Disk Utility:Restore backup option

Regarding Kappy's suggestion: (http://discussions.apple.com/thread.jspa?messageID=1327363&#1327363)
To do just a full backup you can use the Restore option of Disk Utility:
1. Open Disk Utility from the Utilities folder.
2. Select the startup volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Drag the startup volume to the Source entry field.
5. Select the backup volume from the leftside list and drag it to the Destination entry field.
6. Check the box to Erase Destination
7. Double-check you got it right, then click on the Restore button.
Will this method create a bootable backup on my firewire drive?
Thanks,
Judy

Yes, it will create a bootable backup.
If your Firewire drive has not been formatted (in other words it's a new drive) then I recommend the following procedure for prepping the drive the first time:
1. Open Disk Utility in the Utilities folder of your Applications folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process will take 30 minutes to an hour or more depending upon the drive size.
If you prep the drive before doing your backup, you can skip Step 6 of the backup instructions.

Similar Messages

Disk Utility: Restore no longer creates bootable images?

So I have a new hard drive for my macbook, and followed the procedure I used last time of using disk utility restore to write the current hard drive image to the new disk, with the new disk in a USB enclosure.
I have done this before, it creates a bootable copy on the new disk, swap the disks away I go.
This time however the new disk is not bootable. When starting it gets to the grey screen with the rotating white pips then dumps back to a black screen with error messages (like its trying to boot of the network).
Swapping back to the old disk boots just fine, so its a problem with the image written to the new disk by disk utility restore not being bootable.
Is this a known issue? I searched the forum with no answers, and am frustrated that its now working as I have run the image twice now at about 5 hours a go for 100GB of data so I am sure its not the copy. Straight after the copy the original disk has about 10 more files than the new disk that's just been imaged, has their been some update to disk utility in the OS X patches that means it no longer copies some key files?
Note that partition on new disk is GUID as it should be, and I don't want to re-install anything from the install media I want to use make disk utility work as designed.

I found two references that may help:
A) At http://everythingapple.blogspot.com/2007/11/use-powerpc-mac-to-create-bootable.h tml it says "PowerPC Macs use the Apple Partition Map, but this poses no problem for Intel Macs, even though Intel Macs use the GUID Partition Table. The reverse is not true however. PowerPC Macs cannot boot disks with a GUID Partition Table."
1. Open up Disk Utility and select your backup drive. Select the "Partition" tab.
2. Go to the "Options" and choose "Apple Partition Map", which is the partition type necessary for PowerPC Macs.
B) Carbon Copy Cloner - Red Dot Warning on main screen: "The target volume will not boot this computer because PowerPC Macintoshes cannot boot from USB devices."
Looks like I'll have to install the 2.5" SATA drive into my PowerPC MacMini to upgrade my system volume from 80gb to 320gb.

Disk Utility emergency backup

MacBook Pro Disk Utility emergency backup?
I'm having some major issues!
My MacBook decided to melt down, and freeze on the gray apple logo screen. After a week of trying safe startup and tons of other tricks, I decided to wipe out my computer and start again.
I really wanted to save some pictures and documents, so I tried using Disk Utility to create a "image" on an external hard drive (I found this tutorial online). I clicked "scan image for restore" as instructed, and after waiting for over an hour I received the error message "unable to scan - internal error"
It's a MacBook Pro running on Mavericks.
Any advice is so appreciated. I would love to resolve this without loosing everything!
Thanks!

How much do you want to save? If the amount isn't large, get an external drive and copy the files from the internal to the external in Finder.
Do you have a backup? If not start one, preferable 2 (or more) on separate external hard drives. Make a backup on each external using Time Machine or a clone program. Once you have the backup, you then will be able to restore desired files to the internal hard drive after you have erased and reformatted.
Clone - Carbon Copy Cloner (Often recommended as it has more features than some others)
Clone – Data Backup
Clone – Deja Vu
Clone - SuperDuper
Clone - Synk
Clone Software – 6 Applications Tested
Commonly Used Backup Methods

My question is about the 'Restore Backup' option on iTunes (Not 'Restore iPhone'). So, if I click on Back Up Now, then 'Restore Backup', would that go through the process of erasing everything on my phone as new then restore whatever iTunes has backed up?

My question is about the 'Restore Backup' option on iTunes (Not 'Restore iPhone'). So, if I click on Back Up Now, then 'Restore Backup', would that go through the process of erasing everything on my phone as new then restore whatever iTunes has backed up?
I do not want this to happen, as with previous experience iTunes doesn't restore a mirror of what the iPhone was when it was backed up as is the case with iCloud backups.
What I am trying to do is, as I've found a method on Youtube, there is an application where I can delete all the multimedia saved in my 'iMessages' so clear up some space. As doing that manually through the phone would take a lifetime. The method is to backup on iTunes, then using the backup created, importing that into the application then deleting the messages through that then restoring the phone using that amended backup.
So back to my question, would restoring through 'Restore Backup' just restore the backup internally or would it flush the entire phone and then restore the backup? And if it does so, what would be lost in the restore?
Thank you all,
Fahmid

iCloud should overwrite your phone with the data stored in your account, preserving your newer data. However, to be sure I would go to Settings>iCloud and turn data syncing to Off before restoring the backup. Then, after restoring the backup, turn the data syncing back to on, and when prompted about Merging with iCloud, choose Don't Merge. This will ensure that the data in your iCloud account overwrites the data on your phone (which is your goal).
Also, you don't sync text messages with iCloud so you will end up losing your more recent messages when they are overwritten by the backup.

Disk Utility Restore - Why error -34 ?

I cloned my 700 G3 iBook's 20GB hard drive to a 30GB ext. HD with Disk Utility>Restore before sending it for repair. Now that I have gotten it back I want to restore the data to the computer's HD. I'm getting error -34 (disk full).
So what is the nature of my problem? Must the destination disk be at least as big as the source disk? (Because it is copying the entire 30GB size.) Or must I empty (erase, reformat) the destination disk? (Because it is adding the data to what is already there.)
Thanks

Michael:
You were right. Thanks. The data would have been added to what was already there.
While I had made back-up clones before, this was the first time I needed to put it back into the computer's hard drive.

Disk Utility Restore

I copied my macbook pro's hard drive to an external drive using disk utility restore. Is it normal for the copy's overall size to be smaller than the original? I thought it would be the same size? The external had no data on it. The original is 273.54 GB and the copy is 271.45 GB... Problem?

May I try to answer your question. When you copy a disk there are a number of files which are not copied such as Trash, swap files and any temporary files that may have on the old disk will not be copied to the new disk. So while the approximately 2 GB of data might at first glance seem like a lot, it is in fact not really that much. I hope that helps you to understand what is happening there.
|___________________
Allan

How to clone disk (Disk Utility Restore, boot: kernel panic)

Hi, I've tried two times to clone my 120GB system disk (old Core2Duo Mac Mini (macmini2,1)) to a 1TB disk attached via USB cradle. Running Snow Leopard 10.6.8 which long time ago was upgraded from Leopard.
Used the Disk Utility "Restore" for cloning. Both times Disk Utility completed without errors. However when I swap the 1TB from USB cradle into mac mini (to internal SATA), the result of even a "Save Mode" boot attempt with Shift/Mod key held is always a kernel panic: "unable to find driver for this platform: \"ACPI\"
As my goal is to clone the existing system to a larger drive, a new install of OS X on the 1TB drive is out of the question. The original 120GB disk boots without problems. But the cloned attempts do not boot.
Judging from the kernel panic it is as if "Restore" doesn't actually restore, but leaves out files. Thus Disk Utility restore in SL is buggy?
Or is my cloning method wrong? Currently I just drag the 120GB system disk (the live running system) to the Source, then drag the 1TB USB disk to Destination, and allow full erase of destination, and do the priviledge elevation to root i.e. the usual password prompt. Does successful cloning need something extra...?

If I understand correctly, what you're doing is copying your 120 GB drive to the 1 TB drive, then swapping the 1 TB drive into your Mac and trying to boot from it, and it fails.
You're doing it wrong, and that's why it fails. A Finder copy (what you're doing) does not respect permissions or symbolic links, which are required to make the system boot. You need to use something that does respect that.
Get your hands on a copy of SuperDuper http://shirtpocket.com/
(free for basic use, but it's well worth the small fee of $27.95 for full access to all features); and/or
Carbon Copy Cloner http://bombich.com
and use one of those to make a bootable clone of your 120 GB drive, then you can boot from it.

Using Disk Utility for backup - target drive must be same size as source?

Hello. I have a 250 GB data drive that I need to back up to an external drive using Disk Utility (restore) so that I can create a RAID-1 set using the 250GB drive. The files take up only 100 GB on the drive.
Does the target external drive need to be 250 GB or just 100+ GB in size for the Disk Utility to work?
Thanks
David

I you want to make a non mirrored drive into a mirrored one you can do that with diskutil. Copying it first is not needed.
man diskutil:
enableRAID mirror|concat device
Convert single filesystem disk or volume into a unpaired mir-
ror RAID set or concat set. Ownership of the affected disk is
required.
repairMirror raidDisk newDisk
Repair a failed mirror. Supply the existing RAID as the raid-
Disk parameter. Supply the new disk as the last parameter of
the request. newDisk and raidDisk are only Device Nodes or
Disk Identifiers. Ownership of the affected disk is required.
The second disk in the mirror set needs to be as big or bigger as the first disk.
Do this booted from another disk or DVD.

Hi, i had backed up my data and then when i restored my phone with the restore backup option, all the photos, music where there but no apps. Al my apps are disappeared. Can you please tell me where are my apps backed up?

Hi, i had backed up my data and then when i restored my phone with the restore backup option, all the photos, music where there but no apps. Al my apps are disappeared. Can you please tell me where are my apps backed up?

Apps (like other synced media like music) are not included in the backup that iTunes makes. Thus, restoring from backup if the apps are not in the iTunes library there are no apps to restore to the iPod.
Redownload the apps into your iTunes library.
Downloading past purchases from the App Store, iBookstore, and iTunes Store
And then restore from backup.
Make sure that in iTunes>Preferences>Devices the box that say "Prevent iPods..." is checked otherwise when you connect the iPod to the computer the previous backup (with your app data) might be overwritten.

Problems transferring Backups to new External HD using Disk Utility restore

I'm having issues using Disk Utility to transfer my backups to a new disk.
I am transferring data from a 250GB external harddrive to a new completely zero'ed 1TB Iomega external harddrive. Both Harddrives are connected via USB. On my old 250GB HD i have a few folders containing about 100GB of data (raw video footage) that are not in the "Backups.backupdb" folder.
I follow the tutorial in item 18 of the FAQS on this forum exactly (except i didnt check erase destination) but i get an error message each time after about 3 minutes:
"Could not restore - Operation not permitted"
This is what my log says:
2009-12-27 17:12:32 +0000: Restore Disk
2009-12-27 17:12:32 +0000: Source: “Darkers HD”
2009-12-27 17:12:32 +0000: Destination: “Untitled”
2009-12-27 17:12:32 +0000: Erase Destination: No
2009-12-27 17:12:32 +0000:
2009-12-27 17:12:32 +0000: Starting Restore…
2009-12-27 17:12:32 +0000: Validating target...
2009-12-27 17:12:32 +0000: done
2009-12-27 17:12:32 +0000: Validating source...
2009-12-27 17:12:32 +0000: done
2009-12-27 17:12:32 +0000: Validating sizes...
2009-12-27 17:12:32 +0000: done
2009-12-27 17:12:32 +0000: Copying
2009-12-27 17:14:01 +0000: could not copy /Volumes/Untitled/Backups.backupdb/Mac/2009-04-15-054708/Macintosh HD/Applications/Adobe Acrobat 7.0 Professional/Acrobat Distiller 7.0.app/Contents/Frameworks/AdobeACE.framework/AdobeACE; Operation not permitted
2009-12-27 17:14:01 +0000: Bom copy exited with error 1
2009-12-27 17:14:01 +0000:
2009-12-27 17:14:01 +0000: Could not restore - Operation not permitted
2009-12-27 17:14:02 +0000: Could not restore - Operation not permitted
2009-12-27 17:14:02 +0000:
I can see from this that it is having issues with a file in the destination:
/Volumes/Untitled/Backups.backupdb/Mac/2009-04-15-054708/Macintosh HD/Applications/Adobe Acrobat 7.0 Professional/Acrobat Distiller 7.0.app/Contents/Frameworks/AdobeACE.framework/AdobeACE
This file is in the first Backup i ever made and all subsequent backups. So i went and looked at this backup through the time machine application and deleted this file from the backup and all subsequent backups. However when i then did the restore again i got the same error message and when i looked at the log it was identical except it had issues with a different "AdobeACE.framework" file from another Adobe CS3 program. I dont want to go through and delete all these types of CS3 files from my backups for obvious reasons, i would much rather understand what the issue is and know whether there is a way round it.
It may well be simply because i have not checked the "erase destination" box before restoring but somehow i doubt this is the issue as the new 1TB HD has already been "zero'ed" as explained earlier.
Any help would be appreciated guys.

check the box to erase destination. the fact that you zeroed it out makes no difference. this is a known issue and checking that box was recommended for a reason.

Moving backups to new drive -- without using disk utility restore

Hello,
I have done some research on this already but I don't believe I've found the solution. I just bought a new media / backup hard drive, and I've moved my itunes library (over 100 GBs) to this drive. Now I have researched how to move the time machine backups to this drive, and know you can't just copy the files.
The instructions I've received tell me to use the disk utility to restore the old time machine backup drive to the new drive, however if I do that won't I lose the iTunes stuff currently on that drive?
Is there an easier way to move that data without me transferring the iTunes back to my laptop, and then restoring through disk utility, and then re-transferring the iTunes again?
thanks,
James

jimumbra wrote:
Hello,
I have done some research on this already but I don't believe I've found the solution. I just bought a new media / backup hard drive, and I've moved my itunes library (over 100 GBs) to this drive. Now I have researched how to move the time machine backups to this drive, and know you can't just copy the files.
The instructions I've received tell me to use the disk utility to restore the old time machine backup drive to the new drive, however if I do that won't I lose the iTunes stuff currently on that drive?
yes, you will. but it is also a VERY bad idea to keep other data on the same partition as the TM backup. first, this data will not be backed up by TM. if you value your itunes data you should have it backed up. also, TM is very buggy and there are too many situations when you need to delete existing TM backups and start from scratch. this should be done by erasing the entire TM partition. you should never delete any TM backups from finder. also, TM will eventually fill up the entire partition with TM backup. it will start bumping up against other data on the partition and you won't be able to put anything else on it.
the upshot is that you should make a separate partition just for TM. don't keep any other data on that partition. you can add a partition to the drive without disturbing your itunes data. type "create new volumes" in disk utility help to see how. however, that's not a good idea IMO as you'll have both the itunes data and the TM backups on the same physical drive. when the drive fails (and it will eventually) you'll loose everything.
Is there an easier way to move that data without me transferring the iTunes back to my laptop, and then restoring through disk utility, and then re-transferring the iTunes again?
thanks,
James

Disk Utility "restore" fails with "no such file or directory"

Some time back, perhaps a LONG time ago, I successfully used Disk Utility's "restore" function to "clone" my Mac OS X partition onto an external disk, before I upgraded the OS on my internal drive.
This weekend I tried to do it again, and failed on every attempt.
My first attempt was on my MacBook. At very end (the progress "bar" was all blue) it died saying that there was an error (2), "no such file or directory". I think the external drive probably isn't GUID, which would make it non-bootable, but I'd still think "restore" itself should work.
Okay, let's try my Power Mac G5, which is where it worked several releases ago. Same thing.
Okay, one more try... Booted into safe mode (in case background activity accounts for the missing file/directory), did the restore again, failed again.
I realize that SuperDuper or Carbon Copy Cloner or other tools may be "better", but since this worked once it seems like it still should.
Any ideas?
Doug

Did you:
A. Repair the hard drive and permissions prior to cloning?
B. Erase the destination drive before cloning?
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now shutdown the computer for a couple of minutes and then restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
How to Clone Using Restore Option of Disk Utility
1. Open Disk Utility from the Utilities folder.
2. Select the backup or destination volume from the left side list.
3. Click on the Erase tab in the DU main window. Set the format type to Mac OS Extended (journaled, if available) and click on the Erase button. This step can be skipped if the destination has already been freshly erased.
4. Click on the Restore tab in the DU main window.
5. Select the backup or destination volume from the left side list and drag it to the Destination entry field.
6. Select the startup or source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
8. Select the destination drive on the Desktop and press COMMAND-I to open the Get Info window. At the bottom in the Ownership and Permissions section be sure the box labeled "Ignore Permissions on this Volume" is unchecked. Verify the settings for Ownership and Permissions as follows: Owner=system with read/write; Group=admin with read/write; Other with read-only. If they are not correct then reset them.
For added precaution you can boot into safe mode before doing the clone.

Disk Utility Restore Function

If I use the restore function in Disk Utility to copy me Macintosh HD drive to an external drive, can I later restore it back and have everything the same?
I am going to reinstall the OS, but am concerned that my last time machine backup may not be up to date and have everything, I can not boot into the HDD, and I know that if I restore the same image I might have the same issues as now with the OS, but that is not my concern at the moment. So, I am copying the Macintosh HD to an external drive using the restore tab and want to make sure that if I do it the other way around, will it be the same and will I have a backup of all my data (particularly my local copies of mail folder) once I restore?
If this does not work, what is the default location for my mail items so I can pull all those and preferably my preferences along with it as I have a lot of rules and other items in mail that I would like to keep.

If I use the restore function in Disk Utility to copy me Macintosh HD drive to an external drive, can I later restore it back and have everything the same?
Yes.
The Restore option of Disk Utility is for cloning one disk volume to another, also known as a full backup. Clones are 100% reversible. Note that if you use the Restore option of Disk Utility it will erase the target volume. If you are using Lion or later you must boot to the Recovery HD in order to clone the main startup volume.
Clone using Restore Option of Disk Utility
1. Open Disk Utility.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Select the destination volume from the left side list and drag
it to the Destination entry field.
5. Select the source volume from the left side list and drag it to
the Source entry field.
6. Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.
To reverse the process simply swap the Source for the Destination and vice-versa.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the arrow button below the icon.

Why is Winclone Needed? Can't Disk Utility Restore a Boot Camp Partition?

Hi. Could we just use Disk Utility to create a backup the Boot Camp Partition running Windows 7 64-bit for example and then just use Disk Utility to restore it if you need to replace your Boot Camp partition?
Why is Winclone the tool use to create an image of Boot Camp partition as well as to restore a Boot Camp partition? Thank you in advance.
Gbu.

Thanks for the reply. How about if you opt for the non compressed image, the DVD/CD Master option (Image Format) when you do the New Image in Disk Utility? Would choosing the DVD/CD Master option be cloning it instead of archiving it? If the images created by Disk Utility are not the exact copy or clone then, it won't be bootable I believe but how come when you create an image of a DVD (to back it up for example) and burn that image, it is bootable which mean it copies it exactly (clone it in effect)?
What does WinClone do or copy exactly that Disk Utility can't?

Disk Utility Restore function very slow

Hi,
I'm using Disk Utility to migrate my Time Machine backup from a USB 2.0 Western Digital My Book 2TB drive (1 TB RAID 1 configuration) to a 1.5 TB Seagate drive in a miniStack (FireWire 800). The WD drive is connected through the USB hub in my old Cinema Display and the mini is connected directly to my Mac mini. I have about 320 GB of data on the WD drive.
I started the Restore procedure in Disk Utility a couple of days ago, and as of now, I still have 5 days and 20 hours left before this finishes--according to DIsk Utility's estimate. Is this normal???? The progress bar is moving as expected, but it's just very very slow. I also noticed when I run Disk Warrior on the WD drive that it can take a few hours to do the analysis and then another few hours to copy the new directory onto the WD drive. Any thoughts?
Thanks in advance,
Paul

Copying TM backups is slow, but that's just ridiculous!
I'd be very suspicious of the WD drive or something, somewhere in the connections to it.
I'd be inclined to just start TM fresh on the new drive. Keep the old one "on the shelf" for a while until you're sure you don't need anything from those backups. You can always browse and restore from the old backups via the +*Browse ...+* option, per #17 in the Frequently Asked Questions *User Tip,* also at the top of the +Time Machine+ forum.

Disk Utility:Restore backup option

Similar Messages

Maybe you are looking for