Disk Utility Problems - Volume Needs Repair

Hi,
I have an iMac G5 (PowerPC) and when I ran Disk Utility I get the following error:
+"Verifying volume “Macintosh HD”+
+Checking HFS Plus volume.+
+Checking Extents Overflow file.+
+Checking Catalog file.+
+Illegal name+
+Checking multi-linked files.+
+Checking Catalog hierarchy.+
+Checking Catalog hierarchy.+
+Checking Extended Attributes file.+
+Checking volume bitmap.+
+Checking volume information.+
+Volume Header needs minor repair+
+to be repaired.",1)+
+Macintosh HD+
+Error: The underlying task reported failure on exit+
+1 HFS volume checked+
+ Verifying volume “Macintosh HD”
Checking HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Illegal name
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Checking volume bitmap.
Checking volume information.
Volume Header needs minor repair
to be repaired.",1)
Macintosh HD
Error: The underlying task reported failure on exit
1 HFS volume checked
Volume needs repair"+
When I try to load off the Install CD to do the repair, I get an error saying something about "Kernal" and a grey box saying I need to restart.
I ran TechTool Deluxe and it did not find any problems.
What do I need to do to resolve this? I am not exactly sure what is wrong as I am not THAT technically inclined.
Any directions/help is greatly appreciated.
Thanks

Welcome to Discussions - what you are having are kernel panics, see Dr Smoke's Resolving Kernel Panics and follow his directions.
Let us know how things work out,

Similar Messages

  • Disk Utility says volume needs repair, tests failed. Now what?

    What exactly does this mean? Unfortunately, I bought this TiBook from a classmate, and he didn't have his Tiger DVD, so all I have is 10.0 and a 10.1 upgrade. Do I have to use this to re-install?
    Thanks!
    Jim

    Hello James:
    Since you do not have the Tiger DVD you have a few choices (none particularly good). You should ALWAYS have the software install DVD - I am not sure what will happen when you run repair disk from an older software install CD/DVD. You will be unable to reinstall Tiger unless you have the proper DVD. I would return the iBook and get my money back from your classmate unless that person produces the proper software.
    Incidentally, if Apple's repair disk (run from the CD/DVD) is unable to repair problems, DiskWarrior is the next option. DW is the 'gold standard' of directory repair, but it is pricey at about $90.
    Barry

  • Disk utility stopped verifying; need repair... over and over and over

    I've gone through the restart, Command+R drill 4 times. Repaired the disk using "Disk Utility." Restarted after repair, ran disk utility to verify the repair and BAM disk utility stops verifying and instructs me to restart ... etc.
    The errors have been consistent: orphaned blocks, invalid volume free block count. But when I use utility disk after restarting and pressing command+r, the "repair disk" does not appear to do anythign beyond "Load and Verify" freespace summary and block accounting. Am I missing a step?
    Any suggestions appreciated.

    That article does not pertain to the OS you are running. "This article has been archived and is no longer updated by Apple."
    It pertains to using fsck not Disk Utility for:
    Products Affected
    Mac OS X 10.3.9, Mac OS X 10.4, Mac OS X 10.5, Mac OS X Server 10.2, Mac OS X Server 10.3, Mac OS X Server 10.4, Mac OS X Server 10.4.7, Mac OS X Server 10.5

  • Disk Utility - Partition map needs repair because a data partition needs loader space.

    I just finished setting up both my OSX and Windows installs from scratch after fitting an SSD, which in-turn was right before my logic board died and Apple replaced it, now it looks like I have some sort of hard drive issue brewing.
    This was my plan for the SSD, and how it currently displays in Disk Utility although that wasn't the case earlier:
    And in Terminal:
    My intention was to have two boot partitions for each OS, 'Macintosh HD' and 'Win 7 Pro' and a third shared data partition 'Projects' on the SSD, which I made in Drive Genius after installing Boot Camp. I don't want Macintosh HD accessible from Windows because I'll be using Paragon HFS+ or MacDrive to give write access and don't want OSs stomping on other OSs turf, hence needing three partitions. Everything looked fine until I just checked Disk Management under windows and realised it couldn't see the Projects volume. Even though it's fine in OS X, it was just marked black/unallocated space.
    So I booted back into OSX, all my files look fine so I ran Disk Utility and the Partition tab looked really odd - unfortunately I didn't get a screenshot. All volumes reported their size correctly but visually, Macintosh HD took up most of the drive. I could see 'Windows 7 Pro' under this, but the Partition Layout section had a scrollbar, which if I scrolled down showed 'Projects' squished into a tiny gap at the bottom. I ran a Verify, which reported no problems, and at some time since the Partition Layout has reverted to how it should look (as in the screenshot above), with 'Projects' book-ended by "Macintosh HD' and 'Windows 7 Pro'.
    Now when I run a Verify on Macintosh HD or Projects volumes, it says there's no problem, but if I run one on the drive, I get this message:
    Volume Macintosh HD on disk0s2 has 0 bytes of trailing loader space and it needs 134217728 bytes
    Problems were found with the partition map which might prevent booting
    Error: Partition map needs repair because a data partition needs loader space.
    I've only managed to find one other mention of this error here, but the fix is not relevant to me because I don't have Sophos installed. I've tried Single User/Safe Mode but it just boots into normal mode, so I can't do a fsck -fy.
    ** /dev/rdisk0s2 (NO WRITE)
    Can't open /dev/rdisk0s2: Permission denied
    That value in bytes is exactly 128mb, so I suspect the problem lies with one of the invisible partitions that show up in iPartition and Disk Management under Windows, but not in Disk Utility. I have backups and I suspect the root of the problem is partitioning in iPartition after installing Boot Camp, but I've never had issues with this approach in the past so I'm wary of just giving up and reinstalling Windows again will be massive hassle because I no longer have a SuperDrive and last time it refused to install from USB.
    Anyone have any idea what's going on? It seems like the sort of issue Disk Utility should just handle, at least in Recovery mode, but it's not playing ball. It also doesn't seem like a massive problem since my files all look fine and performance is OK, so I'm reluctant to do anything major.
    I'll update with a shot of the drive in Disk Management from Windows in a few minutes, in case that sheds light on anything. Thanks!

    Similar issue here. I manually partitioned my hard disk for triple boot (using Gparted on Linux), then everything was just fine until I ran bootcamp, to do something as simple as create a boot USB.
    I get the same error as a result and have to work my way into booting, by resorting first to a Linux live USB, then restarting from the live USB, to finally reach my rEFInd boot manager, or whichever boot manager should be initialized at startup.
    I suppose that the cause in my case is that some operation "scratched" the protective MBR. See this:
    http://www.mactech.com/articles/mactech/Vol.23/23.03/APMtoGPT/index.html
    I am hoping to fix it using an external Yosemite installation media: see this guide -
    http://www.macworld.com/article/2367748/how-to-make-a-bootable-os-x-10-10-yosemi te-install-drive.html
    And as a last resort to reinstall.
    I'll admit I am negatively surprised. I need this computer for professional reasons, and for the sake of "preserving the integrity of OSX", measures defined by Apple instead tend to make partitions far easier to damage. And this problem seems to affect a number of users.
    As for what I have to go through to fix it: a 5GB download, during which I have to register my credit card to the Apple Store. "Pay first, get your free software next."
    IF Disk Utility can fix it, from the external media, then fair enough. The hassle is unpleasant but it files as "a choice".
    Otherwise you can file it safely under software design calamity.

  • Disk Utility says HD needs repair-how to boot from original disk?

    Hi,
    My iMac has been acting up badly. Finally on Friday, it had trouble turning on and a burning smell arose from the top. Came on but with the blinking folder with question mark. So turned it off and tried again to turn on: no chime and couldn't turn it on.
    Went to Genius bar this a.m. Tried different cord. It turned on. Everything came up fine. Genius ran special test. Everything came back with green check. But he said the internal hard drive could very likely be starting to fail.
    Back home. Just ran the Disk Utility to "Verify." It couldn't continue verification. Got these messages:
    Invalid volume directory count.
    Error: Filesystem verify or repair failed.
    The volume Macintosh HD needs to be repaired.
    Questions:
    1) Can I repair using the First Aid utility (or is it more about getting a new HD)?
    2) If so, can someone remind me what keys to press on startup to boot from the CD?
    3) I have 10.5.8 right now. Can I still boot from the original Tiger installation CD and use that Disk Utility?
    Thanks for your urgently needed help!

    If you're on 10.5.8 have you not got that disk as that would probably be the best one to use? If not, the disk that came with your Mac should still boot up. Disk in drive and restart holding down the 'C' key. Hopefully it'll boot - albeit slowly. At the multi-language screen choose your language and at the next screen from the menu bar select Utilities>Disk Utility. Select Macintosh HD on the left and 'repair disk'. Hopefully it'll do the necessary repairs. If it fixes anything click 'repair disk' again until you get a clean pass and then from the Apple menu restart as normal.
    If you haven't got a backup make sure you make one ASAP.

  • Disk Utility Question? Volume needs repair

    Hi ALL, I need some help. My system seems to be running slow, so I did a repair permissions - that was OK then I did a Verify Disk and got the message."First Aid Falled" -"Volume Header needs minor repair
    d.",1)
    S&M Hard Drive
    Error: The underlying task reported failure on exit
    1 HFS volume checked
    Volume needs repair " I have my Tiger Update disk but it will not bootup from it - not sure why? I do have my old install disk form my old iMac Version 10.1 - can I bootup from this disk and try fixing the issue? I would rather download something that's not expensive or free to help fix the issue. Any and all HELP would be GREAT!!!! THANKS Scott

    Because the new software is insane. If there is a leading space on a line the line gets deleted. There's more insanity as well, but I would guess that's the problem with your post.
    Anyway, your problem is that there is minor damage to your startup disk, which can probably be repaired. However, you can't repair the disk while booted from the disk. Boot from your install disk, then go to the menu and find Disk Utility there and use it to run the repair function, then reboot. If Disk Utility still can't repair the damage you need to buy a copy of Disk Warrior and use it.
    Francine
    Francine
    Schwieder

  • Disk Utility: "Volume needs repair" - what to do?

    I just ran Verify Disk and got this result:
    Verifying volume “iBook HD”
    Checking HFS Plus volume.
    Checking Extents Overflow file.
    Checking Catalog file.
    Incorrect block count for file Database3_BROKEN-journal
    (It should be 25 instead of 0)
    0
    Checking multi-linked files.
    Checking Catalog hierarchy.
    Checking Extended Attributes file.
    Checking Extended Attributes file.
    ,1)
    1733913 /Library/Logs/Console/501/console.log.0
    Overlapped extent allocation (file 1734737)
    Checking volume bitmap.
    Volume Bit Map needs minor repair
    Checking volume information.
    Invalid volume free block count
    (It should be 8593446 instead of 8593471)
    The volume iBook HD needs to be repaired.
    Error: The underlying task reported failure on exit
    1 HFS volume checked
    Volume needs repair
    How do I repair this volume?
    bob.m.

    bob:
    Disk Utility reports "Underlying task reported failure" when repairing a volume is a serious directory error which Disk Utility cannot repair.
    •I suggest you read through the article.
    •Then, if you do not have an up-to-date backup, it will be a good idea to try to save as much as you can of your data.
    •The article suggests using a third party utility. Disk Warrior and Tech Tool Pro are the best utilities for this job. You will need to get one of them and run it, by booting from the CD, or installing it on an external firewire drive or on a second Mac which you can then run in Firewire Target Disk Mode.
    Please do post back with further questions or comments.
    Good luck.
    cornelius

  • Disk Utility says I need to repair disk

    My computer is running a little sluggish so I went into the Disk Utility and selected verify disk. I got the message below. I inserted the OS X disk but the repair disk option wasn't available. I bought the computer with Panther and got Tiger later, unfortunately I don't have the Tiger disk. How do I fix this problem?
    Verifying volume “Macintosh HD”
    Checking HFS Plus volume.
    Checking Extents Overflow file.
    Checking Catalog file.
    Checking multi-linked files.
    Checking Catalog hierarchy.
    Checking Extended Attributes file.
    Checking volume bitmap.
    Volume Bit Map needs minor repair
    Checking volume information.
    Macintosh HD
    Error: The underlying task reported failure on exit
    1 HFS volume checked
    Volume needs repair

    If you are running Tiger, you need the Tiger install disc you purchased in order to run Disk First Aid repair.
    And withhout your Tiger install disc, you cannot perform an Archive & Install retaining Tiger, etc. so bad move not keeping this in a safe place.
    Your only other option is running fsck.
    http://docs.info.apple.com/article.html?artnum=106214

  • Volume needs repair AND hard drive problem...

    OK so I have an Intel Based iMac and its about 1 year old. Randomly I got a message saying that the hard drive disc space is almost full, which makes NO sense. I have a 250 hard drive and I use it mainly for video editing. Before I got this message, I had about 100 GB left on my hard drive. I have NO CLUE where 100 GB went to, and i know it was not from video. Also I went to the disk utility and it said "Volume needs repair" and it gave me an "The underlying task reported failure,". Im not sure what to do and I'm hoping you guys will.....if this has been asked before, I apologize.

    Yes, you can delete it, but it indicates a bigger concern namely your maintenance scripts aren't running regularly to clean up the logs or you have a problem in the system or an application that is writing huge amounts of information constantly into the log file. You should check the log using the Console application (Utilities folder) and examine its content to see if this is the case.
    You should also read the following for information on installing utilities that can assure the maintenance scripts are run as well as other information on system maintenance that can help keep your computer running better.
    Kappy's Personal Suggestions for OS X Maintenance
    For disk repairs use Disk Utility. For situations DU cannot handle the best third-party utilities are: Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.0 is now Intel Mac compatible. TechTool Pro provides additional repair options including file repair and recovery, system diagnostics, and disk defragmentation. TechTool Pro 4.6.1 is Leopard compatible; Drive Genius is similar to TechTool Pro in terms of the various repair services provided. The current version, 1.5.1, is Intel Mac compatible.
    OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep.
    OS X automatically defrags files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems.
    I would also recommend downloading the shareware utility TinkerTool System that you can use for periodic maintenance such as removing old logfiles and archives, clearing caches, etc.
    For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the commandline. Note that presently AppleJack is not compatible with Leopard.
    When you install any new system software or updates be sure to repair the hard drive and permissions beforehand. I also recommend booting into safe mode before doing system software updates.
    Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
    1. Retrospect Desktop (Commercial - not yet universal binary)
    2. Synchronize! Pro X (Commercial)
    3. Synk (Backup, Standard, or Pro)
    4. Deja Vu (Shareware)
    5. PsynchX 2.1.1 and RsyncX 2.1 (Freeware)
    6. Carbon Copy Cloner (Freeware - 3.0 is a Universal Binary)
    7. SuperDuper! (Commercial)
    8. Data Backup (Commercial)
    The following utilities can also be used for backup, but cannot create bootable clones:
    1. Backup (requires a .Mac account with Apple both to get the software and to use it.)
    2. Toast
    3. Impression
    4. arRSync
    Apple's Backup is a full backup tool capable of also backing up across multiple media such as CD/DVD. However, it cannot create bootable backups. It is primarily an "archiving" utility as are the other two.
    Impression and Toast are disk image based backups, only. Particularly useful if you need to backup to CD/DVD across multiple media.
    Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
    Additional suggestions will be found in Mac Maintenance Quick Assist.
    Referenced software can be found at www.versiontracker.com and www.macupdate.com.

  • OSX Lion Disk Utility won't verify/repair RAID volumes

    SInce I upgraded to Lion (now at 10.7.4) I can't use the Disk utility to verify or repair the disk catalog (disk first Aid) on apple soft RAID volumes. These volumes were created in 10.6 use the Apple RAID feature of disk utility.
    I have one striped and one concatenated volume - neither will work. Press the button and the progress bar flashes for a fraction of a second, then nothing. no error, no message in the window - just no repsonse. Works fine on non raid volumes in the same disk enclosure -Firmtek Seritek/5PM, with seritek 2ME4-E sata card.
    Not sure I really want to recreate and recopy the drives....
    Any ideas? Seaches haven't turned up this specific issue.

    A quick search in these forums for permissions or *permissions problem* reveals many posts the past four months.
    In a nutshell, repairing permissions w/Leopard takes anywhere from 10-40 minutes, depending on what's installed and what's contained in /Library/Receipts/bom/. The repair permissions operation has changed in Leopard. The stalled progress bar is an unresolved bug (they haven't figured out how to make it work whilst it's checking or rebuilding the a.receiptdb, in /Library/Receipts/db/. To see what's really going on, open that folder in a Finder window, select list view, launch Disk Utility, select your boot volume, and click on repair permissions. Watch the Finder window flash files that are being read and checked against the current a.receiptdb file. That's what's taking all the time and freezing the progress bar. Once that's finished, the progress bar starts moving and the permissions are being checked and repaired. Also note, that you won't get any *they were repaired* message back for any that are noted to be incorrect.

  • Volume needs repair

    Disk Utility First Aid reports the following:
    Verifying volume “Macintosh HD”
    Checking HFS Plus volume.
    Checking Extents Overflow file.
    Checking Catalog file.
    Invalid node structure
    The volume Macintosh HD needs to be repaired.
    Error: The underlying task reported failure on exit
    1 HFS volume checked
    Volume needs repair
    sudo fsck_hfs -l /dev/disk0s2 reports as below:
    ** /dev/rdisk0s2 (NO WRITE)
    ** Root file system
    ** Checking HFS Plus volume.
    ** Checking Extents Overflow file.
    ** Checking Catalog file.
    Invalid node structure
    (4, 27421)
    ** The volume Macintosh HD needs to be repaired.
    I've tried to boot up on OSX Installation disk and run Disk utility from there but with no success on repairing the fault.
    Anyone who knows how to solve this problem? What does (4, 27421) mean?
    Thanks!
    Johan
    MBP 17" Core Duo 2.16MHz   Mac OS X (10.4.9)   2GB RAM

    JS_MACNewBie,
    Assuming Disk Warrior can successfully repair your file structure (good luck, BTW), this doesn't mean that you are "out of the woods."
    When you have a disk error, especially one as serious as the current one, some files will undoubtedly be damaged. Repairing the file system, when successful, does not repair the damaged files; it only returns the file system to a "consistent" state.
    If these damaged files are critical system files, you are going to continue to have problems. Disk Repair utilities (Disk Utility included) are indispensible tools, but they should be used only in emergencies such as yours to facilitate making a good backup prior to formatting and reinstalling.
    Only by formatting, then reinstalling can you "fix" the files that may have been damaged by the disk error. I recommend that you do this immediately, once you are able to make a good backup of your important files.
    Scott

  • Stuck in reboot-Volume needs repair?

    Stuck in reboot. Able to reboot using my start up disk, ran disk utilities, after running "repair disk" I get the message "HFS Volume repaired" then I ran "verify disk" I get the message "0 HFS volume verified- 1 volume needs repair. I ran each, ""repair" and "verify" several times and get the same conflicting messages and I still get stuck in reboot when trying a "normal reboot". So it looks like my hard drive needs repair? I may have access to a "Tiger" install disc which I understand has improved disk utilities, should I try this on my Panther machine? Thanks.

    As Sherry has already helpfully noted, the retail Tiger 10.4.2 (or later) Install DVD has a version of Repair Disk that has significantly improved disk repair capabilities compared to earlier versions. It remains true, however, that the best-recommended utility for handing disk directory problems is DiskWarrior. That's an option if the Tiger 10.4.2 + version of DIsk Utility can't make the necessary repairs.
    Reagrdless of what utility you use, anytime you run a repair utility that reports making a repair, best practice is to immediately run the repair (not verify) utility again. Many times, one error blocks discovery of other errors, so you want to run the repairs until you either get an all-clear report or it becomes painfully obvious to you that the repair utility isn't working.
    If you mentioned this earlier, I managed to miss it: what does Disk Utility say about the SMART status of the hard drive? If the SMART status is reporting failed, you might as well skip Disk Warrior and look to borrow another Firewire-equipped Mac so that you can try booting into FireWire target disk mode to recover what you can from your hard drive. Data Rescue has a one-file free evaluation mode; you could try that on the second Mac to see if it'll help you recover your data in the case of a failed SMART status.

  • Volume needs repair message for second hard drive

    I am getting the following message on my second hard drive (This hard drive just has data. OS is on the main HD)
    Verifying volume “Mac Second HD”
    Invalid Volume Header
    Checking HFS Plus volume.
    Invalid number of allocation blocks
    The volume needs to be repaired.
    Error: The underlying task reported failure on exit
    1 HFS volume checked
    Volume needs repair
    Any advice on what to do? Can I save my data?
    G4 Silverline   Mac OS X (10.4.3)  

    Hi Ketan,
    Welcome to the Discussions.
    If Disk Utility can't repair it try DiskWarrior. It can repair most drive directory problems.
    John

  • Startup Problems : Verify Disk (Disk Utility) Problems

    •Round 1 : Okay...So, here's my newest problem. Occasiionally I'll start my MacBook and sometimes it'll boot just as normal as it always does...or sometimes it will start to boot normally...passing through the grey screen and on to the blue screen with the progress bar...but once it gets to the blue screen...it just sits there. After a few minutes of pushing random buttons...I finally have to hold down the power button and force it to shut down. Then I start it back up and off we go...just like nothing ever happened. Any ideas / suggestion?
    •Round 2 : Sometimes I will start my MacBook and the light on the front with come on to say "Hey, I'm On" ... the CD-ROM will make it's usual noise...the screen will be black...and the "Hey, I'm On" light just remains on for a few then it boots. Just a really slow process. Any ideas / suggestions?
    •Round 3 : In Regards to Round 1 : I tried to do a Verify Disk to see if anything came up and sure enough...something did alright. I've pasted below what it tells me:
    Verifying volume “Macintosh HD”
    Checking HFS Plus volume.
    Checking Extents Overflow file.
    Checking Catalog file.
    Checking multi-linked files.
    Checking Catalog hierarchy.
    Checking Extended Attributes file.
    Checking volume bitmap.
    Volume Bit Map needs minor repair
    Checking volume information.
    Invalid volume free block count
    (It should be 6024381 instead of 6001488)
    The volume Macintosh HD needs to be repaired.
    Error: The underlying task reported failure on exit
    1 HFS volume checked
    Volume needs repair
    •Round 3 (CONT) : From there it does not give the option to repair. If I do Verify Disk Permission & Repair Disk Permissions...it runs through like a fat kid with a pack of Oreo's. Any idea / suggestions. Thanks as usual fellow Apple Nuts

    Well...last night immediately after I made this post...I backed everything up to a FireWire HD and more or less did what you said. Booted from the CD and ran Disk Utility and did a repair. Double checked that repair and rebooted as normal. Came up and tried to run a few things that I had noticed that would slow / bog down my machine...Now everything seems to be great. Thanks for the help!

  • Error after running Disk Utility,  do I need to replace disk drive?

    Don't know much about MACS, switched from PC to MAC, will NEVER go back, I asked the person what they think and said " sounds like I have to replace my Disk Drive, I recently replace the Hard Drive, still new to MACS so don't know my way around yet, still trying to learn more, any suggestions mag subscriptions, books in plain english?
    thanks in advance, for taking the time to respond.
    Lately when I've ran Disk Utility I've been getting this message:
    *Verifying volume "Macintosh HD"*
    *Checking HFS Plus volume.*
    *Checking Extents Overflow file.*
    *Checking Catalog file.*
    *Incorrect block count for file Database3_BROKEN-journal*
    *(It should be 6 instead of 0)*
    files.",0)
    *Checking Catalog hierarchy.*
    *Checking Extended Attributes file.*
    *Checking volume bitmap.*
    *Volume Bit Map needs minor repair*
    *Volume Bit Map needs minor repair*
    ormation.",0)
    *Invalid volume free block count*
    *(It should be 18925736 instead of 18925748)*
    *The volume Macintosh HD needs to be repaired.*
    *Error: The underlying task reported failure on exit*
    *1 HFS volume checked*
    *Volume needs repair*
    What's the difference between buttons *" Verify Disk Permissions & Verify Disk "*?
    After I run Verify Disk Permissions, the outcome is fine, but after I run Verify Disk, I get the error message above.
    So once getting the error message, I'd click the *" repair disk permissions "*, I get "
    *Repairing permissions for "Macintosh HD"*
    *Determining correct file permissions.*
    *Permissions repair complete*
    *The privileges have been verified or repaired on the selected volume "*.
    But soon after its been repaired, I click the " Verify Disk " again just to see if it'd give me the same error message, its the same every time.
    So is it really repaired you think?

    Hi, hellopinky. The error messages you're seeing don't necessarily indicate that you need to repair your hard drive. Your drive could be failing, and that might cause the reported problems, but there are other causes for those errrors besides a failing drive. If the S.M.A.R.T. status indicated in the First Aid tab of Disk Utility says "Verified", your drive is probably fine. If the S.M.A.R.T. status is "Failing", replace the drive immediately. That indicates a hardware problem that no software can fix.
    "Repair Disk" and "Repair Disk Permissions" address two different classes of software problems. The former button repairs (or tries to repair) problems with the directory that records what's on your hard drive and where on the drive each item is stored. The latter button checks to make sure the read/write permissions for your files are correct, and if not, it corrects them.
    The "Verify" buttons for Disk and for Permissions carry out the same checking routines as the "Repair" options, but they don't try to correct anything — they only report what they find. If there's a problem on my hard drive, I want it corrected, not just reported. So I consider the "Verify" options to be a real waste of time, and I never use them.
    Your permissions appear to be fine, but your disk directory is damaged in at least one way that Disk Utility hasn't repaired. If you haven't run the "Repair Disk" routine yet (I can't tell from your post), do that now, and see whether it reports that the problems have been fixed. If it does, run it repeatedly until you get two successive reports showing a clean bill of health: no problems found or repaired.
    If "Repair Disk" reports problems that it couldn't fix, or if you can't get two successive "clean" runs after half a dozen tries, you'll need a stronger, third-party disk utility such as DiskWarrior to repair the directory, or else you'll need to reformat the hard drive and reinstall everything on it from scratch — that will clear away the old, damaged directory, but is very time-consuming. Leaving a damaged disk directory unrepaired will eventually lead to loss of data, kernel panics, and other potentially serious consequences you really don't want to experience, so don't just ignore the problem.

Maybe you are looking for

  • 8.1.7.3.0 SQL_ATTR_METADATA_ID

    Oracle added support for SQL_ATTR_METADATA_ID in release 8.1.7.2.0. However, by default it was set to SQL_FALSE, which forced case sensitive. In 8.1.7.3.0, they added a workaround in the ODBC Administrator configuration "Set Metadata ID Default to SQ

  • How to get Document from Element?

    I try to get the document root (org.w3c.dom.Document) of a DOM object starting from an element (org.w3c.dom.Element). Is element.getOwnerDocument() the current method for this?

  • Calling a servlet in an ADFFaces pages

    Hi All, I have this code:     public void handleReturn(ReturnEvent returnEvent) {         // Add event code here...          if (returnEvent.getReturnValue() != null)            setLongAddressType( (Long) returnEvent.getReturnValue());            // 

  • LMS and MDS 9148

    Unable to collect Inventory for a MDS 9148, following error : RICS0001:Internal Error,unable to process the collected data from the device. I have deleted the item and re-created LMS 3.2 ; RME 4.3.1 MDF and devices up todate.

  • Share to YouTube

    This afternoon I will be doing a video for a music scholar at the local university for him to use as an audition piece.  He needs it uploaded to YouTube on the double, so I thought I might take my MBP along, and do it right then and there. I have a Y