Disk utility not showing!!!

i've tried to open my disk utility from finder>about this mac and more info is greyed out then i tried to use spotlight to find it but it doesn't work too..
i trashed the utility folder in my applications (there was nothing in it) a few days ago and i'm wondering if thats the cause for all this?
can anyone help??
is there anyway i can recover the folder?

haha.. ok.. if anyone is gonna be as silly as me, here's what to do.
1. insert the cd that came with your mac (mine's on disk 1)
2. open the folder and drag the Utilities folder into ur Applications
3. its done.
dang, so simple..
thanks all for helping though i figured it by myself at last =/
wont try this again =p

Similar Messages

Snow Leopard Disk Utility not showing Disk

Heya, before anyone jumps to conclusion that the disk is just dead, please read the following info.
Background: Basically I'm upgrading to Snow Leopard and I had a striped RAID that I wanted to break and format. They held my Leopard install and I know there's issues w/ SL install seeing RAID (even doing disk boot didn't work for me) so I went the route of booting from SL disk and I broke the soft RAID.
_The problem:_ After I broke the RAID only one of the two HDs was showing up, the one in Bay 1. So I formatted it to see if for some reason it would do something about it. No dice. I even tried taking out the other disk and putting it in bay 1, but to no avail.
*So here's the weird part*: I booted with the Leopard disk and it saw both drives with no problem. The other one that wasn't showing up still was thinking it was part of it's own RAID but after I Erased it, it looked exactly the same stat wise as my other Seagate. So key point: _nothing wrong with the HD_.
_Other info:_ I went into the System Profiler on each booted OS disk and the Leopard one was showing both drives in the Serial-ATA section just fine, wheres Snow's Profiler said there was some error finding the info. Believe me I tried this several times, back and forth.
So has anyone had and/or fixed a problem like this where Snow Leopard's disk utility is only finding one (a specific one) hard drive that was perhaps previously raided?

Update : So I talked to Apple Support and they suggested installing Leopard on the one drive that is found and seeing if it recognizes the drive afterward. It did in fact find the drive just as I had named it. *The Bad*: obviously I can't create a soft RAID using the boot drive while actually booted up and of course the SL install disk still won't find the drive.
But there's a new development: I did the sleep wake test to make sure I didn't go through all this trouble for nothing (I was having a wake from sleep problem in Leopard) and after successfully waking it gave me a nice error saying how a drive was ejected improperly *and the drive no longer would show up in the finder* and the system profiler threw up another error.
I did the same sleep wake test booted in Windows 7 on my 3rd bay drive and both drives would show up and be usable (or at least readable) so I'm still pretty sure it's not the drive.
It must be something about OS X not wanting to power-up or read my other drive correctly, especially after sleeping?

Disk utility not showing volume

I was having boot issues on a mac mini running OS 10.5 so decided to boot off the DVD and run Disk Utility. When Disk Utility came up it listed the hard drive and the DVD drive but it did not list the volume under the hard drive. This means the volume could not be selected thus all the repair/verify buttons are grayed out. Any next steps? Would rather not have to erase the entire drive.
Thanks,
Jim

James,
I don't know for sure but looking into TestDisk may be of help to your situation. http://www.cgsecurity.org/wiki/TestDisk It claims to be able to restore a bad partition table.
I hope that helps

Disk Utility not showing same disk space as get info on HD

Hi,
My Macbook Pro was really slow and i did Repair Disk and it seems to work much better. the problem is that when i get info on my HD it shows me that there is 200 GB free but when i go to Disk Utility it only shows me that there is 73 GB free???
How can this be?
Please help. thanks

OmniDiskSweeper is a free utility that checks HD space.

Repair permissions with disk utility not showing details

I've recently upgraded from Lion OSX 10.7.5 directly to Mountain Lion OSX 10.8.3.
1. Now, every time I use the Disk Utility to repair permissions, the details of the repair are missing. Not that I really need to see the repairs but the information confirmed that something was done. Now I see only what appears on the attached screen shot at the end of the repair.
When I had OSX 10.7, I always saw which files were repaired.
2. Also, the estimated time for repair is off. Under Mountain Lion OSX 10.8.3, the estimate says a fixed "1 minute" and remains so until finished. I just time the repair at 3.5 minutes and the estimate remained at 1 minute.
Under OSX 10.7 the repair time estimate would begin at 23 minutes or so then quickly work itself down in minutes until the repair was completed.
Can anyone tell me what's going with my iMac (27-inch Mid 2011), Mac OS X (10.8.3).

James --
Over the years, the function or understanding of Repair Permissions has changed drastically. When I first came here in 2004, lots of people thought RP was the "be all, and end all" of all Mac problems. (Myself included.) It was right up there with "take two aspirins, and call me in the morning." kind of response.
In fact, the notations you see are not in fact "errors." They're notations. And if you run them all day, you will almost always see the same ones over and over.
Every once in a while, if you experiences really wonky problems that seem unexplanable, the option to RP makes sense. Especially after a huge major application installation, especially Adobe apps
RP is not like a regular maintenance procedure. So, if you're not expelriencing very significant problems with your Mac, repairing permissions is probably not a good use of your time.

HT4790 My Mac OS Lion 10.7 FileVaulted HD does not boot, prohibitory sign, stop sign appears some minutes after boot starts. Disk Utility repair shows four error messages: Unable to bootstrap transaction group 2517: inconsistent crosscheck (the same with

My Mac OS Lion 10.7 FileVaulted HD does not boot, prohibitory sign, stop sign appears some minutes after boot starts. Disk Utility repair shows four error messages:
Unable to bootstrap transaction group 2517: inconsistent crosscheck
No valid commit checkpoint found
The volume xxxxxxxxxxxxxx(here it shows physical volume number) was found corrupt and can not be repaired.
Problems were encountered during repair of the partition map
Error: Storage system verify or repair failed.
(the same with 2518, 2519 and 2520 transaction group)
I suppose it is serious bug in Mac OS Lion managing FileVault and wonder what the help could be?

Most likely culprit is your Lacie drives which are notorious for flaky power supplies which cause just the sort of erratic behaviour that you describe. Have had similar issues myself. Lacie has been good about replacing my power converter-- twice. If you have seven of them, good luck finding the bad one or more. Like I said, the behaviour is erratic. Sometimes it'll work sometimes not. I can't comment on Samsung drives because I've never used them and have never heard anything about them. Same with Softraid. Why not just use Disk Utility. Sounds like you're ready for an external hardware raid. This will be much faster, much more reliable, and may even be cheaper than seven firewire drives. Check out G Tech, and Maxx Digital for starters.
Best of luck
Terry

Copy to disk utility not working right

My disk utility not work like it used to, it does not show up a disk when I put it in the drive. And I can't copy to disk anymore. A blank disk shows up as a removeable drive instead of a blank disk on the disk utility...??? I need to fix this so I can back-up my files and free up some space, help please?
Dual 1.42 GHz PowerPC G4 Mac OS X (10.3.9) 2MB L3 cache per procesor 1.5 GB DDR SDRAM extra 250G HD

Hi-
The last time I saw a similar problem to yours, he was also running Panther. I advised reinstalling the 10.3.9 combo update, and his woes were gone.
http://www.apple.com/support/downloads/macosxcombinedupdate1039.html
Another thought is to check System Preferences/CD's & DVD'S, and check your selection nuder "When you insert a blank CD" (or DVD).
Running Disk Utility from the install disk, and repairing permissions is also another possible fix.
G4 AGP(450)Sawtooth Mac OS X (10.4.8) 2ghzPPC,1.62gbSDRAM, ATI9800, DVR-109,(IntHD)120&160,LaCie160,23"Cinema Display

OS X Disk Utility not recognizing Seagate 3TB drive in dock

Model Nhjgjhgjhgh
OS X Disk Utility not recognizing Seagate 3TB drive in dock
Been scouring the webs and can't quite figure this one out.
I just purchased a Seagate 3TB drive intending on using it for Backup.
Ended up plugging it into a dock and couldn't get it to show up in Disk Utility..
Interesting enough, I plugged this into an HP laptop and it displays just fine.
Anyone know the solution?
OS X 10.10 Yosemite, MacBook Pro (Retina, 15-inch, Early 2013)
Hardware Overview:
Model Name: MacBook Pro
Model Identifier: MacBookPro10,1
Processor Name: Intel Core i7
Processor Speed: 2.6 GHz
Number of Processors: 1
Total Number of Cores: 4
L2 Cache (per Core): 256 KB
L3 Cache: 6 MB
Memory: 16 GB
Boot ROM Version: MBP101.00EE.B05
SMC Version (system): 2.3f36

I hooked my internal as an external up to my Mom's Macbook Pro and it recognized my HD. I'm thinking it is something internal with the hook-up, which is awesome, because maybe I can actually fix it!!!! Any thoughts?

In disk utility, it shows that my external hard drive is somehow unmounted and I can't access it in finder or repair it in Disk Utility. How can I get this working without losing my important data?

In disk utility, it shows that my external hard drive is somehow unmounted and I can't access it in finder or repair it in Disk Utility. How can I get this working without losing my important data?
Thank you!

When you erased the disk did you select Mac OS Extended Journaled as the format option?

C:/ disk is not showing on my computer window server 2003 standard edition (UCCX7.0)

Hi all,
Today I was checking the server and I find that C: disk is not showing Under "My computer" whereas it is showing under disk management and its status is okay. Please tell what the problem and how I resolve that issue? Because server is in production and we can't afford sudden downtime.
Regards
Ali Raza

Hi Walter,
OS image is 2003.1.5.
Regards
Ali Raza

My Startup Disk can not show in Finder.

My Startup Disk can not show in Finder.but it can be used in OSX normally.
So can I put it back to Finder?

If the startup disk is for Mac OS 9, neither MacBook nor PowerMac G5 can boot into 9. Only the PowerMac G5 can use Mac OS 9 in Apple menu -> System Preferences -> Classic.
Please be more detailed what sort of Startup Disk you are talking about, which operating system, and which machine this is a problem with.

Disk Utility not working on Yosemite

Hello all,
Since updating to the latest OS X Yosemite I've noticed that Disk Utility no longer works. I use Spotlight to search for "Disk Utility" or click on the file within the "Utilties" folder but yet it still brings up the following error message:-
Any suggestions on how to solve this would be greatly appreciated.

Sounds like you have two versions of Disk Utility available to use. Did you clean install? Are you running separate partitions with different OS X systems? Search with spotlight and choose show in finder at the bottom of the list. Double click the Finder Ikon in the main window, this will open a finder window with all the search results. Applications should be your top hit. If you have two Disk Utility's showing, Single click on each and the path for each will be displayed in the bottom bar of the Finder window. Or Command-I will bring up the info window on each one.
Hope this helps.
PJRS

Disk Utility not recognizing externals correctly

I have two external hard drives that are connected through a USB 2.0 hub. One is called "Photo Store" and the other is called "Photo Store Backup". When I load them, they both show up on the desktop properly. However, when I load Disk Utility, things show differently. They show as separate physical drives, but with the same name and all the same information (UUID, etc.). At the same time, it still shows the drives on the desktop properly.
What can I do to fix this?

My fix was to just reformat one of the drives. That changed the UUID which was conflicting between the two drives.

Hard Drive not showing in Disk Utility (but showing fine on PC)

I have been using an 1TB USB powered Hard Drive with my MBP for a year or so.
I got a new 2 TB drive and loaded it and installed the seagate dashboard software.
At that point, it appears something may have happened to my HP and it no longer appears on my Mac or in Disk Utility. It appears to be getting power, and it shows up fine on a Windows PC.
Any thoughts??
This one is really baffling me?
Thanks

One other note
A folder called TheVoumeSettingsFolder now appears on the HP, in case that is causing the issue.
Thanks

My Macbook Pro mid 2012 is not reading/connecting to my (working)external hard disk(also not showing in disk utility)

I connected my 500GB Storjet external hard drive to my mac(Mountain Lion) http://in.transcend-info.com/products/Catlist.asp?modno=325 but it is not connecting to it. Disk Utility is also not showing it. and the hard disk is working... My PS3, My Sony TV and my other laptop(win7) is detecting it... Also whenever it gets connected a blue light blinks, but It doesnt for mac. I have tried reformatting to both FAT32 and NTFS... Please help..
Also I sorta screwed my Mac so I had to do the internet recovery thing and only after that such problems occured, it was working fine before. So it installed Lion first and then Mountain Lion. It wasn't working on any of the OS.

Power down the Mac, Full power off. Connect the drive using the Y cable and then turn the Mac back on.
If it still doesn't show in at least Disk Utility then start checking your USB ports to see if both are working properly. Just plug in a USB thumb drive and that should show in both Finder and Disk Utility. If one of the ports isn't seeing the thumb drive then that port is bad and the system needs to be services by Apple.

Disk utility not showing!!!

Similar Messages

Maybe you are looking for