Disk Utility not finding new internal hard drive

Hi All
My internal hard drive died recently and I replaced with a western digital drive from newegg..
All the cables are hooked up correctly, including the orange cable attached to the hard drive. Problem is that when I go to install OS X, Disk Utility doesn't even list the drive. Is there something I need to do beforehand? Anyone have any ideas as to why Disk Utility isn't even seeing the drive? Jumpers maybe?
Thanks in advance.
-Aaron

I doubt that any jumpers are needed, since this is the only (master) drive in the system. WD's site has pretty good info on this. Verify for yourself however.
Also, from their site:
How to partition and format an internal slave drive or an external drive in a Mac OS X (all versions).
Answer
In Mac OS X, you can use the built in Disk Utility to partition and initialize the drive so it will appear on the desktop.
1. Open the main drive (the drive that contains the operating system).
2. Open the Applications folder.
3. Open the Utilities folder.
4. Select Disk Utility.
5. The drives are displayed on the left side of the window. Click on the drive that you wish to partition (the top drive listing for the hard drive that you want to work with).
6. Once the drive is selected click on Partition.
7. Click on the Options button to select the partitioning scheme.
8. Click on Apple Partitioning Scheme or Apple Partitioning Map and then click on the OK button.
9. You will see several options for setting up the drive. Once you have selected the number of partitions, the format type you want, and a volume label, click the Partition button.
10. Following the completion of this process, the drive will appear on the desktop.
Joe

Similar Messages

  • Disk Utility not formatting new internal hard drive

    My 2011 mac book pro recently crashed giving me a gray screen with a folder(question mark). I tried reinstalling Yosemite, with no success. I bought a 2tb seagate hard drive, placed it into my macbook, however it's in master boot record. I tried partitioning it under GUID, but it is giving me error signs, as well  "waiting for disks to reappear". I am currently erasing the hard drive, I understand that a 2tb hard drive is a huge hard drive and it takes time for it to be reformatted, but it's been over 12 hours and the estimate time remaining just continues to increase. What is happening? What am I doing wrong?

    Just returned it, got the new one and same thing happened...I'm pretty confused with this right now. I used it as an external hard drive and it formatted fine. I installed Yosemite on it and ran fine as the operating system as an External Hard drive. However, as soon as I switch i put it into my laptop, it does not pick up or read. I just formatted the hard drive again and trying to install it, but now it is giving me a different error "this disk cannot be used to startup your computer yosemite". It's actually running as my internal hard drive right now and that's is what my computer is giving me.

  • My MacBook Pro can not find my internal hard drive.

    My computer does come on. And I have a MacBook Air 2009. Just some history, my computer froze on me one day. So I restart it and a screen with a folder and question mark showed up. So I called apple and got some trouble shooting done. Nothing worked. So they ended up sending me another installer disk. And that did not work. Could not find my internal hard drive. So I took it to a apple store and the guy who looked at it told me that it was water damaged and would cost $700 to fix. So I pushed it to the side for year and decided to take a further look into it recently. And found some information where people had the same issue and was advices their hard drive could be dead. So I'm thinking about getting a 2nd opinion and taking it some where else. I'm just wondering could I really just replace my hard drive and be fine with my computer? If its really water damaged wouldn't it not work? Does replacing the hard drive cost a lot to do?

    Its extremely unlikely your HD is water damaged, everything on your internals in your macbook Pro would FRY long before water seeped its way into your HD,....the HD circuitry on the outside of the HD however is another story.
    If your computer IS in fact water damaged, then yes, replacing the hard drive wouldnt fix anything.
    Replacing the HD yourself , IF your HD is dead and at fault, can be done by yourself easily and cost around $65.
    In any regard, on a 2009 computer....., 700$ could buy you a nice MUCH NEWER and faster like new refurbished MAC,........as such it would be best not to consider such an option.

  • Can I reformat and partition a new internal hard drive with the Snow Leopard disk?

    I'm planning on installing a new internal hard drive in my 15'' Macbook Pro. Can I format and partition the new drive with the Snow Leopard disk or is it just an upgrade from Leopard? Thanks much.

    You should be able to do that.
    If you want to change the sizes of existing partitions this may help:
    Enlarging a partition

  • Installing Leopard and new internal hard drive at same time, best plan?

    Ok so basically the title explains what I need to do. I am currently travelling in Europe, and returning home to New York on Tuesday night. I have a new hitachi 250gb HD and will have Leopard waiting for me at home when I arrive, and will get right to doing this installation. I am writing on the discussion boards here because I am hoping the users here can give me their opinions on what is the best plan of action to do this whole install?
    So what I was thinking was, I should remove the hard drive that's already inside, put it into an external enclosure. Then, put my new blank 250gb hard drive into the macbook pro, close up the computer, then put the Leopard OSX install disk, and do a completely fresh install of Leopard. Then, after installing (or during installing?) I should run the migration assistant program to get all my files and settings etc. transferred over to the new internal hard drive with Leopard on it, from the old hard drive that will be plugged in from an enclosure as an external drive.
    Will this plan have any problems that I am not aware of? Is there a better process for doing this task? Any advice will be greatly appreciated! I am anxious to get my new hard drive into the computer because my 160gb is filling up, and dying so badly to use the new Leopard!!

    You could also put the new disk in the external enclosure, partition it using disk utility. Then make a clone of your current hard disk to the new external one using the restore feature in disk utility. Boot from the external disk and Install Leopard as an upgrade keeping all your files and setting. check everything is all running how I should and swap drives over. That's another option for you.

  • New internal hard drives, seems slow with Logic 8, how can i test

    Hi,
    I just bought a new internal hard drive, but it seems subtley too slow!,
    On a Logic 8 song i'm working on the tracks timing seems slightly off, it's kind of driving me crazy because at times it is subtle, and other times obvious.
    and 2 other things, one is an iTunes playback stalled twice, and that's never happened before,
    also, when working on a Word doc, the screen was not re-drawing properly. i had to repeatedly reisze the doc window to get it re-draw itself. this has never happened before either.
    is there a way to test this new hard drive?,
    thanks

    There are though all the ones I've used, TechTool Pro, Disk Utility, Intech Speedtools, none were 'perfect' or as good as the vendor's own utility which runs on Windows.
    But you might do something for us - include the drive make/model version, and, do a look up with Google and see if you get any helpful hits.
    How you have your system setup, number of drives and organization of files, can also have an impact.
    Off hand, WD Caviar 640GB is cheap and fast, or there are some 1TB drives that look good, too.
    Drives do break in over a period of days or first week, and it can help to break in and torture, zero the entire drive, run media scan, use a benchmark utility to graph I/O over the full drive.
    Check out Barefeats, they do a bit of drive testing benchnmarks and see what they use and results. Or Tom's Hardware.

  • How do I reboot my Macbook pro 2011 to a new internal hard drive?

    I had to get a new internal hard drive and I can't afford to pay some one to do it for me. So I was wondering how do I install the operating system on to the hard drive?
    Thanks

    Since we don't know which MBP you have or what OS was initially installed on it, try this. Start up the Mac and hold down the Command and "R" keys. If you have an internet connection and if the MBP came with Lion installed, you should be able to boot into Internet Recovery. From there, you can download Lion from Apple's servers and install it. That's assuming the new HD has already been installed and formatted (you can format it yourself using the Disk Utility that's available in Internet Recovery).

  • Need to buy new internal hard drive ~ suggestions of where to buy online?

    My 3 year old Mac Mini needs a new internal hard drive. I'm trying to find one online, but when I go to macsales.com for instance, I can't figure out the item I should be buying that will work. I'm clueless.
    Is there any online place anyone would suggest in particular?
    And what do I look for? Will it say 'mac mini internal hard drive' and will I know it will work in my old mini? (not intel).
    Does anyone know of a good place to take to have it installed in the Seattle area?
    Help! Thanks!

    With a little experience, replacing the drive on a Mac mini would take a little less than an hour, so I suspect you're being quoted the standard minimum for the job by those two sources. Whether you take that up or do it yourself really depends on your level of confidence. Opening the mini is a daunting proposition since there's no clear way to do it, and the plastic creaks and clicks as it's being levered apart with the putty knives, but it's actually very simple to do. Once the top is off, it is a fairly simply process to get to the drive, remove it, fit a new one and then reassemble. The only common issue from doing this work is failing to reconnect the fan control cable (symptom of having forgotten it is that the fan runs continuously on start up).
    I would suggest that if you have a flat, clear table, an hour to spare, two putty knives and a suitable screwdriver, you would likely find it a fairly easy job once you get started. Indeed, you might even think about increasing the system memory at the same time!
    One thing I would suggest is that if you have a digital camera, once you have the top open, start taking pictures as you progress through the job. That will help overcome the 'where does this go?' syndrome, should it strike!
    In terms of sources of drive, the reason Boece suggested OWC in the first reply is that they have already done the work of figuring out which drives are compatible and which are not. If you are in any doubt about which drive will work and which won't, it would make sense to source the drive from them, knowing it is suitable, than through another vendor where you may be less sure!

  • How do I backup to time machine with a new internal hard drive?

    My Macbook Pro's hard drive got corrupted about a year ago so I had to get the hard drive completely replaced. However, I wanted to start backing up my data to time machine so if the same situation were to reoccur, I would be better prepared. For some reason Time Machine does not recognize the new internal hard drive of the computer as it is supposed to. Could someone please help? thank you in advanced
    Current OS: OS X 10.8.4

    That error message is saying that it is attempting to setup a Time Capsule for Time Machine to backup your data on.
    Do you have a Time Capsule?
    Do you have an external Disk Drive?
    You can do a backup to the internal disk drive. It is worthless to do that.
    Allan

  • HT4718 I want to install a new internal hard drive for my Macbook (13in, Late 2009) and restore to factory settings. However, I want to keep my Mac OS X Snow Leopard.

    I want to install a new internal hard drive for my Macbook (13in, Late 2009) and restore to factory settings.  However, I want to keep my Mac OS X Snow Leopard., which I downloaded from the app store. How can I restore computer with the updated OS?

    What I did on our two computers was partition the hard drive so that both Snow Leopard and Mountain Lion can be used on the computers. This allowed me to be able to retain/use older applications and games on the Snow Leopard partition. This will allow you to do a clean install of Mountain Lion on the newly created partition. The Mountain Lion installer has a button that allows you to select another drive so you don't install it over Snow Leopard. I cleverly name one partition Snow Leopard and the other one Mountain Lion so I wouldn't confuse the two (I never claimed to be smart).
    To partition, you need to have sufficient free hard drive space (I suggest 50 GB minimum). Boot off the Snow Leopard DVD or the disks that came with the computer and use Disk Utility to partition your hard drive into two partitions. If you plan to make Mountain Lion your primary OS, then you can reduce the size of the Snow Leopard partition so most of the free hard drive space is available for Mountain Lion. While booted off the disk, you can install Snow Leopard on the partition you want it on.
    Restart and download Mountain Lion, remembering to select the correct partition before installing. I would make a copy of the installer and move it out of the Applications folder because the installer self destructs.
    After getting all that sorted out, I found that while booted in Mountain Lion I could access the Snow Leopard partition. That allowed me to drag files and applications from Snow Leopard to Mountain Lion. Applications that won't work with Mountain Lion will be grayed out with a slash through them.

  • How do I transfer all data from my old internal hard drive to a new internal hard drive

    How do I transfer all data from my old internal hard drive to a new internal hard drive? I have an iMac with a 320gb internal HD that is full and I am replacing it with a 2tb internal drive. I have several external drives; 1 tb, 2tb and 3 tb. The 2 tb is being used for Time Machine. Do I have to buy an enclosure? If so, where would I get an inexpensive one?
    I also want to partition the new internal drive for Windows, and I'm not sure how much space to use for that. I plan to use Windows to check my work in PowerPoint created on my Mac for clients on PCs.

    Do you already have Time Machine making backups onto the 2TB drive? If so, after you get the internal drive replaced, boot up into the recovery partition (hold down ⌘R) and restore the latest Time Machine backup that you have onto the new internal drive.
    I recommend always having two backups. I'd use SuperDuper to make a complete clone of your internal drive onto an external drive in addition to having the Time Machine backup.
    Boot Camp is what is used to make partitions for Windows. How much space to allocate depends on how much space you expect Windows to use up based on how you plan to use it.

  • Time machine can not select my internal hard drive any more.

    Hi all
    Time machine can not select my internal hard drive any more. I only can back up external disks. Does anyone know how to fix this?
    All answers are much appreciated

    I don't know the answer but I have the same thing happen. I have two external drives I use for backup. Sometimes it can see one and sometimes another. Then sometimes it can't see either one.  I will take one out for a while then plug it back in and then it may see it.  Maybe it's a cable issue or something but I will be curious to hear what someone more knowledgeable says. 

  • Best way to transfer data to new internal hard drive

    Hi,
    I just got a new internal hard drive for my macbook and I'm trying to figure out the best way to transfer all the data from my old hd to the new one. Basically, I would just like to make an exact copy of my old hd and put it on the new larger one. Thanks for the help.

    Will I simply be able to do a firewire transfer on the new internal HD is installed
    Yes. Use Carbon Copy Cloner with the sopurce and destination volumes reversed after installing the new drive.
    Additionally do I need a bootable copy of OSX on my external HD to do the transfer?
    Yes; the clone can act as this copy. If you copy everything with Carbon Copy Cloner, you will be told whether the drive will be bootable or not prior to the clone.
    (33676)

  • Questioning about Partitioning a new Internal Hard Drive

    I just bought a new Internal Hard Drive, Western Digital Caviar, 500 GB. I am trying to Partition the Drive but, there is a pull down menu which I am not sure what to select.
    On "Volume Scheme, I selected 1 Partition from the menu, BUT, what do I select on "Format"?
    It gives me these options:
    1. Mac OS Extended (journaled)
    2. Mac OS Extended
    3. Mac OS Extended (case sensitive, Journaled)
    4. Mac OS Extended (case sensitive)
    5. Mac OS Extended
    Free-Space
    I am not sure what to choose here, IF I have to chose anything. All I need is another HD where I will have music samples on it.
    Any help would be appreciate it.

    For normal purposes, use Mac OS Extended (journaled)

  • Can I use Disk Utility to erase Apple TV hard drive?

    Can I use Disk Utility to erase Apple TV hard drive?

    I don't know, but I doubt it can be done using Disk Utility. I suggest you consult the user manual for it or see if there is a Reset option in the onscreen menues. If you don't have a manual, then you will find one at http://support.apple.com/manuals.

Maybe you are looking for