Disk Utility to repair Disk???

ok, SO I have attempted installing Windows Home Vista Basic. Every time I try to I click partition It clicks but it takes about 5 minutes and I get this Message " Verification failed. This disk could not partitioned. then below it says " Use Disk Utility to repair this disk ". So i go to Disk utility and verify the disk and it will get about 1/2 through at about 10 minutes. Then I get another error message saying my disk could not be verified. I have no clue what to do now! It also tells me that Macintosh HD needs to be repaired but the repair button isn't able to be clicked Please help!

Restart the computer with the Shift key held down; doing this quietly runs the repair function.
(43886)

Similar Messages

  • Using Disk Utility's Repair Disk Command with Time Machine

    I'm trying to figure out whether or not I can use Disk Utility's Repair Disk command on a Time Machine volume. Time machine is taking a very long time to finalize its backups. I don't know if there are directory issues that need to be addressed or if it's due to the very large size of the directory. I've been using Time Machine on this computer since last January and the Time Machine directory takes up over 7 GB of disk space! It's so large that DiskWarrior will no longer work on that volume. DiskWarrior has a limit of 4 GB. I can't be the only one in this situation. I don't want my Time Machine backup to get hopelessly corrupted and then have to start agin. I'm trying to be proactive about correcting any issues before they become serious.

    Jon
    So far I haven't a clue as to what is wrong, so until a person stumbles in here with one, maybe you could amuse me with as to how you figured how much space the "catalog" is taking. I surely see nothing funny going on my system, although my Time Machine volume is smaller than yours and I might not be looking in all the right places.

  • After using Disk Utility's Repair Disk Permissions, can't login when restart my macbook pro10.6.8 Snow Leopard

    Here's the log of my Macbook Pro, as I'm using a chinese version,
    so log can only appear as below.
    Reason I try to use Disk Utility's Repair is because the finder got not respond so ofter, it happen after my unscuessful power loss issues happen at home, before I doing Disk Utility's Repair I have try to build another admin account and guest user to reslove the ifnder not respond problem and it fix......
    I'm sure problem was cause after using Disk Utility's Repair tool..
    Now I can turn on by using Safy mode, just can't plugin USB =(
    Anyone can help for solving, thanks a lot
    Disk Utility's Repair log
    磁碟工具程式 as Disk Utility's Repair
    2011-05-28 14:58:27 +1000: “磁碟工具程式”已啟動。
    2011-05-28 14:58:45 +1000: “磁碟工具程式”已啟動。
    2011-06-08 04:45:07 +1000: “磁碟工具程式”已啟動。
    2011-07-07 01:21:13 +1000: “磁碟工具程式”已啟動。
    2012-07-18 17:12:15 +1000: “磁碟工具程式”已啟動。
    2012-07-18 17:12:34 +1000: “磁碟工具程式”已啟動。
    2012-07-18 17:13:02 +1000: 正在修復“Macintosh HD”的權限
    2012-07-18 17:13:10 +1000: “Library”上的權限不同，應該為 drwxrwxr-t ，它們為 drwxrwxr-x 。
    2012-07-18 17:13:10 +1000: 已修復“Library”。
    2012-07-18 17:13:58 +1000: “System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/zh_TW.lproj/RemoteDesktopMenu.nib” 上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
    2012-07-18 17:13:58 +1000: 已修復“System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/zh_TW.lproj/RemoteDesktopMenu.nib” 。
    2012-07-18 17:13:58 +1000: “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/zh_TW.lproj/UIAgent.nib”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
    2012-07-18 17:13:58 +1000: 已修復“System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/ Remote Desktop Message.app/Contents/Resources/zh_TW.lproj/UIAgent.nib”。
    2012-07-18 17:13:58 +1000: “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/zh_TW.lproj/MainMenu.nib”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
    2012-07-18 17:13:58 +1000: 已修復“System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents /Support/LockScreen.app/Contents/Resources/zh_TW.lproj/MainMenu.nib”。
    2012-07-18 17:13:58 +1000: “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/zh_TW.lproj/MainMenu.nib”上的權限不 同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
    2012-07-18 17:13:58 +1000: 已修復“System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents /Support/LockScreenLeopard386.app/Contents/Resources/zh_TW.lproj/MainMenu.nib”。
    2012-07-18 17:14:05 +1000: “System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/zh_CN.lproj/RemoteDesktopMenu.nib” 上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
    2012-07-18 17:14:05 +1000: 已修復“System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/zh_CN.lproj/RemoteDesktopMenu.nib” 。
    2012-07-18 17:14:06 +1000: “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/zh_CN.lproj/UIAgent.nib”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
    2012-07-18 17:14:06 +1000: 已修復“System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/ Remote Desktop Message.app/Contents/Resources/zh_CN.lproj/UIAgent.nib”。
    2012-07-18 17:14:06 +1000: “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/zh_CN.lproj/MainMenu.nib”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
    2012-07-18 17:14:06 +1000: 已修復“System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents /Support/LockScreen.app/Contents/Resources/zh_CN.lproj/MainMenu.nib”。
    2012-07-18 17:14:06 +1000: “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/zh_CN.lproj/MainMenu.nib”上的權限不 同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
    2012-07-18 17:14:06 +1000: 已修復“System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents /Support/LockScreenLeopard386.app/Contents/Resources/zh_CN.lproj/MainMenu.nib”。
    2012-07-18 17:14:40 +1000: “System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/ko.lproj/RemoteDesktopMenu.nib”上的權 限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
    2012-07-18 17:14:40 +1000: 已修復“System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/ko.lproj/RemoteDesktopMenu.nib”。
    2012-07-18 17:14:40 +1000: “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/ko.lproj/UIAgent.nib”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
    2012-07-18 17:14:40 +1000: 已修復“System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/ Remote Desktop Message.app/Contents/Resources/ko.lproj/UIAgent.nib”。
    2012-07-18 17:14:40 +1000: “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/ko.lproj/MainMenu.nib”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
    2012-07-18 17:14:40 +1000: 已修復“System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents /Support/LockScreen.app/Contents/Resources/ko.lproj/MainMenu.nib”。
    2012-07-18 17:14:40 +1000: “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/ko.lproj/MainMenu.nib”上的權限不同，應 該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
    2012-07-18 17:14:40 +1000: 已修復“System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents /Support/LockScreenLeopard386.app/Contents/Resources/ko.lproj/MainMenu.nib”。
    2012-07-18 17:15:02 +1000: “System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/Dutch.lproj/RemoteDesktopMenu.nib” 上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
    2012-07-18 17:15:03 +1000: 已修復“System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/Dutch.lproj/RemoteDesktopMenu.nib” 。
    2012-07-18 17:15:03 +1000: “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/Dutch.lproj/UIAgent.nib”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
    2012-07-18 17:15:03 +1000: 已修復“System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/ Remote Desktop Message.app/Contents/Resources/Dutch.lproj/UIAgent.nib”。
    2012-07-18 17:15:03 +1000: “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/Dutch.lproj/MainMenu.nib”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
    2012-07-18 17:15:03 +1000: 已修復“System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents /Support/LockScreen.app/Contents/Resources/Dutch.lproj/MainMenu.nib”。
    2012-07-18 17:15:03 +1000: “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/Dutch.lproj/MainMenu.nib”上的權限不 同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
    2012-07-18 17:15:03 +1000: 已修復“System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents /Support/LockScreenLeopard386.app/Contents/Resources/Dutch.lproj/MainMenu.nib”。
    2012-07-18 17:15:10 +1000: “System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/Italian.lproj/RemoteDesktopMenu.ni b”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
    2012-07-18 17:15:10 +1000: 已修復“System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/Italian.lproj/RemoteDesktopMenu.ni b”。
    2012-07-18 17:15:10 +1000: “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/Italian.lproj/UIAgent.nib”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
    2012-07-18 17:15:10 +1000: 已修復“System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/ Remote Desktop Message.app/Contents/Resources/Italian.lproj/UIAgent.nib”。
    2012-07-18 17:15:10 +1000: “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/Italian.lproj/MainMenu.nib”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
    2012-07-18 17:15:10 +1000: 已修復“System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents /Support/LockScreen.app/Contents/Resources/Italian.lproj/MainMenu.nib”。
    2012-07-18 17:15:10 +1000: “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/Italian.lproj/MainMenu.nib”上的權 限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
    2012-07-18 17:15:10 +1000: 已修復“System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents /Support/LockScreenLeopard386.app/Contents/Resources/Italian.lproj/MainMenu.nib” 。
    2012-07-18 17:15:20 +1000: “System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/Spanish.lproj/RemoteDesktopMenu.ni b”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
    2012-07-18 17:15:20 +1000: 已修復“System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/Spanish.lproj/RemoteDesktopMenu.ni b”。
    2012-07-18 17:15:20 +1000: “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/Spanish.lproj/UIAgent.nib”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
    2012-07-18 17:15:20 +1000: 已修復“System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/ Remote Desktop Message.app/Contents/Resources/Spanish.lproj/UIAgent.nib”。
    2012-07-18 17:15:20 +1000: “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/Spanish.lproj/MainMenu.nib”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
    2012-07-18 17:15:20 +1000: 已修復“System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents /Support/LockScreen.app/Contents/Resources/Spanish.lproj/MainMenu.nib”。
    2012-07-18 17:15:20 +1000: “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/Spanish.lproj/MainMenu.nib”上的權 限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
    2012-07-18 17:15:20 +1000: 已修復“System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents /Support/LockScreenLeopard386.app/Contents/Resources/Spanish.lproj/MainMenu.nib” 。
    2012-07-18 17:15:28 +1000: “System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/French.lproj/RemoteDesktopMenu.nib ”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
    2012-07-18 17:15:28 +1000: 已修復“System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/French.lproj/RemoteDesktopMenu.nib ”。
    2012-07-18 17:15:28 +1000: “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/French.lproj/UIAgent.nib”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
    2012-07-18 17:15:28 +1000: 已修復“System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/ Remote Desktop Message.app/Contents/Resources/French.lproj/UIAgent.nib”。
    2012-07-18 17:15:28 +1000: “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/French.lproj/MainMenu.nib”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
    2012-07-18 17:15:28 +1000: 已修復“System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents /Support/LockScreen.app/Contents/Resources/French.lproj/MainMenu.nib”。
    2012-07-18 17:15:28 +1000: “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/French.lproj/MainMenu.nib”上的權限 不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
    2012-07-18 17:15:28 +1000: 已修復“System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents /Support/LockScreenLeopard386.app/Contents/Resources/French.lproj/MainMenu.nib”。
    2012-07-18 17:15:36 +1000: “System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/German.lproj/RemoteDesktopMenu.nib ”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
    2012-07-18 17:15:36 +1000: 已修復“System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/German.lproj/RemoteDesktopMenu.nib ”。
    2012-07-18 17:15:36 +1000: “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/German.lproj/UIAgent.nib”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
    2012-07-18 17:15:36 +1000: 已修復“System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/ Remote Desktop Message.app/Contents/Resources/German.lproj/UIAgent.nib”。
    2012-07-18 17:15:36 +1000: “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/German.lproj/MainMenu.nib”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
    2012-07-18 17:15:36 +1000: 已修復“System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents /Support/LockScreen.app/Contents/Resources/German.lproj/MainMenu.nib”。
    2012-07-18 17:15:36 +1000: “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/German.lproj/MainMenu.nib”上的權限 不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
    2012-07-18 17:15:36 +1000: 已修復“System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents /Support/LockScreenLeopard386.app/Contents/Resources/German.lproj/MainMenu.nib”。
    2012-07-18 17:15:44 +1000: “System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/Japanese.lproj/RemoteDesktopMenu.n ib”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
    2012-07-18 17:15:44 +1000: 已修復“System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/Japanese.lproj/RemoteDesktopMenu.n ib”。
    2012-07-18 17:15:45 +1000: “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/Japanese.lproj/UIAgent.nib”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
    2012-07-18 17:15:45 +1000: 已修復“System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/ Remote Desktop Message.app/Contents/Resources/Japanese.lproj/UIAgent.nib”。
    2012-07-18 17:15:45 +1000: “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/Japanese.lproj/MainMenu.nib”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
    2012-07-18 17:15:45 +1000: 已修復“System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents /Support/LockScreen.app/Contents/Resources/Japanese.lproj/MainMenu.nib”。
    2012-07-18 17:15:45 +1000: “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/Japanese.lproj/MainMenu.nib”上的 權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
    2012-07-18 17:15:45 +1000: 已修復“System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents /Support/LockScreenLeopard386.app/Contents/Resources/Japanese.lproj/MainMenu.nib ”。
    2012-07-18 17:17:05 +1000: “System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/English.lproj/RemoteDesktopMenu.ni b”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
    2012-07-18 17:17:05 +1000: 已修復“System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/Resources/English.lproj/RemoteDesktopMenu.ni b”。
    2012-07-18 17:17:06 +1000: 警告：SUID 檔“System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDA gent”已修改，且將不會進行修復。
    2012-07-18 17:17:06 +1000: “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/Rem ote Desktop Message.app/Contents/Resources/English.lproj/UIAgent.nib”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
    2012-07-18 17:17:06 +1000: 已修復“System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Support/ Remote Desktop Message.app/Contents/Resources/English.lproj/UIAgent.nib”。
    2012-07-18 17:17:06 +1000: “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreen.app/Contents/Resources/English.lproj/MainMenu.nib”上的權限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
    2012-07-18 17:17:06 +1000: 已修復“System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents /Support/LockScreen.app/Contents/Resources/English.lproj/MainMenu.nib”。
    2012-07-18 17:17:06 +1000: “System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/LockScreenLeopard386.app/Contents/Resources/English.lproj/MainMenu.nib”上的權 限不同，應該為 drwxr-xr-x ，它們為 -rw-r--r-- 。
    2012-07-18 17:17:06 +1000: 已修復“System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents /Support/LockScreenLeopard386.app/Contents/Resources/English.lproj/MainMenu.nib” 。
    2012-07-18 17:17:12 +1000: “System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/libruby.dylib”上的 權限不同，應該為 lrwxrwxrwx ，它們為 lrwxr-xr-x 。
    2012-07-18 17:17:12 +1000: 已修復“System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/libruby.dylib ”。
    2012-07-18 17:17:47 +1000: “usr/libexec/cups/backend/fax”上的權限不同，應該為 lrwx------ ，它們為 lrwxr-xr-x 。
    2012-07-18 17:17:47 +1000: 已修復“usr/libexec/cups/backend/fax”。
    2012-07-18 17:17:52 +1000: “Library/Application Support/Apple/ParentalControls”上的權限不同，應該為 drwxrwxr-x ，它們為 drwxr-xr-x 。
    2012-07-18 17:17:52 +1000: 已修復“Library/Application Support/Apple/ParentalControls”。
    2012-07-18 17:17:52 +1000: “Library/Application Support/Apple/ParentalControls/ALRHelperJobs”上的權限不同，應該為 drwxrwxr-x ，它們為 drwxr-xr-x 。
    2012-07-18 17:17:52 +1000: 已修復“Library/Application Support/Apple/ParentalControls/ALRHelperJobs”。
    2012-07-18 17:18:12 +1000:
    2012-07-18 17:18:12 +1000: 權限修復完成
    2012-07-18 17:18:12 +1000:
    2012-07-18 17:18:13 +1000:
    2012-07-18 22:19:33 +1000: “磁碟工具程式”已啟動。
    2012-07-18 22:21:36 +1000: “磁碟工具程式”已啟動。
    2012-07-18 22:22:34 +1000: “磁碟工具程式”已啟動。
    2012-07-18 22:22:47 +1000: 正在製作映像檔“Macintosh HD.dmg”
    2012-07-18 22:22:55 +1000:     正在準備用來製作映像檔的引擎⋯
    2012-07-18 22:23:03 +1000:     正在讀取整個磁碟 (Apple_HFS : 0)⋯

    I called Apple Support after getting no usuable help through the Apple Forums. The rep felt is was a problem with the two older USB 2.0 drives compatablility with the Retina Macbook Pro's USB 3.0. He kindly offered to send me a Compatable USB 3.0 Drive, but could not offer a solution.
    FYI, I tried using different cords and both USB 3.0 ports on my Retina MacBook Pro and both are self powered.
    Thanks,
    Chris

  • Unable to use Disk Utility to repair disk.

    Hi all
    I have been having some problems trying to transfer movies from computer to my iPod. Someone just suggested that I use Disk Utility to verify disk permissions, as well as the disk. I was able to verify disk permissions and repair them. Noticed the some had something to do with iTunes, so that might fix my problem with transferring movies to my iPod. I then tried to verify the disk, but I got the following error "Error: The underlying task reported failure on exit." Also this program shows that the following "Checking volume bitmap.
    Volume Bit Map needs minor repair
    Checking volume information.
    The volume Macintosh HD needs to be repaired.
    Error: The underlying task reported failure on exit
    1 HFS volume checked
    Volume needs repair"
    The <Repair Disk> button is not darkened, but is grey, such that is not an option. Any other way to repair this disk.
    Thanks
    Michael

    The startup drive can only be repaired from another drive.
    You have to boot from the install disk.
    To do this: Insert the Install Disk 1 into the drive and then select Restart; when you hear the chime hold down C key until the apple logo appears.
    This will take you to the installation software, but you do not want to install.
    Select your language, then go up to the top menu bar to Utilities in 10.4 and navigate to the Disk Utility application.
    Select the start up drive, then go to the First Aid pane where you can click on Repair Disk.
    If it finds errors, repeat the process until it reports no errors.
    After these repairs, quit the application, and restart normally.
    Once restarted normally run Repair Permissions from the Disk Utility application found on your hard drive in Application/Utilities.

  • Disk Utility and Repair Disk Permissions

    Using Yosemite 10.10.3 , an this is what I see every time I run the Disk Utility.  Then I select 'Repair Disk Permissions' but nothing ever gets fixed. Whats the point of the 'Repair' button if nothing ever gets repaired??  Should I not believe the results of 'Verify Disk" either??
    Verifying permissions for “Macintosh HD”Group differs on “Library/Printers/InstalledPrinters.plist”; should be 80; group is 0.Permissions differ on “Library/Printers/InstalledPrinters.plist”; should be -rw-rw-rw- ; they are -rw-r--r-- .User differs on “private/var/db/displaypolicyd”; should be 0; user is 244.Group differs on “private/var/db/displaypolicyd”; should be 0; group is 244.

    You can safely ignore those.
    Mac OS X Disk utilities Repair Disc Permissions messages that you can safely ignore
    https://support.apple.com/en-us/HT203172

  • Disk Utility - Cannot repair disk (USB)

    Hey guys,
    I was copying some movies to my USB stick when it seemed to get all buggy on me, and ejected itself. However, it seems to have been corrupted during the process.
    Now I have tried to format the USB. I am able to watch content from it and also copy it back over to my desktop but I cant delete anything from it nor can I repair it in Disk Utility after I veryify the disk.
    Here are some images:

    Sorry I should have also included the following:

  • Using Disk Utility to repair disk not working

    Hi, I don't notice any issues with my Mac but I would like to check and repair disk errors anyway. I inserted the install disk that came with my Mac, pressed the C Key while the computer restarted, afterewards I get a menu showing my mouse. What did I do wrong? Any help is greatly appreciated

    Without using the correct software shutdown and normally being able
    to quit open and running applications, utilities or the System, there is
    a chance that repairable issues may result. And in some cases, there
    may be a fair chance of damages to the OSX and applications.
    Problems with the Directory and other drive/storage files could be
    damaged and they may need repairs; if Disk Utility can't do them
    then other tools should be used. Disk Warrior can help in some areas
    where other utilities cannot do the same job or do it as well. Specialized
    tools and some more general ones allow you to restore functions in a
    computer's hard drive through various means.
    If you do not have a full backup of your computer's hard disk drive, and
    then do not have the affordable luxury of wiping the damaged drive,
    zeroing it from the booted Installer's Disk Utility options, and then being
    able to clone back a complete computer clone from an external hard
    disk drive, then you have to see about trying to repair the damage in
    the only drive you have. You can be ready ahead of time, to choose one
    or another, or both paths. Options are good when you have & control them.
    Be sure your third-party disk utilities are compatible with your computer's
    OS X version and also with the hardware configuration. Given there are
    some computers not running the latest OS X due to non-support, the
    utility chosen has to also match with attention to detail, to avoid problems.
    Good luck & happy computing!

  • How to use disk utility regarding repairing disk prmission?

    I am using OS V.10.4.11, and my installation DVD have 10.4.8 OS version.
    After erase and install the 10.4.8, i updated the OS to 10.4.11.
    After starting up in regular boot the disk permission shows- Permission differs System/library/user template should be drwx--- they are drwxr-xr-x.
    After starting up from installation dvd-1, disk permission shows- permission differs system/library/user template should be drwxr-xr-x they are drwx---
    I don't know which one is correct. And also confused about which one that i should use for disk maintainance. The one with start-up disk or that one with installtion disk? Please help me.

    As Dave said, permissions should be repaired from Disk Utility in Applications>Utilities.
    A permissions differ message isn't necessarily a problem; it's a notification more than anything else.
    If you're worried, download and install the 10.4.11 combo update again, then run the repair permissions once more. If they remain unchanged, and you're not having any troubles, don't worry about it.
    ~Lyssa

  • Disk Utility Problems - Repair Disk Permissions

    Hello,
    I recently updated my iMac and Macbook to Leopard and have had some problems with repairing permissions. Like usual, before an update or install as well as after I like to run my repair permissions tool. On both machines it takes FOREVER and I'm getting these errors everytime on my Macbook:
    Repairing permissions for “Macintosh HD”
    Warning: SUID file "usr/libexec/load_hdi" has been modified and will not be repaired.
    Warning: SUID file "System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/Resources /DiskManagementTool" has been modified and will not be repaired.
    Warning: SUID file "System/Library/PrivateFrameworks/DesktopServicesPriv.framework/Versions/A/Reso urces/Locum" has been modified and will not be repaired.
    Warning: SUID file "System/Library/PrivateFrameworks/Install.framework/Versions/A/Resources/runner " has been modified and will not be repaired.
    Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/readconf ig" has been modified and will not be repaired.
    Warning: SUID file "System/Library/PrivateFrameworks/Admin.framework/Versions/A/Resources/writecon fig" has been modified and will not be repaired.
    Warning: SUID file "usr/libexec/authopen" has been modified and will not be repaired.
    Warning: SUID file "System/Library/CoreServices/Finder.app/Contents/Resources/OwnerGroupTool" has been modified and will not be repaired.
    Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
    Permissions repair complete
    Any help?

    If you choose to get rid of them by reinstalling 10.5.1, you have to do it from the downloads page, and use the full 110 MB version. In my case, though, there is still one left - something about the remote desktop. Also, it still takes a long time to repair permissions, and my fans whir like crazy. Apparently a lot of people are having this problem, and Apple is aware of it, so maybe we'll have a fix soon.

  • Using Disk Utility to repair Permissions

    Hi there,
    When running Disk Utility to Repair Permissions, why does it do it's job and then when you run it again to check, the same files are still being listed again as repaired?
    Thanks.

    What; are the messages that keep coming up in the show results window?  What system are you running?
    Are they like those described in this Apple document: Mac OS X: Disk Utility's Repair Disk Permissions messages that you can safely ignore
    OT

  • Time machine: An error occurred while copying files. The problem could be temporary. If the problem persists, use Disk Utility to repair your backup disk.

    Time machine backups are failing. I've followed the instructions I found on the Time Machine troubleshooting page (http://pondini.org/TM/Troubleshooting.html) but have gotten to where I don't know what to do next.
    Sequence of events:
    The main error message is always:
    An error occurred while copying files. The problem could be temporary. If the problem persists, use Disk Utility to repair your backup disk.
    Yesterday, I opened Disk Utility and verified the disk. Got this error:
    Error: This disk needs to be repaired using the Recovery HD. Restart your computer, holding down the Command key and the R key until you see the Apple logo. When the OS X Utilities window appears, choose Disk Utility.
    I ran Disk Utility and repaired the hard drive. Then I manually started the backup before going to bed, figuring it was going to take a long time to run. When I got up this morning, the backup had failed with the same "could be temporary" error. I checked the log, which says:
    Starting manual backup
    Attempting to mount network destination URL: afp://Tery%20Griffin;[email protected]/Tery%20Griffin's%20Time%20Ca psule
    Mounted network destination at mount point: /Volumes/Tery Griffin's Time Capsule using URL: afp://Tery%20Griffin;[email protected]/Tery%20Griffin's%20Time%20Ca psule
    Disk image /Volumes/Tery Griffin's Time Capsule/Tery Griffin’s Computer (44).sparsebundle mounted at: /Volumes/Time Machine Backups
    Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
    Event store UUIDs don't match for volume: Macintosh HD
    Error: (-36) Applying backup protections to /Volumes/Time Machine Backups/Backups.backupdb/Tery Griffin’s Computer (44)/2014-03-05-201742.inProgress/ABB10CF2-F041-4DE5-B6AE-3C228B59ADCC
    Error: (5) setxattr for key:com.apple.backupd.SnapshotStartDate path:/Volumes/Time Machine Backups/Backups.backupdb/Tery Griffin’s Computer (44)/2014-03-05-201742.inProgress/ABB10CF2-F041-4DE5-B6AE-3C228B59ADCC size:17
    Error: (5) setxattr for key:com.apple.backupd.SnapshotState path:/Volumes/Time Machine Backups/Backups.backupdb/Tery Griffin’s Computer (44)/2014-03-05-201742.inProgress/ABB10CF2-F041-4DE5-B6AE-3C228B59ADCC size:2
    Deep event scan at path:/ reason:must scan subdirs|new event db|
    Finished scan
    Found 145601 files (11.88 GB) needing backup
    16.1 GB required (including padding), 620.77 GB available
    Copied Zero KB of 11.88 GB, 0 of 145601 items
    Copied 0 files (Zero KB) from volume Macintosh HD.
    Copy stage failed with error:11
    Backup failed with error: 11
    Ejected Time Machine disk image: /Volumes/Tery Griffin's Time Capsule/Tery Griffin’s Computer (44).sparsebundle
    Ejected Time Machine network volume.
    Starting automatic backup
    Attempting to mount network destination URL: afp://Tery%20Griffin;[email protected]/Tery%20Griffin's%20Time%20Ca psule
    Mounted network destination at mount point: /Volumes/Tery Griffin's Time Capsule using URL: afp://Tery%20Griffin;[email protected]/Tery%20Griffin's%20Time%20Ca psule
    Disk image /Volumes/Tery Griffin's Time Capsule/Tery Griffin’s Computer (44).sparsebundle mounted at: /Volumes/Time Machine Backups
    Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
    Event store UUIDs don't match for volume: Macintosh HD
    Error: (-36) Applying backup protections to /Volumes/Time Machine Backups/Backups.backupdb/Tery Griffin’s Computer (44)/2014-03-05-201742.inProgress/9F8E7957-9C50-49C3-8314-880E5203E3D9
    Error: (5) setxattr for key:com.apple.backupd.SnapshotStartDate path:/Volumes/Time Machine Backups/
    Does anyone know what the problem is here and what I should do?
    Thanks,
    Tery

    You have repaired your boot drive (which is good) but have you repaired your time machine drive?  I don't own a Time Capsule so I don't know if disk utility can operate on it.  If it can, you should repair it as well.  You may need to erase it and start a new backup.  That happens to time machine volumes from time to time and is why people who are serious about their data never rely on a single source of backup.

  • DISK UTILITY STOPPED REPAIRING MACINTOSH HD!

    So initially, my mac just was stuck on the white screen with grey apple logo and the spinning wheel. It wouldn't move! So I held down the power button and turned it off, let it rest for good 8 hours, turned it back on and it was still the same! With the help of some online postings: command + control + p + r, I got to the Disk Utility page and I tried checking for any damage. For most part everything was"ok" or "clear"! Then I ran 'VERIFY DISK' for MACINTOSH HD and some problems occurred. I clicked on 'REPAIR DISK' as promted. It said "DISK UTILITY STOPPED REPAIRING MACINTOSH HD: Disk Utitlity can't repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
    I HAVE ABSOLUTELY NO IDEA HOW TO DO THAT ! I have not backed up a single thing on my mac!

    If you want to preserve the data on the boot drive, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data, you can skip this step.
    There are several ways to back up a Mac that is unable to fully boot. You need an external hard drive to hold the backup data.
    1. Boot from the Recovery partition or from a local Time Machine backup volume (option key at startup.) Launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
    2. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    3. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.

  • Disk Utility stopped repairing Mac HD - Now what?

    My computer has been running slow so I cleaned up my desktop, trashed a bunch of old files and went to verify permissions. I was then told to use disk repair.
    In the middle of doing so I got this message - "Disk Utility stopped repairing 'Macintosh HD'. Disk Utility can't repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files."
    Besides occasional slowness, my computer is working fine and I was able to get back to my desktop. Is this slow down issue going to get progressively worse if I don't reformat the disk? Should I do what the message says? If so, how? I've never reformatted before...it sounds a little scary.
    I back up about once a week (just did so this morning) so I should be good to go there. I have AppleCare. Is this something I should bring the computer in for or can I fix this issue on my own?
    Thanks in advance for any help.

    Do as instructed. Get your self a backup drive if you don't have one. Backup your files. Then erase your OS X volume and reinstall Mountain Lion.
    Install or Reinstall Lion/Mountain Lion from Scratch
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Erase the hard drive:
      1. Select Disk Utility from the main menu and click on the Continue button.
      2. After DU loads select your startup volume (usually Macintosh HD) from the
          left side list. Click on the Erase tab in the DU main window.
      3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
            the Security button and set the Zero Data option to one-pass. Click on
          the Erase button and wait until the process has completed.
      4. Quit DU and return to the main menu.
    Reinstall Lion: Select Reinstall Lion/Mountain Lion and click on the Install button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
                because it is three times faster than wireless.

  • TS1440 I followed all of the directions after seeing that my laptop flashed the folder with the question mark. But when I went to disk utility to repair/ verify issues w/ start up disk it would not allow me to.button to repair/verify is there but cant be

    I followed all of the directions after seeing that my laptop flashed the folder with the question mark. But when I went to disk utility to repair/ verify issues w/ start up disk it would not allow me to. The buttons to repair and modify we're there but they were grey and couldn't be pressed.

    Were you trying to repair the disk you were booted from? You can't do that - you need to boot from your install disk, and choose 'Disk Utility' from the 'install' menu.

  • Have a mac book pro that crashed. ran disk utility to repair. comp booted and ran for short time. then crashed. ran repair again. disk utility said it could not repair files and i needed to format hard drive and start again. now nothing works

    have a mac book pro that crashed. ran disk utility to repair. comp booted and ran for short time. then crashed. ran repair again. disk utility said it could not repair disk and needed to format and start again.
    comp said it could not unmount disk and now when comp trys to boot all i get is a question mark on the screen. help

    Erase and Install
    1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
    4. Quit DU after formatting completes and return to the installer. Install Snow Leopard.
    5. After restart into Snow Leopard download and install Mac OS X 10.6.8 Update Combo v1.1.

Maybe you are looking for

  • HTC One M8 1800 MHz LTE Band

    According to HTC.com, this phone has the 1800 MHz LTE band (LTE band 3). I am currently in Australia, using a Telstra LTE SIM, and I can't pick up LTE on my phone. I tested this SIM in another phone and it gets LTE, so the problem isn't the lack of r

  • I need to be able to save a ps or indd file directly to my cloud.

    Ideally there would be a 'save to cloud' button or something like as part of the save menu. I can't find how to do thsi, so help appreciated. I can upload files to the cloud, but haven't found out how to save them directly from ps or indd. Thanks

  • Why is Noise Reduction only available with some raw files

    I  have been going through my CRW, CR, and CR2 raw files and have noticed that some, when opened in ACR, do not allow me to adjust all the parameters in Noise Reduction.  I thought it might be ISO related, but with a group of identically created raw

  • HT3964 Power issue with iMac

    i have the 27" 2012 imac,and the last few days,the power buttonisnt responding,when its in sleep mode it wont power back up and im having to reset it by unplugging it from the wall,is or has anyone else experienced this and is there anything i can do

  • How can I save an email as PDF?

    Hello everyone, I'm looking for some app that allows me to save an email as a PDF file. I know that before iOS 5 this was possibile, but I sound like to know how to do it now,both for iPhone and iPad. Thank you, Fabio