error: Filesystem verify or repair failed."
What should I do?

To add to my former post...
Applejack a free (ie donationware) program fixed my Filesystem, directory and Volume structure problem! YAY! I found the program and a good review of it at Macfixit after I was googling around about the Flash Plugin problem. BTW that was fixed also...
I am SOOO Happy! The other recommendation by a lot of the gurus on this site was to purchase DiskWarrier which cost 100 buckeroos! Sounds good but APPLEJACK is free!
You do need to go into single user 'root' mode which is a scary place for non-pros to be. But it was simple to do and very fascinating to watch it work. You do have a choice whether to have the fixes done in 'auto' mode or interactive which does each step separately. MacFixit suggested to do it on the interactive mode at least the first time. So I did.
It found all kinds of garbage and WAY more stuff like corrupted files etc. It sequesters them so you can take a looksee before trashing them...nice. And it was able to repair permissions that diskutility could not. I did a repeat of the 'verify disk' etc and got a clean bill of health.
Now I must go back and donate a few bucks and send a thank-you to the developers of Applejack! I hope this helps another freaked out Newby like me! Ciao!

Disk Utility: First Aid Failed, Filesystem verify or repair failed

Ouch,
So for some reason podcasts suddenly stopped downloading to my external music HD. Checked the permissions on the HD and it wasn't giving me access to the permissions even though I had permissions. Ejected the drive, mounted, ran Disk Utility and got the message above (subject of this post). The details box says the following:
Invalid Sibling Link
Volume check failed.
Error: Filesystem verify or repair failed
So.... is my external drive dead? Can it be fixed? Is everyone going to recommend pro tools and disk warrior again? Anyone that has a bright idea, I am all ears. I have Time Machine running, but I am not sure how I would restore the drive from that and get my data back. Any help would be greatly appreciated!!

Well, oddly, it just fixed itself. "Bogus" you say? It is really odd. It just mounted itself, all my audio is working and podcasts writing to the drive again. I ran disk utility again and it ejected the drive and I got the same error message. I'm getting tons of conflicts on my system ever since I did my clean install of Leopard, so I imagine it has something to do with that.

Disk Utility error msg: Filesystem verify or repair failed!!!

Ok so after erasing my partitioned HD I wanted to use the rest of my HD on my start up HD, So I pulled the expander in the partition window to resize the volume of the HD. Then I clicked apply to resize the HD and ended up with a Partition Failed message that stated
Partition failed with the error:
Filesystem verify or repair failed.
What do I do from here to get my current HD at full capacity?
The current size is 19.9 GB and it should be at 60 GB.

Ok, so I had a partitioned hard drive, and I wanted to expand the start up drive and delete the unnecessary partition. So in disk utility I clicked on partition and deleted the partition I didn't want.
Then I used the expander thing in the bottom corner of the start up hard drive box and clicked apply to enlarge it, but filesystem verify or repair failed message appeared.

Disk Utility Error- Filesystem verify or repair failed.

I ran Disk Utility and before it finished I received Filesystem verify or repair failed error message.
It says to run repair but I can't
HELP!!! What do I do? What is wrong?
Thanks

Hi , and a warm welcome to the forums!
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.

I think I may have a virus on my MacBook laptop, ran disk utility, "filesystem verify failed." Help!

I'm running a MacBook laptop and thought I might have a virus b/c i was browsing online a couple of days ago when i clicked on a link that appeared to automatically start downloading a file. I tried to stop it from downloading by clicking "cancel" in the downloads box that came up, but it compleatly downloaded before i could hit cancel. No programs automatically opened and started runnning (that i could see), but I've noticed slow browsing since then.
I ran the disk utility, "verify disk," to see if there were any problems. It came back with this error message: "First aid failed: Disk Utility stopped verifying "Macintosh HD" because the following error was encountered:
Filesystem verify or repair failed"
The text is black inside the verifying history box until the last three lines, which say in red:
"Invalid node structure
Volume check failed
Error: Filesystem verify or repair failed."
Does this mean I have a virus? Are there other things I can do to confirm that I do or do not have a virus? How do I fix this problem?
I'm running Mac OS X 10.5.8.
Many thanks for your advice/comments in advance.

Probably because the directory on the disk is corrupt.
The error "invalid node structure" is one that will take either DiskWarrior or a reformat to fix.
It has not to with any malware.
Allan

TS1367 I have MacOS 10.5.8. It is not booting. It stops at the blue screen. I used the disc utility - verify disc. I get the following message - Invalid sibling link. Volume check failed. Error: Filesystem verify or repair failed. Please give a solution a

I have MacOS 10.5.8. It is not booting. It stops at the blue screen. I used the disc utility - verify disc. I get the following message - Invalid sibling link. Volume check failed. Error: Filesystem verify or repair failed. Please give a solution anybody?

Many times I tried to simply update from 10.5.8 without any success. It starts and after few minutes ...
I used many different install disks (I bought ofiicial release from Mac seller), so I think this is not a problem with wrong version or bad install disk. A few days ago I've got back my computer from Apple technical support and technician told me he had this same problem with system installation

Disk Utility: Filesystem verify failed

Received the following message when trying to troubleshoot iMac freezing up:
Disk Utility stopped verifying “Macintosh HD” because the following error was encountered:
Filesystem verify or repair failed.

Be sure to backup your hard drive to an external drive.
Use SuperDuper! or Carbon Copy Cloner.

External Hard Disk Error - Error filesystem verify or repair failed

Hi
I can't seem to mount my WD external hard disk. Run Disk Utility and these are the error messages:
Invalid node structure
Invalid node structure
Catalog file entry not found for extent
Volume check failed
Error: Filesystem verify or repair failed
Does anyone know what is wrong and how do I fix this problem? Is it a hard disk failure? Will I be able to recover my data? Thanks!
_These are are hard disk specs:_
Manufacturer: WD
Model: 0x1103
GUID: 0x90A90464263DC1
Maximum Speed: Up to 800 Mb/sec
Connection Speed: Up to 400 Mb/sec
Sub-units:
My Book Unit:
Unit Software Version: 0x10483
Unit Spec ID: 0x609E
Firmware Revision: 0x1028
Product Revision Level: 1028
Sub-units:
My Book SBP-LUN:
Capacity: 931.51 GB
Removable Media: Yes
BSD Name: disk1
Mac OS 9 Drivers: No
Partition Map Type: APM (Apple Partition Map)
S.M.A.R.T. status: Not Supported
My Book Device Unit:
Unit Software Version: 0x10483
Unit Spec ID: 0x609E
Firmware Revision: 0x1028
Product Revision Level:
Sub-units:
My Book Device SBP-LUN:

You will need Disk Warrior to fix the problem if Disk Utility cannot. However, to fix with DU you need to do this:
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

Unmounted External Hard Drive, Error: Filesystem verify or repair failed

Earlier today, I disconnected the external hard drive while it was working.
Now, the External Hard Drive won't even show up on my computer. However, on the Disk Utility it does. I have tried to verify & repair the disk. Plus click the mount button nothing work.
Whenever, I ran the system verify or the repair. I got this error: Error: Filesystem verify or repair failed
Ok. So I have searched all over the internet and forums. Tried everything. Nothing works.
I even tried Disk Warrior. It would work for a while, then when it came to step 8. It would make my computer go black and hold down the power button to restart.
Any suggestions? Please let me know, I would like to recover the files if I can. Thanks.
P.S.Yes I have tried to restart multiple time. I have tried with my USB 2.0, firewire 400, & 800 too.. Nothing.Everyone except the USB shows up in the disk utility but doesn't mount.

I have had the exact same situation occur, but was able to follow these steps to successfully save everything!!
The Unix program "dd" will instruct a drive to stream out all of it's data from beginning to end without regard to file structure, therefore creating an exact block-for-block duplicate. By doing this, it will allow you to copy everything off without having to mount the drive. It also ignores any corruption or physically damaged blocks on the drive which would otherwise crash or freeze the Finder. It saves the data to a disk image file which you can then open and use without fear of imminent failure (the format of the disk image will be the same as the original drive). Now that the data is preserved, you can safely go through and recover your files. Keep in mind that if a file was damaged or corrupted on the drive, it will be unusable, but at least you'll be able to get to the good ones safely. In my case, using "dd", I had no problems and got every file off. If it doesn't work for you, at least it's impossible for just trying it to further damage your files. I can recommend a few other remedies if this doesn't work for you.
Note: The computer must be able to at least recognize the drive. That means either 1) It mounts 2) When you connect the drive the Finder asks if you want to erase or ignore, click ignore and you should be able to do this, or 3) Nothing happens in the Finder, but the volume in question does appear in Disk Utility. If you connect the drive and absolutely nothing happens and it never shows up in Disk Utility, it won't work.
Note: As always, it is suggested that you backup important data on your startup disk before proceeding with stuff like this. It is possible to wipe a drive by mistyping a terminal command, so double check before you hit enter.
_Now, on with the show!_
Prep: Restart your machine so that it goes straight to the login window. Enter your user name and password. As soon as you press enter after your password, immediately hold down the shift key until the Finder finishes loading (this prevents any background startup items from running that might interfere).
1. Attach the drive to the computer and make sure you have another drive with enough free space to hold the entire capacity of the bad drive, not just it's used space, but the WHOLE size of the bad drive (for exception, see very bottom of this post).
2. In Terminal, type:
+diskutil list+
Look for the drive you want to recover in the "name" column, then write down it's "identifier" (ex. disk1s2)
3. In Terminal, type:
+dd bs=512 if=/dev/disk#s# of=/my_directory/image.dmg conv=noerror,sync+
!! Replace "disk#s#" with the identifier you wrote down before !!
!! Replace "/my_directory/" with the path to where you want to save !!
!! Replace "image.dmg" with the name you want to give the disk image (must end with .dmg) !!
4. To confirm that something is happening, open Activity Monitor (in the Utilities folder) and click "Disk Activity". Once you determine an average transfer rate, divide the size of the drive by that and then divide by 60 to see how many minutes it will take to finish. *+! ! FOR LARGE DRIVES THIS WILL TAKE A VERY LONG TIME ! !+* To be safe, do not use your computer for anything until the process finishes, you can leave Activity Monitor open so you can see when it's finished.
If you're only really concerned about a certain files and you know their exact path on the bad drive, let me know and I can give you modified instructions to copy just those files, saving the time and space of doing the whole drive.

Reboot lafter 10.5.8 2@1TB drives - "Filesystem Verify or Repair failed".

BACKGROUND:
Ok so I upgraded (patched) Parallels a couple of days ago, but didn't reboot yet (I was busy). Then I see the auto update showing me 10.5.8 so I grab that and it's sitting there waiting for me to reboot.
I have 4 browsers open (not windows, browsers - firefox, camino, safari & flock) for about a total of 40-50 windows. parallels is open, excel and word are open and so is thunderbird, iPhoto and a few other random things including time machine (once open I tend not to shut them down). So the systems decides it's had enough and crashes hard (to reboot) it looks like it come sup clean except I get a message about one of my 1TB drives is unavailable but mounted so I can recover data.
I tried to run disk utility to get it back online but I get Invalid inode structure, "Filesystem Verify or Repair failed". I reboot, same. I shutdown, power off, the same. I try my 10.5.6 CD, the same.
I reboot again and go into disk utility and I try to repartition one of the failed drives (time machine drive) and that fails but it does mount the drive so I can read it.
I try to repair the other failed drive and in the meantime I get an external 1TB drive to see if I can recover the time machine data to an external location before I try to putz with it again.
QUESTION:
So anyway any ideas how to get these drives to come back up clean? I'm not so concerned with the data as I run multiple copies of the data across a NAS and two of the three drives. fsck is just not getting me ther as I can't reliably get the drives remounted.

Ok I tried to verify the two drives. One failed to umount (that's ok, more later) and the other umounted but failed to verify.
I attached an external 1TB drive. Formatted it and fired up Synk Pro. I dropped all of the directories from the failed disk into Synk and pointed it at the external drive.
I'm going to bed now and expect Synk to have copied my data from the failed drive by morning. If that all goes well then I'll grab another external drive adn see if on reboot the other disk comes up (it's the time machine disk). I'd like to recover all of that and then repartition the drive that is now working (kinda) and put the data back. I'll also grab a copy of DiskWarrior and see if I can get the second drive back online.
More later.

My macbook doesn't turn off and filesystem verify or repair failed

My macbook doesn't turn off unless I take out the battery, which I did not do at this time. Used disk utility and it came up with Error: filesystem verify or repair failed. Missing thread record id=2099508. Incorrect number of thread records. Invalid file count. Should be 1042169 instead of 1042170. The volume needs to be repaired - 7%. Okay, shall I take out the battery, then put it back in, and on startup press D and do a hardware test? Or what? Thank you. Ellen
These are the MacBook's specs:
Processor Name:
Intel Core 2 Duo
   Processor Speed:
2.4 GHz
   Number Of Processors:
1
   Total Number Of Cores:
2
   L2 Cache:
3 MB
   Memory:
2 GB
   Bus Speed:
800 MHz

Sorry I didn't reply sooner. I had work to do on my computer, and I didn't want to rsk messing around with it until I finished. So, I removed the battery in order to turn off the computer, then restarted it , holding down the D key at the same time. The computer started up, but no screen came up to continue. So I again removed the battery, though I did first try shutting it down the correct way, and aain restarted with holding the D key down. Nothing happed no hardware test. So, everything is backed up now, and is my next step to insert my Mac OS X install disc 1, or do I earase everything and install it,? And am I supposed to install the disc while holding down the C key?
Thank you.
Ellen

Using fsck on internal slave bus and "Filesystem verify or repair failed"

Hello-
I had to move quite a few files today and in the blink of the eye, I lost my internal 200gig drive on the slave bus. Disk Utility sees the disk but will not mount the volume, giving the error "Invalid B-tree node size: 2010-08-08 22:24:33 -0500: Volume check failed. Filesystem verify or repair failed." Stellar Phoenix sees all the files but I can hardly afford $99 at the moment.
Can I reboot in Safe Mode and access the slave drive through fsck? Or is fsck -fy only for the startup drive?
Thank You.
Rick

Unfortunately, fsck cannot repair that error any more than Disk Utility. You need Disk Warrior to repair the drive assuming it's even repairable.

Disk utility filesystem verify or repair failed

Similar Messages

Maybe you are looking for