Disk Utility Restore Problems

Hello All,
The Boot Camp Assistant told me that I had to reformat my hard drive as Mac OS Extended (Journaled) so I:
-Cloned the drive with Carbon Copy Cloner,
-Booted from my external hard drive, and
-Erased my internal disk (Using Disk Utility).
Now, when I try to restore (using Disk Utility) from my external to my internal drive, I get one of two errors:
-RESTORE FAILURE: Lost connection to helper tool.
-RESTORE FAILURE: Could not establish connection with helper tool.
Does anyone have any idea what's going on? I've gone through this whole thing once before for Boot Camp, but the last time didn't yield any crazy errors...

This sounds odd, you normally would only need to create a new partition for BootCamp, rather than erasing the entire drive.
I have no idea what is going on to produce those error messages, nor can I find much information with Google - which is unusual.
So the following is based on my best guess.
When you erased the volume, did you set the partition table to be GUID? This is required for Intel Macs. It might be worth repartitioning the startup disk, and making sure that you have the correct options all the way through for your OS X partition:
HFS+ (Journaled)
GUID
(No OS 9 drivers)
Once this is finished, exit Disk Utility.
To restore your clone, use Carbon Copy Cloner from your external drive, and simply back the external drive onto your newly formatted internal drive.
Once CCC has finished, then you can run Boot Camp - and follow [these instructions|http://manuals.info.apple.com/en/BootCampInstall-Setup.pdf]. You don't need to erase your entire Mac Hard drive, the Boot Camp Assistant will create a new partition for Windows.

Similar Messages

  • Disk utility restore problem: cannot drag internal hdd to destination field

    I'm currently trying to restore a time machine backup after my boot ssd recently failed, but am having trouble restoring the backup to my secondary internal drive in the optical bay. My set up isthe following:
    Failed ssd in primary hdd  bay of MacBook Pro (mid 2010)
    1tb secondary  hdd in optical drive bay with time machine backup of failed ssd.
    2tb external drive
    The following is what I have done so far...
    1. Booted into the secondary internal drive and restored the time machine backup onto the external USB drive.
    2. Booted from the restored backup on the USB drive (this now looks like my old computer again but is very slow as its USB 2.0)
    3. Partitioned the secondary internal drive in the optical bay.
    4. Now I want to copy the restored volume on my USB drive to the secondary internal drive in the optical bay.
    When I open disk utility's restore function I can put my original volum in the source field, however, it will not let me put either partition of my internal drive in the destination field. It has no problem putting other partitions from the USB drive in the destination field - just will not allow anything from the internal drive. Why is this?
    I'm thinking it could possibly be because it is in the optical drive bay and apple has prevented copying full volumes into this bay, but then again surely this would be needed when burning DVDs at some stage. Any ideas? Many thanks in advance for any help.

    I managed to complete the restore and you may have been right - I booted from the internal hdd then restored the time machine backup stored on the usb drive to a different partition on the internal hd. Seemed to work fine now running of the hd in the optical drive bay but has still crashed a couple of times which is pretty odd. Perhaps the failed ssd in the main drive bay is still causing a bit of a nuisance (it registers for the first 3 minutes after booting up then disappears). Also didnt notice the responsiveness too much when upgrading from hd to ssd, but going the other way back to hd - can definitely now tell the difference. Painfully slow at times! I need to get that ssd replaced I think.  Anyway thanks for your advice!

  • Disk Utility: Restore no longer creates bootable images?

    So I have a new hard drive for my macbook, and followed the procedure I used last time of using disk utility restore to write the current hard drive image to the new disk, with the new disk in a USB enclosure.
    I have done this before, it creates a bootable copy on the new disk, swap the disks away I go.
    This time however the new disk is not bootable. When starting it gets to the grey screen with the rotating white pips then dumps back to a black screen with error messages (like its trying to boot of the network).
    Swapping back to the old disk boots just fine, so its a problem with the image written to the new disk by disk utility restore not being bootable.
    Is this a known issue? I searched the forum with no answers, and am frustrated that its now working as I have run the image twice now at about 5 hours a go for 100GB of data so I am sure its not the copy. Straight after the copy the original disk has about 10 more files than the new disk that's just been imaged, has their been some update to disk utility in the OS X patches that means it no longer copies some key files?
    Note that partition on new disk is GUID as it should be, and I don't want to re-install anything from the install media I want to use make disk utility work as designed.

    I found two references that may help:
    A) At http://everythingapple.blogspot.com/2007/11/use-powerpc-mac-to-create-bootable.h tml it says "PowerPC Macs use the Apple Partition Map, but this poses no problem for Intel Macs, even though Intel Macs use the GUID Partition Table. The reverse is not true however. PowerPC Macs cannot boot disks with a GUID Partition Table."
    1. Open up Disk Utility and select your backup drive. Select the "Partition" tab.
    2. Go to the "Options" and choose "Apple Partition Map", which is the partition type necessary for PowerPC Macs.
    B) Carbon Copy Cloner - Red Dot Warning on main screen: "The target volume will not boot this computer because PowerPC Macintoshes cannot boot from USB devices."
    Looks like I'll have to install the 2.5" SATA drive into my PowerPC MacMini to upgrade my system volume from 80gb to 320gb.

  • Disk Utility Restore - Why error -34 ?

    I cloned my 700 G3 iBook's 20GB hard drive to a 30GB ext. HD with Disk Utility>Restore before sending it for repair. Now that I have gotten it back I want to restore the data to the computer's HD. I'm getting error -34 (disk full).
    So what is the nature of my problem? Must the destination disk be at least as big as the source disk? (Because it is copying the entire 30GB size.) Or must I empty (erase, reformat) the destination disk? (Because it is adding the data to what is already there.)
    Thanks

    Michael:
    You were right. Thanks. The data would have been added to what was already there.
    While I had made back-up clones before, this was the first time I needed to put it back into the computer's hard drive.

  • Disk Utility Restore

    I copied my macbook pro's hard drive to an external drive using disk utility restore. Is it normal for the copy's overall size to be smaller than the original? I thought it would be the same size? The external had no data on it. The original is 273.54 GB and the copy is 271.45 GB... Problem?

    May I try to answer your question. When you copy a disk there are a number of files which are not copied such as Trash, swap files and any temporary files that may have on the old disk will not be copied to the new disk. So while the approximately 2 GB of data might at first glance seem like a lot, it is in fact not really that much. I hope that helps you to understand what is happening there.
    |___________________
    Allan

  • How to clone disk (Disk Utility Restore, boot: kernel panic)

    Hi, I've tried two times to clone my 120GB system disk (old Core2Duo Mac Mini (macmini2,1)) to a 1TB disk attached via USB cradle. Running Snow Leopard 10.6.8 which long time ago was upgraded from Leopard.
    Used the Disk Utility "Restore" for cloning. Both times Disk Utility completed without errors. However when I swap the 1TB from USB cradle into mac mini (to internal SATA), the result of even a "Save Mode" boot attempt with Shift/Mod key held is always a kernel panic: "unable to find driver for this platform: \"ACPI\"
    As my goal is to clone the existing system to a larger drive, a new install of OS X on the 1TB drive is out of the question. The original 120GB disk boots without problems. But the cloned attempts do not boot.
    Judging from the kernel panic it is as if "Restore" doesn't actually restore, but leaves out files. Thus Disk Utility restore in SL is buggy?
    Or is my cloning method wrong? Currently I just drag the 120GB system disk (the live running system) to the Source, then drag the 1TB USB disk to Destination, and allow full erase of destination, and do the priviledge elevation to root i.e. the usual password prompt. Does successful cloning need something extra...?

    If I understand correctly, what you're doing is copying your 120 GB drive to the 1 TB drive, then swapping the 1 TB drive into your Mac and trying to boot from it, and it fails.
    You're doing it wrong, and that's why it fails. A Finder copy (what you're doing) does not respect permissions or symbolic links, which are required to make the system boot. You need to use something that does respect that.
    Get your hands on a copy of SuperDuper http://shirtpocket.com/
    (free for basic use, but it's well worth the small fee of $27.95 for full access to all features); and/or
    Carbon Copy Cloner http://bombich.com
    and use one of those to make a bootable clone of your 120 GB drive, then you can boot from it.

  • Problems transferring Backups to new External HD using Disk Utility restore

    I'm having issues using Disk Utility to transfer my backups to a new disk.
    I am transferring data from a 250GB external harddrive to a new completely zero'ed 1TB Iomega external harddrive. Both Harddrives are connected via USB. On my old 250GB HD i have a few folders containing about 100GB of data (raw video footage) that are not in the "Backups.backupdb" folder.
    I follow the tutorial in item 18 of the FAQS on this forum exactly (except i didnt check erase destination) but i get an error message each time after about 3 minutes:
    "Could not restore - Operation not permitted"
    This is what my log says:
    2009-12-27 17:12:32 +0000: Restore Disk
    2009-12-27 17:12:32 +0000: Source: “Darkers HD”
    2009-12-27 17:12:32 +0000: Destination: “Untitled”
    2009-12-27 17:12:32 +0000: Erase Destination: No
    2009-12-27 17:12:32 +0000:
    2009-12-27 17:12:32 +0000: Starting Restore…
    2009-12-27 17:12:32 +0000: Validating target...
    2009-12-27 17:12:32 +0000: done
    2009-12-27 17:12:32 +0000: Validating source...
    2009-12-27 17:12:32 +0000: done
    2009-12-27 17:12:32 +0000: Validating sizes...
    2009-12-27 17:12:32 +0000: done
    2009-12-27 17:12:32 +0000: Copying
    2009-12-27 17:14:01 +0000: could not copy /Volumes/Untitled/Backups.backupdb/Mac/2009-04-15-054708/Macintosh HD/Applications/Adobe Acrobat 7.0 Professional/Acrobat Distiller 7.0.app/Contents/Frameworks/AdobeACE.framework/AdobeACE; Operation not permitted
    2009-12-27 17:14:01 +0000: Bom copy exited with error 1
    2009-12-27 17:14:01 +0000:
    2009-12-27 17:14:01 +0000: Could not restore - Operation not permitted
    2009-12-27 17:14:02 +0000: Could not restore - Operation not permitted
    2009-12-27 17:14:02 +0000:
    I can see from this that it is having issues with a file in the destination:
    /Volumes/Untitled/Backups.backupdb/Mac/2009-04-15-054708/Macintosh HD/Applications/Adobe Acrobat 7.0 Professional/Acrobat Distiller 7.0.app/Contents/Frameworks/AdobeACE.framework/AdobeACE
    This file is in the first Backup i ever made and all subsequent backups. So i went and looked at this backup through the time machine application and deleted this file from the backup and all subsequent backups. However when i then did the restore again i got the same error message and when i looked at the log it was identical except it had issues with a different "AdobeACE.framework" file from another Adobe CS3 program. I dont want to go through and delete all these types of CS3 files from my backups for obvious reasons, i would much rather understand what the issue is and know whether there is a way round it.
    It may well be simply because i have not checked the "erase destination" box before restoring but somehow i doubt this is the issue as the new 1TB HD has already been "zero'ed" as explained earlier.
    Any help would be appreciated guys.

    check the box to erase destination. the fact that you zeroed it out makes no difference. this is a known issue and checking that box was recommended for a reason.

  • Disk Utility - Restoring a previous image

    Since I first bought my Mac Mini (February of this year) I've been using the disk utility to make occasional backups (disk images) of my partitions, in case I ever need to restore a whole partition (or create a clone of an existing partition - for example, so that I could test some new software that might cause problems). I've never actually needed to restore a partition (or produce a clone from one of the backup images) until today. However, when I first bought my Mac I did test this feature and it seemed to work.
    A few days ago I realised that I'd soon need to clone a partition so I backed up my Mac HFS partition which is about 90GB in size (my internal disk being 500GB). I then used Coriolis iPartition to create a new, empty Mac HFS partition of the same size, then tried to use Apple's Disk Utility to restore the newly created disk image. However when I came to try the restore, I got an error saying that the image would first need to be "image scanned" before being usable. I then tried an old image that I created when I first bought the Mac and currently, that one seems to be restoring.
    AFAIK I've used the same method to create both images so why did the old one work when the new one didn't??
    Message was edited by: johne53

    Hmmm.... I've just realised that none of the images I've created recently will verify properly. They all get to the end of the first stage (block checksum of partition #1) and then fail with "internal error". The only one which passes the verification process is the very first one which I created a long time ago. That one seems to complete two stages of block verifications (for 2 partitions) then one "file checksum".
    If I try to select a disk image and use "Open Disk Image" (from the right-click menu) I get an error saying "Unable to attach [image-name].dmg. No mountable file systems." This happens with every disk image I've created, apart from the very first one.

  • Disk utility Restore and Back up

    when using Disk utility and dragging my source internal HD to the source window and then dragging my external HD to the destination window then clicking on restore.
    After this completes can I then boot from the external HD? I have been using DeJuVu with no problems on a lacie ext HD. i just purchased an OWC Mercury elite and did a DeJuVu back up, but the OWC wont boot.
    It mounts and shows up on the restart in sytem preferences. I contacted OWC and they recommended doing another back up. They also told me i could do the restore from disk utilities and would be able to boot from the ext.
    I am now doing a restore on the imac but still wondering if this will work, if so I could do my cloning of the HD with out using DeJuVu. the only thing I would lose is the ability to do scheduling.
    Thank You
    Dick

    I never had any problem backing up a clone using DeJuVu. I always backed up to external sata HD's and a Lacie firewire ext. Also when I used CCC this time it worked fine.
    When I bought the OWC Mercury Elite is when I had a problem. After spending a day with there tech dept with no success. I came to the conclusion that only one HD could be booted from there ext 2 drive enclosure. I contacted the the next morning and talked to there senior tech and he confirmed that the enclosure when split using two drives independently that only one was bootable.
    I am not sure why you can't get a complete bootable clone. What are the drives and what are you trying to clone to. Ext, internal or your single drive which you have partitioned?
    I feel if your cloning you should always do it on a separate drive.
    My methods are I never partition and never fill my operating system over half of the drive capacity.
    Dcik

  • Use Disk Utility "Restore" to clone system Drive

    I have always recommended that everyone use the Restore function under Disk Utility to clone their drive before each update, just incase one needs to quickly fall back to a working release.
    Well I decided to test my cloned drive, and to make a long story short, be sure that you boot from a different drive than the one you want to clone. A clone made from the current/active startup drive does NOT boot (well mine would not boot).
    So, boot from a backup drive/partition, one that is Panther works best as you do not have to worry about spotlight, or dashboard, or any of the other "cool" Tiger auto running programs getting in the way, then go into Disk Utility, and Restore, and clone your main startup drive. It creates a drive that will actually boot.
    Maybe this was obvious to everyone, but I had been making my backup clone drive for the past year right from my main active startup drive. I never received an error that indicated there would be any problem with the cloned drive. Thank goodness that I NEVER had to use the backup.
    Now I sleep peacefully at night, knowing I have a bootable replacement startup drive ready to go at a moments notice.
    bob

    CCC has worked fine with 10.3.x but I have been having some issues getting the backup of 10.4 to be recognized.
    I don't know if it is the disk (it's on a partition of a sloooow lacie) or the nature of the clone. In either case, it takes a couple of tries before the drive is found as a boot drive and it is a pain....
    After a hugely painful and very, very expensive experience with failed backups (we lost the entire office's electronic records going back for 3 years), I have gotten in the habit of booting off the backups once every few weeks to verify they work.
    In the immortal words of journalist and fiction writer Damon Runyon, "Trust, but verify."
    Cheers,
    x
    Do your part in supporting your fellow users. If a response has been Helpful to you or Solved your question, please mark it as such as an aid to other lost souls on the forum.
    Also, don't forget to mark the thread Answered when you get enough information to close the thread.

  • Disk Utility repair problem

    I am running Yosemite on an mid-2011 iMac. I ran the Disk Utility and got this message after running Verify:
    << Error: This disk needs to be repaired using the Recovery HD. Restart your computer, holding down the Command key and the R key until you see the Apple logo. When the OS X Utilities window appears, choose Disk Utility. >>
    I followed the instructions, but when the Utilities window appeared, I was unable to start the Disk Utility from the menu. There was a dialog saying that OS X had not been successfully installed.
    What could be causing this problem?

    The startup drive may be failing, or there is some other internal hardware fault.
    Back up all data on the drive immediately if you don't already have a current backup. There are ways to back up a computer that isn't fully functional—ask if you need guidance.
    Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.
    If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
    Keeping your confidential data secure during hardware repair
    Apple also recommends that you deauthorize a device in the iTunes Store before having it serviced.
    *An SSD doesn't need to be zeroed.

  • Disk utility - restoring a .cdr question

    i hate the format of the apple discussion forums now.
    not sure if this is the proper place since there is no "community" to discuss Disk Utility and the "restore" function, which is not specific to snow leopard, but since i'm still running 10.6.8, i'll go ahead an post this here.
    in the past, i've successfuly restored disk images onto dedicated hard drive partitions.  i do this for a variety of reasons, namely to have working backups of certain DVD's, such as my install DVD's when internal super drive stopped functioning.
    however, i just tried this following what i think are the proper instructions, but now i can't restore the disk image and can't find the answer anywhere online.
    basically:
    1)  i'm going into disk utility, hooking up an external dvd drive and copying a playable DVD of some live music i purchased
    2)  i'm choosing "create new image" and under compression, choosing "dvd/cd master"
    the problem is that the resulting file comes out as ".cdr" and not .dmg.  i haven't tried it using some type of compression, but for some reason Disk Utility won't let me "restore" from a ".cdr" file, only a .dmg or .iso.
    i've tried changing the extensions.  i've tried converting (within disk utility) the .cdr to .dmg, and i get the same "invalid argument" error as always.
    the only thing i haven't done is tried making another .dmg using some type of compression, or read-only, read-write format.
    it would seem to me that choosing cd/dvd master is the proper category.
    does anyone know why a .cdr will mount, but cannot be used for restore???  and why making a disk image of a disk i own defaults to .cdr and not .dmg?
    thanks.
    666

    Hmmm.... I've just realised that none of the images I've created recently will verify properly. They all get to the end of the first stage (block checksum of partition #1) and then fail with "internal error". The only one which passes the verification process is the very first one which I created a long time ago. That one seems to complete two stages of block verifications (for 2 partitions) then one "file checksum".
    If I try to select a disk image and use "Open Disk Image" (from the right-click menu) I get an error saying "Unable to attach [image-name].dmg. No mountable file systems." This happens with every disk image I've created, apart from the very first one.

  • Disk Utility - Restore can not unmount target drive

    Just got a brand new MacBook Pro with Lion. As usual there are "issues"..
    I wanted to move my old TimeMachine backup (250 GB) to a larger Firewire drive (500 GB) and found a lot of instructions on that.. Problem is they don't work on Lion. (Both are Iomega drives with Firewire)
    The instructions suggest that using Disk Utility to "restore" the new drive from the old will work but I always get the Error "Can not unmount target drive..." and I can see that the source drive is unmounted but not the target.  I did all of the "First Aid" stuff to both drives.. (and the target drive was turned into a MacOS partition and verified..)
    I then tried the exact same process on my old MacBook Pro (Leopard) and everything worked as expected..
    Was there another way to do this in Lion.. or is this broken..???
    Thanks for any feedback..
    John..

    Is the new drive prepped?
    Drive Preparation
    1. If you are preparing an external or a non-startup drive, then open Disk Utility in your Utilities folder.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    In Disk Utility you clone as follows:
    Clone using Restore Option of Disk Utility
    Open Disk Utility from the Utilities folder.
    Select the destination volume from the left side list.
    Click on the Restore tab in the DU main window.
    Check the box labeled Erase destination.
    Select the destination volume from the left side list and drag it to the Destination entry field.
    Select the source volume from the left side list and drag it to the Source entry field.
    Double-check you got it right, then click on the Restore button.
    Destination means the new backup drive. Source means the old backup drive.
    If you still have a problem then boot into the Recovery HD:
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Choose Disk Utility from the main menu then click on the Continue button.

  • Disk Utility restoring a disk, What do I do?

    Hi,
    I had a problem with my Macbook Pro being stuck in a grey screen at start up. I've worked through available info online and I have now run my install disk. Under Disk Utility / First Aid. No problems are showing on my Mac OS X start up volume. How do I move forward now. If I restore my volume, will I wipe files that have not been backed up to Time Machine?

    Pinkafeld wrote:
    Hi,
    I had a problem with my Macbook Pro being stuck in a grey screen at start up. I've worked through available info online and I have now run my install disk. Under Disk Utility / First Aid. No problems are showing on my Mac OS X start up volume. How do I move forward now. If I restore my volume, will I wipe files that have not been backed up to Time Machine?
    YUP!
    If none of the grey screen instructions are working, run the Apple Hardware Test to rule out hardware problems.  Post the results.
    Another  possibility is that your HD is dying. 
    Failing Hard Drive Sounds
    How to Tell When Your Hard Drive is Going to Fail
    =====================  http://www.macworld.com/article/2030700/mac-troubleshooting-be-prepared-for-hard -drive-failure.html
    Be prepared for hard-drive failure

  • Disk Utility Restore Process Input/Output Error

    <Image Edited by Host>
    My niece's MBP specs above. If I posted a picture of this poor machine, there'd be a lynch mob of passionate Apple fans arrive at my door wanting a public hanging...It's been dropped no less than a dozen times. (The ethernet port is stretched out of shape so badly that a standard plug will no longer fit the port!!!).
    Among other physical injuries, the screen won't present an image (just flickers white lines on black background, hinge has partially detatched, suspect the ribbon that transmits the display signal has been compromised). A visit to the Apple store tells us (by plugging into a cinema display via TB) that the hard drive is still in tact and data is salvageable. Keyboard and trackpad both work fine (surprisingly).
    Long story short, she's acquired a new MBA, been read the riot act about looking after it, and I have the unenviable task of salvaging her data, approx 275Gig.
    My objective is to obtain:
    1. A full copy of the data (existing file structures) - Complete
    2. A bootable disk image of the MBP - Incomplete and troublesome
    I have at my disposal:
    Mid 2011 27' iMac (Intel i7) on Mav
    MBPr13 (third host if needed) on Mav
    A home ethernet network with enterprise grade switching
    A Lacie 5BigPro 10TB NAS
    A couple of 1 & 2 TB Toshiba external drives, and
    Enough network adapters, USB cables and thunderbolt cables to suffice. Admin priviliges all round. All disk permissions repaired.
    Current connection config is the MBP thunderbolted to the iMac. I can use TDM (if I need to interface with the MBP using the iMac display) or can boot in Target Disk Mode if I want to see the MBP disk image on the iMac.
    Regarding Objective2: A bootable disk image of the MBP, I first tried to use the Restore function in Disk Utility, but that only works when booting the host in Recovery mode, whcih doesn't support TDM, so I'm flying blind...
    Next try, I booted the MBP in Target Disk Mode, which allowed me to use the Restore process from the iMac's Disk Utility, select the MBP HD, and target an external drive (one of the Toshiba's) plugged in to the iMac via USB.
    I've now tried this Restore 3 times, each time getting the following I/O error (at about 45 munites in to a projected 4 hour process):
    Any thoughts on root cause?
    And (given my screen/display limitations) am I missing a far simpler option?
    Cheers, Sla

    If that were the case you would not get in/out errors. These errors occur because the drive is no longer able to transfer data which is a hardware failure.
    If you want to post an image to the forum then you need to open the message editor and click on the Camera icon you will find in the editor's toolbar. Then select the image you wish to post and click on the Insert button.
    You can try running the Apple Hardware Test to see if it reveals anything.
    Using Apple Hardware Test
    Intel-based Macs- Using Apple Hardware Test

Maybe you are looking for