Disk Utility Freeze when using New Image

Has anybody experienced the following?:
my system:
Brand new Mac Pro 8-core 2.66GHz
24GB RAM
Snow Leopard 10.6.3 freshly installed
Apple SuperDrive DVD
I am in the process to install a lot of software and I like to make Disk Image of the software DVD to make things quicker to install.
Now what happens is that as soon as I select New Image from Disk Utility (after selecting the DVD on the left menu), the New Image progress window appears and then Disk Utility freezes. The disk image is being created in the background, but the progress window DOES NOT show the disk image status and eventually I have to OPTION-APPLE ESC from Disk Utility.
What I have tried is:
. delete plist for Disk Utility in Preferences
. repair permissions in SAFE BOOT mode
After that Disk Utility/New Image will work the first time as expected, and then the next time I am getting the same problem.
Any ideas what I could try to diagnose/fix this problem?
Thank you!

Thanks for your feedback.
As far as making a disk image or not, yes it takes some times to create it... longer? I am not sure because when you install a software there is a back and forth reading/writing, whereas when you create your disk image it does the reading and writing in a linear fashion... anyway to me the big benefit is when you have more than one disk part of an install (Apple FCS, Adobe CS, etc...) once you have created all your disk image, it will install everything automatically without having to feed each disc... and usually I have to do a fresh install later on... and finally it gives you a backup of your software...
Thanks again.

Similar Messages

Disk Utility freezes when opened

Hello, I just purchased a new Ipod shuffle and its not cooperating with itunes. I figured I'd reinstall itunes, but the disk image of the latest itunes that I downloaded won't open. It flashes once when I click on it then nothing. So I opened my disk utility and that says "Gathering disk information" but it doesn't continue. Anyone know whats going on?

Hi rnemling, fellow CAian, Welcome to Apple's Users Help Users Forums.
Glad you got it solved. But I am puzzled by your two accounts open comment. You can have many accounts available but only one open at a time. (???) Go y
to System Preferences / Accounts where the active account will show in blue and the others will be listed.
Thanks in Apple Forums is through the Stars system. See the blue box at the top of the thread as well as the Apple emails re new posts to the thread.
With the buttons just to the left of "Reply" for the OP = Original Poster.
1 Green Solved available. 10 pts
2 Gold Helpful available. 5 pts.
Mark the buttons at the appropriate post.
Joyous Computing, JP

Disk Utility Freezes When Verifying HD

Not sure what's gone wrong here--hoping you folks can help me out.
I wanted to make sure my OS X directory was in okay shape, so I tried to "verify disk" using Disk Utility. After a few seconds, the application becomes completely unresponsive. Activity Monitor shows the process as "Not Responding" in red. Attempting to quit the process locks Activity Monitor. Shortly after, the entire system is frozen.
I've deleted the preference files in my home folder, but that didn't change the behavior.
The same issue occurs in my mother's account.
I booted up from my install disc and tried to repair the disk. It failed with the error "The Disk 'Macintosh HD' could not be unmounted. I then clicked the "verify disk" button, and my disk "appears to be OK."
Any ideas what's causing this unusual behavior? I'd like to get things working as they should, if possible.
Oh, and this is my MacBook, running OS X 10.5.6. The Macintosh HD partition is 66.9 GB & 12.36 GB is free.
Just realized I haven't repaired permissions; going to do that now, then try again and see if repairing permissions makes any changes.
~Lyssa

DaddyPaycheck:
I'm running DU from my computer. It came with Leopard installed (I bought this computer last spring). If I'm running it from my computer, I should be running the latest version then, right?
Carolyn:
*Are you referring to the com.apple.DiskUtility.plist?*
Yes, that's the one! I deleted it, then tried running DU to verify the disk again, but the same issue occurred--the application froze.
*"Oh, and this is my MacBook, running OS X 10.5.6. The Macintosh HD partition is 66.9 GB & 12.36 GB is free. 12GB out of 70 is cutting it kind of close. You really need to be in the 10 to 15% free drive space range minimally."*
If I've calculated things right, I should have about 10GB free in order to have 15% of my drive free. I know I'm cutting it a little close, but this is the best I can do, for now.
As mentioned in my initial post, I can't repair the disk. Disk Utility fails with this error: "The Disk 'Macintosh HD' could not be unmounted." The Verify Disk option does work, and comes back with the report of "The Disk appears to be OK."
I used BootCamp to partition my drive for Windows, so I can't repair the entire drive, just the "Macintosh HD" portion. S.M.A.R.T. status is verified.
I'll give the AHT a go after I get home from class later today. I'll also try the steps in the article you linked--thanks!
If you folks have more suggestions, let me know.
~Lyssa

Mac freezes when using Core Image apps (iMaginator, Lineform-) but-

… not with Apple Core Image apps like iPhoto or Aperture.
The computer freezes and after rebooting and checking the logfile, it says :
Sep 14 20:06:46 PowerMac-G4 kernel[0]: ATIRadeon9700::waitfor_rbspace: Overflowed block waiting for FIFO space. Have 2, need 5. RBBM_STATUS 0x8401c100
I've upgraded my G4 AGP with a Radeon 9800 pro. It seems to be a driver issue or a Core Image bug. After talking with an expert from Strange Dogs, it could be a driver issue concerning especially the G4 AGP and the 9800 pro. Does some one know something about this problem ?
Thank you very much.

Hey, what os version are You using ?
It's possible that it's hard drive but also its possible that is just ram.
Get same software for disk test and check whats the time for accesing data.
Also you might check ram, easest way is to open any file document and just copy any text with cmd+c cmd+v
to the moment the ram would be almoust full then remove all text. if it crashes then it seems that its ram

Disk utility freezes when partitioning HD

I cleared off some space on my hard drive to create a 20 GB partition to install Mountain Lion (I'm running Snow Leopard). This leaves about 15 GB free space on the old partition. Every time I do this, the system freezes after 10-20 minutes and I have to reboot. I repaired the disk and disk permissions, but nothing seems to help. Any suggestions?

the system freezes after 10-20 minutes
Repartioning a drive takes under a minute, because it clears out at most 1000 blocks in each new partition, not the whole drive.
That drive has probably failed. Buy yourself a new drive, they are cheap, and do not delay your project waiting for this (likely bad) drive.
Once you have your changes in place on a new drive, you can test the old drive by re-writing all blocks with Zeroes to test whether the drive can be salvaged. And this can be done in the background on a working System.

Lightroom 2.1 freezes when using new Gradient tool. (Mac 10.5 Leopard)

In the Develop Module, when I click the Gradient tool and apply it to an image, the "Beach Ball" appears and program freezes. When I go to "force Quit" the application, I see: Lightroom (Not Responding).
Running on IMac 24", 2.4 intel, 2GB Ram.

I took the plunge and while I've only edited a small series of images - 2.1 RC appears to be usable - thank you, Adobe engineers. I haven't gone hunting bugs, but previously the bugs were hunting me. More like ambushing at every mouse click.
I wanted to quickly mention that this forum has some seriously trigger-happy Adobe defenders. I realize that there are annoying know nothings out there, that don't run well maintained systems and blame the first hiccup on Adobe, Apple, MS or whoever. But sometimes the code is bad. I was pretty unhappy after paying the upgrade and getting what I felt was a useless beta, but the sting in the tail was the pushback on the forum. I don't spend enough time here to know the regulars from the visitors, so maybe it's just the usual wacko brand loyalists dropping by.
Recap: 2 Macs running latest Leopard and LR1 with no probs. Loaned Adobe some $ so they could develop some software while I upgraded to LR2. Beachballs started raining down on me, I troubleshooted on one system, everything short of a system reinstall, LR2 still useless on both. Downgraded to LR 1.4 so I could deliver work to clients. After reading this thread I installed 2.1 RC and no more beachballs on both systems. I feel pretty comfortable on where to assign hiccup blame. I'm blaming myself too, for upgrading. Adobe isn't getting a dime from me for CS4 or LR3 unless Apple 'upgrades' me into it. Stability over features, ALWAYS.

Disk utility freezing

While trying to check two Macs, a G4 dual 500 and a G5 dualcore 2.3, with installation disk os 10.4.3, the attempts were unsuccessful because the process froze when disk utility opens. I had to shut down the computers with the main switch. I tried two different installation disks of 10.4.3 on both computers and had freezes every time at the same point, when disk utility opens. The G5 had already been upgraded to 10.4.5. Why doesn't Apple supply a trouble shooting text as they did with previous systems?

First things first, is your data backed up? If not, that's the first thing I'd do:
http://www.macmaps.com/backup.html
Next, disconnect all third party peripherals, and only use disks which are designed to help out your Mac in question:
For the G4/500, a retail 10.4 installer disk (black with white and gray X logo) would work.
For the G5 dual-core, use the G5 dual-core installation disks.
Using the wrong installer disk may not always work, especially because of:
http://www.macmaps.com/upgradefaq.html#SYSTEMSPECIFIC
If you are using the right installer disk to open Disk Utility with, and Disk Utility freezes when opened from the Utilities menu, then it suggests a hardware problem on machines where Disk Utility won't open.
Disclaimer: Reference to links I make to my Macmaps.com website are a for your information only type reference. I do not get any profit from this page, and it is open to the public.

I burned an exercise DVD using disk utility and when I played it in my DVD player it was choppy and skipped. Any suggestions are greatly appreciated.

I burned an exercise DVD using disk utility and when I played it in my DVD player it was choppy and skipped. Any suggestions are greatly appreciated.

Commercial
Roxio Toast
<http://www.roxio.com/enu/products/toast/titanium/>
NTI DragonBurn
<http://www.ntidragonburn.com/en/us/product/dragon_burn.asp?>
Shareware or freeware
DVD Image Utility
<http://geek.thinkunique.org/2007/07/17/dvd-image-utility/>
Disco
<http://discoapp.com/>
no longer supported, but free, simple, and runs well under SL.
LiquidCD
<http://www.maconnect.ch/>
free; iffy support, but, again, simple, and runs well under SL.
Burn
<http://burn-osx.sourceforge.net/Pages/English/home.html>
open source; not clear how active development and support are, but runs well under SL.
Terminal Whiz Kid
mkisofs
<http://cdrecord.berlios.de/private/cdrecord.html>
(part of the cdrtools kit)
Use mkisofs to create the disc image, and burn it with hdiutil or drutil. (Some of the free options mentioned above actually use mkisofs.)

Windows 8 freezing when using Firefox

When I'm using Firefox or Chrome browsers the whole entire PC is freezing.
Already posted my issue on the Microsoft Community forum, where you can read the details and the troubleshooting steps I tried:
http://answers.microsoft.com/en-us/windows/forum/windows_8-networking/windows-8-freezing-when-using-chrome-or-firefox/d6bad301-6c55-4469-96cb-0ec3d43e1113
Also I found another post here on the Mozilla forum, who had the same issue and he did not seem to solve it either: https://support.mozilla.org/en-US/questions/975278?esab=a&as=aaq
Please help me to fix this annoying issue! Thx!

Well, the MS site was a bust, wasn't it?
it would help to know how Firefox is configured.
Can you send me your troubleshooting information from the Firefox installation that's having issues? This is a good part in troubleshooting.
*Navigate to <code>about:support</code> via Address Bar
*Click the button that says <code>Copy text to clipboard</code>
*Now, go back to your forum post and click inside the reply box. Press Ctrl+V to paste all the information you copied into the forum post.
Firefox has hardware acceleration set to "on" by default, but it's still young, which means some video cards or drivers might have problems with it. You can try to disable hardware acceleration to see if that alleviates your problems.
You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
Then perform these steps for Firefox version 29.0 and above:
*Click the menu button [[Image:New Fx Menu]] and select Options for Windows or Preferences on Mac or Linux. For Firefox 28.0 and previous versions, click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
*In the Firefox options window, click the ''Advanced'' tab, then select "General".
*In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
*Now, restart Firefox and see if the problems persist.
Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
* [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
* [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
Note that if this issue happens in both Chrome and Firefox that it may be a system issue and not a Firefox related issue,
Do a malware check with some malware scanning programs on the Windows computer. 
Please scan with all programs because each program detects different malware. 
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware: http://www.malwarebytes.org/mbam.php
*AdwCleaner: http://www.bleepingcomputer.com/download/adwcleaner/ http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware: http://www.superantispyware.com/
*Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: Home Page: http://www.microsoft.com/windows/products/winfamily/defender/default.mspx
*Spybot Search & Destroy: http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan: http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller: http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

IMac 10.6.2 freeze when using iSight

Hello
i have Problems - after i upgrade to 10.6.0 from 10.5... everything was ok .
Then i installed 10.6.1 - still not big problems sometimes hang up - only power off helped .
Since i use 10.6.2 - System freeze when using iSight , ini Chat or Skype after 20 sec.
I tried to go back to 10.6.1 - freeze after 20min .
With 10.6.0 so far no freeze .
I need help .

TnT Sweden wrote:
Hello , once again
i tried these steps with reset , .... did not work .
Also in another account .
So i think i will try to make a clean Installation .
As i am "new" into Mac - what will be the best way .
I had Leopard from the beginning - now bought Snow Leopard .I have Time Capsule for Backup.
My questions - with what System CD i should start to make the clean install ?
10.5 or 10.6 ?
And How ?
What Data will be lost - or is all backup with Time Machine like Photos ,......
Thanks in advance -
If you follow your plan, you will learn a lot and not be nearly so "new" to Mac. Here are my responses to your latest questions/statements:
So i think i will try to make a clean Installation .
In our jargon, a "clean" install means that you will erase your disk and individually reinstall your system and applications, and then restore your data files. This method is very thorough and will give you a pristine system, but it requires considerably more of your time and effort than other methods that may correct your problems.
Easier alternatives are available for your consideration. Before you undertake a system reinstall, read the rest of this post and then study this document and the links in the document that are applicable to your problem and plans:
http://support.apple.com/kb/TS1388
If you decide to reinstall your system, carefully consider your installation options:
http://support.apple.com/kb/HT1545 (also applies to OS 10.6)
As i am "new" into Mac - what will be the best way .
"Best" can mean different things to different people. For example:
• The method explained in the User Guide (manual) that came with your Mac is the easiest way.
• The "Erase and Install" option from http://support.apple.com/kb/HT1545 is quicker to reinstall, but requires more work for apps and data after the OS is installed.
• Archive and Install with the "Preserve user and network settings" option eliminates the need for reinstalling apps and reconfiguring network and other user settings by "preserving" these things during the OS reinstall. Unfortunately, it sometimes also preserves the problem that is causing your difficulty.
• Secure erase before installing OS assures that NOTHING unwanted remains on your disk to cause problems after the reinstall. One pass of writing Zeros is sufficient for your purpose. Note that secure erase will take hours, depending on the size of your disk. The help article below applies to your 10.5&6 as well as the 10.4 it states,:
http://docs.info.apple.com/article.html?path=DiskUtility/10.5/en/duh1011.html
Perhaps easiest of all (as least for Time Machine users) is to use your Mac's Leopard Install DVD and your Time Machine backup to "Restore" your system to a configuration dated BEFORE you did the update that has caused your problems. This method will get you working quickly, but it will not help you use Snow Leopard. If you have not already figured out how to do this "Restore," see:
http://support.apple.com/kb/HT1553
The section entitled " Using Disk Utility" will help you use your Time Machine backup to take your entire system back to when Leopard was working. After it works again, either stay with Leopard, or uninstall or update whatever software is causing your Snow Leopard conflict before again updating to Snow Leopard.
My questions - with what System CD i should start to make the clean install ? 10.5 or 10.6 ?
Use Leopard Install CD if you want to backup to Leopard.
Only use Snow Leopard if you want to try a fresh install of SL to see if you can get it working.
And How ?
Depending on your needs and whether you bought your Mac and SL update locally, and especially if your time is valuable to you, the best way may be to contact your retailer for an appointment so he can either help you or fix your problem for you. If you can use this as a training exercise, you will find it easier to do than to read and write about, and you can ask questions during the process. If you retailer does not consider proper installation of the SL software you bought from him to be part of his service, and if he offers "One to One", you may find it well worth your time and its cost:
http://www.apple.com/retail/onetoone/
If you have plenty of time, or if you merely like doing things for yourself, follow the instructions for the Disk you are using (or the instructions in the links I cite above if you want to try one of those methods.) Remember, you can try an easy/quick way first in case it works without all the manual effort on your part. If that fails to correct your problem, you are only out your time. You can try the next easiest way, and keep trying increasingly complex methods until you find the one that works for you.
What Data will be lost - or is all backup with Time Machine like Photos ,......
This answer varies depending on which method you use to restore your system or reinstall your OS:
• NOTHING IS LOST when you Archive & Install
(if you "preserve user and network settings" before installing)
• EVERYTHING IS LOST when you secure erase.
• Other methods may keep data but lose application or user configuration settings.
(1) I use SL on two Macs and it work GREAT on both. I WANT to use SL because I like it MUCH better than Leopard.&ensp:You did not ask this, but here is how I would proceed to get SL working:
♦ Unless you already have it, I would make another, separate, backup of all important data in addition to the one you already have in Time Machine. One backup is not enough for me. In addition to your music, photos, and other data files, consider items like those listed here:
http://support.apple.com/kb/HT2980
♦ THEN, I would securely erase the startup disk and follow the instructions that came with the SL DVD to install SL.
♦ Immediately after the restart that completes the install, I would use Mac's Disk Utility to repair permissions.
♦ Then configure your internet connection, and download and install the Mac OS X v10.6.2 Update (Combo):
http://support.apple.com/kb/DL959
♦ Immediately after the restart that completes the Combo Update, repair permissions again.
♦ Once you have reinstalled SL, use  > Software Update... to update any other Apple software as needed. I repair permissions before and after any installer than asks me to enter my Administrator Password.
♦ Now you can test your iMac using http://support.apple.com/kb/HT2090 to verify that the problem is resolved. If your problem persists at this point, see your Apple Authorized Service Provider for professional help.
♦ You can restore your data files either now or after reinstalling third-party items.
♦ Now, you can reinstall necessary third-party software. Install only one item at a time and test thoroughly before adding another so you can tell if one of them is causing a problem.
(2) If you would rather retreat to Leopard and not bother trying to fix SL on your Mac, the easiest fix will be to restore your Leopard system from Time Machine. You can then restore any data newer than your last working Leopard system from your backups.
EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz w/Mac OS X (10.6.2) MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.2)
LED Cinema Display G4 PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight

Disk Utility Freezes...

Along with other standard Mac apps, like calculator.... I am getting so annoyed with my Powerbook G4 (running OS X Panther)...
I recently had a problem with what I believe started because of a faulty downloaded font which ended up in me having to re-install OS X using the Back-Up and Restore feature on the Software Install Disc.
After getting my laptop up and running again, I have begun to notice more things acting funny, like my Disc Utility Freezes when I try to select my hard drive from the menu, and the calculator app freezes whenever I try hitting the '=' button, so no more basic math for me, lol........
But seriously, this isn't funny at all, I use my Powerbook for my main (work) computer and I am going to be SOL if this thing goes out on me.... is there anything I can do?
Thanks for any help you can provide.
PowerBook G4 Mac OS X (10.3.9) 1.25 GHZ / 512 MB DDR SDRAM

Hi there,
I had that message 2weeks ago from my copy of Techtool Pro 4 on my Laptop, it was setup to check my HD every time I login.
The message I got was: "Macintosh HD Allocation Overlap (-694)"
I'm not much of a coder but I assumed it was a directory error or something of the like.
I ran a repair, but it was unable rectify the problem
So I backed-up all my data to a Firewire HD & did a Clean Install from my Retail copy of Panther - worked a treat, though it may have been using a Sledgehammer to crack a Walnut, & yes it took awhile but was the only way I knew how to sort it once-&-for-all (others may know different?).
If you do this, take time to download the Combo update rather than putting update on-top of update etc. - works out a faster update process in the end.
Also these updates you installed, do you repair Disk Permissions (if it'll let you) before & after each update? As this helps your system stay good.
Be careful of iTunes 7.x.x updates - as there are many users posting how it trashed their Macs!
iTunes 7.x.x wouldn't run on my G5 - I had to reinstall iTunes 6.0.5 to get my music back!
Hope that helps.
Rory

The numeral part of my keyboard causes my mac mini to freeze when using the 0 - 9 keys

The numeral part of my keyboard causes my mac mini to freeze when using the 0 - 9 keys.. I have to restart to continue.
Does it have to do with the disk utility?
I already did the disc repair job

Open System Preferences - Universal Access and check whether 'Mouse Keys' are activated.
If so, then deactivate them. They could be the cause of your problem.
Stefan

Crash or freeze when using Spot Removal

I am having problem with my lightroom 4.2, when I try to use the clone tool my computer crash or keep not responding can anyone help to understand what may be happening ?
Message title was edited by: Brett N

yes it is Windows 7
Date: Sat, 27 Oct 2012 14:46:54 -0600
From: [email protected]
To: [email protected]
Subject: Crash or freeze when using Spot Removal
    Re: Crash or freeze when using Spot Removal
    created by Geoff the kiwi in Photoshop Lightroom - View the full discussion
Is that Windows 7.You can look in the Help Menu in the Menu bar for Lightroom and under System Info you will find what is being asked for.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4805402#4805402
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4805402#4805402
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4805402#4805402. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Photoshop Lightroom by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Imac keeps freezing when using safari

my imac keeps freezing when using safari or finder
The beachball appears and I have to wait.
My safari cache is emptied, have run Disk Utility to check permissions.
Rebooted various times.
Sorted out ``the community toolbar not supported" issue and still it's happening.
Anyone any tips on what to do next??
It's a 24 inch iMac - early 2009 version
Processor is 3.06 Ghz Intel Core 2 Duo
Memory 4GB 1067 MHz DDR3
Software is OS X 10.8.2 (12C60)

I have only been able to read your reply by going online on my phone -
I started up my iMac in safe mode on Saturday morning and reran Disk Utility , no problems.
I shut it down and re started it as normal. Whilst I was able to use my Mail and MS entourage and Safari brower,
the computer was very slow and the beachball appeared briefly each time I used a program.
On Monday , it didn't recognise one of the printers and was continually hanging.
All software is up to date and I have run Disk Utility - repair permissions again.
I shut the computer down yesterday and rebooted in Safe mode this afternoon so that I could try to look in
Console.
There are 4001 messages (11-02 to 13-02)
I have only included some of the most recent
13/02/2013 15:59:33.000 kernel[0]: disk0s2: I/O error.
13/02/2013 15:59:33.350 AddressBookSync[296]: [0x7feff941fd50] |ISDException|Error| *** SyncServices Exception
Type : ISyncDataDirectoryCorruptedException
Reason : Detected database corruption: 5 (Input/output error)
Filesystem Reason : Input/output error
Database Path : */Library/Application Support/SyncServices/Local/clientdata/633a1ba25cb8241bbde44acb603ee1e822cde772/ data.syncdb
Database Access Mode : Read Write
Open SQLite Files :
 */Library/Application Support/SyncServices/Local/clientdata/633a1ba25cb8241bbde44acb603ee1e822cde772/ recordids.synciddb
 */Library/Application Support/SyncServices/Local/clientdata/633a1ba25cb8241bbde44acb603ee1e822cde772/ constructedids.synciddb
 */Library/Application Support/SyncServices/Local/clientdata/633a1ba25cb8241bbde44acb603ee1e822cde772/ data.syncdb
Stack Trace :
0 SyncServices 0x000000010343222c _ISDSQLiteBlowOut + 1107
1 SyncServices 0x0000000103431dc5 _ISDSQliteFullIOErrCorruptionHandler + 821
2 SyncServices 0x0000000103399dcc -[ISDDatabase(SqliteHelpers) stepStatement:] + 238
3 SyncServices 0x00000001033a1cb0 -[ISDDatabase(SqliteHelpers) runStatement:withBoundObjects:startingAtIndex:callback:context:] + 376
4 SyncServices 0x00000001033a23fe -[ISDDataDatabase updateRelationshipsForRecordsInDictionary:withRecordIds:stringTable:constructRe lationshipMap:] + 182
5 SyncServices 0x000000010339f95c -[ISDDataDatabase createDictionaryAndArray:withRecordsWithIdentifiers:constructRelationshipMap:] + 334
6 SyncServices 0x000000010339f6b3 -[ISDRecordStore createDictionaryWithRecordsWithIdentifiers:constructRelationshipMap:] + 69
7 SyncServices 0x00000001033c6dbf -[ISyncConcreteSession _newDictionaryWithRecordsPushedByClient] + 249
8 SyncServices 0x00000001033c6815 -[ISyncConcreteSession _processModifiedRecords] + 161
9 SyncServices 0x00000001033c6515 -[ISyncConcreteSession _processPushedStuff] + 488
10 SyncServices 0x00000001033c5f28 -[ISyncConcreteSession _leavePushing] + 80
11 SyncServices 0x00000001033c2380 -[ISyncConcreteSession _transitionStateMachine:] + 339
12 SyncServices 0x00000001033c37f7 -[ISyncConcreteSession _prepareToPullChangesForEntityNames:inBackground:target:selector:] + 232
13 SyncServices 0x00000001033c36c9 -[ISyncConcreteSession prepareToPullChangesForEntityNames:beforeDate:] + 37
14 AddressBookSync 0x00000001015b2d6d AddressBookSync + 23917
15 AddressBookSync 0x00000001015b1fea AddressBookSync + 20458
16 AddressBookSync 0x00000001015b1ab5 AddressBookSync + 19125
17 AddressBookSync 0x00000001015b9454 AddressBookSync + 50260
18 libdyld.dylib 0x00000001048157e1 start + 0
13/02/2013 15:59:33.353 WindowServer[113]: reenable_update_for_connection: UI updates were finally reenabled by application "Microsoft Entourage" after 104.98 seconds (server forcibly re-enabled them after 1.00 seconds)
13/02/2013 15:59:33.420 AddressBookSync[296]: [0x7feff941fd50] |ISDException|Error| *** SyncServices Exception
Type : ISDSQLiteStatementExecutionException
Reason : error executing 'rollback transaction;': 1 (cannot rollback - no transaction is active)
Filesystem Reason : Input/output error
Database Path : */Library/Application Support/SyncServices/Local/clientdata/633a1ba25cb8241bbde44acb603ee1e822cde772/ data.syncdb
Database Access Mode : Read Write
Open SQLite Files :
 */Library/Application Support/SyncServices/Local/clientdata/633a1ba25cb8241bbde44acb603ee1e822cde772/ recordids.synciddb
 */Library/Application Support/SyncServices/Local/clientdata/633a1ba25cb8241bbde44acb603ee1e822cde772/ constructedids.synciddb
 */Library/Application Support/SyncServices/Local/clientdata/633a1ba25cb8241bbde44acb603ee1e822cde772/ data.syncdb
Stack Trace :
0 SyncServices 0x000000010343222c _ISDSQLiteBlowOut + 1107
1 SyncServices 0x0000000103394818 sqliteExecuteWithCallbackAndOptions + 660
2 SyncServices 0x0000000103394559 -[ISDDatabase(SqliteHelpers) execute:] + 207
3 SyncServices 0x0000000103440451 -[ISDRecordStore rollbackChanges] + 57
4 SyncServices 0x00000001033c5f0f -[ISyncConcreteSession _leavePushing] + 55
5 SyncServices 0x00000001033c2380 -[ISyncConcreteSession _transitionStateMachine:] + 339
6 SyncServices 0x00000001033c6680 -[ISyncConcreteSession _processPushedStuff] + 851
7 SyncServices 0x00000001033c5f28 -[ISyncConcreteSession _leavePushing] + 80
8 SyncServices 0x00000001033c2380 -[ISyncConcreteSession _transitionStateMachine:] + 339
9 SyncServices 0x00000001033c37f7 -[ISyncConcreteSession _prepareToPullChangesForEntityNames:inBackground:target:selector:] + 232
10 SyncServices 0x00000001033c36c9 -[ISyncConcreteSession prepareToPullChangesForEntityNames:beforeDate:] + 37
11 AddressBookSync 0x00000001015b2d6d AddressBookSync + 23917
12 AddressBookSync 0x00000001015b1fea AddressBookSync + 20458
13 AddressBookSync 0x00000001015b1ab5 AddressBookSync + 19125
14 AddressBookSync 0x00000001015b9454 AddressBookSync + 50260
15 libdyld.dylib 0x00000001048157e1 start + 0
13/02/2013 15:59:33.730 Microsoft Sync Services[293]: Warning: NSBundle NSBundle </Users/name/Library/Sync Services/Schemas/MicrosoftOfficeNotes.syncschema> (not yet loaded) was released too many times. For compatibility, it will not be deallocated, but this may change in the future. Set a breakpoint on __NSBundleOverreleased() to debug
13/02/2013 16:00:04.327 mds[35]: (Error) Server: Disabled store registered for scope "/Library/Application Support/Apple/Fonts"
13/02/2013 16:03:25.062 WebProcess[306]: CoreAnimation: failed to create OpenGL context
13/02/2013 16:08:21.427 WebProcess[306]: CoreAnimation: unhandled combiner function: 11
13/02/2013 16:18:13.087 WindowServer[113]: Resampling logo assets. This should be considered a bug. (height = 21)
13/02/2013 16:19:26.633 com.apple.backupd[329]: Starting automatic backup
13/02/2013 16:19:27.269 com.apple.backupd[329]: Attempting to mount network destination URL: afp://name;[email protected]/Data
13/02/2013 16:19:27.797 com.apple.kextd[11]: Can't load /System/Library/Filesystems/AppleShare/afpfs.kext - dependencies not elibible during safe boot.
13/02/2013 16:19:27.807 com.apple.backupd[329]: NAConnectToServerSync failed with error: 22 for url: afp://name;[email protected]/Data
13/02/2013 16:19:28.030 com.apple.backupd[329]: Backup failed with error: 19
13/02/2013 16:21:16.867 universalaccessd[335]: CGSGetZoomParameters: Invalid connection
13/02/2013 16:21:16.867 universalaccessd[335]: CGSSetZoomParameters: Invalid connection
13/02/2013 16:21:16.867 universalaccessd[335]: CGSSetZoomParameters: Invalid connection
13/02/2013 16:21:43.190 Finder[184]: *** WARNING: -[NSImage compositeToPoint:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
13/02/2013 16:21:43.191 Finder[184]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
13/02/2013 16:25:39.096 universalaccessd[339]: CGSGetZoomParameters: Invalid connection
13/02/2013 16:25:39.096 universalaccessd[339]: CGSSetZoomParameters: Invalid connection
13/02/2013 16:25:39.096 universalaccessd[339]: CGSSetZoomParameters: Invalid connection
Hope this gives some info so that the problem can be resolved and I can use my computer without further issuses.

Disk Utility Freezes & MS Word & Excel Won't Launch

Yesterday, my Disk Utility froze when it started performing a Verify Disk and I had to force quit. This morning I was using both MS Excel and MS Word, closed them and when I tried to open them 30 minutes later, neither will launch and I get an error message saying that they "closed unexpectedly during launch." I tried to Verify Disk & Disk Utility froze again. Then I repaired permissions using Disk Utility but it didn't help with the Excel and Word issues. I have never had a problem with any of these before. I just used Disk Warrior to "Check All Files and Folders" and "Repair Disk Permissions" and Test the Hardware. I am still not able to open Word or Excel. Any thoughts??

Hard drive has 30.58 GB available. I didn't run disk utility from the OSX install disk -- am in the process of moving and not sure where it is. Might actually be in my home in another country!!!

Disk Utility Freeze when using New Image

Similar Messages

Maybe you are looking for