DIsk Utility Question w/ usb drive

I have a 2 gig usb drive that i use for everything, keep my school notes, a couple small programs on it etc. and last night i installed xp using bootcamp. i wanted to partition my usb drive into 2 partitions, one that i can continue to use with my mac, and one like a bridge to transfer files etc. i went into disk utility today to do that and then selected my usb drive, went to the partition tab, and it presented me with this statement
does anyone know how to fix this, or how i can partition this usb drive? and ive already backed up the information on the usb drive to a cd. thanks for the help...
troy
g4 mac mini, 2 ghz white macbook Mac OS X (10.4.8) 3rd generation ipod

i relaunched disk utility and it said the same thing as before. i restarted, the same thing, shut down for an hour and a half, same thing. the usb drive is just the little dongle kind, the one where you can just carry it around in your pocket, so it doesn't come with a power supply, so thats a no-go. i tried to go into the partition section of my actual harddrive, and it works good, shows the 10 gb winxp partition and the 50(or so) gb mac osx section so it isn't the computer. any other suggestions? thanks
troy

Similar Messages

Disk Utility says of USB Drive - "This partition can't be modified" "This disk is not writeable and cannot be partitioned"

Several months ago I bought a 64GB PNY USB memory stick to transpord data quickly.
It seemed to work fine. I could format it as a Mac partition and use it. I hardly ever need
it so I just put it away.
Today I wanted to use it to put a file on and take it to the Kinko's/FedEx to print, and I
find I cannot mount it on any of my computers, iMac, MacMini or MacBookPro.
In Disk Utility virtually everything is greyed out.
Disk Utility says: "This partition can't be modified" "This disk is not writeable and cannot be partitioned"
If I try to mount it, it says "This disk cannot be mounted"
There is no physical read-only switch or setting on the disk that I can see and it is very small.
I has a Mac OS installed on it, so I wonder if that is a problem? I should be able to write over that
or reformat it I would think.

Thanks for these replies.
I've got regular time machine backups and just backed up some of my data by copying some key folders to an external drive. I'm bit paranoid about backup integrity and would ideally like to do another full backup to a different drive using a system other than time machine, in the event that something goes wrong with the time machine backup. Any recommendations on good and affordable backup software to do a backup of my TM backup?
One other question: I seem to encounter problems like this pretty frequently. I'd say once a year or so, my drive fails completely or gets near enough to failing that I have to wipe and restore. (I've never had a TM backup fail to work, though the last go around there were some hiccups which has led to my backup paranoia.) I've had this happen on multiple computers, so I'm becoming pretty convinced that the problem lies somewhere in my data. Is it possible (even likely) that there's something in my data causing this recurring problem? If so, is there anything I might be able to do to try and pinpoint and address this problem? I'd love to go one year without having to wipe/restore my machine!
For a while I thought I just had bad luck. But I think this is like the 4th or 5th time this has happened in the past 4 years and every time, I'm restoring from a backup, so I come back with the same data. It's the one constant since I've had 3 different machines over this same time period.

HT4848 how to erase the disk utility from my usb portbalbe flash drive

how do I erase the disk utility from my usb portbalbe flash drive. I need the flash drive for other stuff and it isn't allowing me to do so.

Here is information on the recovery partition, includin how to remove it from a drive: http://reviews.cnet.com/8301-13727_7-20083166-263/managing-the-os-x-10.7-lion-re store-drive/

Im attempting to start up from OSX 10.4.9 back up disc on my Macbook 13inch but it starts up and am able get to utilities then disk utility but my internal drive doesnt show in options on left can anyone help ?

Hi all my trusty macbook 13 inch 5 years old has let me down get a box with question mark in it when i switch on , so apple support tells me to try ans start by back up OSX 10.4.9 disk the built in drive doesnt work so i am using an external toshiba drive .
I switch on holding down c key an apple logo comes on and it starts up im able to acess utilities then disk utility but in the options on the left there is only the Backup disc and the external drive showing my internal mackintosh drive wont show so i cant move further any help

If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead.

Using Disk Utility to erase Hard Drive

Hi All
I just bought a new external hard drive and am using Disk Utility to erase and format it. I did not know for sure if erasing the hard drive was the right thing to do. Anyway I set up the Volume as follows from the mac help instructions:
1.format OS extended journaled
2.Install OS9 disk driver.
3.("Zero all data" and "8 Way Random Write Format"). So it has been running for about 3 hours now and is only 1/8 of the way writing 0's to disk.
My question is should I continue on and just let it finish up? At the rate it is going It might be done by sometime tomorrow.
Or can I stop the erasing process without hurting the hard drive.
Then start disk utility erasing the hard drive without this Zero all data.
Thanks much

Just to confirm your impression, S. Frigolett: yes, everything should be fine now.
Zeroing a drive is advisable if you have reason to believe there may be bad data storage blocks on it; zeroing identifies those blocks and prevents them from being used (because using them would result in lost or corrupt data). A simple erase doesn't do that, but on a new drive straight from the factory there is no reason to think it's necessary.
The 8 way random write option is for people who have extremely sensitive data to erase from a drive that may pass into other hands, and who want to be sure that no one short of the NSA will have any chance of recovering any of that data. A new, empty drive has nothing on it that even the NSA could recover, so there's no reason to erase it that thoroughly.

How does disk utility decide which optical drive to use for burn?

This is a somewhat daft question and purely out of interest.
How does disk utility decide which optical drive bay to open for burning?
I have two drives in a MacPro and both have the same capabilities (DVD-RW). Why does it sometimes open the lower one, and sometimes the top one?

Grant Bennet-Alder wrote:
The estimate is based on how long it already took to do how many blocks, and how many blocks are left to do. If you told it to overwrite 35 times, it will be a long, long time before it completes.
The estimate is made grossly large by the presence of Bad Blocks that need to be Read during the test (not the case with Erase and Write Zeroes).
Each Block is written with some redundancy bits, so that small errors can be corrected on reading. A Bad Block causes the drive to re-read. and re-read, and re-read, in hopes of getting correctable data the next time. This should NOT be an issue in writing. But if the drive stops responding (which can and does happen with a bad drive) the Erase function will just sit there, thinking it is making progress, and stretching out the time.
Thanks, Grant.
If I read your reply correctly, Erase and Zero Out free space shouldn't elongate the process, because there's no read occurring.
The drive will not be Mounted while Disk Utility works on it, so it will not be on the Desktop. But ask Apple System Profiler \[ About this Mac > More Info > Serial ATA ] if the drive is still THERE . If it cannot be seen, you have your answer -- the drive dropped out of sight while being tested -- Bad Drive.
Well, now I am confused. It's a FW800 drive. It's on the Desktop. And it appears under FireWire in System Profiler. AND Disk Utility shows a mount point. But the Unmount and Eject buttons are grayed out.
Will the drive be mounted if it fails to respond to Disk Utility? That doesn't seem to make sense.
How do I determine its status? It appears to be stuck at "1 day, 5 hours" but it'll take an hour for that to change. I think it's been that long since I first noticed the time.
Harv

"Repair Disk" option in Disk Utility need to repair drive.

I have a Seagate GoFlex Desk 2TB external hard drive. I use it as a backup drive for Time Machine. When I plug it into my iMac it dosen't open, I opened Disk Utility and clicked "Verify Drive" and then I got this...
I have backups on this drive. If I click "Repair Drive" will I lose the data on the drive?

After I Repair the drive this is what I get...
What should I do now? Is my drive bad?

Will Restore in Leopard Disk Utility reliably copy a drive with bootcamp?

I have a drive partitioned part OS X and part Bootcamp (with Windows XP installed). If I use Apple's Disk Utility to 'Restore' the drive (to copy the drive to a larger drive) will this work reliably for bootcamp as well as the OS X content? Presumably this just clones the drive?

Once you install MacFUSE you can not use the Startup Disk Utility anymore to boot into Windows, you need to hold the option key every time.
As you stated, NTFS is owned by Microsoft, its their proprietary format and has many different versions of it. I don't think any company has the full right to format NTFS which basically comes down that you can not complain to any of the companies or MS about data loss.
My idea with an image is that I can always read it, so in case the WinClone format or write fails I still have all my files (and not just parts of it). Since I am booted the most amount of time on Mac OS X anyway I don't care that a script creates an entire mirror image of my current Windows drive overnight.
I actually have several basic images that I can always restore in case I want to clean up my drive.

Disk Utility - Erasing a hard drive using MS-DOS (FAT)

Hi all,
I have recently purchased a 500GB external hard drive. I have used Disk Utility to format the drive from NTFS to MS-DOS (FAT) so I can use it with Windows PC's as well as Mac's.
My issue is this.
I copied a 1.16GB file over Firewire 800 to test the speed and then deleted it. After deleting the file the info pane still reports that 1.17GB of the drive has been used.
Why is this?
Thanks!
David

Did you remember to empty the trash can? If not, the file is in the hidden directory .Trashes on the Windows drive. You don't reclaim the space until you empty the trash.

Can Lion disk utility dynamically partition a drive?

Can Lion disk utility dynamically partition a drive? I see many posts that Leopard Disk utility can but nothing about Lion.

Yes. I'll post a link to instructions. Be sure to create a full reliable backup before you begin (don't just do the backup, test the backup to be sure it's good), and the only application that should be running until the process is complete is Disk Utility.
http://osxdaily.com/2009/11/20/resize-partitions-in-mac-os-x-with-disk-utility/
Some people have problems resizing partitions because of the hidden Recovery HD partition. It sometimes gets in the way because Disk Utility can move it "up" but cannot move it "down".

Blinking folder with question mark, and disk utility doesnt recognise hard drive, please help!!!

So today i was using my macbook pro and for some reason my CD/DVD drive was causing noise when i put a DVD inside it, and for some reason it did not recognise my DVD. I force ejected it using the restart and clicking, but after that my computer showed a blinking folder and question mark during start up. I restarted my computer to Recovery HD, but instead it took me to internet Recovery HD (i have mountain lion), and so i went to disk utility to repair my disk, but in the left it did not recognise my hard drive. Please help! Im not that experienced in computing!

Sounds like some sort of power issue and now your drive is not working.
You'll have to take this to Apple for repair.
You should read this if you don't have recent backups of your data off the machine.
My computer is not working, is my personal data lost?

Disk utility not partitioning usb thumb drive

Here is the log from disk utility
Dec 15 23:49:38: Disk Utility started.
Unmount of “disk1s1” succeeded
Eject of “LEXAR JUMPDRIVE SECURE Media” succeeded
Preparing to partition disk: “LEXAR JUMPDRIVE SECURE Media”
Partition Scheme: PC Partition Scheme
1 partitions will be created
Partition 1
Name : “Untitled 1”
Size : 121.5 MB
Filesystem : MS-DOS File System
Creating Partition Map
Partition failed for disk LEXAR JUMPDRIVE SECURE Media Input/output error
Partition complete.
error with partition Input/output error
This particular drive has two partitions on it currently, one of which is a DOSFAT_16_SHidden. I have been trying to play around and get this thing to format for a few days now on Linux, windows and my Mac. Should I just give up on it or what?

Master Boot Record. Do this:
Extended Hard Drive Preparation
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to MBR then click on the OK button. Set the format type to MSDOS. Click on the Partition button and wait until the process has completed.

RAID with Disk Utility question

I've setup a RAID array in disk utility for an external SATA NAS that I have. The Silicon Image Si3132 drivers are not working for Snow Leopard (the SATARAID 5 drivers) so I've installed the base non-raid drivers for 10.6.
I'm using Disk Utility to setup the RAID for now until I get updated drivers from SI. Here's my question:
Let's just say that my Mac Pro one day decides to die and I have to rebuild a new OS on the machine. I will then have this external drive where I've configured a software RAID with Mac OS X. Will I be able to rebuild this RAID and recover the data, or will I lose all of the data if the Mac needs to be rebuilt?
The external enclosure has its own controller, but these silicon image drivers do not seem to want to work as they are kernel panicking.
Will I be able to recover the RAID config with disk utility if I rebuild the machine? My thinking is NO

You have four internal hard drives; ability to boot from FW or USB, and I would include TimeMachine and clone (Carbon Copy Cloner or SuperDuper). Some WHS NAS servers also support TimeMachine and SuperDuper, but I would have local backups. Two minimum.
I would not rely on SI or RAID.
And all you need to boot from, and I'd have at least two, is a basic 30GB partition for Mac OS: a working copy of your system as is, a copy of last version installed also, AND, one "emergency" boot partition for disk maintenance and repairs.
Then use NAS as second line of backup for your data, disk images, etc.

Bootable backups - disk utility and which external drives

hi all
(maybe) a simple question
i have been using time machine for my back ups but i am now planning to have a second backup program. i'm looking at using a bootable clone in this regard.
i started looking at super duper and ccc however a few stumbling blokes have just popped up (well at least warning signs that may be of no issue at all - hence this question)
* can ALL external drives be used for bootable backup purposes?
I have a couple of western digital ones - my book essential and my passport.
On the western digital website, it does not have my model numbers listed - does it matter?
Is it a case of any usb connected external drive can be used for intel macs? - i am getting conflicting views on various postings i have seen re this question
second part/question is:
i also understand disk utility can be used for cloning (no updates, just full clones) and as a bootable back up.
if, just for the purposes for having a back up bootable drive, can i set up a clone without too much regard for recloning it (say every 2 months) and if i need to use it, then boot the mac back up with it and then do a full restore using my up to date time machine backups? am i missing something with that method? is that too simple?
feedback much appreciated on these 2 areas
cheers
peter t

Crows2012 wrote:
1) there is no way to make a BOOTABLE clone using disk utility or time machine whatsoever, right? DU will only allow me to make clones and Recovery HD essentially allows me to restore the system (ie software) AFTER booting up?
Correct with respect to TM; all you get is a copy of the Recovery HD.
Disk Utility will make a bootable clone, but there are downsides. First, it can only do a whole copy; unlike a specialized cloning app, it won't copy just what's new or changed, so takes a long time. Second, as I understand it, it won't copy to a smaller volume, even if there's plenty of free space on the internal. For example, if you have a 1 TB internal with only 400 GB on it, DU won't copy it to a 500 GB drive. I may be wrong, but I've seen that posted here by folks who seem to know.
does file b here mean aliases of file b in each backup?
It acts sorta like that, but no.
There's one copy of the actual file, but two hard links to it, one in each folder. The file actually "belongs" to both folders at the same time! The good part of that is, if you delete either backup folder, the other one remains intact. The downside is, how the heck do you count the size of each folder accurately?
that was a great read to understand TM workings and attain some level of piece of mind re my question of incremental v differential backups
It is a bit hard to get your head around! I've been revising and editing that for several years trying to make it clear.
And remember, this only applies to TM as far as I know, at least for consumer-level backup apps.
While it may be possible to boot your computer to an external hard drive, Western Digital does not provide technical support for booting your computer using an external hard drive. If you intend to make a copy of your boot drive, or install your operating system, please use a second internal drive (EIDE or Serial ATA), rather than an external drive.
Yup. WD doesn't exactly have a good reputation for support.
i guess i'll trial CCC or SD and see what happens with the drives that i have re BOOTABILITY
I use CCC myself -- it's a great product with great support.
I downloaded SD a couple of times, but never got around to experimenting with it. Lots of folks swear by it, and say it also has excellent support. To a large degree, it just seems to be a matter of which approach and GUI you prefer, but CCC does allow "archiving" of changed and deleted stuff (differently from TM), and can copy Recovery HDs. I don't think SD does either, but it may have other advantages.
4) and, i think one final question, and a simple/naive one at that.....if my internal hard drive physically collapses then what are the benefits of that bootable clone v not having one?
You can start up from the clone and run normally (but likely a bit more slowly), although you probably won't be as up-to-date as you would after restoring to a new or repaired internal, or an external, from TM. The reason is, running a clone backup, even an incremental one, takes much longer and far more CPU than one of TM's quick incrementals, which it will do hourly if you let it. Few folks using a clone for an OSX drive do it more than once per day, many only once a week.
The downside is, if you run from the clone, you no longer have a backup -- the clone has the only copy of your stuff. That's one reason many folks who use only a cloning app have two (or more) externals with them.
Apart from (obviously) being able to start up immediately to do whatever i wanted to do at the time, after i replace the hard drive (if that was to be the case) are there further expenses or much inconvenience suffered due to not having a bootable drive in getting things all sorted internally on the mac? what is the process in that regard, generally speaking
Just clone the external to the new internal, and you're back in business.
thanks heaps for your time to answer these and previous questions and to build up my understanding of these topics
You're quite welcome.

Disk Utility Question + TM

I recently made a partition on my External USB disk for Time Machine.
I split the 120G HD into a 100G and 20G partition.
I wanted to use the 20G for the Time Machine backup... but apparently it's not going to fit on that as planned lol.
So my question is, If I use the Disk Utility app to join the 2 partitions together into 1 again, will it wipe all the files on the 120G drive clean and then join them or will it keep them there and just join them?
Second question is a quick one, can the TM backup be in the same drive as the 120G with all other files? or does it have to be on its own HD alone?
Thanks in advance! I've learned so much from asking questions on these support forums!

I would backup the HD before repartitioning it, no matter what the partition program says.
Yes, TM can use a partition on an external drive. In fact it can share the partition with other files or folders.
I have partitioned my external drive into a small partition for my Tiger backup and use the other larger partition for TM. On one machine, I also have some old backups on the same partition that TM is using
TM creates its own folder and keeps everything for its own use.
The TM partition should be at least 3x as large as the space your are currently using on your HD.
The first TM backup will copy all your files so you immediately lose that much space. Additional backups by TM only copy changes, so the TM file does not grow very fast after that.

DIsk Utility Question w/ usb drive

Similar Messages

Maybe you are looking for